Tim Harvey | 552c358 | 2014-03-06 07:46:30 -0800 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2013 Gateworks Corporation |
| 3 | * |
| 4 | * Author: Tim Harvey <tharvey@gateworks.com> |
| 5 | * |
| 6 | * SPDX-License-Identifier: GPL-2.0+ |
| 7 | */ |
| 8 | |
| 9 | #include <asm/errno.h> |
| 10 | #include <common.h> |
| 11 | #include <i2c.h> |
| 12 | #include <linux/ctype.h> |
| 13 | |
| 14 | #include "gsc.h" |
| 15 | |
| 16 | #define MINMAX(n, percent) ((n)*(100-percent)/100), ((n)*(100+percent)/100) |
| 17 | |
| 18 | /* |
| 19 | * The Gateworks System Controller will fail to ACK a master transaction if |
| 20 | * it is busy, which can occur during its 1HZ timer tick while reading ADC's. |
| 21 | * When this does occur, it will never be busy long enough to fail more than |
| 22 | * 2 back-to-back transfers. Thus we wrap i2c_read and i2c_write with |
| 23 | * 3 retries. |
| 24 | */ |
| 25 | int gsc_i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len) |
| 26 | { |
| 27 | int retry = 3; |
| 28 | int n = 0; |
| 29 | int ret; |
| 30 | |
| 31 | while (n++ < retry) { |
| 32 | ret = i2c_read(chip, addr, alen, buf, len); |
| 33 | if (!ret) |
| 34 | break; |
| 35 | debug("%s: 0x%02x 0x%02x retry%d: %d\n", __func__, chip, addr, |
| 36 | n, ret); |
| 37 | if (ret != -ENODEV) |
| 38 | break; |
| 39 | mdelay(10); |
| 40 | } |
| 41 | return ret; |
| 42 | } |
| 43 | |
| 44 | int gsc_i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len) |
| 45 | { |
| 46 | int retry = 3; |
| 47 | int n = 0; |
| 48 | int ret; |
| 49 | |
| 50 | while (n++ < retry) { |
| 51 | ret = i2c_write(chip, addr, alen, buf, len); |
| 52 | if (!ret) |
| 53 | break; |
| 54 | debug("%s: 0x%02x 0x%02x retry%d: %d\n", __func__, chip, addr, |
| 55 | n, ret); |
| 56 | if (ret != -ENODEV) |
| 57 | break; |
| 58 | mdelay(10); |
| 59 | } |
| 60 | mdelay(1); |
| 61 | return ret; |
| 62 | } |
| 63 | |
| 64 | #ifdef CONFIG_CMD_GSC |
| 65 | static void read_hwmon(const char *name, uint reg, uint size, uint low, |
| 66 | uint high) |
| 67 | { |
| 68 | unsigned char buf[3]; |
| 69 | uint ui; |
| 70 | |
| 71 | printf("%-8s:", name); |
| 72 | memset(buf, 0, sizeof(buf)); |
| 73 | if (gsc_i2c_read(GSC_HWMON_ADDR, reg, 1, buf, size)) { |
| 74 | puts("fRD\n"); |
| 75 | } else { |
| 76 | ui = buf[0] | (buf[1]<<8) | (buf[2]<<16); |
| 77 | if (ui == 0xffffff) |
| 78 | printf("invalid"); |
| 79 | else if (ui < low) |
| 80 | printf("%d Failed - Low", ui); |
| 81 | else if (ui > high) |
| 82 | printf("%d Failed - High", ui); |
| 83 | else |
| 84 | printf("%d", ui); |
| 85 | } |
| 86 | puts("\n"); |
| 87 | } |
| 88 | |
| 89 | int do_gsc(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| 90 | { |
| 91 | const char *model = getenv("model"); |
| 92 | |
| 93 | i2c_set_bus_num(0); |
| 94 | read_hwmon("Temp", GSC_HWMON_TEMP, 2, 0, 9000); |
| 95 | read_hwmon("VIN", GSC_HWMON_VIN, 3, 8000, 60000); |
| 96 | read_hwmon("VBATT", GSC_HWMON_VBATT, 3, 1800, 3500); |
| 97 | read_hwmon("VDD_3P3", GSC_HWMON_VDD_3P3, 3, MINMAX(3300, 10)); |
| 98 | read_hwmon("VDD_HIGH", GSC_HWMON_VDD_HIGH, 3, MINMAX(3000, 10)); |
| 99 | read_hwmon("VDD_DDR", GSC_HWMON_VDD_DDR, 3, MINMAX(1500, 10)); |
| 100 | read_hwmon("VDD_5P0", GSC_HWMON_VDD_5P0, 3, MINMAX(5000, 10)); |
| 101 | read_hwmon("VDD_2P5", GSC_HWMON_VDD_2P5, 3, MINMAX(2500, 10)); |
| 102 | read_hwmon("VDD_1P8", GSC_HWMON_VDD_1P8, 3, MINMAX(1800, 10)); |
| 103 | |
| 104 | switch (model[3]) { |
| 105 | case '1': /* GW51xx */ |
| 106 | read_hwmon("VDD_CORE", GSC_HWMON_VDD_CORE, 3, MINMAX(1175, 10)); |
| 107 | read_hwmon("VDD_SOC", GSC_HWMON_VDD_SOC, 3, MINMAX(1175, 10)); |
| 108 | break; |
| 109 | case '2': /* GW52xx */ |
| 110 | case '3': /* GW53xx */ |
| 111 | read_hwmon("VDD_CORE", GSC_HWMON_VDD_CORE, 3, MINMAX(1175, 10)); |
| 112 | read_hwmon("VDD_SOC", GSC_HWMON_VDD_SOC, 3, MINMAX(1175, 10)); |
| 113 | read_hwmon("VDD_1P0", GSC_HWMON_VDD_1P0, 3, MINMAX(1000, 10)); |
| 114 | break; |
| 115 | case '4': /* GW54xx */ |
| 116 | read_hwmon("VDD_CORE", GSC_HWMON_VDD_CORE, 3, MINMAX(1375, 10)); |
| 117 | read_hwmon("VDD_SOC", GSC_HWMON_VDD_SOC, 3, MINMAX(1375, 10)); |
| 118 | read_hwmon("VDD_1P0", GSC_HWMON_VDD_1P0, 3, MINMAX(1000, 10)); |
| 119 | break; |
| 120 | } |
| 121 | return 0; |
| 122 | } |
| 123 | |
| 124 | U_BOOT_CMD(gsc, 1, 1, do_gsc, |
| 125 | "GSC test", |
| 126 | "" |
| 127 | ); |
| 128 | |
| 129 | #endif /* CONFIG_CMD_GSC */ |