blob: 9ab09793ec8026229c43019003ab1b036c924ded [file] [log] [blame]
Dirk Behme2781f802009-01-27 18:19:12 +01001
2Summary
3=======
4
5This README is about U-Boot support for TI's ARM Cortex-A8 based OMAP3 [1]
6family of SoCs. TI's OMAP3 SoC family contains an ARM Cortex-A8. Additionally,
7some family members contain a TMS320C64x+ DSP and/or an Imagination SGX 2D/3D
8graphics processor and various other standard peripherals.
9
10Currently the following boards are supported:
11
12* OMAP3530 BeagleBoard [2]
13
Dirk Behme220faba2009-01-28 21:39:57 +010014* Gumstix Overo [3]
15
Dirk Behmebb732be2009-01-28 21:39:58 +010016* TI EVM [4]
17
Dirk Behme7b84a7b2009-01-28 21:39:58 +010018* OpenPandora Ltd. Pandora [5]
19
Dirk Behmebab104e2009-01-28 21:40:16 +010020* TI/Logic PD Zoom MDK [6]
21
Tom Rix0419d912009-05-15 23:48:36 +020022* TI/Logic PD Zoom 2 [7]
23
Dirk Behme2781f802009-01-27 18:19:12 +010024Toolchain
25=========
26
27While ARM Cortex-A8 support ARM v7 instruction set (-march=armv7a) we compile
28with -march=armv5 to allow more compilers to work. For U-Boot code this has
29no performance impact.
30
31Build
32=====
33
34* BeagleBoard:
35
36make omap3_beagle_config
37make
38
Dirk Behme220faba2009-01-28 21:39:57 +010039* Gumstix Overo:
40
41make omap3_overo_config
42make
43
Dirk Behmebb732be2009-01-28 21:39:58 +010044* TI EVM:
45
46make omap3_evm_config
47make
48
Dirk Behme7b84a7b2009-01-28 21:39:58 +010049* Pandora:
50
51make omap3_pandora_config
52make
53
Dirk Behmebab104e2009-01-28 21:40:16 +010054* Zoom MDK:
55
56make omap3_zoom1_config
57make
58
Tom Rix0419d912009-05-15 23:48:36 +020059* Zoom 2:
60
61make omap3_zoom2_config
62make
63
Dirk Behme2781f802009-01-27 18:19:12 +010064Custom commands
65===============
66
67To make U-Boot for OMAP3 support NAND device SW or HW ECC calculation, U-Boot
68for OMAP3 supports custom user command
69
70nandecc hw/sw
71
72To be compatible with NAND drivers using SW ECC (e.g. kernel code)
73
74nandecc sw
75
76enables SW ECC calculation. HW ECC enabled with
77
78nandecc hw
79
80is typically used to write 2nd stage bootloader (known as 'x-loader') which is
81executed by OMAP3's boot rom and therefore has to be written with HW ECC.
82
83For all other commands see
84
85help
86
87Acknowledgements
88================
89
Tom Rix0419d912009-05-15 23:48:36 +020090OMAP3 U-Boot is based on U-Boot tar ball [8] for BeagleBoard and EVM done by
Dirk Behme2781f802009-01-27 18:19:12 +010091several TI employees.
92
93Links
94=====
95
96[1] OMAP3:
97
98http://www.ti.com/omap3 (high volume) and
99http://www.ti.com/omap35x (broad market)
100
101[2] OMAP3530 BeagleBoard:
102
103http://beagleboard.org/
104
Dirk Behme220faba2009-01-28 21:39:57 +0100105[3] Gumstix Overo:
106
107http://www.gumstix.net/Overo/
108
Dirk Behmebb732be2009-01-28 21:39:58 +0100109[4] TI EVM:
110
111http://focus.ti.com/docs/toolsw/folders/print/tmdxevm3503.html
112
Dirk Behme7b84a7b2009-01-28 21:39:58 +0100113[5] OpenPandora Ltd. Pandora:
114
115http://openpandora.org/
116
Dirk Behmebab104e2009-01-28 21:40:16 +0100117[6] TI/Logic PD Zoom MDK:
118
119http://www.logicpd.com/products/devkit/ti/zoom_mobile_development_kit
120
Tom Rix0419d912009-05-15 23:48:36 +0200121[7] TI/Logic PD Zoom 2
122
123http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf
124[8] TI OMAP3 U-Boot:
Dirk Behme2781f802009-01-27 18:19:12 +0100125
126http://beagleboard.googlecode.com/files/u-boot_beagle_revb.tar.gz
Tom Rix0419d912009-05-15 23:48:36 +0200127