| Dzmitry Sankouski | 0061b6f | 2021-10-17 13:45:41 +0300 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * Samsung Exynos7880 SoC device tree source |
| 4 | * |
| 5 | * Copyright (c) 2020 Dzmitry Sankouski (dsankouski@gmail.com) |
| 6 | */ |
| 7 | |
| 8 | /dts-v1/; |
| 9 | #include "skeleton.dtsi" |
| 10 | #include "exynos78x0-pinctrl.dtsi" |
| 11 | #include "exynos78x0-gpio.dtsi" |
| 12 | / { |
| 13 | compatible = "samsung,exynos7880"; |
| 14 | |
| 15 | fin_pll: xxti { |
| 16 | compatible = "fixed-clock"; |
| 17 | clock-output-names = "fin_pll"; |
| 18 | u-boot,dm-pre-reloc; |
| 19 | #clock-cells = <0>; |
| 20 | }; |
| 21 | |
| 22 | /* Dummy clock for uart */ |
| 23 | fin_uart: uart_dummy_fin { |
| 24 | compatible = "fixed-clock"; |
| 25 | clock-output-names = "fin_uart"; |
| 26 | clock-frequency = <132710400>; |
| 27 | u-boot,dm-pre-reloc; |
| 28 | #clock-cells = <0>; |
| 29 | }; |
| 30 | |
| 31 | uart2: serial@13820000 { |
| 32 | compatible = "samsung,exynos4210-uart"; |
| 33 | reg = <0x13820000 0x100>; |
| 34 | u-boot,dm-pre-reloc; |
| 35 | clocks = <&fin_uart>, <&fin_uart>; // driver uses 1st clock |
| 36 | clock-names = "uart", "clk_uart_baud0"; |
| 37 | pinctrl-names = "default"; |
| 38 | pinctrl-0 = <&uart2_bus>; |
| 39 | }; |
| 40 | |
| 41 | gpioi2c0: i2c-0 { |
| 42 | #address-cells = <1>; |
| 43 | #size-cells = <0>; |
| 44 | compatible = "i2c-gpio"; |
| 45 | status = "disabled"; |
| 46 | gpios = < |
| 47 | &gpc1 0 0 /* sda */ |
| 48 | &gpc1 1 0 /* scl */ |
| 49 | >; |
| 50 | i2c-gpio,delay-us = <5>; |
| 51 | |
| 52 | s2mu004@3d { |
| 53 | compatible = "samsung,s2mu004mfd"; |
| 54 | }; |
| 55 | }; |
| 56 | |
| 57 | /* ALIVE */ |
| 58 | pinctrl_0: pinctrl@139F0000 { |
| 59 | compatible = "samsung,exynos78x0-pinctrl"; |
| 60 | reg = <0x139F0000 0x1000>; |
| 61 | }; |
| 62 | |
| 63 | /* DISP/AUD */ |
| 64 | pinctrl_2: pinctrl@148C0000 { |
| 65 | compatible = "samsung,exynos78x0-pinctrl"; |
| 66 | reg = <0x148C0000 0x1000>; |
| 67 | }; |
| 68 | |
| 69 | /* FSYS0 */ |
| 70 | pinctrl_4: pinctrl@13750000 { |
| 71 | compatible = "samsung,exynos78x0-pinctrl"; |
| 72 | reg = <0x13750000 0x1000>; |
| 73 | }; |
| 74 | |
| 75 | /* ALIVE */ |
| 76 | gpio_0: gpio@139F0000 { |
| 77 | compatible = "samsung,exynos78x0-gpio"; |
| 78 | reg = <0x139F0000 0x1000>; |
| 79 | }; |
| 80 | |
| 81 | /* DISP/AUD */ |
| 82 | gpio_2: gpio@148C0000 { |
| 83 | compatible = "samsung,exynos78x0-gpio"; |
| 84 | reg = <0x148C0000 0x1000>; |
| 85 | }; |
| 86 | |
| 87 | /* FSYS0 */ |
| 88 | gpio_4: gpio@13750000 { |
| 89 | compatible = "samsung,exynos78x0-gpio"; |
| 90 | reg = <0x13750000 0x1000>; |
| 91 | }; |
| 92 | |
| 93 | /* TOP */ |
| 94 | gpio_6: gpio@139B0000 { |
| 95 | compatible = "samsung,exynos78x0-gpio"; |
| 96 | reg = <0x139B0000 0x1000>; |
| 97 | }; |
| 98 | }; |