dts/upstream/Bindings/soc/dove/pmu.txt

Device Tree bindings for Marvell PMU

Required properties:
 - compatible: value should be "marvell,dove-pmu".
    May also include "simple-bus" if there are child devices, in which
    case the ranges node is required.
 - reg: two base addresses and sizes of the PM controller and PMU.
 - interrupts: single interrupt number for the PMU interrupt
 - interrupt-controller: must be specified as the PMU itself is an
    interrupt controller.
 - #interrupt-cells: must be 1.
 - #reset-cells: must be 1.
 - domains: sub-node containing domain descriptions

Optional properties:
 - ranges: defines the address mapping for child devices, as per the
   standard property of this name.  Required when compatible includes
   "simple-bus".

Power domain descriptions are listed as child nodes of the "domains"
sub-node.  Each domain has the following properties:

Required properties:
 - #power-domain-cells: must be 0.

Optional properties:
 - marvell,pmu_pwr_mask: specifies the mask value for PMU power register
 - marvell,pmu_iso_mask: specifies the mask value for PMU isolation register
 - resets: points to the reset manager (PMU node) and reset index.

Example:

	pmu: power-management@d0000 {
		compatible = "marvell,dove-pmu";
		reg = <0xd0000 0x8000>, <0xd8000 0x8000>;
		interrupts = <33>;
		interrupt-controller;
		#interrupt-cells = <1>;
		#reset-cells = <1>;

		domains {
			vpu_domain: vpu-domain {
				#power-domain-cells = <0>;
				marvell,pmu_pwr_mask = <0x00000008>;
				marvell,pmu_iso_mask = <0x00000001>;
				resets = <&pmu 16>;
			};

			gpu_domain: gpu-domain {
				#power-domain-cells = <0>;
				marvell,pmu_pwr_mask = <0x00000004>;
				marvell,pmu_iso_mask = <0x00000002>;
				resets = <&pmu 18>;
			};
		};
	};