| /* |
| * Startup Code for MIPS32 CPU-core |
| * |
| * Copyright (c) 2003 Wolfgang Denk <wd@denx.de> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <asm-offsets.h> |
| #include <config.h> |
| #include <asm/regdef.h> |
| #include <asm/mipsregs.h> |
| |
| #ifndef CONFIG_SYS_MIPS_CACHE_MODE |
| #define CONFIG_SYS_MIPS_CACHE_MODE CONF_CM_CACHABLE_NONCOHERENT |
| #endif |
| |
| /* |
| * For the moment disable interrupts, mark the kernel mode and |
| * set ST0_KX so that the CPU does not spit fire when using |
| * 64-bit addresses. |
| */ |
| .macro setup_c0_status set clr |
| .set push |
| mfc0 t0, CP0_STATUS |
| or t0, ST0_CU0 | \set | 0x1f | \clr |
| xor t0, 0x1f | \clr |
| mtc0 t0, CP0_STATUS |
| .set noreorder |
| sll zero, 3 # ehb |
| .set pop |
| .endm |
| |
| .macro setup_c0_status_reset |
| #ifdef CONFIG_64BIT |
| setup_c0_status ST0_KX 0 |
| #else |
| setup_c0_status 0 0 |
| #endif |
| .endm |
| |
| #define RVECENT(f,n) \ |
| b f; nop |
| #define XVECENT(f,bev) \ |
| b f ; \ |
| li k0,bev |
| |
| .set noreorder |
| |
| .globl _start |
| .text |
| _start: |
| RVECENT(reset,0) # U-boot entry point |
| RVECENT(reset,1) # software reboot |
| #ifdef CONFIG_SYS_XWAY_EBU_BOOTCFG |
| /* |
| * Almost all Lantiq XWAY SoC devices have an external bus unit (EBU) to |
| * access external NOR flashes. If the board boots from NOR flash the |
| * internal BootROM does a blind read at address 0xB0000010 to read the |
| * initial configuration for that EBU in order to access the flash |
| * device with correct parameters. This config option is board-specific. |
| */ |
| .word CONFIG_SYS_XWAY_EBU_BOOTCFG |
| .word 0x00000000 |
| #else |
| RVECENT(romReserved,2) |
| #endif |
| RVECENT(romReserved,3) |
| RVECENT(romReserved,4) |
| RVECENT(romReserved,5) |
| RVECENT(romReserved,6) |
| RVECENT(romReserved,7) |
| RVECENT(romReserved,8) |
| RVECENT(romReserved,9) |
| RVECENT(romReserved,10) |
| RVECENT(romReserved,11) |
| RVECENT(romReserved,12) |
| RVECENT(romReserved,13) |
| RVECENT(romReserved,14) |
| RVECENT(romReserved,15) |
| RVECENT(romReserved,16) |
| RVECENT(romReserved,17) |
| RVECENT(romReserved,18) |
| RVECENT(romReserved,19) |
| RVECENT(romReserved,20) |
| RVECENT(romReserved,21) |
| RVECENT(romReserved,22) |
| RVECENT(romReserved,23) |
| RVECENT(romReserved,24) |
| RVECENT(romReserved,25) |
| RVECENT(romReserved,26) |
| RVECENT(romReserved,27) |
| RVECENT(romReserved,28) |
| RVECENT(romReserved,29) |
| RVECENT(romReserved,30) |
| RVECENT(romReserved,31) |
| RVECENT(romReserved,32) |
| RVECENT(romReserved,33) |
| RVECENT(romReserved,34) |
| RVECENT(romReserved,35) |
| RVECENT(romReserved,36) |
| RVECENT(romReserved,37) |
| RVECENT(romReserved,38) |
| RVECENT(romReserved,39) |
| RVECENT(romReserved,40) |
| RVECENT(romReserved,41) |
| RVECENT(romReserved,42) |
| RVECENT(romReserved,43) |
| RVECENT(romReserved,44) |
| RVECENT(romReserved,45) |
| RVECENT(romReserved,46) |
| RVECENT(romReserved,47) |
| RVECENT(romReserved,48) |
| RVECENT(romReserved,49) |
| RVECENT(romReserved,50) |
| RVECENT(romReserved,51) |
| RVECENT(romReserved,52) |
| RVECENT(romReserved,53) |
| RVECENT(romReserved,54) |
| RVECENT(romReserved,55) |
| RVECENT(romReserved,56) |
| RVECENT(romReserved,57) |
| RVECENT(romReserved,58) |
| RVECENT(romReserved,59) |
| RVECENT(romReserved,60) |
| RVECENT(romReserved,61) |
| RVECENT(romReserved,62) |
| RVECENT(romReserved,63) |
| XVECENT(romExcHandle,0x200) # bfc00200: R4000 tlbmiss vector |
| RVECENT(romReserved,65) |
| RVECENT(romReserved,66) |
| RVECENT(romReserved,67) |
| RVECENT(romReserved,68) |
| RVECENT(romReserved,69) |
| RVECENT(romReserved,70) |
| RVECENT(romReserved,71) |
| RVECENT(romReserved,72) |
| RVECENT(romReserved,73) |
| RVECENT(romReserved,74) |
| RVECENT(romReserved,75) |
| RVECENT(romReserved,76) |
| RVECENT(romReserved,77) |
| RVECENT(romReserved,78) |
| RVECENT(romReserved,79) |
| XVECENT(romExcHandle,0x280) # bfc00280: R4000 xtlbmiss vector |
| RVECENT(romReserved,81) |
| RVECENT(romReserved,82) |
| RVECENT(romReserved,83) |
| RVECENT(romReserved,84) |
| RVECENT(romReserved,85) |
| RVECENT(romReserved,86) |
| RVECENT(romReserved,87) |
| RVECENT(romReserved,88) |
| RVECENT(romReserved,89) |
| RVECENT(romReserved,90) |
| RVECENT(romReserved,91) |
| RVECENT(romReserved,92) |
| RVECENT(romReserved,93) |
| RVECENT(romReserved,94) |
| RVECENT(romReserved,95) |
| XVECENT(romExcHandle,0x300) # bfc00300: R4000 cache vector |
| RVECENT(romReserved,97) |
| RVECENT(romReserved,98) |
| RVECENT(romReserved,99) |
| RVECENT(romReserved,100) |
| RVECENT(romReserved,101) |
| RVECENT(romReserved,102) |
| RVECENT(romReserved,103) |
| RVECENT(romReserved,104) |
| RVECENT(romReserved,105) |
| RVECENT(romReserved,106) |
| RVECENT(romReserved,107) |
| RVECENT(romReserved,108) |
| RVECENT(romReserved,109) |
| RVECENT(romReserved,110) |
| RVECENT(romReserved,111) |
| XVECENT(romExcHandle,0x380) # bfc00380: R4000 general vector |
| RVECENT(romReserved,113) |
| RVECENT(romReserved,114) |
| RVECENT(romReserved,115) |
| RVECENT(romReserved,116) |
| RVECENT(romReserved,116) |
| RVECENT(romReserved,118) |
| RVECENT(romReserved,119) |
| RVECENT(romReserved,120) |
| RVECENT(romReserved,121) |
| RVECENT(romReserved,122) |
| RVECENT(romReserved,123) |
| RVECENT(romReserved,124) |
| RVECENT(romReserved,125) |
| RVECENT(romReserved,126) |
| RVECENT(romReserved,127) |
| |
| /* |
| * We hope there are no more reserved vectors! |
| * 128 * 8 == 1024 == 0x400 |
| * so this is address R_VEC+0x400 == 0xbfc00400 |
| */ |
| .align 4 |
| reset: |
| |
| /* Clear watch registers */ |
| mtc0 zero, CP0_WATCHLO |
| mtc0 zero, CP0_WATCHHI |
| |
| /* WP(Watch Pending), SW0/1 should be cleared */ |
| mtc0 zero, CP0_CAUSE |
| |
| setup_c0_status_reset |
| |
| /* Init Timer */ |
| mtc0 zero, CP0_COUNT |
| mtc0 zero, CP0_COMPARE |
| |
| #ifndef CONFIG_SKIP_LOWLEVEL_INIT |
| /* CONFIG0 register */ |
| li t0, CONF_CM_UNCACHED |
| mtc0 t0, CP0_CONFIG |
| #endif |
| |
| /* Initialize $gp */ |
| bal 1f |
| nop |
| .word _gp |
| 1: |
| lw gp, 0(ra) |
| |
| #ifndef CONFIG_SKIP_LOWLEVEL_INIT |
| /* Initialize any external memory */ |
| la t9, lowlevel_init |
| jalr t9 |
| nop |
| |
| /* Initialize caches... */ |
| la t9, mips_cache_reset |
| jalr t9 |
| nop |
| |
| /* ... and enable them */ |
| li t0, CONFIG_SYS_MIPS_CACHE_MODE |
| mtc0 t0, CP0_CONFIG |
| #endif |
| |
| /* Set up temporary stack */ |
| li sp, CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_INIT_SP_OFFSET |
| |
| la t9, board_init_f |
| jr t9 |
| nop |
| |
| /* |
| * void relocate_code (addr_sp, gd, addr_moni) |
| * |
| * This "function" does not return, instead it continues in RAM |
| * after relocating the monitor code. |
| * |
| * a0 = addr_sp |
| * a1 = gd |
| * a2 = destination address |
| */ |
| .globl relocate_code |
| .ent relocate_code |
| relocate_code: |
| move sp, a0 # set new stack pointer |
| |
| move s0, a1 # save gd in s0 |
| move s2, a2 # save destination address in s2 |
| |
| li t0, CONFIG_SYS_MONITOR_BASE |
| sub s1, s2, t0 # s1 <-- relocation offset |
| |
| la t3, in_ram |
| lw t2, -12(t3) # t2 <-- uboot_end_data |
| move t1, a2 |
| |
| add gp, s1 # adjust gp |
| |
| /* |
| * t0 = source address |
| * t1 = target address |
| * t2 = source end address |
| */ |
| |
| /* |
| * Save destination address and size for later usage in flush_cache() |
| */ |
| move a0, t1 # a0 <-- destination addr |
| sub a1, t2, t0 # a1 <-- size |
| |
| 1: |
| lw t3, 0(t0) |
| sw t3, 0(t1) |
| addu t0, 4 |
| blt t0, t2, 1b |
| addu t1, 4 |
| |
| /* If caches were enabled, we would have to flush them here. */ |
| |
| /* a0 & a1 are already set up for flush_cache(start, size) */ |
| la t9, flush_cache |
| jalr t9 |
| nop |
| |
| /* Jump to where we've relocated ourselves */ |
| addi t0, s2, in_ram - _start |
| jr t0 |
| nop |
| |
| .word _gp |
| .word _GLOBAL_OFFSET_TABLE_ |
| .word uboot_end_data |
| .word uboot_end |
| .word num_got_entries |
| |
| in_ram: |
| /* |
| * Now we want to update GOT. |
| * |
| * GOT[0] is reserved. GOT[1] is also reserved for the dynamic object |
| * generated by GNU ld. Skip these reserved entries from relocation. |
| */ |
| lw t3, -4(t0) # t3 <-- num_got_entries |
| lw t4, -16(t0) # t4 <-- _GLOBAL_OFFSET_TABLE_ |
| lw t5, -20(t0) # t5 <-- _gp |
| sub t4, t5 # compute offset |
| add t4, t4, gp # t4 now holds relocated _G_O_T_ |
| addi t4, t4, 8 # skipping first two entries |
| li t2, 2 |
| 1: |
| lw t1, 0(t4) |
| beqz t1, 2f |
| add t1, s1 |
| sw t1, 0(t4) |
| 2: |
| addi t2, 1 |
| blt t2, t3, 1b |
| addi t4, 4 |
| |
| /* Clear BSS */ |
| lw t1, -12(t0) # t1 <-- uboot_end_data |
| lw t2, -8(t0) # t2 <-- uboot_end |
| add t1, s1 # adjust pointers |
| add t2, s1 |
| |
| sub t1, 4 |
| 1: |
| addi t1, 4 |
| bltl t1, t2, 1b |
| sw zero, 0(t1) |
| |
| move a0, s0 # a0 <-- gd |
| la t9, board_init_r |
| jr t9 |
| move a1, s2 |
| |
| .end relocate_code |
| |
| /* Exception handlers */ |
| romReserved: |
| b romReserved |
| nop |
| |
| romExcHandle: |
| b romExcHandle |
| nop |