| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /dts-v1/; |
| 3 | |
| 4 | #include "tegra30-cardhu.dtsi" |
| 5 | |
| 6 | /* This dts file support the cardhu A02 version of board */ |
| 7 | |
| 8 | / { |
| 9 | model = "NVIDIA Tegra30 Cardhu A02 evaluation board"; |
| 10 | compatible = "nvidia,cardhu-a02", "nvidia,cardhu", "nvidia,tegra30"; |
| 11 | |
| 12 | mmc@78000400 { |
| 13 | status = "okay"; |
| 14 | power-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>; |
| 15 | bus-width = <4>; |
| 16 | keep-power-in-suspend; |
| 17 | }; |
| 18 | |
| 19 | ddr_reg: regulator-ddr { |
| 20 | compatible = "regulator-fixed"; |
| 21 | regulator-name = "vdd_ddr"; |
| 22 | regulator-min-microvolt = <1500000>; |
| 23 | regulator-max-microvolt = <1500000>; |
| 24 | regulator-always-on; |
| 25 | regulator-boot-on; |
| 26 | enable-active-high; |
| 27 | gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; |
| 28 | }; |
| 29 | |
| 30 | sys_3v3_reg: regulator-3v3 { |
| 31 | compatible = "regulator-fixed"; |
| 32 | regulator-name = "sys_3v3"; |
| 33 | regulator-min-microvolt = <3300000>; |
| 34 | regulator-max-microvolt = <3300000>; |
| 35 | regulator-always-on; |
| 36 | regulator-boot-on; |
| 37 | enable-active-high; |
| 38 | gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; |
| 39 | }; |
| 40 | |
| 41 | usb1_vbus_reg: regulator-usb1 { |
| 42 | compatible = "regulator-fixed"; |
| 43 | regulator-name = "usb1_vbus"; |
| 44 | regulator-min-microvolt = <5000000>; |
| 45 | regulator-max-microvolt = <5000000>; |
| 46 | enable-active-high; |
| 47 | gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>; |
| 48 | gpio-open-drain; |
| 49 | vin-supply = <&vdd_5v0_reg>; |
| 50 | }; |
| 51 | |
| 52 | usb3_vbus_reg: regulator-usb3 { |
| 53 | compatible = "regulator-fixed"; |
| 54 | regulator-name = "usb3_vbus"; |
| 55 | regulator-min-microvolt = <5000000>; |
| 56 | regulator-max-microvolt = <5000000>; |
| 57 | enable-active-high; |
| 58 | gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>; |
| 59 | gpio-open-drain; |
| 60 | vin-supply = <&vdd_5v0_reg>; |
| 61 | }; |
| 62 | |
| 63 | vdd_5v0_reg: regulator-5v0 { |
| 64 | compatible = "regulator-fixed"; |
| 65 | regulator-name = "5v0"; |
| 66 | regulator-min-microvolt = <5000000>; |
| 67 | regulator-max-microvolt = <5000000>; |
| 68 | enable-active-high; |
| 69 | gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; |
| 70 | }; |
| 71 | |
| 72 | vdd_bl_reg: regulator-bl { |
| 73 | compatible = "regulator-fixed"; |
| 74 | regulator-name = "vdd_bl"; |
| 75 | regulator-min-microvolt = <5000000>; |
| 76 | regulator-max-microvolt = <5000000>; |
| 77 | regulator-always-on; |
| 78 | regulator-boot-on; |
| 79 | enable-active-high; |
| 80 | gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_HIGH>; |
| 81 | }; |
| 82 | }; |
| 83 | |