blob: 016a21e9d0bdb62ae7df20e4a8c5a3756899b706 [file] [log] [blame]
Sudhakar Rajashekhara68921812010-06-10 15:18:15 +05301/*
2 * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
3 *
4 * Based on davinci_dvevm.h. Original Copyrights follow:
5 *
6 * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 */
22
23#ifndef __CONFIG_H
24#define __CONFIG_H
25
26/*
27 * Board
28 */
29
30/*
31 * SoC Configuration
32 */
33#define CONFIG_MACH_DAVINCI_DA850_EVM
34#define CONFIG_ARM926EJS /* arm926ejs CPU core */
35#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */
36#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID)
37#define CONFIG_SYS_OSCIN_FREQ 24000000
38#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE
39#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID)
40#define CONFIG_SYS_HZ 1000
41#define CONFIG_SKIP_LOWLEVEL_INIT
Sudhakar Rajashekhara68921812010-06-10 15:18:15 +053042
43/*
44 * Memory Info
45 */
46#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */
47#define CONFIG_SYS_GBL_DATA_SIZE 128 /* reserved for initial data */
48#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
49#define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */
50
51/* memtest start addr */
52#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000)
53
54/* memtest will be run on 16MB */
55#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024)
56
57#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
58#define CONFIG_STACKSIZE (256*1024) /* regular stack */
59
60/*
61 * Serial Driver info
62 */
63#define CONFIG_SYS_NS16550
64#define CONFIG_SYS_NS16550_SERIAL
65#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */
66#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */
67#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
68#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
69#define CONFIG_BAUDRATE 115200 /* Default baud rate */
70#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
71
72/*
73 * I2C Configuration
74 */
75#define CONFIG_HARD_I2C
76#define CONFIG_DRIVER_DAVINCI_I2C
77#define CONFIG_SYS_I2C_SPEED 25000
78#define CONFIG_SYS_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
79
80/*
81 * U-Boot general configuration
82 */
83#define CONFIG_BOOTFILE "uImage" /* Boot file name */
84#define CONFIG_SYS_PROMPT "DA850-evm > " /* Command Prompt */
85#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
86#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
87#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
88#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
89#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)
90#define CONFIG_VERSION_VARIABLE
91#define CONFIG_AUTO_COMPLETE
92#define CONFIG_SYS_HUSH_PARSER
93#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
94#define CONFIG_CMDLINE_EDITING
95#define CONFIG_SYS_LONGHELP
96#define CONFIG_CRC32_VERIFY
97#define CONFIG_MX_CYCLIC
98
99/*
100 * Linux Information
101 */
102#define LINUX_BOOT_PARAM_ADDR (CONFIG_SYS_MEMTEST_START + 0x100)
103#define CONFIG_CMDLINE_TAG
104#define CONFIG_SETUP_MEMORY_TAGS
105#define CONFIG_BOOTARGS \
106 "mem=32M console=ttyS2,115200n8 root=/dev/mtdblock2 rw noinitrd ip=dhcp"
107#define CONFIG_BOOTDELAY 3
108
109/*
110 * U-Boot commands
111 */
112#include <config_cmd_default.h>
113#define CONFIG_CMD_ENV
114#define CONFIG_CMD_ASKENV
115#define CONFIG_CMD_DHCP
116#define CONFIG_CMD_DIAG
117#define CONFIG_CMD_MII
118#define CONFIG_CMD_PING
119#define CONFIG_CMD_SAVES
120#define CONFIG_CMD_MEMORY
121
122#ifndef CONFIG_DRIVER_TI_EMAC
123#undef CONFIG_CMD_NET
124#undef CONFIG_CMD_DHCP
125#undef CONFIG_CMD_MII
126#undef CONFIG_CMD_PING
127#endif
128
129#if !defined(CONFIG_USE_NAND) && \
130 !defined(CONFIG_USE_NOR) && \
131 !defined(CONFIG_USE_SPIFLASH)
132#define CONFIG_ENV_IS_NOWHERE
133#define CONFIG_SYS_NO_FLASH
134#define CONFIG_ENV_SIZE (16 << 10)
135#undef CONFIG_CMD_IMLS
136#undef CONFIG_CMD_ENV
137#endif
138
Heiko Schocher0e2412a2010-09-17 13:10:42 +0200139/* additions for new relocation code, must added to all boards */
140#undef CONFIG_SYS_ARM_WITHOUT_RELOC /* This board is tested with relocation support */
141#define CONFIG_SYS_SDRAM_BASE 0xc0000000
142#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
143 CONFIG_SYS_GBL_DATA_SIZE)
Sudhakar Rajashekhara68921812010-06-10 15:18:15 +0530144#endif /* __CONFIG_H */