board/freescale/p1022ds/spl_minimal.c

/*
 * Copyright 2011 Freescale Semiconductor, Inc.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#include <common.h>
#include <ns16550.h>
#include <asm/io.h>
#include <nand.h>
#include <asm/fsl_law.h>
#include <asm/fsl_ddr_sdram.h>


/*
 * Fixed sdram init -- doesn't use serial presence detect.
 */
void sdram_init(void)
{
	volatile ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR;

	__raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds);
	__raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config);
#if CONFIG_CHIP_SELECTS_PER_CTRL > 1
	__raw_writel(CONFIG_SYS_DDR_CS1_BNDS, &ddr->cs1_bnds);
	__raw_writel(CONFIG_SYS_DDR_CS1_CONFIG, &ddr->cs1_config);
#endif
	__raw_writel(CONFIG_SYS_DDR_TIMING_3, &ddr->timing_cfg_3);
	__raw_writel(CONFIG_SYS_DDR_TIMING_0, &ddr->timing_cfg_0);
	__raw_writel(CONFIG_SYS_DDR_TIMING_1, &ddr->timing_cfg_1);
	__raw_writel(CONFIG_SYS_DDR_TIMING_2, &ddr->timing_cfg_2);

	__raw_writel(CONFIG_SYS_DDR_CONTROL_2, &ddr->sdram_cfg_2);
	__raw_writel(CONFIG_SYS_DDR_MODE_1, &ddr->sdram_mode);
	__raw_writel(CONFIG_SYS_DDR_MODE_2, &ddr->sdram_mode_2);

	__raw_writel(CONFIG_SYS_DDR_INTERVAL, &ddr->sdram_interval);
	__raw_writel(CONFIG_SYS_DDR_DATA_INIT, &ddr->sdram_data_init);
	__raw_writel(CONFIG_SYS_DDR_CLK_CTRL, &ddr->sdram_clk_cntl);

	__raw_writel(CONFIG_SYS_DDR_TIMING_4, &ddr->timing_cfg_4);
	__raw_writel(CONFIG_SYS_DDR_TIMING_5, &ddr->timing_cfg_5);
	__raw_writel(CONFIG_SYS_DDR_ZQ_CONTROL, &ddr->ddr_zq_cntl);
	__raw_writel(CONFIG_SYS_DDR_WRLVL_CONTROL, &ddr->ddr_wrlvl_cntl);

	/* Set, but do not enable the memory */
	__raw_writel(CONFIG_SYS_DDR_CONTROL & ~SDRAM_CFG_MEM_EN,
			&ddr->sdram_cfg);

	in_be32(&ddr->sdram_cfg);
	udelay(500);

	/* Let the controller go */
	out_be32(&ddr->sdram_cfg, in_be32(&ddr->sdram_cfg) | SDRAM_CFG_MEM_EN);
	in_be32(&ddr->sdram_cfg);

	set_next_law(0, CONFIG_SYS_SDRAM_SIZE_LAW, LAW_TRGT_IF_DDR_1);
}

const static u32 sysclk_tbl[] = {
	66666000, 7499900, 83332500, 8999900,
	99999000, 11111000, 12499800, 13333200
};

void board_init_f(ulong bootflag)
{
	int px_spd;
	u32 plat_ratio, sys_clk, bus_clk;
	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;

	/* for FPGA */
	set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
	set_lbc_or(2, CONFIG_SYS_OR2_PRELIM);

	/* initialize selected port with appropriate baud rate */
	px_spd = in_8((unsigned char *)(PIXIS_BASE + PIXIS_SPD));
	sys_clk = sysclk_tbl[px_spd & PIXIS_SPD_SYSCLK_MASK];
	plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
	bus_clk = sys_clk * plat_ratio / 2;

	NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
			bus_clk / 16 / CONFIG_BAUDRATE);

	puts("\nNAND boot... ");

	/* Initialize the DDR3 */
	sdram_init();

	/* copy code to RAM and jump to it - this should not return */
	/* NOTE - code has to be copied out of NAND buffer before
	 * other blocks can be read.
	 */
	relocate_code(CONFIG_SPL_RELOC_STACK, 0,
			CONFIG_SPL_RELOC_TEXT_BASE);
}

void board_init_r(gd_t *gd, ulong dest_addr)
{
	nand_boot();
}

void putc(char c)
{
	if (c == '\n')
		NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r');

	NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c);
}

void puts(const char *str)
{
	while (*str)
		putc(*str++);
}