| Nicolas Ferre | 09e1090 | 2008-12-06 13:11:14 +0100 | [diff] [blame^] | 1 | Atmel AT91 Evaluation kits |
| 2 | |
| 3 | http://atmel.com/dyn/products/tools.asp?family_id=605#1443 |
| 4 | |
| 5 | ------------------------------------------------------------------------------ |
| 6 | AT91SAM9260EK |
| 7 | ------------------------------------------------------------------------------ |
| 8 | |
| 9 | Memory map |
| 10 | 0x20000000 - 23FFFFFF SDRAM (64 MB) |
| 11 | 0xC0000000 - Cxxxxxxx Atmel Dataflash card (J13) |
| 12 | 0xD0000000 - Dxxxxxxx Soldered Atmel Dataflash |
| 13 | |
| 14 | Environment variables |
| 15 | |
| 16 | U-Boot environment variables can be stored at different places: |
| 17 | - Dataflash on SPI chip select 1 (default) |
| 18 | - Dataflash on SPI chip select 0 (dataflash card) |
| 19 | - Nand flash. |
| 20 | |
| 21 | You can choose your storage location at config step (here for at91sam9260ek) : |
| 22 | make at91sam9260ek_config - use data flash (spi cs1) (default) |
| 23 | make at91sam9260ek_nandflash_config - use nand flash |
| 24 | make at91sam9260ek_dataflash_cs0_config - use data flash (spi cs0) |
| 25 | make at91sam9260ek_dataflash_cs1_config - use data flash (spi cs1) |
| 26 | |
| 27 | |
| 28 | ------------------------------------------------------------------------------ |
| 29 | AT91SAM9261EK |
| 30 | ------------------------------------------------------------------------------ |
| 31 | |
| 32 | Memory map |
| 33 | 0x20000000 - 23FFFFFF SDRAM (64 MB) |
| 34 | 0xC0000000 - Cxxxxxxx Soldered Atmel Dataflash |
| 35 | 0xD0000000 - Dxxxxxxx Atmel Dataflash card (J22) |
| 36 | |
| 37 | Environment variables |
| 38 | |
| 39 | U-Boot environment variables can be stored at different places: |
| 40 | - Dataflash on SPI chip select 0 (default) |
| 41 | - Dataflash on SPI chip select 3 (dataflash card) |
| 42 | - Nand flash. |
| 43 | |
| 44 | You can choose your storage location at config step (here for at91sam9260ek) : |
| 45 | make at91sam9261ek_config - use data flash (spi cs0) (default) |
| 46 | make at91sam9261ek_nandflash_config - use nand flash |
| 47 | make at91sam9261ek_dataflash_cs0_config - use data flash (spi cs0) |
| 48 | make at91sam9261ek_dataflash_cs3_config - use data flash (spi cs3) |
| 49 | |
| 50 | |
| 51 | ------------------------------------------------------------------------------ |
| 52 | AT91SAM9263EK |
| 53 | ------------------------------------------------------------------------------ |
| 54 | |
| 55 | Memory map |
| 56 | 0x20000000 - 23FFFFFF SDRAM (64 MB) |
| 57 | 0xC0000000 - Cxxxxxxx Atmel Dataflash card (J9) |
| 58 | |
| 59 | Environment variables |
| 60 | |
| 61 | U-Boot environment variables can be stored at different places: |
| 62 | - Dataflash on SPI chip select 0 (dataflash card) |
| 63 | - Nand flash. |
| 64 | |
| 65 | You can choose your storage location at config step (here for at91sam9260ek) : |
| 66 | make at91sam9263ek_config - use data flash (spi cs0) (default) |
| 67 | make at91sam9263ek_nandflash_config - use nand flash |
| 68 | make at91sam9263ek_dataflash_cs0_config - use data flash (spi cs0) |
| 69 | |
| 70 | |
| 71 | ------------------------------------------------------------------------------ |
| 72 | AT91SAM9RLEK |
| 73 | ------------------------------------------------------------------------------ |
| 74 | |
| 75 | Memory map |
| 76 | 0x20000000 - 23FFFFFF SDRAM (64 MB) |
| 77 | 0xC0000000 - Cxxxxxxx Soldered Atmel Dataflash |
| 78 | |
| 79 | Environment variables |
| 80 | |
| 81 | U-Boot environment variables can be stored at different places: |
| 82 | - Dataflash on SPI chip select 0 |
| 83 | - Nand flash. |
| 84 | |
| 85 | You can choose your storage location at config step (here for at91sam9260ek) : |
| 86 | make at91sam9263ek_config - use data flash (spi cs0) (default) |
| 87 | make at91sam9263ek_nandflash_config - use nand flash |
| 88 | make at91sam9263ek_dataflash_cs0_config - use data flash (spi cs0) |