Marcel Ziswiler | d2b64bd | 2017-04-01 15:43:16 -0700 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (c) 2016 Toradex, Inc. |
| 3 | * |
| 4 | * SPDX-License-Identifier: GPL-2.0+ |
| 5 | */ |
| 6 | |
| 7 | #include <common.h> |
| 8 | #include <asm/arch-tegra/ap.h> |
| 9 | #include <asm/gpio.h> |
| 10 | #include <asm/io.h> |
| 11 | #include <asm/arch/gpio.h> |
| 12 | #include <asm/arch/pinmux.h> |
| 13 | #include <power/as3722.h> |
| 14 | |
| 15 | #include "../common/tdx-common.h" |
| 16 | #include "pinmux-config-apalis-tk1.h" |
| 17 | |
| 18 | #define LAN_RESET_N TEGRA_GPIO(S, 2) |
| 19 | |
| 20 | int arch_misc_init(void) |
| 21 | { |
| 22 | if (readl(NV_PA_BASE_SRAM + NVBOOTINFOTABLE_BOOTTYPE) == |
| 23 | NVBOOTTYPE_RECOVERY) |
| 24 | printf("USB recovery mode\n"); |
| 25 | |
| 26 | return 0; |
| 27 | } |
| 28 | |
| 29 | int checkboard(void) |
| 30 | { |
| 31 | puts("Model: Toradex Apalis TK1 2GB\n"); |
| 32 | |
| 33 | return 0; |
| 34 | } |
| 35 | |
| 36 | #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) |
| 37 | int ft_board_setup(void *blob, bd_t *bd) |
| 38 | { |
| 39 | return ft_common_board_setup(blob, bd); |
| 40 | } |
| 41 | #endif |
| 42 | |
| 43 | /* |
| 44 | * Routine: pinmux_init |
| 45 | * Description: Do individual peripheral pinmux configs |
| 46 | */ |
| 47 | void pinmux_init(void) |
| 48 | { |
| 49 | pinmux_clear_tristate_input_clamping(); |
| 50 | |
| 51 | gpio_config_table(apalis_tk1_gpio_inits, |
| 52 | ARRAY_SIZE(apalis_tk1_gpio_inits)); |
| 53 | |
| 54 | pinmux_config_pingrp_table(apalis_tk1_pingrps, |
| 55 | ARRAY_SIZE(apalis_tk1_pingrps)); |
| 56 | |
| 57 | pinmux_config_drvgrp_table(apalis_tk1_drvgrps, |
| 58 | ARRAY_SIZE(apalis_tk1_drvgrps)); |
| 59 | } |
| 60 | |
| 61 | #ifdef CONFIG_PCI_TEGRA |
| 62 | int tegra_pcie_board_init(void) |
| 63 | { |
| 64 | struct udevice *pmic; |
| 65 | int err; |
| 66 | |
| 67 | err = as3722_init(&pmic); |
| 68 | if (err) { |
| 69 | error("failed to initialize AS3722 PMIC: %d\n", err); |
| 70 | return err; |
| 71 | } |
| 72 | |
| 73 | err = as3722_sd_enable(pmic, 4); |
| 74 | if (err < 0) { |
| 75 | error("failed to enable SD4: %d\n", err); |
| 76 | return err; |
| 77 | } |
| 78 | |
| 79 | err = as3722_sd_set_voltage(pmic, 4, 0x24); |
| 80 | if (err < 0) { |
| 81 | error("failed to set SD4 voltage: %d\n", err); |
| 82 | return err; |
| 83 | } |
| 84 | |
| 85 | err = as3722_gpio_configure(pmic, 1, AS3722_GPIO_OUTPUT_VDDH | |
| 86 | AS3722_GPIO_INVERT); |
| 87 | if (err < 0) { |
| 88 | error("failed to configure GPIO#1 as output: %d\n", err); |
| 89 | return err; |
| 90 | } |
| 91 | |
| 92 | err = as3722_gpio_direction_output(pmic, 2, 1); |
| 93 | if (err < 0) { |
| 94 | error("failed to set GPIO#2 high: %d\n", err); |
| 95 | return err; |
| 96 | } |
| 97 | |
| 98 | /* Reset I210 Gigabit Ethernet Controller */ |
| 99 | gpio_request(LAN_RESET_N, "LAN_RESET_N"); |
| 100 | gpio_direction_output(LAN_RESET_N, 0); |
| 101 | |
| 102 | /* |
| 103 | * Make sure we don't get any back feeding from LAN_WAKE_N resp. |
| 104 | * DEV_OFF_N |
| 105 | */ |
| 106 | gpio_request(TEGRA_GPIO(O, 5), "LAN_WAKE_N"); |
| 107 | gpio_direction_output(TEGRA_GPIO(O, 5), 0); |
| 108 | |
| 109 | gpio_request(TEGRA_GPIO(O, 6), "LAN_DEV_OFF_N"); |
| 110 | gpio_direction_output(TEGRA_GPIO(O, 6), 0); |
| 111 | |
| 112 | /* Make sure LDO9 and LDO10 are initially enabled @ 0V */ |
| 113 | err = as3722_ldo_enable(pmic, 9); |
| 114 | if (err < 0) { |
| 115 | error("failed to enable LDO9: %d\n", err); |
| 116 | return err; |
| 117 | } |
| 118 | err = as3722_ldo_enable(pmic, 10); |
| 119 | if (err < 0) { |
| 120 | error("failed to enable LDO10: %d\n", err); |
| 121 | return err; |
| 122 | } |
| 123 | err = as3722_ldo_set_voltage(pmic, 9, 0x80); |
| 124 | if (err < 0) { |
| 125 | error("failed to set LDO9 voltage: %d\n", err); |
| 126 | return err; |
| 127 | } |
| 128 | err = as3722_ldo_set_voltage(pmic, 10, 0x80); |
| 129 | if (err < 0) { |
| 130 | error("failed to set LDO10 voltage: %d\n", err); |
| 131 | return err; |
| 132 | } |
| 133 | |
| 134 | mdelay(100); |
| 135 | |
| 136 | /* Make sure controller gets enabled by disabling DEV_OFF_N */ |
| 137 | gpio_set_value(TEGRA_GPIO(O, 6), 1); |
| 138 | |
| 139 | /* Enable LDO9 and LDO10 for +V3.3_ETH on patched prototypes */ |
| 140 | err = as3722_ldo_set_voltage(pmic, 9, 0xff); |
| 141 | if (err < 0) { |
| 142 | error("failed to set LDO9 voltage: %d\n", err); |
| 143 | return err; |
| 144 | } |
| 145 | err = as3722_ldo_set_voltage(pmic, 10, 0xff); |
| 146 | if (err < 0) { |
| 147 | error("failed to set LDO10 voltage: %d\n", err); |
| 148 | return err; |
| 149 | } |
| 150 | |
| 151 | mdelay(100); |
| 152 | gpio_set_value(LAN_RESET_N, 1); |
| 153 | |
| 154 | #ifdef APALIS_TK1_PCIE_EVALBOARD_INIT |
| 155 | #define PEX_PERST_N TEGRA_GPIO(DD, 1) /* Apalis GPIO7 */ |
| 156 | #define RESET_MOCI_CTRL TEGRA_GPIO(U, 4) |
| 157 | |
| 158 | /* Reset PLX PEX 8605 PCIe Switch plus PCIe devices on Apalis Evaluation |
| 159 | Board */ |
| 160 | gpio_request(PEX_PERST_N, "PEX_PERST_N"); |
| 161 | gpio_request(RESET_MOCI_CTRL, "RESET_MOCI_CTRL"); |
| 162 | gpio_direction_output(PEX_PERST_N, 0); |
| 163 | gpio_direction_output(RESET_MOCI_CTRL, 0); |
| 164 | /* Must be asserted for 100 ms after power and clocks are stable */ |
| 165 | mdelay(100); |
| 166 | gpio_set_value(PEX_PERST_N, 1); |
| 167 | /* Err_5: PEX_REFCLK_OUTpx/nx Clock Outputs is not Guaranteed Until |
| 168 | 900 us After PEX_PERST# De-assertion */ |
| 169 | mdelay(1); |
| 170 | gpio_set_value(RESET_MOCI_CTRL, 1); |
| 171 | #endif /* APALIS_T30_PCIE_EVALBOARD_INIT */ |
| 172 | |
| 173 | return 0; |
| 174 | } |
| 175 | #endif /* CONFIG_PCI_TEGRA */ |