blob: 509730aea96534a08d3aedc2ac3971e12bd578b0 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2014 Google Inc.
* Copyright (c) 2016 Google, Inc
* Copyright (C) 2015-2018 Intel Corporation.
* Copyright (C) 2018 Siemens AG
* Some code taken from coreboot cpulib.c
*/
#include <common.h>
#include <cpu.h>
#include <dm.h>
#include <errno.h>
#include <log.h>
#include <asm/cpu.h>
#include <asm/cpu_common.h>
#include <asm/intel_regs.h>
#include <asm/lapic.h>
#include <asm/lpc_common.h>
#include <asm/msr.h>
#include <asm/mtrr.h>
#include <asm/post.h>
#include <asm/microcode.h>
DECLARE_GLOBAL_DATA_PTR;
static int report_bist_failure(void)
{
if (gd->arch.bist != 0) {
post_code(POST_BIST_FAILURE);
printf("BIST failed: %08x\n", gd->arch.bist);
return -EFAULT;
}
return 0;
}
int cpu_common_init(void)
{
struct udevice *dev, *lpc;
int ret;
/* Halt if there was a built in self test failure */
ret = report_bist_failure();
if (ret)
return ret;
enable_lapic();
ret = microcode_update_intel();
if (ret && ret != -EEXIST) {
debug("%s: Microcode update failure (err=%d)\n", __func__, ret);
return ret;
}
/* Enable upper 128bytes of CMOS */
writel(1 << 2, RCB_REG(RC));
/* Early chipset init required before RAM init can work */
uclass_first_device(UCLASS_NORTHBRIDGE, &dev);
ret = uclass_first_device(UCLASS_LPC, &lpc);
if (ret)
return ret;
if (!lpc)
return -ENODEV;
/* Cause the SATA device to do its early init */
uclass_first_device(UCLASS_AHCI, &dev);
return 0;
}
int cpu_set_flex_ratio_to_tdp_nominal(void)
{
msr_t flex_ratio, msr;
u8 nominal_ratio;
/* Check for Flex Ratio support */
flex_ratio = msr_read(MSR_FLEX_RATIO);
if (!(flex_ratio.lo & FLEX_RATIO_EN))
return -EINVAL;
/* Check for >0 configurable TDPs */
msr = msr_read(MSR_PLATFORM_INFO);
if (((msr.hi >> 1) & 3) == 0)
return -EINVAL;
/* Use nominal TDP ratio for flex ratio */
msr = msr_read(MSR_CONFIG_TDP_NOMINAL);
nominal_ratio = msr.lo & 0xff;
/* See if flex ratio is already set to nominal TDP ratio */
if (((flex_ratio.lo >> 8) & 0xff) == nominal_ratio)
return 0;
/* Set flex ratio to nominal TDP ratio */
flex_ratio.lo &= ~0xff00;
flex_ratio.lo |= nominal_ratio << 8;
flex_ratio.lo |= FLEX_RATIO_LOCK;
msr_write(MSR_FLEX_RATIO, flex_ratio);
/* Set flex ratio in soft reset data register bits 11:6 */
clrsetbits_le32(RCB_REG(SOFT_RESET_DATA), 0x3f << 6,
(nominal_ratio & 0x3f) << 6);
debug("CPU: Soft reset to set up flex ratio\n");
/* Set soft reset control to use register value */
setbits_le32(RCB_REG(SOFT_RESET_CTRL), 1);
/* Issue warm reset, will be "CPU only" due to soft reset data */
outb(0x0, IO_PORT_RESET);
outb(SYS_RST | RST_CPU, IO_PORT_RESET);
cpu_hlt();
/* Not reached */
return -EINVAL;
}
int cpu_intel_get_info(struct cpu_info *info, int bclk)
{
msr_t msr;
msr = msr_read(MSR_IA32_PERF_CTL);
info->cpu_freq = ((msr.lo >> 8) & 0xff) * bclk * 1000000;
info->features = 1 << CPU_FEAT_L1_CACHE | 1 << CPU_FEAT_MMU |
1 << CPU_FEAT_UCODE | 1 << CPU_FEAT_DEVICE_ID;
return 0;
}
int cpu_configure_thermal_target(struct udevice *dev)
{
u32 tcc_offset;
msr_t msr;
int ret;
ret = dev_read_u32(dev, "tcc-offset", &tcc_offset);
if (!ret)
return -ENOENT;
/* Set TCC activaiton offset if supported */
msr = msr_read(MSR_PLATFORM_INFO);
if (msr.lo & (1 << 30)) {
msr = msr_read(MSR_TEMPERATURE_TARGET);
msr.lo &= ~(0xf << 24); /* Bits 27:24 */
msr.lo |= (tcc_offset & 0xf) << 24;
msr_write(MSR_TEMPERATURE_TARGET, msr);
}
return 0;
}
void cpu_set_perf_control(uint clk_ratio)
{
msr_t perf_ctl;
perf_ctl.lo = (clk_ratio & 0xff) << 8;
perf_ctl.hi = 0;
msr_write(MSR_IA32_PERF_CTL, perf_ctl);
debug("CPU: frequency set to %d MHz\n", clk_ratio * INTEL_BCLK_MHZ);
}
bool cpu_config_tdp_levels(void)
{
msr_t platform_info;
/* Bits 34:33 indicate how many levels supported */
platform_info = msr_read(MSR_PLATFORM_INFO);
return ((platform_info.hi >> 1) & 3) != 0;
}
void cpu_set_p_state_to_turbo_ratio(void)
{
msr_t msr;
msr = msr_read(MSR_TURBO_RATIO_LIMIT);
cpu_set_perf_control(msr.lo);
}
enum burst_mode_t cpu_get_burst_mode_state(void)
{
enum burst_mode_t state;
int burst_en, burst_cap;
msr_t msr;
uint eax;
eax = cpuid_eax(0x6);
burst_cap = eax & 0x2;
msr = msr_read(MSR_IA32_MISC_ENABLE);
burst_en = !(msr.hi & BURST_MODE_DISABLE);
if (!burst_cap && burst_en)
state = BURST_MODE_UNAVAILABLE;
else if (burst_cap && !burst_en)
state = BURST_MODE_DISABLED;
else if (burst_cap && burst_en)
state = BURST_MODE_ENABLED;
else
state = BURST_MODE_UNKNOWN;
return state;
}
void cpu_set_burst_mode(bool burst_mode)
{
msr_t msr;
msr = msr_read(MSR_IA32_MISC_ENABLE);
if (burst_mode)
msr.hi &= ~BURST_MODE_DISABLE;
else
msr.hi |= BURST_MODE_DISABLE;
msr_write(MSR_IA32_MISC_ENABLE, msr);
}
void cpu_set_eist(bool eist_status)
{
msr_t msr;
msr = msr_read(MSR_IA32_MISC_ENABLE);
if (eist_status)
msr.lo |= MISC_ENABLE_ENHANCED_SPEEDSTEP;
else
msr.lo &= ~MISC_ENABLE_ENHANCED_SPEEDSTEP;
msr_write(MSR_IA32_MISC_ENABLE, msr);
}