| SoC overview |
| |
| 1. LS1043A |
| 2. LS1088A |
| 3. LS2080A |
| 4. LS1012A |
| 5. LS1046A |
| 6. LS2088A |
| 7. LS2081A |
| 8. LX2160A |
| 9. LS1028A |
| 10. LX2162A |
| |
| LS1043A |
| --------- |
| The LS1043A integrated multicore processor combines four ARM Cortex-A53 |
| processor cores with datapath acceleration optimized for L2/3 packet |
| processing, single pass security offload and robust traffic management |
| and quality of service. |
| |
| The LS1043A SoC includes the following function and features: |
| - Four 64-bit ARM Cortex-A53 CPUs |
| - 1 MB unified L2 Cache |
| - One 32-bit DDR3L/DDR4 SDRAM memory controllers with ECC and interleaving |
| support |
| - Data Path Acceleration Architecture (DPAA) incorporating acceleration the |
| the following functions: |
| - Packet parsing, classification, and distribution (FMan) |
| - Queue management for scheduling, packet sequencing, and congestion |
| management (QMan) |
| - Hardware buffer management for buffer allocation and de-allocation (BMan) |
| - Cryptography acceleration (SEC) |
| - Ethernet interfaces by FMan |
| - Up to 1 x XFI supporting 10G interface |
| - Up to 1 x QSGMII |
| - Up to 4 x SGMII supporting 1000Mbps |
| - Up to 2 x SGMII supporting 2500Mbps |
| - Up to 2 x RGMII supporting 1000Mbps |
| - High-speed peripheral interfaces |
| - Three PCIe 2.0 controllers, one supporting x4 operation |
| - One serial ATA (SATA 3.0) controllers |
| - Additional peripheral interfaces |
| - Three high-speed USB 3.0 controllers with integrated PHY |
| - Enhanced secure digital host controller (eSDXC/eMMC) |
| - Quad Serial Peripheral Interface (QSPI) Controller |
| - Serial peripheral interface (SPI) controller |
| - Four I2C controllers |
| - Two DUARTs |
| - Integrated flash controller supporting NAND and NOR flash |
| - QorIQ platform's trust architecture 2.1 |
| |
| LS1088A |
| -------- |
| The QorIQ LS1088A processor is built on the Layerscape |
| architecture combining eight ARM A53 processor cores |
| with advanced, high-performance datapath acceleration |
| and networks, peripheral interfaces required for |
| networking, wireless infrastructure, and general-purpose |
| embedded applications. |
| |
| LS1088A is compliant with the Layerscape Chassis Generation 3. |
| |
| Features summary: |
| - 8 32-bit / 64-bit ARM v8 Cortex-A53 CPUs |
| - Cores are in 2 cluster of 4-cores each |
| - 1MB L2 - Cache per cluster |
| - Cache coherent interconnect (CCI-400) |
| - 1 64-bit DDR4 SDRAM memory controller with ECC |
| - Data path acceleration architecture 2.0 (DPAA2) |
| - 4-Lane 10GHz SerDes comprising of WRIOP |
| - 4-Lane 10GHz SerDes comprising of PCI, SATA, uQE(TDM/HLDC/UART) |
| - Ethernet interfaces: SGMIIs, RGMIIs, QSGMIIs, XFIs |
| - QSPI, SPI, IFC2.0 supporting NAND, NOR flash |
| - 3 PCIe3.0 , 1 SATA3.0, 2 USB3.0, 1 SDXC, 2 DUARTs etc |
| - 2 DUARTs |
| - 4 I2C, GPIO |
| - Thermal monitor unit(TMU) |
| - 4 Flextimers and 1 generic timer |
| - Support for hardware virtualization and partitioning enforcement |
| - QorIQ platform's trust architecture 3.0 |
| - Service processor (SP) provides pre-boot initialization and secure-boot |
| capabilities |
| |
| LS2080A |
| -------- |
| The LS2080A integrated multicore processor combines eight ARM Cortex-A57 |
| processor cores with high-performance data path acceleration logic and network |
| and peripheral bus interfaces required for networking, telecom/datacom, |
| wireless infrastructure, and mil/aerospace applications. |
| |
| The LS2080A SoC includes the following function and features: |
| |
| - Eight 64-bit ARM Cortex-A57 CPUs |
| - 1 MB platform cache with ECC |
| - Two 64-bit DDR4 SDRAM memory controllers with ECC and interleaving support |
| - One secondary 32-bit DDR4 SDRAM memory controller, intended for use by |
| the AIOP |
| - Data path acceleration architecture (DPAA2) incorporating acceleration for |
| the following functions: |
| - Packet parsing, classification, and distribution (WRIOP) |
| - Queue and Hardware buffer management for scheduling, packet sequencing, and |
| congestion management, buffer allocation and de-allocation (QBMan) |
| - Cryptography acceleration (SEC) at up to 10 Gbps |
| - RegEx pattern matching acceleration (PME) at up to 10 Gbps |
| - Decompression/compression acceleration (DCE) at up to 20 Gbps |
| - Accelerated I/O processing (AIOP) at up to 20 Gbps |
| - QDMA engine |
| - 16 SerDes lanes at up to 10.3125 GHz |
| - Ethernet interfaces |
| - Up to eight 10 Gbps Ethernet MACs |
| - Up to eight 1 / 2.5 Gbps Ethernet MACs |
| - High-speed peripheral interfaces |
| - Four PCIe 3.0 controllers, one supporting SR-IOV |
| - Additional peripheral interfaces |
| - Two serial ATA (SATA 3.0) controllers |
| - Two high-speed USB 3.0 controllers with integrated PHY |
| - Enhanced secure digital host controller (eSDXC/eMMC) |
| - Serial peripheral interface (SPI) controller |
| - Quad Serial Peripheral Interface (QSPI) Controller |
| - Four I2C controllers |
| - Two DUARTs |
| - Integrated flash controller (IFC 2.0) supporting NAND and NOR flash |
| - Support for hardware virtualization and partitioning enforcement |
| - QorIQ platform's trust architecture 3.0 |
| - Service processor (SP) provides pre-boot initialization and secure-boot |
| capabilities |
| |
| LS1012A |
| -------- |
| The LS1012A features an advanced 64-bit ARM v8 Cortex- |
| A53 processor, with 32 KB of parity protected L1-I cache, |
| 32 KB of ECC protected L1-D cache, as well as 256 KB of |
| ECC protected L2 cache. |
| |
| The LS1012A SoC includes the following function and features: |
| - One 64-bit ARM v8 Cortex-A53 core with the following capabilities: |
| - ARM v8 cryptography extensions |
| - One 16-bit DDR3L SDRAM memory controller, Up to 1.0 GT/s, Supports |
| 16-/8-bit operation (no ECC support) |
| - ARM core-link CCI-400 cache coherent interconnect |
| - Packet Forwarding Engine (PFE) |
| - Cryptography acceleration (SEC) |
| - Ethernet interfaces supported by PFE: |
| - One Configurable x3 SerDes: |
| Two Serdes PLLs supported for usage by any SerDes data lane |
| Support for up to 6 GBaud operation |
| - High-speed peripheral interfaces: |
| - One PCI Express Gen2 controller, supporting x1 operation |
| - One serial ATA (SATA Gen 3.0) controller |
| - One USB 3.0/2.0 controller with integrated PHY |
| - One USB 2.0 controller with ULPI interface. . |
| - Additional peripheral interfaces: |
| - One quad serial peripheral interface (QuadSPI) controller |
| - One serial peripheral interface (SPI) controller |
| - Two enhanced secure digital host controllers |
| - Two I2C controllers |
| - One 16550 compliant DUART (two UART interfaces) |
| - Two general purpose IOs (GPIO) |
| - Two FlexTimers |
| - Five synchronous audio interfaces (SAI) |
| - Pre-boot loader (PBL) provides pre-boot initialization and RCW loading |
| - Single-source clocking solution enabling generation of core, platform, |
| DDR, SerDes, and USB clocks from a single external crystal and internal |
| crystaloscillator |
| - Thermal monitor unit (TMU) with +/- 3C accuracy |
| - Two WatchDog timers |
| - ARM generic timer |
| - QorIQ platform's trust architecture 2.1 |
| |
| LS1046A |
| -------- |
| The LS1046A integrated multicore processor combines four ARM Cortex-A72 |
| processor cores with datapath acceleration optimized for L2/3 packet |
| processing, single pass security offload and robust traffic management |
| and quality of service. |
| |
| The LS1046A SoC includes the following function and features: |
| - Four 64-bit ARM Cortex-A72 CPUs |
| - 2 MB unified L2 Cache |
| - One 64-bit DDR4 SDRAM memory controllers with ECC and interleaving |
| support |
| - Data Path Acceleration Architecture (DPAA) incorporating acceleration the |
| the following functions: |
| - Packet parsing, classification, and distribution (FMan) |
| - Queue management for scheduling, packet sequencing, and congestion |
| management (QMan) |
| - Hardware buffer management for buffer allocation and de-allocation (BMan) |
| - Cryptography acceleration (SEC) |
| - Two Configurable x4 SerDes |
| - Two PLLs per four-lane SerDes |
| - Support for 10G operation |
| - Ethernet interfaces by FMan |
| - Up to 2 x XFI supporting 10G interface (MAC 9, 10) |
| - Up to 1 x QSGMII (MAC 5, 6, 10, 1) |
| - Up to 4 x SGMII supporting 1000Mbps (MAC 5, 6, 9, 10) |
| - Up to 3 x SGMII supporting 2500Mbps (MAC 5, 9, 10) |
| - Up to 2 x RGMII supporting 1000Mbps (MAC 3, 4) |
| - High-speed peripheral interfaces |
| - Three PCIe 3.0 controllers, one supporting x4 operation |
| - One serial ATA (SATA 3.0) controllers |
| - Additional peripheral interfaces |
| - Three high-speed USB 3.0 controllers with integrated PHY |
| - Enhanced secure digital host controller (eSDXC/eMMC) |
| - Quad Serial Peripheral Interface (QSPI) Controller |
| - Serial peripheral interface (SPI) controller |
| - Four I2C controllers |
| - Two DUARTs |
| - Integrated flash controller (IFC) supporting NAND and NOR flash |
| - QorIQ platform's trust architecture 2.1 |
| |
| LS2088A |
| -------- |
| The LS2088A integrated multicore processor combines eight ARM Cortex-A72 |
| processor cores with high-performance data path acceleration logic and network |
| and peripheral bus interfaces required for networking, telecom/datacom, |
| wireless infrastructure, and mil/aerospace applications. |
| |
| The LS2088A SoC includes the following function and features: |
| |
| - Eight 64-bit ARM Cortex-A72 CPUs |
| - 1 MB platform cache with ECC |
| - Two 64-bit DDR4 SDRAM memory controllers with ECC and interleaving support |
| - One secondary 32-bit DDR4 SDRAM memory controller, intended for use by |
| the AIOP |
| - Data path acceleration architecture (DPAA2) incorporating acceleration for |
| the following functions: |
| - Packet parsing, classification, and distribution (WRIOP) |
| - Queue and Hardware buffer management for scheduling, packet sequencing, and |
| congestion management, buffer allocation and de-allocation (QBMan) |
| - Cryptography acceleration (SEC) at up to 10 Gbps |
| - RegEx pattern matching acceleration (PME) at up to 10 Gbps |
| - Decompression/compression acceleration (DCE) at up to 20 Gbps |
| - Accelerated I/O processing (AIOP) at up to 20 Gbps |
| - QDMA engine |
| - 16 SerDes lanes at up to 10.3125 GHz |
| - Ethernet interfaces |
| - Up to eight 10 Gbps Ethernet MACs |
| - Up to eight 1 / 2.5 Gbps Ethernet MACs |
| - High-speed peripheral interfaces |
| - Four PCIe 3.0 controllers, one supporting SR-IOV |
| - Additional peripheral interfaces |
| - Two serial ATA (SATA 3.0) controllers |
| - Two high-speed USB 3.0 controllers with integrated PHY |
| - Enhanced secure digital host controller (eSDXC/eMMC) |
| - Serial peripheral interface (SPI) controller |
| - Quad Serial Peripheral Interface (QSPI) Controller |
| - Four I2C controllers |
| - Two DUARTs |
| - Integrated flash controller (IFC 2.0) supporting NAND and NOR flash |
| - Support for hardware virtualization and partitioning enforcement |
| - QorIQ platform's trust architecture 3.0 |
| - Service processor (SP) provides pre-boot initialization and secure-boot |
| capabilities |
| |
| LS2088A SoC has 3 more similar SoC personalities |
| 1)LS2048A, few difference w.r.t. LS2088A: |
| a) Four 64-bit ARM v8 Cortex-A72 CPUs |
| |
| 2)LS2084A, few difference w.r.t. LS2088A: |
| a) No AIOP |
| b) No 32-bit DDR3 SDRAM memory |
| c) 5 * 1/10G + 5 *1G WRIOP |
| d) No L2 switch |
| |
| 3)LS2044A, few difference w.r.t. LS2084A: |
| a) Four 64-bit ARM v8 Cortex-A72 CPUs |
| |
| LS2081A |
| -------- |
| LS2081A is 40-pin derivative of LS2084A. |
| So feature-wise it is same as LS2084A. |
| Refer to LS2084A(LS2088A) section above for details. |
| |
| It has one more similar SoC personality |
| 1)LS2041A, few difference w.r.t. LS2081A: |
| a) Four 64-bit ARM v8 Cortex-A72 CPUs |
| |
| LX2160A |
| -------- |
| The QorIQ LX2160A processor is built in the 16FFC process on |
| the Layerscape architecture combining sixteen ARM A72 processor |
| cores with advanced, high-performance datapath acceleration and |
| network, peripheral interfaces required for networking, wireless |
| infrastructure, storage, and general-purpose embedded applications. |
| |
| LX2160A is compliant with the Layerscape Chassis Generation 3.2. |
| |
| The LX2160A SoC includes the following function and features: |
| Sixteen 32-bit / 64-bit ARM v8 A72 CPUs |
| Cache Coherent Interconnect Fabric (CCN508 aka “Eliot”) |
| Two 64-bit 3.2GT/s DDR4 SDRAM memory controllers with ECC. |
| Data path acceleration architecture (DPAA2) |
| 24 Serdes lanes at up to 25 GHz |
| Ethernet interfaces |
| Single WRIOP tile supporting 130Gbps using 18 MACs |
| Support for 10G-SXGMII (aka USXGMII). |
| Support for SGMII (and 1000Base-KX) |
| Support for XFI (and 10GBase-KR) |
| Support for CAUI4 (100G); CAUI2 (50G) and 25G-AUI(25G). |
| Support for XLAUI (and 40GBase-KR4) for 40G. |
| Support for two RGMII parallel interfaces. |
| Energy efficient Ethernet support (802.3az) |
| IEEE 1588 support. |
| High-speed peripheral interfaces |
| Two PCIe Gen 4.0 8-lane controllers supporting SR-IOV, |
| Four PCIe Gen 4.0 4-lane controllers. |
| Four serial ATA (SATA 3.0) controllers. |
| Two USB 3.0 controllers with integrated PHY |
| Two Enhanced secure digital host controllers |
| Two Controller Area Network (CAN) modules |
| Flexible Serial peripheral interface (FlexSPI) controller. |
| Three Serial peripheral interface (SPI) controllers. |
| Eight I2C Controllers. |
| Four PL011 UARTs supporting two 4-pin UART ports or four 2-pin UART ports. |
| General Purpose IO (GPIO) |
| Support for hardware virtualization and partitioning (ARM MMU-500) |
| Support for GIC (ARM GIC-500) |
| QorIQ platform Trust Architecture 3.0 |
| One Secure WatchDog timer and one Non-Secure Watchdog timer. |
| ARM Generic Timer |
| Two Flextimers |
| Debug supporting run control, data acquisition, high-speed trace, |
| performance/event monitoring |
| Thermal Monitor Unit (TMU) with +/- 2C accuracy |
| Support for Voltage ID (VID) for yield improvement |
| |
| LX2160A SoC has 2 more similar SoC personalities |
| 1)LX2120A, few difference w.r.t. LX2160A: |
| a) Twelve 64-bit ARM v8 Cortex-A72 CPUs |
| |
| 2)LX2080A, few difference w.r.t. LX2160A: |
| a) Eight 64-bit ARM v8 Cortex-A72 CPUs |
| |
| |
| LS1028A |
| -------- |
| The QorIQ LS1028A processor integrates two 64-bit Arm Cortex-A72 cores with |
| a GPU and LCD controller, as well as two TSN-enabled Ethernet controllers and |
| a TSNenabled 4-port switch. |
| |
| The high performance Cortex-A72 cores, performing above 16,000 CoreMarks, |
| combined with 2.5 Gbit Ethernet, PCI express Gen 3.0, SATA 3.0, USB 3.0 and |
| Octal/Quad SPI interfaces provide capabilities for a number of industrial and |
| embedded applications. The device provides excellent integration with the |
| new Time-Sensitive Networking standard, and enables a number of |
| TSN applications. |
| |
| The LS1028A SoC includes the following function and features: |
| - Two 64-bit ARM v8 A72 CPUs |
| - Cache Coherent interconnect (CCI-400) |
| - One 32-bit DDR3L/DDR4 SDRAM memory controller with ECC |
| - eDP/Displayport interface |
| - Graphics processing unit |
| - One Configurable x4 SerDes |
| - Ethernet interfaces |
| - Non-switched: One Ethernet MAC supporting 2.5G, 1G, 100M, 10M, one |
| ethernet MAC supporting 1G, 100M, 10M. |
| - Switched: TSN IP to support four 2.5/1G interfaces. |
| - None of the MACs support MACSEC |
| - Support for RGMII, SGMII (and 1000Base-KX), SGMII 2.5x, QSGMII |
| - Support for 10G-SXGMII and 10G-QXGMII. |
| - Energy efficient Ethernet support (802.3az) |
| - IEEE 1588 support |
| - High-speed peripheral interfaces |
| - Two PCIe 3.0 controllers, one supporting x4 operation |
| - One serial ATA (SATA 3.0) controller |
| - Additional peripheral interfaces |
| - Two high-speed USB 2.0/3.0 controllers with integrated PHY each |
| supporting host or device modes |
| - Two Enhanced secure digital host controllers (SD/SDIO/eMMC) |
| - Two Serial peripheral interface (SPI) controllers |
| - Eight I2C controllers |
| - Two UART controllers |
| - Additional six Industrual UARTs (LPUART). |
| - One FlexSPI controller |
| - General Purpose IO (GPIO) |
| - Two CAN-FD interfaces |
| - Eight Flextimers with PWM I/O |
| - Support for hardware virtualization and partitioning enforcement |
| - Layerscape Trust Architecture |
| - Service Processor (SP) provides pre-boot initialization and secure-boot |
| capabilities |
| |
| LX2162A |
| -------- |
| The QorIQ LX2162A processor is built on the Layerscape architecture |
| combining sixteen ARM A72 processor cores with advanced, high-performance |
| datapath acceleration and network, peripheral interfaces required for |
| networking, wireless infrastructure, storage, and general-purpose embedded |
| applications. |
| |
| LX2162A is compliant with the Layerscape Chassis Generation 3.2. |
| |
| The LX2162A SoC includes the following function and features: |
| Sixteen 32-bit / 64-bit ARM v8 A72 CPUs |
| Cache Coherent Interconnect Fabric (CCN508) |
| One 64-bit 2.9GT/s DDR4 SDRAM memory controllers with ECC. |
| Data path acceleration architecture (DPAA2) |
| 12 Serdes lanes at up to 25 GHz |
| Ethernet interfaces |
| Support for 10G-SXGMII (aka USXGMII). |
| Support for SGMII (and 1000Base-KX) |
| Support for XFI (and 10GBase-KR) |
| Support for CAUI2 (50G) and 25G-AUI(25G). |
| Support for XLAUI (and 40GBase-KR4) for 40G. |
| Support for two RGMII parallel interfaces. |
| Energy efficient Ethernet support (802.3az) |
| IEEE 1588 support. |
| High-speed peripheral interfaces |
| One PCIe Gen 3.0 8-lane controllers supporting SR-IOV, |
| Two PCIe Gen 3.0 4-lane controllers. |
| Four serial ATA (SATA 3.0) controllers. |
| One USB 3.0 controllers with integrated PHY |
| Two Enhanced secure digital host controllers |
| Two Controller Area Network (CAN) modules |
| Flexible Serial peripheral interface (FlexSPI) controller. |
| Three Serial peripheral interface (SPI) controllers. |
| Eight I2C Controllers. |
| Four PL011 UARTs supporting two 4-pin UART ports or four 2-pin UART ports. |
| General Purpose IO (GPIO) |
| Support for hardware virtualization and partitioning (ARM MMU-500) |
| Support for GIC (ARM GIC-500) |
| QorIQ platform Trust Architecture 3.0 |
| One Secure WatchDog timer and one Non-Secure Watchdog timer. |
| ARM Generic Timer |
| Two Flextimers |
| Debug supporting run control, data acquisition, high-speed trace, |
| performance/event monitoring |
| Thermal Monitor Unit (TMU) with +/- 2C accuracy |
| Support for Voltage ID (VID) for yield improvement |
| |
| LX2162A SoC has 2 more similar SoC personalities |
| 1)LX2122A, few difference w.r.t. LX2162A: |
| a) Twelve 64-bit ARM v8 Cortex-A72 CPUs |
| |
| 2)LX2082A, few difference w.r.t. LX2162A: |
| a) Eight 64-bit ARM v8 Cortex-A72 CPUs |