| config CMD_STBOARD |
| bool "stboard - command for OTP board information" |
| depends on ARCH_STM32MP |
| default y if TARGET_ST_STM32MP15x |
| help |
| This compile the stboard command to |
| read and write the board in the OTP. |
| |
| config MTDPARTS_NAND0_BOOT |
| string "mtd boot partitions for nand0" |
| default "2m(fsbl),2m(ssbl1),2m(ssbl2)" |
| depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP |
| help |
| This define the partitions of nand0 used to build mtparts dynamically |
| for boot from nand0. |
| Each partition need to be aligned with the device erase block size, |
| 512KB is the max size for the NAND supported by stm32mp1 platform. |
| |
| config MTDPARTS_NAND0_TEE |
| string "mtd tee partitions for nand0" |
| default "512k(teeh),512k(teed),512k(teex)" |
| depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP |
| help |
| This define the tee partitions added in mtparts dynamically |
| when tee is supported with boot from nand0. |
| Each partition need to be aligned with the device erase block size, |
| 512KB is the max size for the NAND supported by stm32mp1 platform. |
| |
| config MTDPARTS_NOR0_BOOT |
| string "mtd boot partitions for nor0" |
| default "256k(fsbl1),256k(fsbl2),2m(ssbl),512k(u-boot-env)" |
| depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP |
| help |
| This define the partitions of nand0 used to build mtparts dynamically |
| for boot from nor0. |
| Each partition need to be aligned with the device erase block size, |
| with 256KB we support all the NOR. |
| U-Boot env partition (512kB) use 2 erase block for redundancy. |
| |
| config MTDPARTS_NOR0_TEE |
| string "mtd tee partitions for nor0" |
| default "256k(teeh),512k(teed),256k(teex)" |
| depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP |
| help |
| This define the tee partitions added in mtparts dynamically |
| when tee is supported with boot from nor0. |
| |
| config MTDPARTS_SPINAND0_BOOT |
| string "mtd boot partitions for spi-nand0" |
| default "2m(fsbl),2m(ssbl1),2m(ssbl2)" |
| depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP |
| help |
| This define the partitions of nand0 used to build mtparts dynamically |
| for boot from spi-nand0, |
| 512KB is the max size for the NAND supported by stm32mp1 platform. |
| |
| config MTDPARTS_SPINAND0_TEE |
| string "mtd tee partitions for spi-nand0" |
| default "512k(teeh),512k(teed),512k(teex)" |
| depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP |
| help |
| This define the tee partitions added in mtparts dynamically |
| when tee is supported with boot from spi-nand0, |
| 512KB is the max size for the NAND supported by stm32mp1 platform. |
| |
| config DFU_ALT_RAM0 |
| string "dfu for ram0" |
| default "uImage ram 0xc2000000 0x2000000;devicetree.dtb ram 0xc4000000 0x100000;uramdisk.image.gz ram 0xc4400000 0x10000000" |
| depends on ARCH_STM32MP && SET_DFU_ALT_INFO |
| help |
| This defines the partitions of ram used to build dfu dynamically. |
| |
| config TYPEC_STUSB160X |
| tristate "STMicroelectronics STUSB160X Type-C controller driver" |
| depends on DM_I2C |
| help |
| Say Y if your system has STMicroelectronics STUSB160X Type-C port |
| controller. |