Tom Rini | 6bb92fc | 2024-05-20 09:54:58 -0600 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-only OR MIT |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 2 | /* |
| 3 | * Device Tree Source for J721S2 SoC Family MCU/WAKEUP Domain peripherals |
| 4 | * |
Tom Rini | 6bb92fc | 2024-05-20 09:54:58 -0600 | [diff] [blame] | 5 | * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/ |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 6 | */ |
| 7 | |
| 8 | &cbass_mcu_wakeup { |
| 9 | sms: system-controller@44083000 { |
| 10 | compatible = "ti,k2g-sci"; |
| 11 | ti,host-id = <12>; |
| 12 | |
| 13 | mbox-names = "rx", "tx"; |
| 14 | |
| 15 | mboxes = <&secure_proxy_main 11>, |
| 16 | <&secure_proxy_main 13>; |
| 17 | |
| 18 | reg-names = "debug_messages"; |
| 19 | reg = <0x00 0x44083000 0x00 0x1000>; |
| 20 | |
| 21 | k3_pds: power-controller { |
| 22 | compatible = "ti,sci-pm-domain"; |
| 23 | #power-domain-cells = <2>; |
| 24 | }; |
| 25 | |
| 26 | k3_clks: clock-controller { |
| 27 | compatible = "ti,k2g-sci-clk"; |
| 28 | #clock-cells = <2>; |
| 29 | }; |
| 30 | |
| 31 | k3_reset: reset-controller { |
| 32 | compatible = "ti,sci-reset"; |
| 33 | #reset-cells = <2>; |
| 34 | }; |
| 35 | }; |
| 36 | |
Tom Rini | 93743d2 | 2024-04-01 09:08:13 -0400 | [diff] [blame] | 37 | wkup_conf: bus@43000000 { |
| 38 | compatible = "simple-bus"; |
| 39 | #address-cells = <1>; |
| 40 | #size-cells = <1>; |
| 41 | ranges = <0x0 0x00 0x43000000 0x20000>; |
| 42 | |
| 43 | chipid: chipid@14 { |
| 44 | compatible = "ti,am654-chipid"; |
| 45 | reg = <0x14 0x4>; |
| 46 | }; |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 47 | }; |
| 48 | |
| 49 | secure_proxy_sa3: mailbox@43600000 { |
| 50 | compatible = "ti,am654-secure-proxy"; |
| 51 | #mbox-cells = <1>; |
| 52 | reg-names = "target_data", "rt", "scfg"; |
| 53 | reg = <0x00 0x43600000 0x00 0x10000>, |
| 54 | <0x00 0x44880000 0x00 0x20000>, |
| 55 | <0x00 0x44860000 0x00 0x20000>; |
| 56 | /* |
| 57 | * Marked Disabled: |
| 58 | * Node is incomplete as it is meant for bootloaders and |
| 59 | * firmware on non-MPU processors |
| 60 | */ |
| 61 | status = "disabled"; |
| 62 | }; |
| 63 | |
| 64 | mcu_ram: sram@41c00000 { |
| 65 | compatible = "mmio-sram"; |
| 66 | reg = <0x00 0x41c00000 0x00 0x100000>; |
| 67 | ranges = <0x00 0x00 0x41c00000 0x100000>; |
| 68 | #address-cells = <1>; |
| 69 | #size-cells = <1>; |
| 70 | }; |
| 71 | |
| 72 | wkup_pmx0: pinctrl@4301c000 { |
| 73 | compatible = "pinctrl-single"; |
| 74 | /* Proxy 0 addressing */ |
| 75 | reg = <0x00 0x4301c000 0x00 0x034>; |
| 76 | #pinctrl-cells = <1>; |
| 77 | pinctrl-single,register-width = <32>; |
| 78 | pinctrl-single,function-mask = <0xffffffff>; |
| 79 | }; |
| 80 | |
| 81 | wkup_pmx1: pinctrl@4301c038 { |
| 82 | compatible = "pinctrl-single"; |
| 83 | /* Proxy 0 addressing */ |
| 84 | reg = <0x00 0x4301c038 0x00 0x02C>; |
| 85 | #pinctrl-cells = <1>; |
| 86 | pinctrl-single,register-width = <32>; |
| 87 | pinctrl-single,function-mask = <0xffffffff>; |
| 88 | }; |
| 89 | |
| 90 | wkup_pmx2: pinctrl@4301c068 { |
| 91 | compatible = "pinctrl-single"; |
| 92 | /* Proxy 0 addressing */ |
| 93 | reg = <0x00 0x4301c068 0x00 0x120>; |
| 94 | #pinctrl-cells = <1>; |
| 95 | pinctrl-single,register-width = <32>; |
| 96 | pinctrl-single,function-mask = <0xffffffff>; |
| 97 | }; |
| 98 | |
| 99 | wkup_pmx3: pinctrl@4301c190 { |
| 100 | compatible = "pinctrl-single"; |
| 101 | /* Proxy 0 addressing */ |
| 102 | reg = <0x00 0x4301c190 0x00 0x004>; |
| 103 | #pinctrl-cells = <1>; |
| 104 | pinctrl-single,register-width = <32>; |
| 105 | pinctrl-single,function-mask = <0xffffffff>; |
| 106 | }; |
| 107 | |
| 108 | /* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */ |
| 109 | mcu_timerio_input: pinctrl@40f04200 { |
| 110 | compatible = "pinctrl-single"; |
| 111 | reg = <0x00 0x40f04200 0x00 0x28>; |
| 112 | #pinctrl-cells = <1>; |
| 113 | pinctrl-single,register-width = <32>; |
| 114 | pinctrl-single,function-mask = <0x0000000f>; |
| 115 | /* Non-MPU Firmware usage */ |
| 116 | status = "reserved"; |
| 117 | }; |
| 118 | |
| 119 | /* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */ |
| 120 | mcu_timerio_output: pinctrl@40f04280 { |
| 121 | compatible = "pinctrl-single"; |
| 122 | reg = <0x00 0x40f04280 0x00 0x28>; |
| 123 | #pinctrl-cells = <1>; |
| 124 | pinctrl-single,register-width = <32>; |
| 125 | pinctrl-single,function-mask = <0x0000000f>; |
| 126 | /* Non-MPU Firmware usage */ |
| 127 | status = "reserved"; |
| 128 | }; |
| 129 | |
| 130 | wkup_gpio_intr: interrupt-controller@42200000 { |
| 131 | compatible = "ti,sci-intr"; |
| 132 | reg = <0x00 0x42200000 0x00 0x400>; |
| 133 | ti,intr-trigger-type = <1>; |
| 134 | interrupt-controller; |
| 135 | interrupt-parent = <&gic500>; |
| 136 | #interrupt-cells = <1>; |
| 137 | ti,sci = <&sms>; |
| 138 | ti,sci-dev-id = <125>; |
| 139 | ti,interrupt-ranges = <16 960 16>; |
| 140 | }; |
| 141 | |
Tom Rini | 6b642ac | 2024-10-01 12:20:28 -0600 | [diff] [blame] | 142 | mcu_conf: bus@40f00000 { |
| 143 | compatible = "simple-bus"; |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 144 | #address-cells = <1>; |
| 145 | #size-cells = <1>; |
| 146 | ranges = <0x0 0x0 0x40f00000 0x20000>; |
| 147 | |
Tom Rini | 6b642ac | 2024-10-01 12:20:28 -0600 | [diff] [blame] | 148 | cpsw_mac_syscon: ethernet-mac-syscon@200 { |
| 149 | compatible = "ti,am62p-cpsw-mac-efuse", "syscon"; |
| 150 | reg = <0x200 0x8>; |
| 151 | }; |
| 152 | |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 153 | phy_gmii_sel: phy@4040 { |
| 154 | compatible = "ti,am654-phy-gmii-sel"; |
| 155 | reg = <0x4040 0x4>; |
| 156 | #phy-cells = <1>; |
| 157 | }; |
| 158 | |
| 159 | }; |
| 160 | |
| 161 | mcu_timer0: timer@40400000 { |
| 162 | compatible = "ti,am654-timer"; |
| 163 | reg = <0x00 0x40400000 0x00 0x400>; |
| 164 | interrupts = <GIC_SPI 816 IRQ_TYPE_LEVEL_HIGH>; |
| 165 | clocks = <&k3_clks 35 1>; |
| 166 | clock-names = "fck"; |
| 167 | assigned-clocks = <&k3_clks 35 1>; |
| 168 | assigned-clock-parents = <&k3_clks 35 2>; |
| 169 | power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>; |
| 170 | ti,timer-pwm; |
| 171 | /* Non-MPU Firmware usage */ |
| 172 | status = "reserved"; |
| 173 | }; |
| 174 | |
| 175 | mcu_timer1: timer@40410000 { |
| 176 | compatible = "ti,am654-timer"; |
| 177 | reg = <0x00 0x40410000 0x00 0x400>; |
| 178 | interrupts = <GIC_SPI 817 IRQ_TYPE_LEVEL_HIGH>; |
| 179 | clocks = <&k3_clks 83 1>; |
| 180 | clock-names = "fck"; |
| 181 | assigned-clocks = <&k3_clks 83 1>; |
| 182 | assigned-clock-parents = <&k3_clks 83 2>; |
| 183 | power-domains = <&k3_pds 83 TI_SCI_PD_EXCLUSIVE>; |
| 184 | ti,timer-pwm; |
| 185 | /* Non-MPU Firmware usage */ |
| 186 | status = "reserved"; |
| 187 | }; |
| 188 | |
| 189 | mcu_timer2: timer@40420000 { |
| 190 | compatible = "ti,am654-timer"; |
| 191 | reg = <0x00 0x40420000 0x00 0x400>; |
| 192 | interrupts = <GIC_SPI 818 IRQ_TYPE_LEVEL_HIGH>; |
| 193 | clocks = <&k3_clks 84 1>; |
| 194 | clock-names = "fck"; |
| 195 | assigned-clocks = <&k3_clks 84 1>; |
| 196 | assigned-clock-parents = <&k3_clks 84 2>; |
| 197 | power-domains = <&k3_pds 84 TI_SCI_PD_EXCLUSIVE>; |
| 198 | ti,timer-pwm; |
| 199 | /* Non-MPU Firmware usage */ |
| 200 | status = "reserved"; |
| 201 | }; |
| 202 | |
| 203 | mcu_timer3: timer@40430000 { |
| 204 | compatible = "ti,am654-timer"; |
| 205 | reg = <0x00 0x40430000 0x00 0x400>; |
| 206 | interrupts = <GIC_SPI 819 IRQ_TYPE_LEVEL_HIGH>; |
| 207 | clocks = <&k3_clks 85 1>; |
| 208 | clock-names = "fck"; |
| 209 | assigned-clocks = <&k3_clks 85 1>; |
| 210 | assigned-clock-parents = <&k3_clks 85 2>; |
| 211 | power-domains = <&k3_pds 85 TI_SCI_PD_EXCLUSIVE>; |
| 212 | ti,timer-pwm; |
| 213 | /* Non-MPU Firmware usage */ |
| 214 | status = "reserved"; |
| 215 | }; |
| 216 | |
| 217 | mcu_timer4: timer@40440000 { |
| 218 | compatible = "ti,am654-timer"; |
| 219 | reg = <0x00 0x40440000 0x00 0x400>; |
| 220 | interrupts = <GIC_SPI 820 IRQ_TYPE_LEVEL_HIGH>; |
| 221 | clocks = <&k3_clks 86 1>; |
| 222 | clock-names = "fck"; |
| 223 | assigned-clocks = <&k3_clks 86 1>; |
| 224 | assigned-clock-parents = <&k3_clks 86 2>; |
| 225 | power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>; |
| 226 | ti,timer-pwm; |
| 227 | /* Non-MPU Firmware usage */ |
| 228 | status = "reserved"; |
| 229 | }; |
| 230 | |
| 231 | mcu_timer5: timer@40450000 { |
| 232 | compatible = "ti,am654-timer"; |
| 233 | reg = <0x00 0x40450000 0x00 0x400>; |
| 234 | interrupts = <GIC_SPI 821 IRQ_TYPE_LEVEL_HIGH>; |
| 235 | clocks = <&k3_clks 87 1>; |
| 236 | clock-names = "fck"; |
| 237 | assigned-clocks = <&k3_clks 87 1>; |
| 238 | assigned-clock-parents = <&k3_clks 87 2>; |
| 239 | power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>; |
| 240 | ti,timer-pwm; |
| 241 | /* Non-MPU Firmware usage */ |
| 242 | status = "reserved"; |
| 243 | }; |
| 244 | |
| 245 | mcu_timer6: timer@40460000 { |
| 246 | compatible = "ti,am654-timer"; |
| 247 | reg = <0x00 0x40460000 0x00 0x400>; |
| 248 | interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>; |
| 249 | clocks = <&k3_clks 88 1>; |
| 250 | clock-names = "fck"; |
| 251 | assigned-clocks = <&k3_clks 88 1>; |
| 252 | assigned-clock-parents = <&k3_clks 88 2>; |
| 253 | power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>; |
| 254 | ti,timer-pwm; |
| 255 | /* Non-MPU Firmware usage */ |
| 256 | status = "reserved"; |
| 257 | }; |
| 258 | |
| 259 | mcu_timer7: timer@40470000 { |
| 260 | compatible = "ti,am654-timer"; |
| 261 | reg = <0x00 0x40470000 0x00 0x400>; |
| 262 | interrupts = <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>; |
| 263 | clocks = <&k3_clks 89 1>; |
| 264 | clock-names = "fck"; |
| 265 | assigned-clocks = <&k3_clks 89 1>; |
| 266 | assigned-clock-parents = <&k3_clks 89 2>; |
| 267 | power-domains = <&k3_pds 89 TI_SCI_PD_EXCLUSIVE>; |
| 268 | ti,timer-pwm; |
| 269 | /* Non-MPU Firmware usage */ |
| 270 | status = "reserved"; |
| 271 | }; |
| 272 | |
| 273 | mcu_timer8: timer@40480000 { |
| 274 | compatible = "ti,am654-timer"; |
| 275 | reg = <0x00 0x40480000 0x00 0x400>; |
| 276 | interrupts = <GIC_SPI 824 IRQ_TYPE_LEVEL_HIGH>; |
| 277 | clocks = <&k3_clks 90 1>; |
| 278 | clock-names = "fck"; |
| 279 | assigned-clocks = <&k3_clks 90 1>; |
| 280 | assigned-clock-parents = <&k3_clks 90 2>; |
| 281 | power-domains = <&k3_pds 90 TI_SCI_PD_EXCLUSIVE>; |
| 282 | ti,timer-pwm; |
| 283 | /* Non-MPU Firmware usage */ |
| 284 | status = "reserved"; |
| 285 | }; |
| 286 | |
| 287 | mcu_timer9: timer@40490000 { |
| 288 | compatible = "ti,am654-timer"; |
| 289 | reg = <0x00 0x40490000 0x00 0x400>; |
| 290 | interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH>; |
| 291 | clocks = <&k3_clks 91 1>; |
| 292 | clock-names = "fck"; |
| 293 | assigned-clocks = <&k3_clks 91 1>; |
| 294 | assigned-clock-parents = <&k3_clks 91 2>; |
| 295 | power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>; |
| 296 | ti,timer-pwm; |
| 297 | /* Non-MPU Firmware usage */ |
| 298 | status = "reserved"; |
| 299 | }; |
| 300 | |
| 301 | wkup_uart0: serial@42300000 { |
| 302 | compatible = "ti,j721e-uart", "ti,am654-uart"; |
| 303 | reg = <0x00 0x42300000 0x00 0x200>; |
| 304 | interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>; |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 305 | clocks = <&k3_clks 359 3>; |
| 306 | clock-names = "fclk"; |
| 307 | power-domains = <&k3_pds 359 TI_SCI_PD_EXCLUSIVE>; |
| 308 | status = "disabled"; |
| 309 | }; |
| 310 | |
| 311 | mcu_uart0: serial@40a00000 { |
| 312 | compatible = "ti,j721e-uart", "ti,am654-uart"; |
| 313 | reg = <0x00 0x40a00000 0x00 0x200>; |
| 314 | interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>; |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 315 | clocks = <&k3_clks 149 3>; |
| 316 | clock-names = "fclk"; |
| 317 | power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>; |
| 318 | status = "disabled"; |
| 319 | }; |
| 320 | |
| 321 | wkup_gpio0: gpio@42110000 { |
| 322 | compatible = "ti,j721e-gpio", "ti,keystone-gpio"; |
| 323 | reg = <0x00 0x42110000 0x00 0x100>; |
| 324 | gpio-controller; |
| 325 | #gpio-cells = <2>; |
| 326 | interrupt-parent = <&wkup_gpio_intr>; |
| 327 | interrupts = <103>, <104>, <105>, <106>, <107>, <108>; |
| 328 | interrupt-controller; |
| 329 | #interrupt-cells = <2>; |
| 330 | ti,ngpio = <89>; |
| 331 | ti,davinci-gpio-unbanked = <0>; |
| 332 | power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>; |
| 333 | clocks = <&k3_clks 115 0>; |
| 334 | clock-names = "gpio"; |
| 335 | status = "disabled"; |
| 336 | }; |
| 337 | |
| 338 | wkup_gpio1: gpio@42100000 { |
| 339 | compatible = "ti,j721e-gpio", "ti,keystone-gpio"; |
| 340 | reg = <0x00 0x42100000 0x00 0x100>; |
| 341 | gpio-controller; |
| 342 | #gpio-cells = <2>; |
| 343 | interrupt-parent = <&wkup_gpio_intr>; |
| 344 | interrupts = <112>, <113>, <114>, <115>, <116>, <117>; |
| 345 | interrupt-controller; |
| 346 | #interrupt-cells = <2>; |
| 347 | ti,ngpio = <89>; |
| 348 | ti,davinci-gpio-unbanked = <0>; |
| 349 | power-domains = <&k3_pds 116 TI_SCI_PD_EXCLUSIVE>; |
| 350 | clocks = <&k3_clks 116 0>; |
| 351 | clock-names = "gpio"; |
| 352 | status = "disabled"; |
| 353 | }; |
| 354 | |
| 355 | wkup_i2c0: i2c@42120000 { |
| 356 | compatible = "ti,j721e-i2c", "ti,omap4-i2c"; |
| 357 | reg = <0x00 0x42120000 0x00 0x100>; |
| 358 | interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>; |
| 359 | #address-cells = <1>; |
| 360 | #size-cells = <0>; |
| 361 | clocks = <&k3_clks 223 1>; |
| 362 | clock-names = "fck"; |
| 363 | power-domains = <&k3_pds 223 TI_SCI_PD_EXCLUSIVE>; |
| 364 | status = "disabled"; |
| 365 | }; |
| 366 | |
| 367 | mcu_i2c0: i2c@40b00000 { |
| 368 | compatible = "ti,j721e-i2c", "ti,omap4-i2c"; |
| 369 | reg = <0x00 0x40b00000 0x00 0x100>; |
| 370 | interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>; |
| 371 | #address-cells = <1>; |
| 372 | #size-cells = <0>; |
| 373 | clocks = <&k3_clks 221 1>; |
| 374 | clock-names = "fck"; |
| 375 | power-domains = <&k3_pds 221 TI_SCI_PD_EXCLUSIVE>; |
| 376 | status = "disabled"; |
| 377 | }; |
| 378 | |
| 379 | mcu_i2c1: i2c@40b10000 { |
| 380 | compatible = "ti,j721e-i2c", "ti,omap4-i2c"; |
| 381 | reg = <0x00 0x40b10000 0x00 0x100>; |
| 382 | interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>; |
| 383 | #address-cells = <1>; |
| 384 | #size-cells = <0>; |
| 385 | clocks = <&k3_clks 222 1>; |
| 386 | clock-names = "fck"; |
| 387 | power-domains = <&k3_pds 222 TI_SCI_PD_EXCLUSIVE>; |
| 388 | status = "disabled"; |
| 389 | }; |
| 390 | |
| 391 | mcu_mcan0: can@40528000 { |
| 392 | compatible = "bosch,m_can"; |
| 393 | reg = <0x00 0x40528000 0x00 0x200>, |
| 394 | <0x00 0x40500000 0x00 0x8000>; |
| 395 | reg-names = "m_can", "message_ram"; |
| 396 | power-domains = <&k3_pds 207 TI_SCI_PD_EXCLUSIVE>; |
| 397 | clocks = <&k3_clks 207 0>, <&k3_clks 207 1>; |
| 398 | clock-names = "hclk", "cclk"; |
| 399 | interrupts = <GIC_SPI 832 IRQ_TYPE_LEVEL_HIGH>, |
| 400 | <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>; |
| 401 | interrupt-names = "int0", "int1"; |
| 402 | bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; |
| 403 | status = "disabled"; |
| 404 | }; |
| 405 | |
| 406 | mcu_mcan1: can@40568000 { |
| 407 | compatible = "bosch,m_can"; |
| 408 | reg = <0x00 0x40568000 0x00 0x200>, |
| 409 | <0x00 0x40540000 0x00 0x8000>; |
| 410 | reg-names = "m_can", "message_ram"; |
| 411 | power-domains = <&k3_pds 208 TI_SCI_PD_EXCLUSIVE>; |
| 412 | clocks = <&k3_clks 208 0>, <&k3_clks 208 1>; |
| 413 | clock-names = "hclk", "cclk"; |
| 414 | interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>, |
| 415 | <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>; |
| 416 | interrupt-names = "int0", "int1"; |
| 417 | bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; |
| 418 | status = "disabled"; |
| 419 | }; |
| 420 | |
| 421 | mcu_spi0: spi@40300000 { |
| 422 | compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; |
| 423 | reg = <0x00 0x040300000 0x00 0x400>; |
| 424 | interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>; |
| 425 | #address-cells = <1>; |
| 426 | #size-cells = <0>; |
| 427 | power-domains = <&k3_pds 347 TI_SCI_PD_EXCLUSIVE>; |
| 428 | clocks = <&k3_clks 347 0>; |
| 429 | status = "disabled"; |
| 430 | }; |
| 431 | |
| 432 | mcu_spi1: spi@40310000 { |
| 433 | compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; |
| 434 | reg = <0x00 0x040310000 0x00 0x400>; |
| 435 | interrupts = <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>; |
| 436 | #address-cells = <1>; |
| 437 | #size-cells = <0>; |
| 438 | power-domains = <&k3_pds 348 TI_SCI_PD_EXCLUSIVE>; |
| 439 | clocks = <&k3_clks 348 0>; |
| 440 | status = "disabled"; |
| 441 | }; |
| 442 | |
| 443 | mcu_spi2: spi@40320000 { |
| 444 | compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; |
| 445 | reg = <0x00 0x040320000 0x00 0x400>; |
| 446 | interrupts = <GIC_SPI 850 IRQ_TYPE_LEVEL_HIGH>; |
| 447 | #address-cells = <1>; |
| 448 | #size-cells = <0>; |
| 449 | power-domains = <&k3_pds 349 TI_SCI_PD_EXCLUSIVE>; |
| 450 | clocks = <&k3_clks 349 0>; |
| 451 | status = "disabled"; |
| 452 | }; |
| 453 | |
| 454 | mcu_navss: bus@28380000 { |
| 455 | compatible = "simple-bus"; |
| 456 | #address-cells = <2>; |
| 457 | #size-cells = <2>; |
| 458 | ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>; |
| 459 | dma-coherent; |
| 460 | dma-ranges; |
| 461 | |
| 462 | ti,sci-dev-id = <267>; |
| 463 | |
| 464 | mcu_ringacc: ringacc@2b800000 { |
| 465 | compatible = "ti,am654-navss-ringacc"; |
| 466 | reg = <0x0 0x2b800000 0x0 0x400000>, |
| 467 | <0x0 0x2b000000 0x0 0x400000>, |
| 468 | <0x0 0x28590000 0x0 0x100>, |
| 469 | <0x0 0x2a500000 0x0 0x40000>, |
| 470 | <0x0 0x28440000 0x0 0x40000>; |
| 471 | reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg"; |
| 472 | ti,num-rings = <286>; |
| 473 | ti,sci-rm-range-gp-rings = <0x1>; |
| 474 | ti,sci = <&sms>; |
| 475 | ti,sci-dev-id = <272>; |
| 476 | msi-parent = <&main_udmass_inta>; |
| 477 | }; |
| 478 | |
| 479 | mcu_udmap: dma-controller@285c0000 { |
| 480 | compatible = "ti,j721e-navss-mcu-udmap"; |
| 481 | reg = <0x0 0x285c0000 0x0 0x100>, |
| 482 | <0x0 0x2a800000 0x0 0x40000>, |
Tom Rini | 93743d2 | 2024-04-01 09:08:13 -0400 | [diff] [blame] | 483 | <0x0 0x2aa00000 0x0 0x40000>, |
| 484 | <0x0 0x284a0000 0x0 0x4000>, |
| 485 | <0x0 0x284c0000 0x0 0x4000>, |
| 486 | <0x0 0x28400000 0x0 0x2000>; |
| 487 | reg-names = "gcfg", "rchanrt", "tchanrt", |
| 488 | "tchan", "rchan", "rflow"; |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 489 | msi-parent = <&main_udmass_inta>; |
| 490 | #dma-cells = <1>; |
| 491 | |
| 492 | ti,sci = <&sms>; |
| 493 | ti,sci-dev-id = <273>; |
| 494 | ti,ringacc = <&mcu_ringacc>; |
| 495 | ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */ |
| 496 | <0x0f>; /* TX_HCHAN */ |
| 497 | ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */ |
| 498 | <0x0b>; /* RX_HCHAN */ |
| 499 | ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */ |
| 500 | }; |
| 501 | }; |
| 502 | |
| 503 | secure_proxy_mcu: mailbox@2a480000 { |
| 504 | compatible = "ti,am654-secure-proxy"; |
| 505 | #mbox-cells = <1>; |
| 506 | reg-names = "target_data", "rt", "scfg"; |
| 507 | reg = <0x00 0x2a480000 0x00 0x80000>, |
| 508 | <0x00 0x2a380000 0x00 0x80000>, |
| 509 | <0x00 0x2a400000 0x00 0x80000>; |
| 510 | /* |
| 511 | * Marked Disabled: |
| 512 | * Node is incomplete as it is meant for bootloaders and |
| 513 | * firmware on non-MPU processors |
| 514 | */ |
| 515 | status = "disabled"; |
| 516 | }; |
| 517 | |
| 518 | mcu_cpsw: ethernet@46000000 { |
| 519 | compatible = "ti,j721e-cpsw-nuss"; |
| 520 | #address-cells = <2>; |
| 521 | #size-cells = <2>; |
| 522 | reg = <0x0 0x46000000 0x0 0x200000>; |
| 523 | reg-names = "cpsw_nuss"; |
| 524 | ranges = <0x0 0x0 0x0 0x46000000 0x0 0x200000>; |
| 525 | dma-coherent; |
| 526 | clocks = <&k3_clks 29 28>; |
| 527 | clock-names = "fck"; |
| 528 | power-domains = <&k3_pds 29 TI_SCI_PD_EXCLUSIVE>; |
| 529 | |
| 530 | dmas = <&mcu_udmap 0xf000>, |
| 531 | <&mcu_udmap 0xf001>, |
| 532 | <&mcu_udmap 0xf002>, |
| 533 | <&mcu_udmap 0xf003>, |
| 534 | <&mcu_udmap 0xf004>, |
| 535 | <&mcu_udmap 0xf005>, |
| 536 | <&mcu_udmap 0xf006>, |
| 537 | <&mcu_udmap 0xf007>, |
| 538 | <&mcu_udmap 0x7000>; |
| 539 | dma-names = "tx0", "tx1", "tx2", "tx3", |
| 540 | "tx4", "tx5", "tx6", "tx7", |
| 541 | "rx"; |
| 542 | |
| 543 | ethernet-ports { |
| 544 | #address-cells = <1>; |
| 545 | #size-cells = <0>; |
| 546 | |
| 547 | cpsw_port1: port@1 { |
| 548 | reg = <1>; |
| 549 | ti,mac-only; |
| 550 | label = "port1"; |
Tom Rini | 6b642ac | 2024-10-01 12:20:28 -0600 | [diff] [blame] | 551 | ti,syscon-efuse = <&cpsw_mac_syscon 0x0>; |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 552 | phys = <&phy_gmii_sel 1>; |
| 553 | }; |
| 554 | }; |
| 555 | |
| 556 | davinci_mdio: mdio@f00 { |
| 557 | compatible = "ti,cpsw-mdio","ti,davinci_mdio"; |
| 558 | reg = <0x0 0xf00 0x0 0x100>; |
| 559 | #address-cells = <1>; |
| 560 | #size-cells = <0>; |
| 561 | clocks = <&k3_clks 29 28>; |
| 562 | clock-names = "fck"; |
| 563 | bus_freq = <1000000>; |
| 564 | }; |
| 565 | |
| 566 | cpts@3d000 { |
| 567 | compatible = "ti,am65-cpts"; |
| 568 | reg = <0x0 0x3d000 0x0 0x400>; |
| 569 | clocks = <&k3_clks 29 3>; |
| 570 | clock-names = "cpts"; |
| 571 | assigned-clocks = <&k3_clks 29 3>; /* CPTS_RFT_CLK */ |
| 572 | assigned-clock-parents = <&k3_clks 29 5>; /* MAIN_0_HSDIVOUT6_CLK */ |
| 573 | interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>; |
| 574 | interrupt-names = "cpts"; |
| 575 | ti,cpts-ext-ts-inputs = <4>; |
| 576 | ti,cpts-periodic-outputs = <2>; |
| 577 | }; |
| 578 | }; |
| 579 | |
| 580 | tscadc0: tscadc@40200000 { |
| 581 | compatible = "ti,am3359-tscadc"; |
| 582 | reg = <0x00 0x40200000 0x00 0x1000>; |
| 583 | interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>; |
| 584 | power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>; |
| 585 | clocks = <&k3_clks 0 0>; |
| 586 | assigned-clocks = <&k3_clks 0 2>; |
| 587 | assigned-clock-rates = <60000000>; |
| 588 | clock-names = "fck"; |
| 589 | dmas = <&main_udmap 0x7400>, |
| 590 | <&main_udmap 0x7401>; |
| 591 | dma-names = "fifo0", "fifo1"; |
| 592 | status = "disabled"; |
| 593 | |
| 594 | adc { |
| 595 | #io-channel-cells = <1>; |
| 596 | compatible = "ti,am3359-adc"; |
| 597 | }; |
| 598 | }; |
| 599 | |
| 600 | tscadc1: tscadc@40210000 { |
| 601 | compatible = "ti,am3359-tscadc"; |
| 602 | reg = <0x00 0x40210000 0x00 0x1000>; |
| 603 | interrupts = <GIC_SPI 861 IRQ_TYPE_LEVEL_HIGH>; |
| 604 | power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>; |
| 605 | clocks = <&k3_clks 1 0>; |
| 606 | assigned-clocks = <&k3_clks 1 2>; |
| 607 | assigned-clock-rates = <60000000>; |
| 608 | clock-names = "fck"; |
| 609 | dmas = <&main_udmap 0x7402>, |
| 610 | <&main_udmap 0x7403>; |
| 611 | dma-names = "fifo0", "fifo1"; |
| 612 | status = "disabled"; |
| 613 | |
| 614 | adc { |
| 615 | #io-channel-cells = <1>; |
| 616 | compatible = "ti,am3359-adc"; |
| 617 | }; |
| 618 | }; |
| 619 | |
| 620 | fss: bus@47000000 { |
| 621 | compatible = "simple-bus"; |
| 622 | #address-cells = <2>; |
| 623 | #size-cells = <2>; |
| 624 | ranges = <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, |
| 625 | <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, |
| 626 | <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; |
| 627 | |
| 628 | ospi0: spi@47040000 { |
| 629 | compatible = "ti,am654-ospi", "cdns,qspi-nor"; |
| 630 | reg = <0x00 0x47040000 0x00 0x100>, |
| 631 | <0x05 0x00000000 0x01 0x00000000>; |
| 632 | interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>; |
| 633 | cdns,fifo-depth = <256>; |
| 634 | cdns,fifo-width = <4>; |
| 635 | cdns,trigger-address = <0x0>; |
| 636 | clocks = <&k3_clks 109 5>; |
| 637 | assigned-clocks = <&k3_clks 109 5>; |
| 638 | assigned-clock-parents = <&k3_clks 109 7>; |
| 639 | assigned-clock-rates = <166666666>; |
| 640 | power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>; |
| 641 | #address-cells = <1>; |
| 642 | #size-cells = <0>; |
| 643 | |
| 644 | status = "disabled"; /* Needs pinmux */ |
| 645 | }; |
| 646 | |
| 647 | ospi1: spi@47050000 { |
| 648 | compatible = "ti,am654-ospi", "cdns,qspi-nor"; |
| 649 | reg = <0x00 0x47050000 0x00 0x100>, |
| 650 | <0x07 0x00000000 0x01 0x00000000>; |
| 651 | interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>; |
| 652 | cdns,fifo-depth = <256>; |
| 653 | cdns,fifo-width = <4>; |
| 654 | cdns,trigger-address = <0x0>; |
| 655 | clocks = <&k3_clks 110 5>; |
| 656 | power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>; |
| 657 | #address-cells = <1>; |
| 658 | #size-cells = <0>; |
| 659 | |
| 660 | status = "disabled"; /* Needs pinmux */ |
| 661 | }; |
| 662 | }; |
| 663 | |
| 664 | wkup_vtm0: temperature-sensor@42040000 { |
| 665 | compatible = "ti,j7200-vtm"; |
| 666 | reg = <0x00 0x42040000 0x0 0x350>, |
| 667 | <0x00 0x42050000 0x0 0x350>; |
Tom Rini | 6bb92fc | 2024-05-20 09:54:58 -0600 | [diff] [blame] | 668 | power-domains = <&k3_pds 180 TI_SCI_PD_SHARED>; |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 669 | #thermal-sensor-cells = <1>; |
| 670 | }; |
| 671 | |
| 672 | mcu_r5fss0: r5fss@41000000 { |
| 673 | compatible = "ti,j721s2-r5fss"; |
| 674 | ti,cluster-mode = <1>; |
| 675 | #address-cells = <1>; |
| 676 | #size-cells = <1>; |
| 677 | ranges = <0x41000000 0x00 0x41000000 0x20000>, |
| 678 | <0x41400000 0x00 0x41400000 0x20000>; |
| 679 | power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>; |
| 680 | |
| 681 | mcu_r5fss0_core0: r5f@41000000 { |
| 682 | compatible = "ti,j721s2-r5f"; |
| 683 | reg = <0x41000000 0x00010000>, |
| 684 | <0x41010000 0x00010000>; |
| 685 | reg-names = "atcm", "btcm"; |
| 686 | ti,sci = <&sms>; |
| 687 | ti,sci-dev-id = <284>; |
| 688 | ti,sci-proc-ids = <0x01 0xff>; |
| 689 | resets = <&k3_reset 284 1>; |
| 690 | firmware-name = "j721s2-mcu-r5f0_0-fw"; |
| 691 | ti,atcm-enable = <1>; |
| 692 | ti,btcm-enable = <1>; |
| 693 | ti,loczrama = <1>; |
| 694 | }; |
| 695 | |
| 696 | mcu_r5fss0_core1: r5f@41400000 { |
| 697 | compatible = "ti,j721s2-r5f"; |
| 698 | reg = <0x41400000 0x00010000>, |
| 699 | <0x41410000 0x00010000>; |
| 700 | reg-names = "atcm", "btcm"; |
| 701 | ti,sci = <&sms>; |
| 702 | ti,sci-dev-id = <285>; |
| 703 | ti,sci-proc-ids = <0x02 0xff>; |
| 704 | resets = <&k3_reset 285 1>; |
| 705 | firmware-name = "j721s2-mcu-r5f0_1-fw"; |
| 706 | ti,atcm-enable = <1>; |
| 707 | ti,btcm-enable = <1>; |
| 708 | ti,loczrama = <1>; |
| 709 | }; |
| 710 | }; |
| 711 | |
| 712 | mcu_esm: esm@40800000 { |
| 713 | compatible = "ti,j721e-esm"; |
| 714 | reg = <0x00 0x40800000 0x00 0x1000>; |
| 715 | ti,esm-pins = <95>; |
| 716 | bootph-pre-ram; |
| 717 | }; |
| 718 | |
| 719 | wkup_esm: esm@42080000 { |
| 720 | compatible = "ti,j721e-esm"; |
| 721 | reg = <0x00 0x42080000 0x00 0x1000>; |
| 722 | ti,esm-pins = <63>; |
| 723 | bootph-pre-ram; |
| 724 | }; |
| 725 | |
| 726 | /* |
| 727 | * The 2 RTI instances are couple with MCU R5Fs so keeping them |
| 728 | * reserved as these will be used by their respective firmware |
| 729 | */ |
| 730 | mcu_watchdog0: watchdog@40600000 { |
| 731 | compatible = "ti,j7-rti-wdt"; |
| 732 | reg = <0x00 0x40600000 0x00 0x100>; |
| 733 | clocks = <&k3_clks 295 1>; |
| 734 | power-domains = <&k3_pds 295 TI_SCI_PD_EXCLUSIVE>; |
| 735 | assigned-clocks = <&k3_clks 295 1>; |
| 736 | assigned-clock-parents = <&k3_clks 295 5>; |
| 737 | /* reserved for MCU_R5F0_0 */ |
| 738 | status = "reserved"; |
| 739 | }; |
| 740 | |
| 741 | mcu_watchdog1: watchdog@40610000 { |
| 742 | compatible = "ti,j7-rti-wdt"; |
| 743 | reg = <0x00 0x40610000 0x00 0x100>; |
| 744 | clocks = <&k3_clks 296 1>; |
| 745 | power-domains = <&k3_pds 296 TI_SCI_PD_EXCLUSIVE>; |
| 746 | assigned-clocks = <&k3_clks 296 1>; |
| 747 | assigned-clock-parents = <&k3_clks 296 5>; |
| 748 | /* reserved for MCU_R5F0_1 */ |
| 749 | status = "reserved"; |
| 750 | }; |
| 751 | }; |