include/configs/intip.h - filogic/uboot - Gitiles

 /*
  * (C) Copyright 2009
  * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
  *
  * Based on include/configs/canyonlands.h
  * (C) Copyright 2008
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 /*
  * intip.h - configuration for CompactCenter aka intip (460EX) and DevCon-Center
  */
 #ifndef __CONFIG_H
 #define __CONFIG_H

 /*
  * High Level Configuration Options
  */
 /*
  * This config file is used for CompactCenter(codename intip) and DevCon-Center
  */
 #define CONFIG_460EX		1	/* Specific PPC460EX		*/
 #ifdef CONFIG_DEVCONCENTER
 #define CONFIG_HOSTNAME		devconcenter
 #else
 #define CONFIG_HOSTNAME		intip
 #endif
 #define CONFIG_440		1

 #ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE	0xFFFA0000
 #endif

 /*
  * Include common defines/options for all AMCC eval boards
  */
 #include "amcc-common.h"

 #define CONFIG_SYS_CLK_FREQ	66666667	/* external freq to pll	*/

 #define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_early_init_f */
 #define CONFIG_BOARD_EARLY_INIT_R	1	/* Call board_early_init_r */
 #define CONFIG_MISC_INIT_R		1	/* Call misc_init_r */
 #define CONFIG_BOARD_TYPES		1	/* support board types */
 #define CFG_ALT_MEMTEST

 /*
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  */
 #define CONFIG_SYS_PCI_MEMBASE		0x80000000	/* mapped PCI memory */
 #define CONFIG_SYS_PCI_BASE		0xd0000000	/* internal PCI regs */
 #define CONFIG_SYS_PCI_TARGBASE	CONFIG_SYS_PCI_MEMBASE

 /* EBC stuff */
 #ifdef CONFIG_DEVCONCENTER               /* Devcon-Center has 128 MB of flash */
 #define CONFIG_SYS_FLASH_BASE		0xF8000000	/* later mapped here */
 #define CONFIG_SYS_FLASH_SIZE		(128 << 20)
 #else
 #define CONFIG_SYS_FLASH_BASE		0xFC000000	/* later mapped here */
 #define CONFIG_SYS_FLASH_SIZE		(64 << 20)
 #endif

 #define CONFIG_SYS_NVRAM_BASE		0xE0000000
 #define CONFIG_SYS_UART_BASE		0xE0100000
 #define CONFIG_SYS_IO_BASE		0xE0200000

 #define CONFIG_SYS_BOOT_BASE_ADDR	0xFF000000	/* EBC Boot Space */
 #define CONFIG_SYS_FLASH_BASE_PHYS_H	0x4
 #ifdef CONFIG_DEVCONCENTER               /* Devcon-Center has 128 MB of flash */
 #define CONFIG_SYS_FLASH_BASE_PHYS_L	0xC8000000
 #else
 #define CONFIG_SYS_FLASH_BASE_PHYS_L	0xCC000000
 #endif
 #define CONFIG_SYS_FLASH_BASE_PHYS \
 	(((u64)CONFIG_SYS_FLASH_BASE_PHYS_H << 32) \
 	| (u64)CONFIG_SYS_FLASH_BASE_PHYS_L)

 #define CONFIG_SYS_OCM_BASE		0xE3000000	/* OCM: 64k */
 #define CONFIG_SYS_SRAM_BASE		0xE8000000	/* SRAM: 256k */
 #define CONFIG_SYS_SRAM_SIZE		(256 << 10)
 #define CONFIG_SYS_LOCAL_CONF_REGS	0xEF000000

 #define CONFIG_SYS_AHB_BASE		0xE2000000	/* int. AHB periph. */

 /*
  * Initial RAM & stack pointer (placed in OCM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_BASE	/* OCM */
 #define CONFIG_SYS_INIT_RAM_SIZE	(4 << 10)
 #define CONFIG_SYS_GBL_DATA_OFFSET \
 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

 /*
  * Serial Port
  */
 #define CONFIG_CONS_INDEX	1	/* Use UART0			*/

 /*
  * Environment
  */
 /*
  * Define here the location of the environment variables (FLASH).
  */
 #define	CONFIG_ENV_IS_IN_FLASH	1	/* use FLASH for environment vars */
 #define CONFIG_SYS_NOR_CS		0	/* NOR chip connected to CSx */

 /*
  * FLASH related
  */
 #define CONFIG_SYS_FLASH_CFI		/* The flash is CFI compatible	*/
 #define CONFIG_FLASH_CFI_DRIVER		/* Use common CFI driver	*/
 #define CONFIG_SYS_FLASH_CFI_AMD_RESET	1	/* Use AMD reset cmd */

 #define CONFIG_SYS_FLASH_BANKS_LIST    {CONFIG_SYS_FLASH_BASE}
 #define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks */
 #ifdef CONFIG_DEVCONCENTER
 #define CONFIG_SYS_MAX_FLASH_SECT	1024	/* max num of sectors per chip*/
 #else
 #define CONFIG_SYS_MAX_FLASH_SECT	512	/* max num of sectors per chip*/
 #endif

 #define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase/ms */
 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write/ms */

 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* buff'd writes (20x faster) */
 #define CONFIG_SYS_FLASH_EMPTY_INFO	/* 'E' for empty sector on flinfo */

 #ifdef CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_SECT_SIZE	0x20000		/* size of one complete sector*/
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 #define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector */

 /* Address and size of Redundant Environment Sector	*/
 #define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 #endif /* CONFIG_ENV_IS_IN_FLASH */

 /*
  * DDR SDRAM
  */

 #define CONFIG_AUTOCALIB	"silent\0"	/* default is non-verbose    */

 #define CONFIG_PPC4xx_DDR_AUTOCALIBRATION	/* IBM DDR autocalibration   */
 #define DEBUG_PPC4xx_DDR_AUTOCALIBRATION	/* dynamic DDR autocal debug */
 #undef CONFIG_PPC4xx_DDR_METHOD_A

 /* DDR1/2 SDRAM Device Control Register Data Values */
 /* Memory Queue */
 #define CONFIG_SYS_SDRAM_R0BAS		0x0000f800
 #define CONFIG_SYS_SDRAM_R1BAS		0x00000000
 #define CONFIG_SYS_SDRAM_R2BAS		0x00000000
 #define CONFIG_SYS_SDRAM_R3BAS		0x00000000
 #define CONFIG_SYS_SDRAM_PLBADDULL	0x00000000
 #define CONFIG_SYS_SDRAM_PLBADDUHB	0x00000008
 #define CONFIG_SYS_SDRAM_CONF1LL	0x80001C00
 #define CONFIG_SYS_SDRAM_CONF1HB	0x80001C80
 #define CONFIG_SYS_SDRAM_CONFPATHB	0x10a68000

 /* SDRAM Controller */
 #define CONFIG_SYS_SDRAM0_MB0CF		0x00000201
 #define CONFIG_SYS_SDRAM0_MB1CF		0x00000000
 #define CONFIG_SYS_SDRAM0_MB2CF		0x00000000
 #define CONFIG_SYS_SDRAM0_MB3CF		0x00000000
 #define CONFIG_SYS_SDRAM0_MCOPT1	0x05120000
 #define CONFIG_SYS_SDRAM0_MCOPT2	0x00000000
 #define CONFIG_SYS_SDRAM0_MODT0		0x00000000
 #define CONFIG_SYS_SDRAM0_MODT1		0x00000000
 #define CONFIG_SYS_SDRAM0_MODT2		0x00000000
 #define CONFIG_SYS_SDRAM0_MODT3		0x00000000
 #define CONFIG_SYS_SDRAM0_CODT		0x00000020
 #define CONFIG_SYS_SDRAM0_RTR		0x06180000
 #define CONFIG_SYS_SDRAM0_INITPLR0	0xA8380000
 #define CONFIG_SYS_SDRAM0_INITPLR1	0x81900400
 #define CONFIG_SYS_SDRAM0_INITPLR2	0x81020000
 #define CONFIG_SYS_SDRAM0_INITPLR3	0x81030000
 #define CONFIG_SYS_SDRAM0_INITPLR4	0x81010002
 #define CONFIG_SYS_SDRAM0_INITPLR5	0xE4000552
 #define CONFIG_SYS_SDRAM0_INITPLR6	0x81900400
 #define CONFIG_SYS_SDRAM0_INITPLR7	0x8A880000
 #define CONFIG_SYS_SDRAM0_INITPLR8	0x8A880000
 #define CONFIG_SYS_SDRAM0_INITPLR9	0x8A880000
 #define CONFIG_SYS_SDRAM0_INITPLR10	0x8A880000
 #define CONFIG_SYS_SDRAM0_INITPLR11	0x81000452
 #define CONFIG_SYS_SDRAM0_INITPLR12	0x81010382
 #define CONFIG_SYS_SDRAM0_INITPLR13	0x81010002
 #define CONFIG_SYS_SDRAM0_INITPLR14	0x00000000
 #define CONFIG_SYS_SDRAM0_INITPLR15	0x00000000
 #define CONFIG_SYS_SDRAM0_RQDC		0x80000038
 #define CONFIG_SYS_SDRAM0_RFDC		0x00000257
 #define CONFIG_SYS_SDRAM0_RDCC		0x40000000
 #define CONFIG_SYS_SDRAM0_DLCR		0x00000000
 #define CONFIG_SYS_SDRAM0_CLKTR		0x40000000
 #define CONFIG_SYS_SDRAM0_WRDTR		0x86000823
 #define CONFIG_SYS_SDRAM0_SDTR1		0x80201000
 #define CONFIG_SYS_SDRAM0_SDTR2		0x32204232
 #define CONFIG_SYS_SDRAM0_SDTR3		0x090C0D15
 #define CONFIG_SYS_SDRAM0_MMODE		0x00000452
 #define CONFIG_SYS_SDRAM0_MEMODE	0x00000002

 #define CONFIG_SYS_MBYTES_SDRAM	256	/* 256MB */

 /*
  * I2C
  */
 #define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000

 #define CONFIG_SYS_I2C_EEPROM_ADDR		(0xa8>>1)
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10

 /* I2C bootstrap EEPROM */
 #define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR	0x54
 #define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET	0
 #define CONFIG_4xx_CONFIG_BLOCKSIZE		16

 /* I2C SYSMON */
 #define CONFIG_DTT_LM63         1       /* National LM63        */
 #define CONFIG_DTT_SENSORS      { 0 }   /* Sensor addresses     */
 #define CONFIG_DTT_PWM_LOOKUPTABLE      \
 	{ { 40, 10 }, { 50, 20 }, { 60, 40 } }
 #define CONFIG_DTT_TACH_LIMIT   0xa10

 /* RTC configuration */
 #define CONFIG_RTC_DS1337	1
 #define CONFIG_SYS_I2C_RTC_ADDR	0x68

 /*
  * Ethernet
  */
 #define CONFIG_IBM_EMAC4_V4	1

 #define CONFIG_HAS_ETH0
 #define CONFIG_HAS_ETH1

 #define CONFIG_PHY_ADDR		2	/* PHY address, See schematics	*/
 #define CONFIG_PHY1_ADDR	3

 #define CONFIG_PHY_RESET	1	/* reset phy upon startup	*/
 #define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
 #define CONFIG_PHY_DYNAMIC_ANEG	1

 /*
  * USB-OHCI
  */
 #define CONFIG_USB_OHCI_NEW
 #undef CONFIG_SYS_OHCI_BE_CONTROLLER	/* 460EX has little endian descriptors*/
 #define CONFIG_SYS_OHCI_SWAP_REG_ACCESS	/* 460EX has little endian register */
 #define CONFIG_SYS_OHCI_USE_NPS		/* force NoPowerSwitching mode */
 #define CONFIG_SYS_USB_OHCI_REGS_BASE	(CONFIG_SYS_AHB_BASE | 0xd0000)
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME	"ppc440"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15

 /*
  * Default environment variables
  */
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	CONFIG_AMCC_DEF_ENV						\
 	CONFIG_AMCC_DEF_ENV_POWERPC					\
 	CONFIG_AMCC_DEF_ENV_NOR_UPD					\
 	"kernel_addr=fc000000\0"					\
 	"fdt_addr=fc1e0000\0"						\
 	"ramdisk_addr=fc200000\0"					\
 	"pciconfighost=1\0"						\
 	"pcie_mode=RP:RP\0"						\
 	""

 /*
  * Commands additional to the ones defined in amcc-common.h
  */
 #define CONFIG_CMD_CHIP_CONFIG
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DTT
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_SDRAM

 /* Partitions */
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
 #define CONFIG_ISO_PARTITION

 /*
  * PCI stuff
  */
 /* General PCI */
 #define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
 #define CONFIG_PCI_PNP			/* do pci plug-and-play   */
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup  */
 #define CONFIG_PCI_CONFIG_HOST_BRIDGE
 #define CONFIG_PCI_DISABLE_PCIE

 /* Board-specific PCI */
 #define CONFIG_SYS_PCI_TARGET_INIT	/* let board init pci target */
 #undef	CONFIG_SYS_PCI_MASTER_INIT

 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014	/* IBM */
 #define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever */

 /*
  * External Bus Controller (EBC) Setup
  */

 /*
  * CompactCenter has 64MBytes of NOR FLASH (Spansion 29GL512), but the
  * boot EBC mapping only supports a maximum of 16MBytes
  * (4.ff00.0000 - 4.ffff.ffff).
  * To solve this problem, the FLASH has to get remapped to another
  * EBC address which accepts bigger regions:
  *
  * 0xfc00.0000 -> 4.cc00.0000
  */

 /* Memory Bank 0 (NOR-FLASH) initialization */
 #define CONFIG_SYS_EBC_PB0AP		0x10055e00
 #define CONFIG_SYS_EBC_PB0CR		(CONFIG_SYS_BOOT_BASE_ADDR | 0x9a000)

 /* Memory Bank 1 (NVRAM) initialization	*/
 #define CONFIG_SYS_EBC_PB1AP		0x02815480
 /* BAS=NVRAM,BS=1MB,BU=R/W,BW=8bit*/
 #define CONFIG_SYS_EBC_PB1CR		(CONFIG_SYS_NVRAM_BASE | 0x18000)

 /* Memory Bank 2 (UART) initialization	*/
 #define CONFIG_SYS_EBC_PB2AP		0x02815480
 /* BAS=UART,BS=1MB,BU=R/W,BW=16bit*/
 #define CONFIG_SYS_EBC_PB2CR		(CONFIG_SYS_UART_BASE | 0x1A000)

 /* Memory Bank 3 (IO) initialization */
 #define CONFIG_SYS_EBC_PB3AP		0x02815480
 /* BAS=IO,BS=1MB,BU=R/W,BW=16bit*/
 #define CONFIG_SYS_EBC_PB3CR		(CONFIG_SYS_IO_BASE | 0x1A000)

 /*
  * PPC4xx GPIO Configuration
  */
 /* 460EX: Use USB configuration */
 #define CONFIG_SYS_4xx_GPIO_TABLE { /*	  Out		  GPIO	Alternate1	Alternate2	Alternate3 */ \
 {											\
 /* GPIO Core 0 */									\
 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO0	GMC1TxD(0)	USB2HostD(0)	*/	\
 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO1	GMC1TxD(1)	USB2HostD(1)	*/	\
 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO2	GMC1TxD(2)	USB2HostD(2)	*/	\
 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO3	GMC1TxD(3)	USB2HostD(3)	*/	\
 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO4	GMC1TxD(4)	USB2HostD(4)	*/	\
 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO5	GMC1TxD(5)	USB2HostD(5)	*/	\
 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO6	GMC1TxD(6)	USB2HostD(6)	*/	\
 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO7	GMC1TxD(7)	USB2HostD(7)	*/	\
 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO8	GMC1RxD(0)	USB2OTGD(0)	*/	\
 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO9	GMC1RxD(1)	USB2OTGD(1)	*/	\
 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 GMC1RxD(2)	USB2OTGD(2)	*/	\
 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO11 GMC1RxD(3)	USB2OTGD(3)	*/	\
 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO12 GMC1RxD(4)	USB2OTGD(4)	*/	\
 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO13 GMC1RxD(5)	USB2OTGD(5)	*/	\
 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO14 GMC1RxD(6)	USB2OTGD(6)	*/	\
 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO15 GMC1RxD(7)	USB2OTGD(7)	*/	\
 {GPIO0_BASE, GPIO_IN , GPIO_SEL,  GPIO_OUT_0}, /* GPIO16 GMC1TxER	USB2HostStop	*/	\
 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 GMC1CD		USB2HostNext	*/	\
 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 GMC1RxER	USB2HostDir	*/	\
 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO19 GMC1TxEN	USB2OTGStop	*/	\
 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO20 GMC1CRS	USB2OTGNext	*/	\
 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO21 GMC1RxDV	USB2OTGDir	*/	\
 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO22 NFRDY				*/	\
 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 NFREN				*/	\
 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO24 NFWEN				*/	\
 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO25 NFCLE				*/	\
 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO26 NFALE				*/	\
 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO27 IRQ(0)				*/	\
 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO28 IRQ(1)				*/	\
 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO29 IRQ(2)				*/	\
 {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO30 PerPar0	DMAReq2		IRQ(7)*/ \
 {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO31 PerPar1	DMAAck2		IRQ(8)*/ \
 },											\
 {											\
 /* GPIO Core 1 */									\
 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO32 PerPar2	EOT2/TC2	IRQ(9)*/ \
 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO33 PerPar3	DMAReq3		IRQ(4)*/ \
 {GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_1}, /* GPIO34 UART0_DCD_N	UART1_DSR_CTS_N	UART2_SOUT*/ \
 {GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \
 {GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N DMAAck3	UART3_SIN*/ \
 {GPIO1_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N	EOT3/TC3	UART3_SOUT*/ \
 {GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_DTR_N	UART1_SOUT	*/	\
 {GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N	UART1_SIN	*/	\
 {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 IRQ(3)				*/	\
 {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 CS(1)				*/	\
 {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 CS(2)				*/	\
 {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 CS(3)		DMAReq1		IRQ(10)*/ \
 {GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO44 CS(4)		DMAAck1		IRQ(11)*/ \
 {GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO45 CS(5)		EOT/TC1		IRQ(12)*/ \
 {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO46 PerAddr(5)	DMAReq0		IRQ(13)*/ \
 {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO47 PerAddr(6)	DMAAck0		IRQ(14)*/ \
 {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO48 PerAddr(7)	EOT/TC0		IRQ(15)*/ \
 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO49  Unselect via TraceSelect Bit	*/	\
 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO50  USB_SERVICE_SUSPEND_N		*/	\
 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO51  SPI_CSS_N			*/	\
 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO52  FPGA_PROGRAM_UC_N		*/	\
 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO53  FPGA_INIT_UC_N		*/	\
 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO54  WD_STROBE			*/	\
 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO55  LED_2_OUT			*/	\
 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO56  LED_1_OUT			*/	\
 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO57  Unselect via TraceSelect Bit	*/	\
 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO58  Unselect via TraceSelect Bit	*/	\
 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO59  Unselect via TraceSelect Bit	*/	\
 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO60  Unselect via TraceSelect Bit	*/	\
 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO61  STARTUP_FINISHED_N		*/	\
 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO62  STARTUP_FINISHED		*/	\
 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63  SERVICE_PORT_ACTIVE		*/	\
 }											\
 }

 #endif	/* __CONFIG_H */
	/*
	* (C) Copyright 2009
	* Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
	*
	* Based on include/configs/canyonlands.h
	* (C) Copyright 2008
	* Stefan Roese, DENX Software Engineering, sr@denx.de.
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	/*
	* intip.h - configuration for CompactCenter aka intip (460EX) and DevCon-Center
	*/
	#ifndef __CONFIG_H
	#define __CONFIG_H

	/*
	* High Level Configuration Options
	*/
	/*
	* This config file is used for CompactCenter(codename intip) and DevCon-Center
	*/
	#define CONFIG_460EX 1 /* Specific PPC460EX */
	#ifdef CONFIG_DEVCONCENTER
	#define CONFIG_HOSTNAME devconcenter
	#else
	#define CONFIG_HOSTNAME intip
	#endif
	#define CONFIG_440 1

	#ifndef CONFIG_SYS_TEXT_BASE
	#define CONFIG_SYS_TEXT_BASE 0xFFFA0000
	#endif

	/*
	* Include common defines/options for all AMCC eval boards
	*/
	#include "amcc-common.h"

	#define CONFIG_SYS_CLK_FREQ 66666667 /* external freq to pll */

	#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
	#define CONFIG_BOARD_EARLY_INIT_R 1 /* Call board_early_init_r */
	#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
	#define CONFIG_BOARD_TYPES 1 /* support board types */
	#define CFG_ALT_MEMTEST

	/*
	* Base addresses -- Note these are effective addresses where the
	* actual resources get mapped (not physical addresses)
	*/
	#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped PCI memory */
	#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */
	#define CONFIG_SYS_PCI_TARGBASE CONFIG_SYS_PCI_MEMBASE

	/* EBC stuff */
	#ifdef CONFIG_DEVCONCENTER /* Devcon-Center has 128 MB of flash */
	#define CONFIG_SYS_FLASH_BASE 0xF8000000 /* later mapped here */
	#define CONFIG_SYS_FLASH_SIZE (128 << 20)
	#else
	#define CONFIG_SYS_FLASH_BASE 0xFC000000 /* later mapped here */
	#define CONFIG_SYS_FLASH_SIZE (64 << 20)
	#endif

	#define CONFIG_SYS_NVRAM_BASE 0xE0000000
	#define CONFIG_SYS_UART_BASE 0xE0100000
	#define CONFIG_SYS_IO_BASE 0xE0200000

	#define CONFIG_SYS_BOOT_BASE_ADDR 0xFF000000 /* EBC Boot Space */
	#define CONFIG_SYS_FLASH_BASE_PHYS_H 0x4
	#ifdef CONFIG_DEVCONCENTER /* Devcon-Center has 128 MB of flash */
	#define CONFIG_SYS_FLASH_BASE_PHYS_L 0xC8000000
	#else
	#define CONFIG_SYS_FLASH_BASE_PHYS_L 0xCC000000
	#endif
	#define CONFIG_SYS_FLASH_BASE_PHYS \
	(((u64)CONFIG_SYS_FLASH_BASE_PHYS_H << 32) \
	\| (u64)CONFIG_SYS_FLASH_BASE_PHYS_L)

	#define CONFIG_SYS_OCM_BASE 0xE3000000 /* OCM: 64k */
	#define CONFIG_SYS_SRAM_BASE 0xE8000000 /* SRAM: 256k */
	#define CONFIG_SYS_SRAM_SIZE (256 << 10)
	#define CONFIG_SYS_LOCAL_CONF_REGS 0xEF000000

	#define CONFIG_SYS_AHB_BASE 0xE2000000 /* int. AHB periph. */

	/*
	* Initial RAM & stack pointer (placed in OCM)
	*/
	#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_BASE /* OCM */
	#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10)
	#define CONFIG_SYS_GBL_DATA_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET

	/*
	* Serial Port
	*/
	#define CONFIG_CONS_INDEX 1 /* Use UART0 */

	/*
	* Environment
	*/
	/*
	* Define here the location of the environment variables (FLASH).
	*/
	#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
	#define CONFIG_SYS_NOR_CS 0 /* NOR chip connected to CSx */

	/*
	* FLASH related
	*/
	#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
	#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
	#define CONFIG_SYS_FLASH_CFI_AMD_RESET 1 /* Use AMD reset cmd */

	#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE}
	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
	#ifdef CONFIG_DEVCONCENTER
	#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* max num of sectors per chip*/
	#else
	#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sectors per chip*/
	#endif

	#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase/ms */
	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write/ms */

	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* buff'd writes (20x faster) */
	#define CONFIG_SYS_FLASH_EMPTY_INFO /* 'E' for empty sector on flinfo */

	#ifdef CONFIG_ENV_IS_IN_FLASH
	#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector*/
	#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
	#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */

	/* Address and size of Redundant Environment Sector */
	#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
	#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
	#endif /* CONFIG_ENV_IS_IN_FLASH */

	/*
	* DDR SDRAM
	*/

	#define CONFIG_AUTOCALIB "silent\0" /* default is non-verbose */

	#define CONFIG_PPC4xx_DDR_AUTOCALIBRATION /* IBM DDR autocalibration */
	#define DEBUG_PPC4xx_DDR_AUTOCALIBRATION /* dynamic DDR autocal debug */
	#undef CONFIG_PPC4xx_DDR_METHOD_A

	/* DDR1/2 SDRAM Device Control Register Data Values */
	/* Memory Queue */
	#define CONFIG_SYS_SDRAM_R0BAS 0x0000f800
	#define CONFIG_SYS_SDRAM_R1BAS 0x00000000
	#define CONFIG_SYS_SDRAM_R2BAS 0x00000000
	#define CONFIG_SYS_SDRAM_R3BAS 0x00000000
	#define CONFIG_SYS_SDRAM_PLBADDULL 0x00000000
	#define CONFIG_SYS_SDRAM_PLBADDUHB 0x00000008
	#define CONFIG_SYS_SDRAM_CONF1LL 0x80001C00
	#define CONFIG_SYS_SDRAM_CONF1HB 0x80001C80
	#define CONFIG_SYS_SDRAM_CONFPATHB 0x10a68000

	/* SDRAM Controller */
	#define CONFIG_SYS_SDRAM0_MB0CF 0x00000201
	#define CONFIG_SYS_SDRAM0_MB1CF 0x00000000
	#define CONFIG_SYS_SDRAM0_MB2CF 0x00000000
	#define CONFIG_SYS_SDRAM0_MB3CF 0x00000000
	#define CONFIG_SYS_SDRAM0_MCOPT1 0x05120000
	#define CONFIG_SYS_SDRAM0_MCOPT2 0x00000000
	#define CONFIG_SYS_SDRAM0_MODT0 0x00000000
	#define CONFIG_SYS_SDRAM0_MODT1 0x00000000
	#define CONFIG_SYS_SDRAM0_MODT2 0x00000000
	#define CONFIG_SYS_SDRAM0_MODT3 0x00000000
	#define CONFIG_SYS_SDRAM0_CODT 0x00000020
	#define CONFIG_SYS_SDRAM0_RTR 0x06180000
	#define CONFIG_SYS_SDRAM0_INITPLR0 0xA8380000
	#define CONFIG_SYS_SDRAM0_INITPLR1 0x81900400
	#define CONFIG_SYS_SDRAM0_INITPLR2 0x81020000
	#define CONFIG_SYS_SDRAM0_INITPLR3 0x81030000
	#define CONFIG_SYS_SDRAM0_INITPLR4 0x81010002
	#define CONFIG_SYS_SDRAM0_INITPLR5 0xE4000552
	#define CONFIG_SYS_SDRAM0_INITPLR6 0x81900400
	#define CONFIG_SYS_SDRAM0_INITPLR7 0x8A880000
	#define CONFIG_SYS_SDRAM0_INITPLR8 0x8A880000
	#define CONFIG_SYS_SDRAM0_INITPLR9 0x8A880000
	#define CONFIG_SYS_SDRAM0_INITPLR10 0x8A880000
	#define CONFIG_SYS_SDRAM0_INITPLR11 0x81000452
	#define CONFIG_SYS_SDRAM0_INITPLR12 0x81010382
	#define CONFIG_SYS_SDRAM0_INITPLR13 0x81010002
	#define CONFIG_SYS_SDRAM0_INITPLR14 0x00000000
	#define CONFIG_SYS_SDRAM0_INITPLR15 0x00000000
	#define CONFIG_SYS_SDRAM0_RQDC 0x80000038
	#define CONFIG_SYS_SDRAM0_RFDC 0x00000257
	#define CONFIG_SYS_SDRAM0_RDCC 0x40000000
	#define CONFIG_SYS_SDRAM0_DLCR 0x00000000
	#define CONFIG_SYS_SDRAM0_CLKTR 0x40000000
	#define CONFIG_SYS_SDRAM0_WRDTR 0x86000823
	#define CONFIG_SYS_SDRAM0_SDTR1 0x80201000
	#define CONFIG_SYS_SDRAM0_SDTR2 0x32204232
	#define CONFIG_SYS_SDRAM0_SDTR3 0x090C0D15
	#define CONFIG_SYS_SDRAM0_MMODE 0x00000452
	#define CONFIG_SYS_SDRAM0_MEMODE 0x00000002

	#define CONFIG_SYS_MBYTES_SDRAM 256 /* 256MB */

	/*
	* I2C
	*/
	#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000

	#define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1)
	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10

	/* I2C bootstrap EEPROM */
	#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR 0x54
	#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET 0
	#define CONFIG_4xx_CONFIG_BLOCKSIZE 16

	/* I2C SYSMON */
	#define CONFIG_DTT_LM63 1 /* National LM63 */
	#define CONFIG_DTT_SENSORS { 0 } /* Sensor addresses */
	#define CONFIG_DTT_PWM_LOOKUPTABLE \
	{ { 40, 10 }, { 50, 20 }, { 60, 40 } }
	#define CONFIG_DTT_TACH_LIMIT 0xa10

	/* RTC configuration */
	#define CONFIG_RTC_DS1337 1
	#define CONFIG_SYS_I2C_RTC_ADDR 0x68

	/*
	* Ethernet
	*/
	#define CONFIG_IBM_EMAC4_V4 1

	#define CONFIG_HAS_ETH0
	#define CONFIG_HAS_ETH1

	#define CONFIG_PHY_ADDR 2 /* PHY address, See schematics */
	#define CONFIG_PHY1_ADDR 3

	#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
	#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
	#define CONFIG_PHY_DYNAMIC_ANEG 1

	/*
	* USB-OHCI
	*/
	#define CONFIG_USB_OHCI_NEW
	#undef CONFIG_SYS_OHCI_BE_CONTROLLER /* 460EX has little endian descriptors*/
	#define CONFIG_SYS_OHCI_SWAP_REG_ACCESS /* 460EX has little endian register */
	#define CONFIG_SYS_OHCI_USE_NPS /* force NoPowerSwitching mode */
	#define CONFIG_SYS_USB_OHCI_REGS_BASE (CONFIG_SYS_AHB_BASE \| 0xd0000)
	#define CONFIG_SYS_USB_OHCI_SLOT_NAME "ppc440"
	#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15

	/*
	* Default environment variables
	*/
	#define CONFIG_EXTRA_ENV_SETTINGS \
	CONFIG_AMCC_DEF_ENV \
	CONFIG_AMCC_DEF_ENV_POWERPC \
	CONFIG_AMCC_DEF_ENV_NOR_UPD \
	"kernel_addr=fc000000\0" \
	"fdt_addr=fc1e0000\0" \
	"ramdisk_addr=fc200000\0" \
	"pciconfighost=1\0" \
	"pcie_mode=RP:RP\0" \
	""

	/*
	* Commands additional to the ones defined in amcc-common.h
	*/
	#define CONFIG_CMD_CHIP_CONFIG
	#define CONFIG_CMD_DATE
	#define CONFIG_CMD_DTT
	#define CONFIG_CMD_PCI
	#define CONFIG_CMD_SDRAM

	/* Partitions */
	#define CONFIG_MAC_PARTITION
	#define CONFIG_DOS_PARTITION
	#define CONFIG_ISO_PARTITION

	/*
	* PCI stuff
	*/
	/* General PCI */
	#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
	#define CONFIG_PCI_PNP /* do pci plug-and-play */
	#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
	#define CONFIG_PCI_CONFIG_HOST_BRIDGE
	#define CONFIG_PCI_DISABLE_PCIE

	/* Board-specific PCI */
	#define CONFIG_SYS_PCI_TARGET_INIT /* let board init pci target */
	#undef CONFIG_SYS_PCI_MASTER_INIT

	#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
	#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */

	/*
	* External Bus Controller (EBC) Setup
	*/

	/*
	* CompactCenter has 64MBytes of NOR FLASH (Spansion 29GL512), but the
	* boot EBC mapping only supports a maximum of 16MBytes
	* (4.ff00.0000 - 4.ffff.ffff).
	* To solve this problem, the FLASH has to get remapped to another
	* EBC address which accepts bigger regions:
	*
	* 0xfc00.0000 -> 4.cc00.0000
	*/

	/* Memory Bank 0 (NOR-FLASH) initialization */
	#define CONFIG_SYS_EBC_PB0AP 0x10055e00
	#define CONFIG_SYS_EBC_PB0CR (CONFIG_SYS_BOOT_BASE_ADDR \| 0x9a000)

	/* Memory Bank 1 (NVRAM) initialization */
	#define CONFIG_SYS_EBC_PB1AP 0x02815480
	/* BAS=NVRAM,BS=1MB,BU=R/W,BW=8bit*/
	#define CONFIG_SYS_EBC_PB1CR (CONFIG_SYS_NVRAM_BASE \| 0x18000)

	/* Memory Bank 2 (UART) initialization */
	#define CONFIG_SYS_EBC_PB2AP 0x02815480
	/* BAS=UART,BS=1MB,BU=R/W,BW=16bit*/
	#define CONFIG_SYS_EBC_PB2CR (CONFIG_SYS_UART_BASE \| 0x1A000)

	/* Memory Bank 3 (IO) initialization */
	#define CONFIG_SYS_EBC_PB3AP 0x02815480
	/* BAS=IO,BS=1MB,BU=R/W,BW=16bit*/
	#define CONFIG_SYS_EBC_PB3CR (CONFIG_SYS_IO_BASE \| 0x1A000)

	/*
	* PPC4xx GPIO Configuration
	*/
	/* 460EX: Use USB configuration */
	#define CONFIG_SYS_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \
	{ \
	/* GPIO Core 0 */ \
	{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO0 GMC1TxD(0) USB2HostD(0) */ \
	{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO1 GMC1TxD(1) USB2HostD(1) */ \
	{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO2 GMC1TxD(2) USB2HostD(2) */ \
	{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO3 GMC1TxD(3) USB2HostD(3) */ \
	{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO4 GMC1TxD(4) USB2HostD(4) */ \
	{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO5 GMC1TxD(5) USB2HostD(5) */ \
	{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO6 GMC1TxD(6) USB2HostD(6) */ \
	{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO7 GMC1TxD(7) USB2HostD(7) */ \
	{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 GMC1RxD(0) USB2OTGD(0) */ \
	{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 GMC1RxD(1) USB2OTGD(1) */ \
	{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 GMC1RxD(2) USB2OTGD(2) */ \
	{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO11 GMC1RxD(3) USB2OTGD(3) */ \
	{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO12 GMC1RxD(4) USB2OTGD(4) */ \
	{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO13 GMC1RxD(5) USB2OTGD(5) */ \
	{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO14 GMC1RxD(6) USB2OTGD(6) */ \
	{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO15 GMC1RxD(7) USB2OTGD(7) */ \
	{GPIO0_BASE, GPIO_IN , GPIO_SEL, GPIO_OUT_0}, /* GPIO16 GMC1TxER USB2HostStop */ \
	{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 GMC1CD USB2HostNext */ \
	{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 GMC1RxER USB2HostDir */ \
	{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO19 GMC1TxEN USB2OTGStop */ \
	{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO20 GMC1CRS USB2OTGNext */ \
	{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO21 GMC1RxDV USB2OTGDir */ \
	{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO22 NFRDY */ \
	{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 NFREN */ \
	{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO24 NFWEN */ \
	{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO25 NFCLE */ \
	{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO26 NFALE */ \
	{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO27 IRQ(0) */ \
	{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO28 IRQ(1) */ \
	{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO29 IRQ(2) */ \
	{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO30 PerPar0 DMAReq2 IRQ(7)*/ \
	{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO31 PerPar1 DMAAck2 IRQ(8)*/ \
	}, \
	{ \
	/* GPIO Core 1 */ \
	{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO32 PerPar2 EOT2/TC2 IRQ(9)*/ \
	{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO33 PerPar3 DMAReq3 IRQ(4)*/ \
	{GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_1}, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \
	{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \
	{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N DMAAck3 UART3_SIN*/ \
	{GPIO1_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N EOT3/TC3 UART3_SOUT*/ \
	{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_DTR_N UART1_SOUT */ \
	{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N UART1_SIN */ \
	{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 IRQ(3) */ \
	{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 CS(1) */ \
	{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 CS(2) */ \
	{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 CS(3) DMAReq1 IRQ(10)*/ \
	{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO44 CS(4) DMAAck1 IRQ(11)*/ \
	{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO45 CS(5) EOT/TC1 IRQ(12)*/ \
	{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO46 PerAddr(5) DMAReq0 IRQ(13)*/ \
	{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO47 PerAddr(6) DMAAck0 IRQ(14)*/ \
	{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO48 PerAddr(7) EOT/TC0 IRQ(15)*/ \
	{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO49 Unselect via TraceSelect Bit */ \
	{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO50 USB_SERVICE_SUSPEND_N */ \
	{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO51 SPI_CSS_N */ \
	{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO52 FPGA_PROGRAM_UC_N */ \
	{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO53 FPGA_INIT_UC_N */ \
	{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO54 WD_STROBE */ \
	{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO55 LED_2_OUT */ \
	{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO56 LED_1_OUT */ \
	{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO57 Unselect via TraceSelect Bit */ \
	{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO58 Unselect via TraceSelect Bit */ \
	{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO59 Unselect via TraceSelect Bit */ \
	{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO60 Unselect via TraceSelect Bit */ \
	{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO61 STARTUP_FINISHED_N */ \
	{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO62 STARTUP_FINISHED */ \
	{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63 SERVICE_PORT_ACTIVE */ \
	} \
	}

	#endif /* __CONFIG_H */