blob: bee76572ac6c7682be314564f137a02df11e8e76 [file] [log] [blame]
Tom Rini10e47792018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Ying Zhang9ff70262013-08-16 15:16:11 +08002/*
3 * Copyright 2013 Freescale Semiconductor, Inc.
Ying Zhang9ff70262013-08-16 15:16:11 +08004 */
5
6#include <common.h>
Simon Glass63334482019-11-14 12:57:39 -07007#include <cpu_func.h>
Simon Glassf11478f2019-12-28 10:45:07 -07008#include <hang.h>
Ying Zhang9ff70262013-08-16 15:16:11 +08009#include <mmc.h>
10#include <malloc.h>
11
12/*
13 * The environment variables are written to just after the u-boot image
14 * on SDCard, so we must read the MBR to get the start address and code
15 * length of the u-boot image, then calculate the address of the env.
16 */
17#define ESDHC_BOOT_IMAGE_SIZE 0x48
18#define ESDHC_BOOT_IMAGE_ADDR 0x50
19#define MBRDBR_BOOT_SIG_55 0x1fe
20#define MBRDBR_BOOT_SIG_AA 0x1ff
21#define CONFIG_CFG_DATA_SECTOR 0
22
Prabhakar Kushwaha9ea255a2014-04-08 19:13:22 +053023
24void mmc_spl_load_image(uint32_t offs, unsigned int size, void *vdst)
25{
26 uint blk_start, blk_cnt, err;
27
28 struct mmc *mmc = find_mmc_device(0);
29 if (!mmc) {
30 puts("spl: mmc device not found!!\n");
31 hang();
32 }
33
34 if (mmc_init(mmc)) {
35 puts("MMC init failed\n");
36 return;
37 }
38
39 blk_start = ALIGN(offs, mmc->read_bl_len) / mmc->read_bl_len;
40 blk_cnt = ALIGN(size, mmc->read_bl_len) / mmc->read_bl_len;
41
Stephen Warrene73f2962015-12-07 11:38:48 -070042 err = mmc->block_dev.block_read(&mmc->block_dev, blk_start, blk_cnt,
43 vdst);
Prabhakar Kushwaha9ea255a2014-04-08 19:13:22 +053044 if (err != blk_cnt) {
45 puts("spl: mmc read failed!!\n");
46 hang();
47 }
48}
49
Ying Zhang9ff70262013-08-16 15:16:11 +080050/*
51 * The main entry for mmc booting. It's necessary that SDRAM is already
52 * configured and available since this code loads the main U-Boot image
53 * from mmc into SDRAM and starts it from there.
54 */
55
56void __noreturn mmc_boot(void)
57{
58 __attribute__((noreturn)) void (*uboot)(void);
59 uint blk_start, blk_cnt, err;
Prabhakar Kushwaha568bb762014-03-31 15:32:03 +053060#ifndef CONFIG_FSL_CORENET
Ying Zhang9ff70262013-08-16 15:16:11 +080061 uchar *tmp_buf;
Prabhakar Kushwaha568bb762014-03-31 15:32:03 +053062 u32 blklen;
Ying Zhang9ff70262013-08-16 15:16:11 +080063 uchar val;
64 uint i, byte_num;
Prabhakar Kushwaha568bb762014-03-31 15:32:03 +053065#endif
Ying Zhang9ff70262013-08-16 15:16:11 +080066 u32 offset, code_len;
67 struct mmc *mmc;
68
69 mmc = find_mmc_device(0);
70 if (!mmc) {
71 puts("spl: mmc device not found!!\n");
72 hang();
73 }
74
Priyanka Jain538f5f72013-11-28 10:12:16 +053075#ifdef CONFIG_FSL_CORENET
76 offset = CONFIG_SYS_MMC_U_BOOT_OFFS;
77 code_len = CONFIG_SYS_MMC_U_BOOT_SIZE;
78#else
Ying Zhang9ff70262013-08-16 15:16:11 +080079 blklen = mmc->read_bl_len;
80 tmp_buf = malloc(blklen);
81 if (!tmp_buf) {
82 puts("spl: malloc memory failed!!\n");
83 hang();
84 }
85 memset(tmp_buf, 0, blklen);
86
87 /*
88 * Read source addr from sd card
89 */
Stephen Warrene73f2962015-12-07 11:38:48 -070090 err = mmc->block_dev.block_read(&mmc->block_dev,
91 CONFIG_CFG_DATA_SECTOR, 1, tmp_buf);
Ying Zhang9ff70262013-08-16 15:16:11 +080092 if (err != 1) {
93 puts("spl: mmc read failed!!\n");
Ying Zhang9ff70262013-08-16 15:16:11 +080094 hang();
95 }
96
97 val = *(tmp_buf + MBRDBR_BOOT_SIG_55);
98 if (0x55 != val) {
99 puts("spl: mmc signature is not valid!!\n");
Ying Zhang9ff70262013-08-16 15:16:11 +0800100 hang();
101 }
102 val = *(tmp_buf + MBRDBR_BOOT_SIG_AA);
103 if (0xAA != val) {
104 puts("spl: mmc signature is not valid!!\n");
Ying Zhang9ff70262013-08-16 15:16:11 +0800105 hang();
106 }
107
108 byte_num = 4;
109 offset = 0;
110 for (i = 0; i < byte_num; i++) {
111 val = *(tmp_buf + ESDHC_BOOT_IMAGE_ADDR + i);
112 offset = (offset << 8) + val;
113 }
114 offset += CONFIG_SYS_MMC_U_BOOT_OFFS;
115 /* Get the code size from offset 0x48 */
116 byte_num = 4;
117 code_len = 0;
118 for (i = 0; i < byte_num; i++) {
119 val = *(tmp_buf + ESDHC_BOOT_IMAGE_SIZE + i);
120 code_len = (code_len << 8) + val;
121 }
122 code_len -= CONFIG_SYS_MMC_U_BOOT_OFFS;
123 /*
124 * Load U-Boot image from mmc into RAM
125 */
Priyanka Jain538f5f72013-11-28 10:12:16 +0530126#endif
Ying Zhang9ff70262013-08-16 15:16:11 +0800127 blk_start = ALIGN(offset, mmc->read_bl_len) / mmc->read_bl_len;
128 blk_cnt = ALIGN(code_len, mmc->read_bl_len) / mmc->read_bl_len;
Stephen Warrene73f2962015-12-07 11:38:48 -0700129 err = mmc->block_dev.block_read(&mmc->block_dev, blk_start, blk_cnt,
Ying Zhang9ff70262013-08-16 15:16:11 +0800130 (uchar *)CONFIG_SYS_MMC_U_BOOT_DST);
131 if (err != blk_cnt) {
132 puts("spl: mmc read failed!!\n");
Prabhakar Kushwaha568bb762014-03-31 15:32:03 +0530133#ifndef CONFIG_FSL_CORENET
Ying Zhang9ff70262013-08-16 15:16:11 +0800134 free(tmp_buf);
Prabhakar Kushwaha568bb762014-03-31 15:32:03 +0530135#endif
Ying Zhang9ff70262013-08-16 15:16:11 +0800136 hang();
137 }
138
139 /*
140 * Clean d-cache and invalidate i-cache, to
141 * make sure that no stale data is executed.
142 */
143 flush_cache(CONFIG_SYS_MMC_U_BOOT_DST, CONFIG_SYS_MMC_U_BOOT_SIZE);
144
145 /*
146 * Jump to U-Boot image
147 */
148 uboot = (void *)CONFIG_SYS_MMC_U_BOOT_START;
149 (*uboot)();
150}