| /* |
| * U-boot - Configuration file for BF537 STAMP board |
| */ |
| |
| #ifndef __CONFIG_BF537_H__ |
| #define __CONFIG_BF537_H__ |
| |
| #define CFG_LONGHELP 1 |
| #define CONFIG_CMDLINE_EDITING 1 |
| #define CONFIG_BAUDRATE 57600 |
| /* Set default serial console for bf537 */ |
| #define CONFIG_UART_CONSOLE 0 |
| #define CONFIG_BF537 1 |
| #define CONFIG_BOOTDELAY 5 |
| /* define CONFIG_BF537_STAMP_LEDCMD to enable LED command*/ |
| /*#define CONFIG_BF537_STAMP_LEDCMD 1*/ |
| |
| /* |
| * Boot Mode Set |
| * Blackfin can support several boot modes |
| */ |
| #define BF537_BYPASS_BOOT 0x0011 /* Bootmode 0: Execute from 16-bit externeal memory ( bypass BOOT ROM) */ |
| #define BF537_PARA_BOOT 0x0012 /* Bootmode 1: Boot from 8-bit or 16-bit flash */ |
| #define BF537_SPI_MASTER_BOOT 0x0014 /* Bootmode 3: SPI master mode boot from SPI flash */ |
| #define BF537_SPI_SLAVE_BOOT 0x0015 /* Bootmode 4: SPI slave mode boot from SPI flash */ |
| #define BF537_TWI_MASTER_BOOT 0x0016 /* Bootmode 5: TWI master mode boot from EEPROM */ |
| #define BF537_TWI_SLAVE_BOOT 0x0017 /* Bootmode 6: TWI slave mode boot from EEPROM */ |
| #define BF537_UART_BOOT 0x0018 /* Bootmode 7: UART slave mdoe boot via UART host */ |
| /* Define the boot mode */ |
| #define BFIN_BOOT_MODE BF537_BYPASS_BOOT |
| |
| #define CONFIG_PANIC_HANG 1 |
| |
| #define ADSP_BF534 0x34 |
| #define ADSP_BF536 0x36 |
| #define ADSP_BF537 0x37 |
| #define BFIN_CPU ADSP_BF537 |
| |
| /* This sets the default state of the cache on U-Boot's boot */ |
| #define CONFIG_ICACHE_ON |
| #define CONFIG_DCACHE_ON |
| |
| /* Define if want to do post memory test */ |
| #undef CONFIG_POST_TEST |
| |
| /* Define where the uboot will be loaded by on-chip boot rom */ |
| #define APP_ENTRY 0x00001000 |
| |
| #define CONFIG_RTC_BFIN 1 |
| #define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */ |
| |
| /* CONFIG_CLKIN_HZ is any value in Hz */ |
| #define CONFIG_CLKIN_HZ 25000000 |
| /* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN */ |
| /* 1=CLKIN/2 */ |
| #define CONFIG_CLKIN_HALF 0 |
| /* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass */ |
| /* 1=bypass PLL*/ |
| #define CONFIG_PLL_BYPASS 0 |
| /* CONFIG_VCO_MULT controls what the multiplier of the PLL is. */ |
| /* Values can range from 1-64 */ |
| #define CONFIG_VCO_MULT 20 |
| /* CONFIG_CCLK_DIV controls what the core clock divider is */ |
| /* Values can be 1, 2, 4, or 8 ONLY */ |
| #define CONFIG_CCLK_DIV 1 |
| /* CONFIG_SCLK_DIV controls what the peripheral clock divider is*/ |
| /* Values can range from 1-15 */ |
| #define CONFIG_SCLK_DIV 5 |
| /* CONFIG_SPI_BAUD controls the SPI peripheral clock divider */ |
| /* Values can range from 2-65535 */ |
| /* SCK Frequency = SCLK / (2 * CONFIG_SPI_BAUD) */ |
| #define CONFIG_SPI_BAUD 2 |
| #if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) |
| #define CONFIG_SPI_BAUD_INITBLOCK 4 |
| #endif |
| |
| #if ( CONFIG_CLKIN_HALF == 0 ) |
| #define CONFIG_VCO_HZ ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) |
| #else |
| #define CONFIG_VCO_HZ (( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 ) |
| #endif |
| |
| #if (CONFIG_PLL_BYPASS == 0) |
| #define CONFIG_CCLK_HZ ( CONFIG_VCO_HZ / CONFIG_CCLK_DIV ) |
| #define CONFIG_SCLK_HZ ( CONFIG_VCO_HZ / CONFIG_SCLK_DIV ) |
| #else |
| #define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ |
| #define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ |
| #endif |
| |
| #if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) |
| #if (CONFIG_SCLK_HZ / (2*CONFIG_SPI_BAUD) > 20000000) |
| #define CONFIG_SPI_FLASH_FAST_READ 1 /* Needed if SPI_CLK > 20 MHz */ |
| #else |
| #undef CONFIG_SPI_FLASH_FAST_READ |
| #endif |
| #endif |
| |
| #define CONFIG_MEM_SIZE 64 /* 128, 64, 32, 16 */ |
| #define CONFIG_MEM_ADD_WDTH 10 /* 8, 9, 10, 11 */ |
| #define CONFIG_MEM_MT48LC32M8A2_75 1 |
| |
| #define CONFIG_LOADS_ECHO 1 |
| |
| /* |
| * rarpb, bootp or dhcp commands will perform only a |
| * configuration lookup from the BOOTP/DHCP server |
| * but not try to load any image using TFTP |
| */ |
| #define CFG_AUTOLOAD "no" |
| |
| /* |
| * Network Settings |
| */ |
| /* network support */ |
| #if (BFIN_CPU != ADSP_BF534) |
| #define CONFIG_IPADDR 192.168.0.15 |
| #define CONFIG_NETMASK 255.255.255.0 |
| #define CONFIG_GATEWAYIP 192.168.0.1 |
| #define CONFIG_SERVERIP 192.168.0.2 |
| #define CONFIG_HOSTNAME BF537 |
| #endif |
| |
| #define CONFIG_ROOTPATH /romfs |
| /* Uncomment next line to use fixed MAC address */ |
| /* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ |
| /* This is the routine that copies the MAC in Flash to the 'ethaddr' setting */ |
| |
| #define CFG_LONGHELP 1 |
| #define CONFIG_BOOTDELAY 5 |
| #define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */ |
| #define CONFIG_BOOTCOMMAND "run ramboot" |
| |
| #if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) && defined(CONFIG_POST_TEST) |
| /* POST support */ |
| #define CONFIG_POST ( CFG_POST_MEMORY | \ |
| CFG_POST_UART | \ |
| CFG_POST_FLASH | \ |
| CFG_POST_ETHER | \ |
| CFG_POST_LED | \ |
| CFG_POST_BUTTON) |
| #else |
| #undef CONFIG_POST |
| #endif |
| |
| #ifdef CONFIG_POST |
| #define CFG_CMD_POST_DIAG CFG_CMD_DIAG |
| #define FLASH_START_POST_BLOCK 11 /* Should > = 11 */ |
| #define FLASH_END_POST_BLOCK 71 /* Should < = 71 */ |
| #else |
| #define CFG_CMD_POST_DIAG 0 |
| #endif |
| |
| /* CF-CARD IDE-HDD Support */ |
| |
| /* #define CONFIG_BFIN_TRUE_IDE */ /* Add CF flash card support */ |
| /* #define CONFIG_BFIN_CF_IDE */ /* Add CF flash card support */ |
| /* #define CONFIG_BFIN_HDD_IDE */ /* Add IDE Disk Drive (HDD) support */ |
| |
| #if defined(CONFIG_BFIN_CF_IDE) || defined(CONFIG_BFIN_HDD_IDE) || defined(CONFIG_BFIN_TRUE_IDE) |
| # define CONFIG_BFIN_IDE 1 |
| #endif |
| |
| /*#define CONFIG_BF537_NAND */ /* Add nand flash support */ |
| |
| #define CONFIG_NETCONSOLE 1 |
| #define CONFIG_NET_MULTI 1 |
| |
| |
| |
| /* |
| * Command line configuration. |
| */ |
| #include <config_cmd_default.h> |
| |
| #if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) || (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) |
| |
| #define CONFIG_CMD_ELF |
| #define CONFIG_CMD_I2C |
| #define CONFIG_CMD_CACHE |
| #define CONFIG_CMD_JFFS2 |
| #define CONFIG_CMD_EEPROM |
| #define CONFIG_CMD_DATE |
| |
| #if (BFIN_CPU == ADSP_BF534) |
| #undef CONFIG_CMD_NET |
| #else |
| #define CONFIG_CMD_PING |
| #endif |
| |
| #if defined(CONFIG_BFIN_CF_IDE) \ |
| || defined(CONFIG_BFIN_HDD_IDE) \ |
| || defined(CONFIG_BFIN_TRUE_IDE) |
| #define CONFIG_CMD_IDE |
| #endif |
| |
| #endif |
| |
| |
| #if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) |
| |
| #define CONFIG_CMD_DHCP |
| #define CONFIG_CMD_POST_DIAG |
| |
| #ifdef CONFIG_BF537_NAND |
| #define CONFIG_CMD_NAND |
| #endif |
| |
| #endif |
| |
| |
| |
| |
| #define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw console=ttyBF0,57600" |
| #define CONFIG_LOADADDR 0x1000000 |
| |
| #if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) |
| #if (BFIN_CPU != ADSP_BF534) |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ |
| "nfsargs=setenv bootargs root=/dev/nfs rw " \ |
| "nfsroot=$(serverip):$(rootpath) console=ttyBF0,57600\0"\ |
| "addip=setenv bootargs $(bootargs) " \ |
| "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ |
| ":$(hostname):eth0:off\0" \ |
| "ramboot=tftpboot $(loadaddr) linux;" \ |
| "run ramargs;run addip;bootelf\0" \ |
| "nfsboot=tftpboot $(loadaddr) linux;" \ |
| "run nfsargs;run addip;bootelf\0" \ |
| "flashboot=bootm 0x20100000\0" \ |
| "update=tftpboot $(loadaddr) u-boot.bin;" \ |
| "protect off 0x20000000 0x2007FFFF;" \ |
| "erase 0x20000000 0x2007FFFF;cp.b 0x1000000 0x20000000 $(filesize)\0" \ |
| "" |
| #else |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ |
| "flashboot=bootm 0x20100000\0" \ |
| "" |
| #endif |
| #elif (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) |
| #if (BFIN_CPU != ADSP_BF534) |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ |
| "nfsargs=setenv bootargs root=/dev/nfs rw " \ |
| "nfsroot=$(serverip):$(rootpath) console=ttyBF0,57600\0"\ |
| "addip=setenv bootargs $(bootargs) " \ |
| "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ |
| ":$(hostname):eth0:off\0" \ |
| "ramboot=tftpboot $(loadaddr) linux;" \ |
| "run ramargs;run addip;bootelf\0" \ |
| "nfsboot=tftpboot $(loadaddr) linux;" \ |
| "run nfsargs;run addip;bootelf\0" \ |
| "flashboot=bootm 0x20100000\0" \ |
| "update=tftpboot $(loadaddr) u-boot.ldr;" \ |
| "eeprom write $(loadaddr) 0x0 $(filesize);\0" \ |
| "" |
| #else |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ |
| "flashboot=bootm 0x20100000\0" \ |
| "" |
| #endif |
| #endif |
| |
| #if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) |
| #if (BFIN_CPU == ADSP_BF534) |
| #define CFG_PROMPT "serial_bf534> " /* Monitor Command Prompt */ |
| #elif (BFIN_CPU == ADSP_BF536) |
| #define CFG_PROMPT "serial_bf536> " /* Monitor Command Prompt */ |
| #else |
| #define CFG_PROMPT "serial_bf537> " /* Monitor Command Prompt */ |
| #endif |
| #else |
| #if (BFIN_CPU == ADSP_BF534) |
| #define CFG_PROMPT "bf534> " /* Monitor Command Prompt */ |
| #elif (BFIN_CPU == ADSP_BF536) |
| #define CFG_PROMPT "bf536> " /* Monitor Command Prompt */ |
| #else |
| #define CFG_PROMPT "bf537> " /* Monitor Command Prompt */ |
| #endif |
| #endif |
| |
| #if defined(CONFIG_CMD_KGDB) |
| #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ |
| #else |
| #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ |
| #endif |
| #define CFG_MAX_RAM_SIZE (CONFIG_MEM_SIZE * 1024*1024) |
| #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ |
| #define CFG_MAXARGS 16 /* max number of command args */ |
| #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ |
| #define CFG_MEMTEST_START 0x0 /* memtest works on */ |
| #define CFG_MEMTEST_END ( (CONFIG_MEM_SIZE - 1) * 1024*1024) /* 1 ... 63 MB in DRAM */ |
| #define CFG_LOAD_ADDR CONFIG_LOADADDR /* default load address */ |
| #define CFG_HZ 1000 /* decrementer freq: 10 ms ticks */ |
| #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } |
| #define CFG_SDRAM_BASE 0x00000000 |
| |
| #define CFG_FLASH_BASE 0x20000000 |
| |
| #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ |
| #define CFG_MONITOR_BASE (CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN) |
| #define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ |
| #define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) |
| #define CFG_GBL_DATA_SIZE 0x4000 |
| #define CFG_GBL_DATA_ADDR (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) |
| #define CONFIG_STACKBASE (CFG_GBL_DATA_ADDR - 4) |
| |
| #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ |
| #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ |
| #define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ |
| |
| #if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) || (BFIN_BOOT_MODE == BF537_UART_BOOT) |
| /* for bf537-stamp, usrt boot mode still store env in flash */ |
| #define CFG_ENV_IS_IN_FLASH 1 |
| #define CFG_ENV_ADDR 0x20004000 |
| #define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE) |
| #elif (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) |
| #define CFG_ENV_IS_IN_EEPROM 1 |
| #define CFG_ENV_OFFSET 0x4000 |
| #define CFG_ENV_HEADER (CFG_ENV_OFFSET + 0x16e) /* 0x12A is the length of LDR file header */ |
| #endif |
| #define CFG_ENV_SIZE 0x2000 |
| #define CFG_ENV_SECT_SIZE 0x2000 /* Total Size of Environment Sector */ |
| /* #if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) */ |
| #define ENV_IS_EMBEDDED |
| /* #endif */ |
| |
| /* JFFS Partition offset set */ |
| #define CFG_JFFS2_FIRST_BANK 0 |
| #define CFG_JFFS2_NUM_BANKS 1 |
| /* 512k reserved for u-boot */ |
| #define CFG_JFFS2_FIRST_SECTOR 15 |
| |
| #define CONFIG_SPI |
| |
| /* |
| * Stack sizes |
| */ |
| #define CONFIG_STACKSIZE (128*1024) /* regular stack */ |
| |
| #define POLL_MODE 1 |
| #define FLASH_TOT_SECT 71 |
| #define FLASH_SIZE 0x400000 |
| #define CFG_FLASH_SIZE 0x400000 |
| |
| /* |
| * Board NAND Infomation |
| */ |
| |
| #define CFG_NAND_ADDR 0x20212000 |
| #define CFG_NAND_BASE CFG_NAND_ADDR |
| #define CFG_MAX_NAND_DEVICE 1 |
| #define SECTORSIZE 512 |
| #define ADDR_COLUMN 1 |
| #define ADDR_PAGE 2 |
| #define ADDR_COLUMN_PAGE 3 |
| #define NAND_ChipID_UNKNOWN 0x00 |
| #define NAND_MAX_FLOORS 1 |
| #define NAND_MAX_CHIPS 1 |
| #define BFIN_NAND_READY PF3 |
| |
| #define NAND_WAIT_READY(nand) \ |
| do { \ |
| int timeout = 0; \ |
| while(!(*pPORTFIO & PF3)) \ |
| if (timeout++ > 100000) \ |
| break; \ |
| } while (0) |
| |
| #define BFIN_NAND_CLE (1<<2) /* A2 -> Command Enable */ |
| #define BFIN_NAND_ALE (1<<1) /* A1 -> Address Enable */ |
| |
| #define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | BFIN_NAND_CLE) = (__u8)(d); } while(0) |
| #define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | BFIN_NAND_ALE) = (__u8)(d); } while(0) |
| #define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) |
| #define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) |
| |
| /* |
| * Initialize PSD4256 registers for using I2C |
| */ |
| #define CONFIG_MISC_INIT_R |
| |
| #define CFG_BOOTM_LEN 0x4000000 /* Large Image Length, set to 64 Meg */ |
| |
| /* |
| * I2C settings |
| * By default PF1 is used as SDA and PF0 as SCL on the Stamp board |
| */ |
| /* #define CONFIG_SOFT_I2C 1*/ /* I2C bit-banged */ |
| #define CONFIG_HARD_I2C 1 /* I2C TWI */ |
| #if defined CONFIG_HARD_I2C |
| #define CONFIG_TWICLK_KHZ 50 |
| #endif |
| |
| #if defined CONFIG_SOFT_I2C |
| /* |
| * Software (bit-bang) I2C driver configuration |
| */ |
| #define PF_SCL PF0 |
| #define PF_SDA PF1 |
| |
| #define I2C_INIT (*pFIO_DIR |= PF_SCL); asm("ssync;") |
| #define I2C_ACTIVE (*pFIO_DIR |= PF_SDA); *pFIO_INEN &= ~PF_SDA; asm("ssync;") |
| #define I2C_TRISTATE (*pFIO_DIR &= ~PF_SDA); *pFIO_INEN |= PF_SDA; asm("ssync;") |
| #define I2C_READ ((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); asm("ssync;") |
| #define I2C_SDA(bit) if(bit) { \ |
| *pFIO_FLAG_S = PF_SDA; \ |
| asm("ssync;"); \ |
| } \ |
| else { \ |
| *pFIO_FLAG_C = PF_SDA; \ |
| asm("ssync;"); \ |
| } |
| #define I2C_SCL(bit) if(bit) { \ |
| *pFIO_FLAG_S = PF_SCL; \ |
| asm("ssync;"); \ |
| } \ |
| else { \ |
| *pFIO_FLAG_C = PF_SCL; \ |
| asm("ssync;"); \ |
| } |
| #define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ |
| #endif |
| |
| #define CFG_I2C_SPEED 50000 |
| #define CFG_I2C_SLAVE 0xFE |
| |
| /* 0xFF, 0x7BB07BB0, 0x22547BB0 */ |
| /* #define AMGCTLVAL (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN) |
| #define AMBCTL0VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B1TT_4 | ~B1RDYPOL | \ |
| ~B1RDYEN | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3 | B0TT_4 | ~B0RDYPOL | ~B0RDYEN) |
| #define AMBCTL1VAL (B3WAT_2 | B3RAT_2 | B3HT_1 | B3ST_1 | B3TT_4 | B3RDYPOL | ~B3RDYEN | \ |
| B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3 | B2TT_4 | ~B2RDYPOL | ~B2RDYEN) |
| */ |
| |
| #define AMGCTLVAL 0xFF |
| #define AMBCTL0VAL 0x7BB07BB0 |
| #define AMBCTL1VAL 0xFFC27BB0 |
| |
| #define CONFIG_VDSP 1 |
| |
| #ifdef CONFIG_VDSP |
| #define ET_EXEC_VDSP 0x8 |
| #define SHT_STRTAB_VDSP 0x1 |
| #define ELFSHDRSIZE_VDSP 0x2C |
| #define VDSP_ENTRY_ADDR 0xFFA00000 |
| #endif |
| |
| #if defined(CONFIG_BFIN_IDE) |
| |
| #define CONFIG_DOS_PARTITION 1 |
| /* |
| * IDE/ATA stuff |
| */ |
| #undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ |
| #undef CONFIG_IDE_LED /* no led for ide supported */ |
| #undef CONFIG_IDE_RESET /* no reset for ide supported */ |
| |
| #define CFG_IDE_MAXBUS 1 /* max. 1 IDE busses */ |
| #define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */ |
| |
| #undef AMBCTL1VAL |
| #define AMBCTL1VAL 0xFFC3FFC3 |
| |
| #define CONFIG_CF_ATASEL_DIS 0x20311800 |
| #define CONFIG_CF_ATASEL_ENA 0x20311802 |
| |
| #if defined(CONFIG_BFIN_TRUE_IDE) |
| /* |
| * Note that these settings aren't for the most part used in include/ata.h |
| * when all of the ATA registers are setup |
| */ |
| #define CFG_ATA_BASE_ADDR 0x2031C000 |
| #define CFG_ATA_IDE0_OFFSET 0x0000 |
| #define CFG_ATA_DATA_OFFSET 0x0020 /* Offset for data I/O */ |
| #define CFG_ATA_REG_OFFSET 0x0020 /* Offset for normal register accesses */ |
| #define CFG_ATA_ALT_OFFSET 0x001C /* Offset for alternate registers */ |
| #define CFG_ATA_STRIDE 2 /* CF.A0 --> Blackfin.Ax */ |
| #endif /* CONFIG_BFIN_TRUE_IDE */ |
| |
| #if defined(CONFIG_BFIN_CF_IDE) /* USE CompactFlash Storage Card in the common memory space */ |
| #define CFG_ATA_BASE_ADDR 0x20211800 |
| #define CFG_ATA_IDE0_OFFSET 0x0000 |
| #define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */ |
| #define CFG_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */ |
| #define CFG_ATA_ALT_OFFSET 0x000E /* Offset for alternate registers */ |
| #define CFG_ATA_STRIDE 1 /* CF.A0 --> Blackfin.Ax */ |
| #endif /* CONFIG_BFIN_CF_IDE */ |
| |
| #if defined(CONFIG_BFIN_HDD_IDE) /* USE TRUE IDE */ |
| #define CFG_ATA_BASE_ADDR 0x20314000 |
| #define CFG_ATA_IDE0_OFFSET 0x0000 |
| #define CFG_ATA_DATA_OFFSET 0x0020 /* Offset for data I/O */ |
| #define CFG_ATA_REG_OFFSET 0x0020 /* Offset for normal register accesses */ |
| #define CFG_ATA_ALT_OFFSET 0x001C /* Offset for alternate registers */ |
| #define CFG_ATA_STRIDE 2 /* CF.A0 --> Blackfin.A1 */ |
| |
| #undef CONFIG_SCLK_DIV |
| #define CONFIG_SCLK_DIV 8 |
| #endif /* CONFIG_BFIN_HDD_IDE */ |
| |
| #endif /*CONFIG_BFIN_IDE */ |
| |
| #endif |