Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | * Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225 |
| 2 | Voltage Regulator |
| 3 | |
| 4 | Required properties: |
| 5 | - compatible: "dlg,da9211" or "dlg,da9212" or "dlg,da9213" or "dlg,da9223" |
| 6 | or "dlg,da9214" or "dlg,da9224" or "dlg,da9215" or "dlg,da9225" |
| 7 | - reg: I2C slave address, usually 0x68. |
| 8 | - interrupts: the interrupt outputs of the controller |
| 9 | - regulators: A node that houses a sub-node for each regulator within the |
| 10 | device. Each sub-node is identified using the node's name, with valid |
| 11 | values listed below. The content of each sub-node is defined by the |
| 12 | standard binding for regulators; see regulator.txt. |
| 13 | BUCKA and BUCKB. |
| 14 | |
| 15 | Optional properties: |
| 16 | - enable-gpios: platform gpio for control of BUCKA/BUCKB. |
| 17 | - Any optional property defined in regulator.txt |
| 18 | - regulator-initial-mode and regulator-allowed-modes may be specified using |
| 19 | mode values from dt-bindings/regulator/dlg,da9211-regulator.h |
| 20 | |
| 21 | Example 1) DA9211 |
| 22 | pmic: da9211@68 { |
| 23 | compatible = "dlg,da9211"; |
| 24 | reg = <0x68>; |
| 25 | interrupts = <3 27>; |
| 26 | |
| 27 | regulators { |
| 28 | BUCKA { |
| 29 | regulator-name = "VBUCKA"; |
| 30 | regulator-min-microvolt = < 300000>; |
| 31 | regulator-max-microvolt = <1570000>; |
| 32 | regulator-min-microamp = <2000000>; |
| 33 | regulator-max-microamp = <5000000>; |
| 34 | enable-gpios = <&gpio 27 0>; |
| 35 | regulator-allowed-modes = <DA9211_BUCK_MODE_SYNC |
| 36 | DA9211_BUCK_MODE_AUTO>; |
| 37 | }; |
| 38 | }; |
| 39 | }; |
| 40 | |
| 41 | Example 2) DA9212 |
| 42 | pmic: da9212@68 { |
| 43 | compatible = "dlg,da9212"; |
| 44 | reg = <0x68>; |
| 45 | interrupts = <3 27>; |
| 46 | |
| 47 | regulators { |
| 48 | BUCKA { |
| 49 | regulator-name = "VBUCKA"; |
| 50 | regulator-min-microvolt = < 300000>; |
| 51 | regulator-max-microvolt = <1570000>; |
| 52 | regulator-min-microamp = <2000000>; |
| 53 | regulator-max-microamp = <5000000>; |
| 54 | enable-gpios = <&gpio 27 0>; |
| 55 | }; |
| 56 | BUCKB { |
| 57 | regulator-name = "VBUCKB"; |
| 58 | regulator-min-microvolt = < 300000>; |
| 59 | regulator-max-microvolt = <1570000>; |
| 60 | regulator-min-microamp = <2000000>; |
| 61 | regulator-max-microamp = <5000000>; |
| 62 | enable-gpios = <&gpio 17 0>; |
| 63 | }; |
| 64 | }; |
| 65 | }; |
| 66 | |
| 67 | Example 3) DA9213 |
| 68 | pmic: da9213@68 { |
| 69 | compatible = "dlg,da9213"; |
| 70 | reg = <0x68>; |
| 71 | interrupts = <3 27>; |
| 72 | |
| 73 | regulators { |
| 74 | BUCKA { |
| 75 | regulator-name = "VBUCKA"; |
| 76 | regulator-min-microvolt = < 300000>; |
| 77 | regulator-max-microvolt = <1570000>; |
| 78 | regulator-min-microamp = <3000000>; |
| 79 | regulator-max-microamp = <6000000>; |
| 80 | enable-gpios = <&gpio 27 0>; |
| 81 | }; |
| 82 | }; |
| 83 | }; |
| 84 | |
| 85 | Example 4) DA9223 |
| 86 | pmic: da9223@68 { |
| 87 | compatible = "dlg,da9223"; |
| 88 | reg = <0x68>; |
| 89 | interrupts = <3 27>; |
| 90 | |
| 91 | regulators { |
| 92 | BUCKA { |
| 93 | regulator-name = "VBUCKA"; |
| 94 | regulator-min-microvolt = < 300000>; |
| 95 | regulator-max-microvolt = <1570000>; |
| 96 | regulator-min-microamp = <3000000>; |
| 97 | regulator-max-microamp = <6000000>; |
| 98 | enable-gpios = <&gpio 27 0>; |
| 99 | }; |
| 100 | }; |
| 101 | }; |
| 102 | |
| 103 | Example 5) DA9214 |
| 104 | pmic: da9214@68 { |
| 105 | compatible = "dlg,da9214"; |
| 106 | reg = <0x68>; |
| 107 | interrupts = <3 27>; |
| 108 | |
| 109 | regulators { |
| 110 | BUCKA { |
| 111 | regulator-name = "VBUCKA"; |
| 112 | regulator-min-microvolt = < 300000>; |
| 113 | regulator-max-microvolt = <1570000>; |
| 114 | regulator-min-microamp = <3000000>; |
| 115 | regulator-max-microamp = <6000000>; |
| 116 | enable-gpios = <&gpio 27 0>; |
| 117 | }; |
| 118 | BUCKB { |
| 119 | regulator-name = "VBUCKB"; |
| 120 | regulator-min-microvolt = < 300000>; |
| 121 | regulator-max-microvolt = <1570000>; |
| 122 | regulator-min-microamp = <3000000>; |
| 123 | regulator-max-microamp = <6000000>; |
| 124 | enable-gpios = <&gpio 17 0>; |
| 125 | }; |
| 126 | }; |
| 127 | }; |
| 128 | |
| 129 | Example 6) DA9224 |
| 130 | pmic: da9224@68 { |
| 131 | compatible = "dlg,da9224"; |
| 132 | reg = <0x68>; |
| 133 | interrupts = <3 27>; |
| 134 | |
| 135 | regulators { |
| 136 | BUCKA { |
| 137 | regulator-name = "VBUCKA"; |
| 138 | regulator-min-microvolt = < 300000>; |
| 139 | regulator-max-microvolt = <1570000>; |
| 140 | regulator-min-microamp = <3000000>; |
| 141 | regulator-max-microamp = <6000000>; |
| 142 | enable-gpios = <&gpio 27 0>; |
| 143 | }; |
| 144 | BUCKB { |
| 145 | regulator-name = "VBUCKB"; |
| 146 | regulator-min-microvolt = < 300000>; |
| 147 | regulator-max-microvolt = <1570000>; |
| 148 | regulator-min-microamp = <3000000>; |
| 149 | regulator-max-microamp = <6000000>; |
| 150 | enable-gpios = <&gpio 17 0>; |
| 151 | }; |
| 152 | }; |
| 153 | }; |
| 154 | |
| 155 | Example 7) DA9215 |
| 156 | pmic: da9215@68 { |
| 157 | compatible = "dlg,da9215"; |
| 158 | reg = <0x68>; |
| 159 | interrupts = <3 27>; |
| 160 | |
| 161 | regulators { |
| 162 | BUCKA { |
| 163 | regulator-name = "VBUCKA"; |
| 164 | regulator-min-microvolt = < 300000>; |
| 165 | regulator-max-microvolt = <1570000>; |
| 166 | regulator-min-microamp = <4000000>; |
| 167 | regulator-max-microamp = <7000000>; |
| 168 | enable-gpios = <&gpio 27 0>; |
| 169 | }; |
| 170 | BUCKB { |
| 171 | regulator-name = "VBUCKB"; |
| 172 | regulator-min-microvolt = < 300000>; |
| 173 | regulator-max-microvolt = <1570000>; |
| 174 | regulator-min-microamp = <4000000>; |
| 175 | regulator-max-microamp = <7000000>; |
| 176 | enable-gpios = <&gpio 17 0>; |
| 177 | }; |
| 178 | }; |
| 179 | }; |
| 180 | |
| 181 | Example 8) DA9225 |
| 182 | pmic: da9225@68 { |
| 183 | compatible = "dlg,da9225"; |
| 184 | reg = <0x68>; |
| 185 | interrupts = <3 27>; |
| 186 | |
| 187 | regulators { |
| 188 | BUCKA { |
| 189 | regulator-name = "VBUCKA"; |
| 190 | regulator-min-microvolt = < 300000>; |
| 191 | regulator-max-microvolt = <1570000>; |
| 192 | regulator-min-microamp = <4000000>; |
| 193 | regulator-max-microamp = <7000000>; |
| 194 | enable-gpios = <&gpio 27 0>; |
| 195 | }; |
| 196 | BUCKB { |
| 197 | regulator-name = "VBUCKB"; |
| 198 | regulator-min-microvolt = < 300000>; |
| 199 | regulator-max-microvolt = <1570000>; |
| 200 | regulator-min-microamp = <4000000>; |
| 201 | regulator-max-microamp = <7000000>; |
| 202 | enable-gpios = <&gpio 17 0>; |
| 203 | }; |
| 204 | }; |
| 205 | }; |