arch/arm/mach-socfpga/include/mach/mailbox_s10.h - filogic/uboot - Gitiles

 /* SPDX-License-Identifier: GPL-2.0
  *
  * Copyright (C) 2017-2018 Intel Corporation <www.intel.com>
  *
  */

 #ifndef _MAILBOX_S10_H_
 #define _MAILBOX_S10_H_

 /* user define Uboot ID */
 #include <linux/bitops.h>
 #define MBOX_CLIENT_ID_UBOOT	0xB
 #define MBOX_ID_UBOOT		0x1

 #define MBOX_CMD_DIRECT	0
 #define MBOX_CMD_INDIRECT	1

 #define MBOX_MAX_CMD_INDEX	2047
 #define MBOX_CMD_BUFFER_SIZE	32
 #define MBOX_RESP_BUFFER_SIZE	16

 #define MBOX_HDR_CMD_LSB	0
 #define MBOX_HDR_CMD_MSK	(BIT(11) - 1)
 #define MBOX_HDR_I_LSB		11
 #define MBOX_HDR_I_MSK		BIT(11)
 #define MBOX_HDR_LEN_LSB	12
 #define MBOX_HDR_LEN_MSK	0x007FF000
 #define MBOX_HDR_ID_LSB		24
 #define MBOX_HDR_ID_MSK		0x0F000000
 #define MBOX_HDR_CLIENT_LSB	28
 #define MBOX_HDR_CLIENT_MSK	0xF0000000

 /* Interrupt flags */
 #define MBOX_FLAGS_INT_COE	BIT(0)	/* COUT update interrupt enable */
 #define MBOX_FLAGS_INT_RIE	BIT(1)	/* RIN update interrupt enable */
 #define MBOX_FLAGS_INT_UAE	BIT(8)	/* Urgent ACK interrupt enable */
 #define MBOX_ALL_INTRS		(MBOX_FLAGS_INT_COE | \
 				 MBOX_FLAGS_INT_RIE | \
 				 MBOX_FLAGS_INT_UAE)

 /* Status */
 #define MBOX_STATUS_UA_MSK	BIT(8)

 #define MBOX_CMD_HEADER(client, id, len, indirect, cmd)     \
 	((((cmd) << MBOX_HDR_CMD_LSB) & MBOX_HDR_CMD_MSK) | \
 	(((indirect) << MBOX_HDR_I_LSB) & MBOX_HDR_I_MSK) | \
 	(((len) << MBOX_HDR_LEN_LSB) & MBOX_HDR_LEN_MSK)  | \
 	(((id) << MBOX_HDR_ID_LSB) & MBOX_HDR_ID_MSK)     | \
 	(((client) << MBOX_HDR_CLIENT_LSB) & MBOX_HDR_CLIENT_MSK))

 #define MBOX_RESP_ERR_GET(resp)				\
 	(((resp) & MBOX_HDR_CMD_MSK) >> MBOX_HDR_CMD_LSB)
 #define MBOX_RESP_LEN_GET(resp)			\
 	(((resp) & MBOX_HDR_LEN_MSK) >> MBOX_HDR_LEN_LSB)
 #define MBOX_RESP_ID_GET(resp)				\
 	(((resp) & MBOX_HDR_ID_MSK) >> MBOX_HDR_ID_LSB)
 #define MBOX_RESP_CLIENT_GET(resp)			\
 	(((resp) & MBOX_HDR_CLIENT_MSK) >> MBOX_HDR_CLIENT_LSB)

 /* Response error list */
 enum ALT_SDM_MBOX_RESP_CODE {
 	/* CMD completed successfully, but check resp ARGS for any errors */
 	MBOX_RESP_STATOK = 0,
 	/* CMD is incorrectly formatted in some way */
 	MBOX_RESP_INVALID_COMMAND = 1,
 	/* BootROM Command code not undesrtood */
 	MBOX_RESP_UNKNOWN_BR = 2,
 	/* CMD code not recognized by firmware */
 	MBOX_RESP_UNKNOWN = 3,
 	/* Length setting is not a valid length for this CMD type */
 	MBOX_RESP_INVALID_LEN = 4,
 	/* Indirect setting is not valid for this CMD type */
 	MBOX_RESP_INVALID_INDIRECT_SETTING = 5,
 	/* HW source which is not allowed to send CMD type */
 	MBOX_RESP_CMD_INVALID_ON_SRC = 6,
 	/* Client with ID not associated with any running PR CMD tries to run
 	 * RECONFIG_DATA RECONFIG_STATUS and accessing QSPI / SDMMC using ID
 	 * without exclusive access
 	 */
 	MBOX_RESP_CLIENT_ID_NO_MATCH = 8,
 	/* Address provided to the system is invalid (alignment, range
 	 * permission)
 	 */
 	MBOX_RESP_INVALID_ADDR = 0x9,
 	/* Signature authentication failed */
 	MBOX_RESP_AUTH_FAIL = 0xA,
 	/* CMD timed out */
 	MBOX_RESP_TIMEOUT = 0xB,
 	/* HW (i.e. QSPI) is not ready (initialized or configured) */
 	MBOX_RESP_HW_NOT_RDY = 0xC,
 	/* Invalid license for IID registration */
 	MBOX_RESP_PUF_ACCCES_FAILED = 0x80,
 	MBOX_PUF_ENROLL_DISABLE = 0x81,
 	MBOX_RESP_PUF_ENROLL_FAIL = 0x82,
 	MBOX_RESP_PUF_RAM_TEST_FAIL = 0x83,
 	MBOX_RESP_ATTEST_CERT_GEN_FAIL = 0x84,
 	/* Operation not allowed under current security settings */
 	MBOX_RESP_NOT_ALLOWED_UNDER_SECURITY_SETTINGS = 0x85,
 	MBOX_RESP_PUF_TRNG_FAIL = 0x86,
 	MBOX_RESP_FUSE_ALREADY_BLOWN = 0x87,
 	MBOX_RESP_INVALID_SIGNATURE = 0x88,
 	MBOX_RESP_INVALID_HASH = 0x8b,
 	MBOX_RESP_INVALID_CERTIFICATE = 0x91,
 	/* Indicates that the device (FPGA or HPS) is not configured */
 	MBOX_RESP_NOT_CONFIGURED = 0x100,
 	/* Indicates that the device is busy */
 	MBOX_RESP_DEVICE_BUSY = 0x1FF,
 	/* Indicates that there is no valid response available */
 	MBOX_RESP_NO_VALID_RESP_AVAILABLE = 0x2FF,
 	/* General Error */
 	MBOX_RESP_ERROR = 0x3FF,
 };

 /* Mailbox command list */
 #define MBOX_RESTART		2
 #define MBOX_CONFIG_STATUS	4
 #define MBOX_RECONFIG		6
 #define MBOX_RECONFIG_MSEL	7
 #define MBOX_RECONFIG_DATA	8
 #define MBOX_RECONFIG_STATUS	9
 #define MBOX_VAB_SRC_CERT		11
 #define MBOX_QSPI_OPEN		50
 #define MBOX_QSPI_CLOSE		51
 #define MBOX_QSPI_DIRECT	59
 #define MBOX_REBOOT_HPS		71

 /* Mailbox registers */
 #define MBOX_CIN			0	/* command valid offset */
 #define MBOX_ROUT			4	/* response output offset */
 #define MBOX_URG			8	/* urgent command */
 #define MBOX_FLAGS			0x0c	/* interrupt enables */
 #define MBOX_COUT			0x20	/* command free offset */
 #define MBOX_RIN			0x24	/* respond valid offset */
 #define MBOX_STATUS			0x2c	/* mailbox status */
 #define MBOX_CMD_BUF			0x40	/* circular command buffer */
 #define MBOX_RESP_BUF			0xc0	/* circular response buffer */
 #define MBOX_DOORBELL_TO_SDM		0x400	/* Doorbell to SDM */
 #define MBOX_DOORBELL_FROM_SDM		0x480	/* Doorbell from SDM */

 /* Status and bit information returned by RECONFIG_STATUS */
 #define RECONFIG_STATUS_RESPONSE_LEN			6
 #define RECONFIG_STATUS_STATE				0
 #define RECONFIG_STATUS_PIN_STATUS			2
 #define RECONFIG_STATUS_SOFTFUNC_STATUS			3

 /* Macros for specifying number of arguments in mailbox command */
 #define MBOX_NUM_ARGS(n, b)				(((n) & 0xFF) << (b))
 #define MBOX_DIRECT_COUNT(n)				MBOX_NUM_ARGS((n), 0)
 #define MBOX_ARG_DESC_COUNT(n)				MBOX_NUM_ARGS((n), 8)
 #define MBOX_RESP_DESC_COUNT(n)				MBOX_NUM_ARGS((n), 16)

 #define MBOX_CFGSTAT_STATE_IDLE				0x00000000
 #define MBOX_CFGSTAT_STATE_CONFIG			0x10000000
 #define MBOX_CFGSTAT_STATE_FAILACK			0x08000000
 #define MBOX_CFGSTAT_STATE_ERROR_INVALID		0xf0000001
 #define MBOX_CFGSTAT_STATE_ERROR_CORRUPT		0xf0000002
 #define MBOX_CFGSTAT_STATE_ERROR_AUTH			0xf0000003
 #define MBOX_CFGSTAT_STATE_ERROR_CORE_IO		0xf0000004
 #define MBOX_CFGSTAT_STATE_ERROR_HARDWARE		0xf0000005
 #define MBOX_CFGSTAT_STATE_ERROR_FAKE			0xf0000006
 #define MBOX_CFGSTAT_STATE_ERROR_BOOT_INFO		0xf0000007
 #define MBOX_CFGSTAT_STATE_ERROR_QSPI_ERROR		0xf0000008

 #define RCF_SOFTFUNC_STATUS_CONF_DONE			BIT(0)
 #define RCF_SOFTFUNC_STATUS_INIT_DONE			BIT(1)
 #define RCF_SOFTFUNC_STATUS_SEU_ERROR			BIT(3)
 #define RCF_PIN_STATUS_NSTATUS				BIT(31)

 int mbox_send_cmd(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg, u8 urgent,
 		  u32 *resp_buf_len, u32 *resp_buf);
 int mbox_send_cmd_psci(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg,
 		       u8 urgent, u32 *resp_buf_len, u32 *resp_buf);
 int mbox_send_cmd_only(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg);
 int mbox_send_cmd_only_psci(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg);
 int mbox_rcv_resp(u32 *resp_buf, u32 resp_buf_max_len);
 int mbox_rcv_resp_psci(u32 *resp_buf, u32 resp_buf_max_len);
 int mbox_init(void);

 #ifdef CONFIG_CADENCE_QSPI
 int mbox_qspi_close(void);
 int mbox_qspi_open(void);
 #endif

 int mbox_reset_cold(void);
 int mbox_get_fpga_config_status(u32 cmd);
 int mbox_get_fpga_config_status_psci(u32 cmd);
 #endif /* _MAILBOX_S10_H_ */
	/* SPDX-License-Identifier: GPL-2.0
	*
	* Copyright (C) 2017-2018 Intel Corporation <www.intel.com>
	*
	*/

	#ifndef _MAILBOX_S10_H_
	#define _MAILBOX_S10_H_

	/* user define Uboot ID */
	#include <linux/bitops.h>
	#define MBOX_CLIENT_ID_UBOOT 0xB
	#define MBOX_ID_UBOOT 0x1

	#define MBOX_CMD_DIRECT 0
	#define MBOX_CMD_INDIRECT 1

	#define MBOX_MAX_CMD_INDEX 2047
	#define MBOX_CMD_BUFFER_SIZE 32
	#define MBOX_RESP_BUFFER_SIZE 16

	#define MBOX_HDR_CMD_LSB 0
	#define MBOX_HDR_CMD_MSK (BIT(11) - 1)
	#define MBOX_HDR_I_LSB 11
	#define MBOX_HDR_I_MSK BIT(11)
	#define MBOX_HDR_LEN_LSB 12
	#define MBOX_HDR_LEN_MSK 0x007FF000
	#define MBOX_HDR_ID_LSB 24
	#define MBOX_HDR_ID_MSK 0x0F000000
	#define MBOX_HDR_CLIENT_LSB 28
	#define MBOX_HDR_CLIENT_MSK 0xF0000000

	/* Interrupt flags */
	#define MBOX_FLAGS_INT_COE BIT(0) /* COUT update interrupt enable */
	#define MBOX_FLAGS_INT_RIE BIT(1) /* RIN update interrupt enable */
	#define MBOX_FLAGS_INT_UAE BIT(8) /* Urgent ACK interrupt enable */
	#define MBOX_ALL_INTRS (MBOX_FLAGS_INT_COE \| \
	MBOX_FLAGS_INT_RIE \| \
	MBOX_FLAGS_INT_UAE)

	/* Status */
	#define MBOX_STATUS_UA_MSK BIT(8)

	#define MBOX_CMD_HEADER(client, id, len, indirect, cmd) \
	((((cmd) << MBOX_HDR_CMD_LSB) & MBOX_HDR_CMD_MSK) \| \
	(((indirect) << MBOX_HDR_I_LSB) & MBOX_HDR_I_MSK) \| \
	(((len) << MBOX_HDR_LEN_LSB) & MBOX_HDR_LEN_MSK) \| \
	(((id) << MBOX_HDR_ID_LSB) & MBOX_HDR_ID_MSK) \| \
	(((client) << MBOX_HDR_CLIENT_LSB) & MBOX_HDR_CLIENT_MSK))

	#define MBOX_RESP_ERR_GET(resp) \
	(((resp) & MBOX_HDR_CMD_MSK) >> MBOX_HDR_CMD_LSB)
	#define MBOX_RESP_LEN_GET(resp) \
	(((resp) & MBOX_HDR_LEN_MSK) >> MBOX_HDR_LEN_LSB)
	#define MBOX_RESP_ID_GET(resp) \
	(((resp) & MBOX_HDR_ID_MSK) >> MBOX_HDR_ID_LSB)
	#define MBOX_RESP_CLIENT_GET(resp) \
	(((resp) & MBOX_HDR_CLIENT_MSK) >> MBOX_HDR_CLIENT_LSB)

	/* Response error list */
	enum ALT_SDM_MBOX_RESP_CODE {
	/* CMD completed successfully, but check resp ARGS for any errors */
	MBOX_RESP_STATOK = 0,
	/* CMD is incorrectly formatted in some way */
	MBOX_RESP_INVALID_COMMAND = 1,
	/* BootROM Command code not undesrtood */
	MBOX_RESP_UNKNOWN_BR = 2,
	/* CMD code not recognized by firmware */
	MBOX_RESP_UNKNOWN = 3,
	/* Length setting is not a valid length for this CMD type */
	MBOX_RESP_INVALID_LEN = 4,
	/* Indirect setting is not valid for this CMD type */
	MBOX_RESP_INVALID_INDIRECT_SETTING = 5,
	/* HW source which is not allowed to send CMD type */
	MBOX_RESP_CMD_INVALID_ON_SRC = 6,
	/* Client with ID not associated with any running PR CMD tries to run
	* RECONFIG_DATA RECONFIG_STATUS and accessing QSPI / SDMMC using ID
	* without exclusive access
	*/
	MBOX_RESP_CLIENT_ID_NO_MATCH = 8,
	/* Address provided to the system is invalid (alignment, range
	* permission)
	*/
	MBOX_RESP_INVALID_ADDR = 0x9,
	/* Signature authentication failed */
	MBOX_RESP_AUTH_FAIL = 0xA,
	/* CMD timed out */
	MBOX_RESP_TIMEOUT = 0xB,
	/* HW (i.e. QSPI) is not ready (initialized or configured) */
	MBOX_RESP_HW_NOT_RDY = 0xC,
	/* Invalid license for IID registration */
	MBOX_RESP_PUF_ACCCES_FAILED = 0x80,
	MBOX_PUF_ENROLL_DISABLE = 0x81,
	MBOX_RESP_PUF_ENROLL_FAIL = 0x82,
	MBOX_RESP_PUF_RAM_TEST_FAIL = 0x83,
	MBOX_RESP_ATTEST_CERT_GEN_FAIL = 0x84,
	/* Operation not allowed under current security settings */
	MBOX_RESP_NOT_ALLOWED_UNDER_SECURITY_SETTINGS = 0x85,
	MBOX_RESP_PUF_TRNG_FAIL = 0x86,
	MBOX_RESP_FUSE_ALREADY_BLOWN = 0x87,
	MBOX_RESP_INVALID_SIGNATURE = 0x88,
	MBOX_RESP_INVALID_HASH = 0x8b,
	MBOX_RESP_INVALID_CERTIFICATE = 0x91,
	/* Indicates that the device (FPGA or HPS) is not configured */
	MBOX_RESP_NOT_CONFIGURED = 0x100,
	/* Indicates that the device is busy */
	MBOX_RESP_DEVICE_BUSY = 0x1FF,
	/* Indicates that there is no valid response available */
	MBOX_RESP_NO_VALID_RESP_AVAILABLE = 0x2FF,
	/* General Error */
	MBOX_RESP_ERROR = 0x3FF,
	};

	/* Mailbox command list */
	#define MBOX_RESTART 2
	#define MBOX_CONFIG_STATUS 4
	#define MBOX_RECONFIG 6
	#define MBOX_RECONFIG_MSEL 7
	#define MBOX_RECONFIG_DATA 8
	#define MBOX_RECONFIG_STATUS 9
	#define MBOX_VAB_SRC_CERT 11
	#define MBOX_QSPI_OPEN 50
	#define MBOX_QSPI_CLOSE 51
	#define MBOX_QSPI_DIRECT 59
	#define MBOX_REBOOT_HPS 71

	/* Mailbox registers */
	#define MBOX_CIN 0 /* command valid offset */
	#define MBOX_ROUT 4 /* response output offset */
	#define MBOX_URG 8 /* urgent command */
	#define MBOX_FLAGS 0x0c /* interrupt enables */
	#define MBOX_COUT 0x20 /* command free offset */
	#define MBOX_RIN 0x24 /* respond valid offset */
	#define MBOX_STATUS 0x2c /* mailbox status */
	#define MBOX_CMD_BUF 0x40 /* circular command buffer */
	#define MBOX_RESP_BUF 0xc0 /* circular response buffer */
	#define MBOX_DOORBELL_TO_SDM 0x400 /* Doorbell to SDM */
	#define MBOX_DOORBELL_FROM_SDM 0x480 /* Doorbell from SDM */

	/* Status and bit information returned by RECONFIG_STATUS */
	#define RECONFIG_STATUS_RESPONSE_LEN 6
	#define RECONFIG_STATUS_STATE 0
	#define RECONFIG_STATUS_PIN_STATUS 2
	#define RECONFIG_STATUS_SOFTFUNC_STATUS 3

	/* Macros for specifying number of arguments in mailbox command */
	#define MBOX_NUM_ARGS(n, b) (((n) & 0xFF) << (b))
	#define MBOX_DIRECT_COUNT(n) MBOX_NUM_ARGS((n), 0)
	#define MBOX_ARG_DESC_COUNT(n) MBOX_NUM_ARGS((n), 8)
	#define MBOX_RESP_DESC_COUNT(n) MBOX_NUM_ARGS((n), 16)

	#define MBOX_CFGSTAT_STATE_IDLE 0x00000000
	#define MBOX_CFGSTAT_STATE_CONFIG 0x10000000
	#define MBOX_CFGSTAT_STATE_FAILACK 0x08000000
	#define MBOX_CFGSTAT_STATE_ERROR_INVALID 0xf0000001
	#define MBOX_CFGSTAT_STATE_ERROR_CORRUPT 0xf0000002
	#define MBOX_CFGSTAT_STATE_ERROR_AUTH 0xf0000003
	#define MBOX_CFGSTAT_STATE_ERROR_CORE_IO 0xf0000004
	#define MBOX_CFGSTAT_STATE_ERROR_HARDWARE 0xf0000005
	#define MBOX_CFGSTAT_STATE_ERROR_FAKE 0xf0000006
	#define MBOX_CFGSTAT_STATE_ERROR_BOOT_INFO 0xf0000007
	#define MBOX_CFGSTAT_STATE_ERROR_QSPI_ERROR 0xf0000008

	#define RCF_SOFTFUNC_STATUS_CONF_DONE BIT(0)
	#define RCF_SOFTFUNC_STATUS_INIT_DONE BIT(1)
	#define RCF_SOFTFUNC_STATUS_SEU_ERROR BIT(3)
	#define RCF_PIN_STATUS_NSTATUS BIT(31)

	int mbox_send_cmd(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg, u8 urgent,
	u32 resp_buf_len, u32 resp_buf);
	int mbox_send_cmd_psci(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg,
	u8 urgent, u32 resp_buf_len, u32 resp_buf);
	int mbox_send_cmd_only(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg);
	int mbox_send_cmd_only_psci(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg);
	int mbox_rcv_resp(u32 *resp_buf, u32 resp_buf_max_len);
	int mbox_rcv_resp_psci(u32 *resp_buf, u32 resp_buf_max_len);
	int mbox_init(void);

	#ifdef CONFIG_CADENCE_QSPI
	int mbox_qspi_close(void);
	int mbox_qspi_open(void);
	#endif

	int mbox_reset_cold(void);
	int mbox_get_fpga_config_status(u32 cmd);
	int mbox_get_fpga_config_status_psci(u32 cmd);
	#endif /* _MAILBOX_S10_H_ */