Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 1112b4e509c5772610ad19a3ea399afd667c46a5 / . / arch / arm / dts / imx6qdl-gw53xx.dtsi
blob: 64bb88dc745a060b01ede8a988abeeefabd582cf [file] [log] [blame]
Tim Harvey295c8f92021-03-01 14:33:30 -0800[diff] [blame]1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright 2013 Gateworks Corporation
4 */
5
6#include <dt-bindings/gpio/gpio.h>
7#include <dt-bindings/input/linux-event-codes.h>
8#include <dt-bindings/interrupt-controller/irq.h>
9
10/ {
11 /* these are used by bootloader for disabling nodes */
12 aliases {
13 led0 = &led0;
14 led1 = &led1;
15 led2 = &led2;
16 nand = &gpmi;
17 ssi0 = &ssi1;
18 usb0 = &usbh1;
19 usb1 = &usbotg;
20 };
21
22 chosen {
23 bootargs = "console=ttymxc1,115200";
24 };
25
26 backlight {
27 compatible = "pwm-backlight";
28 pwms = <&pwm4 0 5000000>;
29 brightness-levels = <0 4 8 16 32 64 128 255>;
30 default-brightness-level = <7>;
31 };
32
33 gpio-keys {
34 compatible = "gpio-keys";
35 #address-cells = <1>;
36 #size-cells = <0>;
37
38 user-pb {
39 label = "user_pb";
40 gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
41 linux,code = <BTN_0>;
42 };
43
44 user-pb1x {
45 label = "user_pb1x";
46 linux,code = <BTN_1>;
47 interrupt-parent = <&gsc>;
48 interrupts = <0>;
49 };
50
51 key-erased {
52 label = "key-erased";
53 linux,code = <BTN_2>;
54 interrupt-parent = <&gsc>;
55 interrupts = <1>;
56 };
57
58 eeprom-wp {
59 label = "eeprom_wp";
60 linux,code = <BTN_3>;
61 interrupt-parent = <&gsc>;
62 interrupts = <2>;
63 };
64
65 tamper {
66 label = "tamper";
67 linux,code = <BTN_4>;
68 interrupt-parent = <&gsc>;
69 interrupts = <5>;
70 };
71
72 switch-hold {
73 label = "switch_hold";
74 linux,code = <BTN_5>;
75 interrupt-parent = <&gsc>;
76 interrupts = <7>;
77 };
78 };
79
80 leds {
81 compatible = "gpio-leds";
82 pinctrl-names = "default";
83 pinctrl-0 = <&pinctrl_gpio_leds>;
84
85 led0: user1 {
86 label = "user1";
87 gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
88 default-state = "on";
89 linux,default-trigger = "heartbeat";
90 };
91
92 led1: user2 {
93 label = "user2";
94 gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
95 default-state = "off";
96 };
97
98 led2: user3 {
99 label = "user3";
100 gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
101 default-state = "off";
102 };
103 };
104
105 memory@10000000 {
106 device_type = "memory";
107 reg = <0x10000000 0x40000000>;
108 };
109
110 pps {
111 compatible = "pps-gpio";
112 pinctrl-names = "default";
113 pinctrl-0 = <&pinctrl_pps>;
114 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
115 status = "okay";
116 };
117
118 reg_1p0v: regulator-1p0v {
119 compatible = "regulator-fixed";
120 regulator-name = "1P0V";
121 regulator-min-microvolt = <1000000>;
122 regulator-max-microvolt = <1000000>;
123 regulator-always-on;
124 };
125
126 reg_3p3v: regulator-3p3v {
127 compatible = "regulator-fixed";
128 regulator-name = "3P3V";
129 regulator-min-microvolt = <3300000>;
130 regulator-max-microvolt = <3300000>;
131 regulator-always-on;
132 };
133
134 reg_usb_h1_vbus: regulator-usb-h1-vbus {
135 compatible = "regulator-fixed";
136 regulator-name = "usb_h1_vbus";
137 regulator-min-microvolt = <5000000>;
138 regulator-max-microvolt = <5000000>;
139 regulator-always-on;
140 };
141
142 reg_usb_otg_vbus: regulator-usb-otg-vbus {
143 compatible = "regulator-fixed";
144 regulator-name = "usb_otg_vbus";
145 regulator-min-microvolt = <5000000>;
146 regulator-max-microvolt = <5000000>;
147 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
148 enable-active-high;
149 };
150
151 sound {
152 compatible = "fsl,imx6q-ventana-sgtl5000",
153 "fsl,imx-audio-sgtl5000";
154 model = "sgtl5000-audio";
155 ssi-controller = <&ssi1>;
156 audio-codec = <&codec>;
157 audio-routing =
158 "MIC_IN", "Mic Jack",
159 "Mic Jack", "Mic Bias",
160 "Headphone Jack", "HP_OUT";
161 mux-int-port = <1>;
162 mux-ext-port = <4>;
163 };
164};
165
166&audmux {
167 pinctrl-names = "default";
168 pinctrl-0 = <&pinctrl_audmux>;
169 status = "okay";
170};
171
172&can1 {
173 pinctrl-names = "default";
174 pinctrl-0 = <&pinctrl_flexcan1>;
175 status = "okay";
176};
177
178&clks {
179 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
180 <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
181 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
182 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
183};
184
185&fec {
186 pinctrl-names = "default";
187 pinctrl-0 = <&pinctrl_enet>;
188 phy-mode = "rgmii-id";
189 phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
190 status = "okay";
191};
192
193&gpmi {
194 pinctrl-names = "default";
195 pinctrl-0 = <&pinctrl_gpmi_nand>;
196 status = "okay";
197};
198
199&hdmi {
200 ddc-i2c-bus = <&i2c3>;
201 status = "okay";
202};
203
204&i2c1 {
205 clock-frequency = <100000>;
206 pinctrl-names = "default";
207 pinctrl-0 = <&pinctrl_i2c1>;
208 status = "okay";
209
210 gsc: gsc@20 {
211 compatible = "gw,gsc";
212 reg = <0x20>;
213 interrupt-parent = <&gpio1>;
214 interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
215 interrupt-controller;
216 #interrupt-cells = <1>;
217 #size-cells = <0>;
218
219 adc {
220 compatible = "gw,gsc-adc";
221 #address-cells = <1>;
222 #size-cells = <0>;
223
224 channel@0 {
225 gw,mode = <0>;
226 reg = <0x00>;
227 label = "temp";
228 };
229
230 channel@2 {
231 gw,mode = <1>;
232 reg = <0x02>;
233 label = "vdd_vin";
234 };
235
236 channel@5 {
237 gw,mode = <1>;
238 reg = <0x05>;
239 label = "vdd_3p3";
240 };
241
242 channel@8 {
243 gw,mode = <1>;
244 reg = <0x08>;
245 label = "vdd_bat";
246 };
247
248 channel@b {
249 gw,mode = <1>;
250 reg = <0x0b>;
251 label = "vdd_5p0";
252 };
253
254 channel@e {
255 gw,mode = <1>;
256 reg = <0xe>;
257 label = "vdd_arm";
258 };
259
260 channel@11 {
261 gw,mode = <1>;
262 reg = <0x11>;
263 label = "vdd_soc";
264 };
265
266 channel@14 {
267 gw,mode = <1>;
268 reg = <0x14>;
269 label = "vdd_3p0";
270 };
271
272 channel@17 {
273 gw,mode = <1>;
274 reg = <0x17>;
275 label = "vdd_1p5";
276 };
277
278 channel@1d {
279 gw,mode = <1>;
280 reg = <0x1d>;
281 label = "vdd_1p8";
282 };
283
284 channel@20 {
285 gw,mode = <1>;
286 reg = <0x20>;
287 label = "vdd_1p0";
288 };
289
290 channel@23 {
291 gw,mode = <1>;
292 reg = <0x23>;
293 label = "vdd_2p5";
294 };
295
296 channel@26 {
297 gw,mode = <1>;
298 reg = <0x26>;
299 label = "vdd_gps";
300 };
301
302 channel@29 {
303 gw,mode = <1>;
304 reg = <0x29>;
305 label = "vdd_an1";
306 };
307 };
308 };
309
310 gsc_gpio: gpio@23 {
311 compatible = "nxp,pca9555";
312 reg = <0x23>;
313 gpio-controller;
314 #gpio-cells = <2>;
315 interrupt-parent = <&gsc>;
316 interrupts = <4>;
317 };
318
319 eeprom1: eeprom@50 {
320 compatible = "atmel,24c02";
321 reg = <0x50>;
322 pagesize = <16>;
323 };
324
325 eeprom2: eeprom@51 {
326 compatible = "atmel,24c02";
327 reg = <0x51>;
328 pagesize = <16>;
329 };
330
331 eeprom3: eeprom@52 {
332 compatible = "atmel,24c02";
333 reg = <0x52>;
334 pagesize = <16>;
335 };
336
337 eeprom4: eeprom@53 {
338 compatible = "atmel,24c02";
339 reg = <0x53>;
340 pagesize = <16>;
341 };
342
343 rtc: ds1672@68 {
344 compatible = "dallas,ds1672";
345 reg = <0x68>;
346 };
347};
348
349&i2c2 {
350 clock-frequency = <100000>;
351 pinctrl-names = "default";
352 pinctrl-0 = <&pinctrl_i2c2>;
353 status = "okay";
354
355 ltc3676: pmic@3c {
356 compatible = "lltc,ltc3676";
357 reg = <0x3c>;
358 interrupt-parent = <&gpio1>;
359 interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
360
361 regulators {
362 /* VDD_SOC (1+R1/R2 = 1.635) */
363 reg_vdd_soc: sw1 {
364 regulator-name = "vddsoc";
365 regulator-min-microvolt = <674400>;
366 regulator-max-microvolt = <1308000>;
367 lltc,fb-voltage-divider = <127000 200000>;
368 regulator-ramp-delay = <7000>;
369 regulator-boot-on;
370 regulator-always-on;
371 };
372
373 /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
374 reg_1p8v: sw2 {
375 regulator-name = "vdd1p8";
376 regulator-min-microvolt = <1033310>;
377 regulator-max-microvolt = <2004000>;
378 lltc,fb-voltage-divider = <301000 200000>;
379 regulator-ramp-delay = <7000>;
380 regulator-boot-on;
381 regulator-always-on;
382 };
383
384 /* VDD_ARM (1+R1/R2 = 1.635) */
385 reg_vdd_arm: sw3 {
386 regulator-name = "vddarm";
387 regulator-min-microvolt = <674400>;
388 regulator-max-microvolt = <1308000>;
389 lltc,fb-voltage-divider = <127000 200000>;
390 regulator-ramp-delay = <7000>;
391 regulator-boot-on;
392 regulator-always-on;
393 };
394
395 /* VDD_DDR (1+R1/R2 = 2.105) */
396 reg_vdd_ddr: sw4 {
397 regulator-name = "vddddr";
398 regulator-min-microvolt = <868310>;
399 regulator-max-microvolt = <1684000>;
400 lltc,fb-voltage-divider = <221000 200000>;
401 regulator-ramp-delay = <7000>;
402 regulator-boot-on;
403 regulator-always-on;
404 };
405
406 /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
407 reg_2p5v: ldo2 {
408 regulator-name = "vdd2p5";
409 regulator-min-microvolt = <2490375>;
410 regulator-max-microvolt = <2490375>;
411 lltc,fb-voltage-divider = <487000 200000>;
412 regulator-boot-on;
413 regulator-always-on;
414 };
415
416 /* VDD_AUD_1P8: Audio codec */
417 reg_aud_1p8v: ldo3 {
418 regulator-name = "vdd1p8a";
419 regulator-min-microvolt = <1800000>;
420 regulator-max-microvolt = <1800000>;
421 regulator-boot-on;
422 };
423
424 /* VDD_HIGH (1+R1/R2 = 4.17) */
425 reg_3p0v: ldo4 {
426 regulator-name = "vdd3p0";
427 regulator-min-microvolt = <3023250>;
428 regulator-max-microvolt = <3023250>;
429 lltc,fb-voltage-divider = <634000 200000>;
430 regulator-boot-on;
431 regulator-always-on;
432 };
433 };
434 };
435};
436
437&i2c3 {
438 clock-frequency = <100000>;
439 pinctrl-names = "default";
440 pinctrl-0 = <&pinctrl_i2c3>;
441 status = "okay";
442
443 codec: sgtl5000@a {
444 compatible = "fsl,sgtl5000";
445 reg = <0x0a>;
446 clocks = <&clks IMX6QDL_CLK_CKO>;
447 VDDA-supply = <&reg_1p8v>;
448 VDDIO-supply = <&reg_3p3v>;
449 };
450
451 touchscreen: egalax_ts@4 {
452 compatible = "eeti,egalax_ts";
453 reg = <0x04>;
454 interrupt-parent = <&gpio1>;
455 interrupts = <11 2>;
456 wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
457 };
458
459 accel@1e {
460 compatible = "nxp,fxos8700";
461 reg = <0x1e>;
462 };
463};
464
465&ldb {
466 status = "okay";
467
468 lvds-channel@0 {
469 fsl,data-mapping = "spwg";
470 fsl,data-width = <18>;
471 status = "okay";
472
473 display-timings {
474 native-mode = <&timing0>;
475 timing0: hsd100pxn1 {
476 clock-frequency = <65000000>;
477 hactive = <1024>;
478 vactive = <768>;
479 hback-porch = <220>;
480 hfront-porch = <40>;
481 vback-porch = <21>;
482 vfront-porch = <7>;
483 hsync-len = <60>;
484 vsync-len = <10>;
485 };
486 };
487 };
488};
489
490&pcie {
491 pinctrl-names = "default";
492 pinctrl-0 = <&pinctrl_pcie>;
493 reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
494 status = "okay";
495};
496
497&pwm2 {
498 pinctrl-names = "default";
499 pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
500 status = "disabled";
501};
502
503&pwm3 {
504 pinctrl-names = "default";
505 pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
506 status = "disabled";
507};
508
509&pwm4 {
510 #pwm-cells = <2>;
511 pinctrl-names = "default";
512 pinctrl-0 = <&pinctrl_pwm4>;
513 status = "okay";
514};
515
516&ssi1 {
517 status = "okay";
518};
519
520&uart1 {
521 pinctrl-names = "default";
522 pinctrl-0 = <&pinctrl_uart1>;
523 rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
524 status = "okay";
525};
526
527&uart2 {
528 pinctrl-names = "default";
529 pinctrl-0 = <&pinctrl_uart2>;
530 status = "okay";
531};
532
533&uart5 {
534 pinctrl-names = "default";
535 pinctrl-0 = <&pinctrl_uart5>;
536 status = "okay";
537};
538
539&usbotg {
540 vbus-supply = <&reg_usb_otg_vbus>;
541 pinctrl-names = "default";
542 pinctrl-0 = <&pinctrl_usbotg>;
543 disable-over-current;
Tim Harvey3deb9892021-03-01 14:33:31 -0800[diff] [blame]544 dr_mode = "otg";
Tim Harvey295c8f92021-03-01 14:33:30 -0800[diff] [blame]545 status = "okay";
546};
547
548&usbh1 {
549 vbus-supply = <&reg_usb_h1_vbus>;
550 status = "okay";
551};
552
553&usdhc3 {
554 pinctrl-names = "default", "state_100mhz", "state_200mhz";
555 pinctrl-0 = <&pinctrl_usdhc3>;
556 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
557 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
558 cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
559 vmmc-supply = <&reg_3p3v>;
560 no-1-8-v; /* firmware will remove if board revision supports */
561 status = "okay";
562};
563
564&wdog1 {
565 pinctrl-names = "default";
566 pinctrl-0 = <&pinctrl_wdog>;
567 fsl,ext-reset-output;
568};
569
570&iomuxc {
571 pinctrl_audmux: audmuxgrp {
572 fsl,pins = <
573 MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
574 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
575 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
576 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
577 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */
578 >;
579 };
580
581 pinctrl_enet: enetgrp {
582 fsl,pins = <
583 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
584 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
585 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
586 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
587 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
588 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
589 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
590 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
591 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
592 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
593 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
594 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
595 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
596 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
597 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
598 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
599 >;
600 };
601
602 pinctrl_flexcan1: flexcan1grp {
603 fsl,pins = <
604 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
605 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
606 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */
607 >;
608 };
609
610 pinctrl_gpio_leds: gpioledsgrp {
611 fsl,pins = <
612 MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
613 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
614 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
615 >;
616 };
617
618 pinctrl_gpmi_nand: gpminandgrp {
619 fsl,pins = <
620 MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
621 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
622 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
623 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
624 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
625 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
626 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
627 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
628 MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
629 MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
630 MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
631 MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
632 MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
633 MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
634 MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
635 >;
636 };
637
638 pinctrl_i2c1: i2c1grp {
639 fsl,pins = <
640 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
641 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
642 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
643 >;
644 };
645
646 pinctrl_i2c2: i2c2grp {
647 fsl,pins = <
648 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
649 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
650 >;
651 };
652
653 pinctrl_i2c3: i2c3grp {
654 fsl,pins = <
655 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
656 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
657 >;
658 };
659
660 pinctrl_pcie: pciegrp {
661 fsl,pins = <
662 MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
663 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */
664 >;
665 };
666
667 pinctrl_pmic: pmicgrp {
668 fsl,pins = <
669 MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
670 >;
671 };
672
673 pinctrl_pps: ppsgrp {
674 fsl,pins = <
675 MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
676 >;
677 };
678
679 pinctrl_pwm2: pwm2grp {
680 fsl,pins = <
681 MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
682 >;
683 };
684
685 pinctrl_pwm3: pwm3grp {
686 fsl,pins = <
687 MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
688 >;
689 };
690
691 pinctrl_pwm4: pwm4grp {
692 fsl,pins = <
693 MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
694 >;
695 };
696
697 pinctrl_uart1: uart1grp {
698 fsl,pins = <
699 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
700 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
701 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */
702 >;
703 };
704
705 pinctrl_uart2: uart2grp {
706 fsl,pins = <
707 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
708 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
709 >;
710 };
711
712 pinctrl_uart5: uart5grp {
713 fsl,pins = <
714 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
715 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
716 >;
717 };
718
719 pinctrl_usbotg: usbotggrp {
720 fsl,pins = <
721 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
722 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */
723 MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */
724 >;
725 };
726
727 pinctrl_usdhc3: usdhc3grp {
728 fsl,pins = <
729 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
730 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
731 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
732 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
733 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
734 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
735 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */
736 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059
737 >;
738 };
739
740 pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
741 fsl,pins = <
742 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
743 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
744 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
745 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
746 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
747 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
748 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */
749 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9
750 >;
751 };
752
753 pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
754 fsl,pins = <
755 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
756 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
757 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
758 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
759 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
760 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
761 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */
762 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9
763 >;
764 };
765
766 pinctrl_wdog: wdoggrp {
767 fsl,pins = <
768 MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
769 >;
770 };
771};