| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Qualcomm APQ8016 based Dragonboard 410C board device tree source |
| * |
| * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com> |
| */ |
| |
| /dts-v1/; |
| |
| #include "skeleton64.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/pinctrl/pinctrl-snapdragon.h> |
| |
| / { |
| model = "Qualcomm Technologies, Inc. Dragonboard 410c"; |
| compatible = "qcom,dragonboard", "qcom,apq8016-sbc"; |
| qcom,msm-id = <0xce 0x0 0xf8 0x0 0xf9 0x0 0xfa 0x0 0xf7 0x0>; |
| qcom,board-id = <0x10018 0x0>; |
| #address-cells = <0x2>; |
| #size-cells = <0x2>; |
| |
| aliases { |
| usb0 = "/soc/ehci@78d9000"; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0 0x80000000 0 0x3da00000>; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| smem_mem: smem_region@86300000 { |
| reg = <0x0 0x86300000 0x0 0x100000>; |
| no-map; |
| }; |
| }; |
| |
| chosen { |
| stdout-path = "/soc/serial@78b0000"; |
| }; |
| |
| smem { |
| compatible = "qcom,smem"; |
| memory-region = <&smem_mem>; |
| qcom,rpm-msg-ram = <&rpm_msg_ram>; |
| }; |
| |
| soc { |
| #address-cells = <0x1>; |
| #size-cells = <0x1>; |
| ranges = <0x0 0x0 0x0 0xffffffff>; |
| compatible = "simple-bus"; |
| |
| rpm_msg_ram: memory@60000 { |
| compatible = "qcom,rpm-msg-ram"; |
| reg = <0x60000 0x8000>; |
| }; |
| |
| soc_gpios: pinctrl@1000000 { |
| compatible = "qcom,msm8916-pinctrl"; |
| reg = <0x1000000 0x400000>; |
| gpio-controller; |
| gpio-count = <122>; |
| gpio-bank-name="soc"; |
| #gpio-cells = <2>; |
| |
| blsp1_uart: uart { |
| function = "blsp1_uart"; |
| pins = "GPIO_4", "GPIO_5"; |
| drive-strength = <DRIVE_STRENGTH_8MA>; |
| bias-disable; |
| }; |
| }; |
| clkc: qcom,gcc@1800000 { |
| compatible = "qcom,gcc-apq8016"; |
| reg = <0x1800000 0x80000>; |
| #address-cells = <0x1>; |
| #size-cells = <0x0>; |
| }; |
| |
| serial@78b0000 { |
| compatible = "qcom,msm-uartdm-v1.4"; |
| reg = <0x78b0000 0x200>; |
| clock = <&clkc 4>; |
| pinctrl-names = "uart"; |
| pinctrl-0 = <&blsp1_uart>; |
| }; |
| |
| ehci@78d9000 { |
| compatible = "qcom,ehci-host"; |
| reg = <0x78d9000 0x400>; |
| phys = <&ehci_phy>; |
| }; |
| |
| ehci_phy: ehci_phy@78d9000 { |
| compatible = "qcom,apq8016-usbphy"; |
| reg = <0x78d9000 0x400>; |
| #phy-cells = <0>; |
| }; |
| |
| sdhci@07824000 { |
| compatible = "qcom,sdhci-msm-v4"; |
| reg = <0x7824900 0x11c 0x7824000 0x800>; |
| bus-width = <0x8>; |
| index = <0x0>; |
| non-removable; |
| clock = <&clkc 0>; |
| clock-frequency = <100000000>; |
| }; |
| |
| sdhci@07864000 { |
| compatible = "qcom,sdhci-msm-v4"; |
| reg = <0x7864900 0x11c 0x7864000 0x800>; |
| index = <0x1>; |
| bus-width = <0x4>; |
| clock = <&clkc 1>; |
| clock-frequency = <200000000>; |
| cd-gpios = <&soc_gpios 38 GPIO_ACTIVE_LOW>; |
| }; |
| |
| wcnss { |
| bt { |
| compatible="qcom,wcnss-bt"; |
| }; |
| |
| wifi { |
| compatible="qcom,wcnss-wlan"; |
| }; |
| }; |
| |
| spmi_bus: spmi@200f000 { |
| compatible = "qcom,spmi-pmic-arb"; |
| reg = <0x0200f000 0x001000>, |
| <0x02400000 0x400000>, |
| <0x02c00000 0x400000>, |
| <0x03800000 0x200000>, |
| <0x0200a000 0x002100>; |
| reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; |
| #address-cells = <0x1>; |
| #size-cells = <0x1>; |
| pmic0: pm8916@0 { |
| compatible = "qcom,spmi-pmic"; |
| reg = <0x0 0x1>; |
| #address-cells = <0x1>; |
| #size-cells = <0x1>; |
| |
| pm8916_pon: pm8916_pon@800 { |
| compatible = "qcom,pm8916-pwrkey"; |
| reg = <0x800 0x96>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| }; |
| |
| pm8916_gpios: pm8916_gpios@c000 { |
| compatible = "qcom,pm8916-gpio"; |
| reg = <0xc000 0x400>; |
| gpio-controller; |
| gpio-count = <4>; |
| #gpio-cells = <2>; |
| gpio-bank-name="pmic"; |
| }; |
| }; |
| |
| pmic1: pm8916@1 { |
| compatible = "qcom,spmi-pmic"; |
| reg = <0x1 0x1>; |
| }; |
| }; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| user1 { |
| label = "green:user1"; |
| gpios = <&soc_gpios 21 0>; |
| }; |
| |
| user2 { |
| label = "green:user2"; |
| gpios = <&soc_gpios 120 0>; |
| }; |
| |
| user3 { |
| label = "green:user3"; |
| gpios = <&pm8916_gpios 0 0>; |
| }; |
| |
| user4 { |
| label = "green:user4"; |
| gpios = <&pm8916_gpios 1 0>; |
| }; |
| }; |
| }; |
| |
| #include "dragonboard410c-uboot.dtsi" |