board/samsung/goni/goni.c

/*
 *  Copyright (C) 2008-2009 Samsung Electronics
 *  Minkyu Kang <mk7.kang@samsung.com>
 *  Kyungmin Park <kyungmin.park@samsung.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#include <common.h>
#include <asm/gpio.h>
#include <asm/arch/mmc.h>
#include <power/pmic.h>
#include <usb/dwc2_udc.h>
#include <asm/arch/cpu.h>
#include <power/max8998_pmic.h>
#include <samsung/misc.h>
#include <usb.h>
#include <usb_mass_storage.h>

DECLARE_GLOBAL_DATA_PTR;

u32 get_board_rev(void)
{
	return 0;
}

int board_init(void)
{
	/* Set Initial global variables */
	gd->bd->bi_arch_number = MACH_TYPE_GONI;
	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;

	return 0;
}

#ifdef CONFIG_SYS_I2C_INIT_BOARD
void i2c_init_board(void)
{
	gpio_request(S5PC110_GPIO_J43, "i2c_clk");
	gpio_request(S5PC110_GPIO_J40, "i2c_data");
	gpio_direction_output(S5PC110_GPIO_J43, 1);
	gpio_direction_output(S5PC110_GPIO_J40, 1);
}
#endif

int power_init_board(void)
{
	/*
	 * For PMIC the I2C bus is named as I2C5, but it is connected
	 * to logical I2C adapter 0
	 */
	return pmic_init(I2C_0);
}

int dram_init(void)
{
	gd->ram_size = PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE +
			PHYS_SDRAM_3_SIZE;

	return 0;
}

void dram_init_banksize(void)
{
	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
	gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
	gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
}

#ifdef CONFIG_DISPLAY_BOARDINFO
int checkboard(void)
{
	puts("Board:\tGoni\n");
	return 0;
}
#endif

#ifdef CONFIG_GENERIC_MMC
int board_mmc_init(bd_t *bis)
{
	int i, ret, ret_sd = 0;

	/* MASSMEMORY_EN: XMSMDATA7: GPJ2[7] output high */
	gpio_request(S5PC110_GPIO_J27, "massmemory_en");
	gpio_direction_output(S5PC110_GPIO_J27, 1);

	/*
	 * MMC0 GPIO
	 * GPG0[0]	SD_0_CLK
	 * GPG0[1]	SD_0_CMD
	 * GPG0[2]	SD_0_CDn	-> Not used
	 * GPG0[3:6]	SD_0_DATA[0:3]
	 */
	for (i = S5PC110_GPIO_G00; i < S5PC110_GPIO_G07; i++) {
		if (i == S5PC110_GPIO_G02)
			continue;
		/* GPG0[0:6] special function 2 */
		gpio_cfg_pin(i, 0x2);
		/* GPG0[0:6] pull disable */
		gpio_set_pull(i, S5P_GPIO_PULL_NONE);
		/* GPG0[0:6] drv 4x */
		gpio_set_drv(i, S5P_GPIO_DRV_4X);
	}

	ret = s5p_mmc_init(0, 4);
	if (ret)
		error("MMC: Failed to init MMC:0.\n");

	/*
	 * SD card (T_FLASH) detect and init
	 * T_FLASH_DETECT: EINT28: GPH3[4] input mode
	 */
	gpio_request(S5PC110_GPIO_H34, "t_flash_detect");
	gpio_cfg_pin(S5PC110_GPIO_H34, S5P_GPIO_INPUT);
	gpio_set_pull(S5PC110_GPIO_H34, S5P_GPIO_PULL_UP);

	if (!gpio_get_value(S5PC110_GPIO_H34)) {
		for (i = S5PC110_GPIO_G20; i < S5PC110_GPIO_G27; i++) {
			if (i == S5PC110_GPIO_G22)
				continue;

			/* GPG2[0:6] special function 2 */
			gpio_cfg_pin(i, 0x2);
			/* GPG2[0:6] pull disable */
			gpio_set_pull(i, S5P_GPIO_PULL_NONE);
			/* GPG2[0:6] drv 4x */
			gpio_set_drv(i, S5P_GPIO_DRV_4X);
		}

		ret_sd = s5p_mmc_init(2, 4);
		if (ret_sd)
			error("MMC: Failed to init SD card (MMC:2).\n");
	}

	return ret & ret_sd;
}
#endif

#ifdef CONFIG_USB_GADGET
static int s5pc1xx_phy_control(int on)
{
	int ret;
	static int status;
	struct pmic *p = pmic_get("MAX8998_PMIC");
	if (!p)
		return -ENODEV;

	if (pmic_probe(p))
		return -1;

	if (on && !status) {
		ret = pmic_set_output(p, MAX8998_REG_ONOFF1,
				      MAX8998_LDO3, LDO_ON);
		ret = pmic_set_output(p, MAX8998_REG_ONOFF2,
				      MAX8998_LDO8, LDO_ON);
		if (ret) {
			puts("MAX8998 LDO setting error!\n");
			return -1;
		}
		status = 1;
	} else if (!on && status) {
		ret = pmic_set_output(p, MAX8998_REG_ONOFF1,
				      MAX8998_LDO3, LDO_OFF);
		ret = pmic_set_output(p, MAX8998_REG_ONOFF2,
				      MAX8998_LDO8, LDO_OFF);
		if (ret) {
			puts("MAX8998 LDO setting error!\n");
			return -1;
		}
		status = 0;
	}
	udelay(10000);

	return 0;
}

struct dwc2_plat_otg_data s5pc110_otg_data = {
	.phy_control = s5pc1xx_phy_control,
	.regs_phy = S5PC110_PHY_BASE,
	.regs_otg = S5PC110_OTG_BASE,
	.usb_phy_ctrl = S5PC110_USB_PHY_CONTROL,
};

int board_usb_init(int index, enum usb_init_type init)
{
	debug("USB_udc_probe\n");
	return dwc2_udc_probe(&s5pc110_otg_data);
}
#endif

#ifdef CONFIG_MISC_INIT_R
int misc_init_r(void)
{
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
	set_board_info();
#endif
	return 0;
}
#endif

int board_usb_cleanup(int index, enum usb_init_type init)
{
	return 0;
}