| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2021 NXP |
| */ |
| |
| #include <common.h> |
| #include <div64.h> |
| #include <asm/io.h> |
| #include <errno.h> |
| #include <asm/arch/imx-regs.h> |
| #include <asm/arch/cgc.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/global_data.h> |
| #include <linux/delay.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| static struct cgc1_regs *cgc1_regs = (struct cgc1_regs *)0x292C0000UL; |
| static struct cgc2_regs *cgc2_regs = (struct cgc2_regs *)0x2da60000UL; |
| |
| void cgc1_soscdiv_init(void) |
| { |
| /* Configure SOSC/FRO DIV1 ~ DIV3 */ |
| clrbits_le32(&cgc1_regs->soscdiv, BIT(7)); |
| clrbits_le32(&cgc1_regs->soscdiv, BIT(15)); |
| clrbits_le32(&cgc1_regs->soscdiv, BIT(23)); |
| clrbits_le32(&cgc1_regs->soscdiv, BIT(31)); |
| |
| clrbits_le32(&cgc1_regs->frodiv, BIT(7)); |
| } |
| |
| void cgc1_pll2_init(void) |
| { |
| u32 reg; |
| |
| if (readl(&cgc1_regs->pll2csr) & BIT(23)) |
| clrbits_le32(&cgc1_regs->pll2csr, BIT(23)); |
| |
| /* Disable PLL2 */ |
| clrbits_le32(&cgc1_regs->pll2csr, BIT(0)); |
| mdelay(1); |
| |
| /* wait valid bit false */ |
| while ((readl(&cgc1_regs->pll2csr) & BIT(24))) |
| ; |
| |
| /* Select SOSC as source, freq = 31 * 24 =744mhz */ |
| reg = 31 << 16; |
| writel(reg, &cgc1_regs->pll2cfg); |
| |
| /* Enable PLL2 */ |
| setbits_le32(&cgc1_regs->pll2csr, BIT(0)); |
| |
| /* Wait for PLL2 clock ready */ |
| while (!(readl(&cgc1_regs->pll2csr) & BIT(24))) |
| ; |
| } |
| |
| static void cgc1_set_a35_clk(u32 clk_src, u32 div_core) |
| { |
| u32 reg; |
| |
| /* ulock */ |
| if (readl(&cgc1_regs->ca35clk) & BIT(31)) |
| clrbits_le32(&cgc1_regs->ca35clk, BIT(31)); |
| |
| reg = readl(&cgc1_regs->ca35clk); |
| reg &= ~GENMASK(29, 21); |
| reg |= ((clk_src & 0x3) << 28); |
| reg |= (((div_core - 1) & 0x3f) << 21); |
| writel(reg, &cgc1_regs->ca35clk); |
| |
| while (!(readl(&cgc1_regs->ca35clk) & BIT(27))) |
| ; |
| } |
| |
| void cgc1_init_core_clk(void) |
| { |
| u32 reg = readl(&cgc1_regs->ca35clk); |
| |
| /* if already selected to PLL2, switch to FRO firstly */ |
| if (((reg >> 28) & 0x3) == 0x1) |
| cgc1_set_a35_clk(0, 1); |
| |
| /* Set pll2 to 750Mhz for 1V */ |
| cgc1_pll2_init(); |
| |
| /* Set A35 clock to pll2 */ |
| cgc1_set_a35_clk(1, 1); |
| } |
| |
| void cgc1_enet_stamp_sel(u32 clk_src) |
| { |
| writel((clk_src & 0x7) << 24, &cgc1_regs->enetstamp); |
| } |
| |
| void cgc1_pll3_init(void) |
| { |
| /* Gate off VCO */ |
| setbits_le32(&cgc1_regs->pll3div_vco, BIT(7)); |
| |
| /* Disable PLL3 */ |
| clrbits_le32(&cgc1_regs->pll3csr, BIT(0)); |
| |
| /* Gate off PFDxDIV */ |
| setbits_le32(&cgc1_regs->pll3div_pfd0, BIT(7) | BIT(15) | BIT(23) | BIT(31)); |
| setbits_le32(&cgc1_regs->pll3div_pfd1, BIT(7) | BIT(15) | BIT(23) | BIT(31)); |
| |
| /* Gate off PFDx */ |
| setbits_le32(&cgc1_regs->pll3pfdcfg, BIT(7)); |
| setbits_le32(&cgc1_regs->pll3pfdcfg, BIT(15)); |
| setbits_le32(&cgc1_regs->pll3pfdcfg, BIT(23)); |
| setbits_le32(&cgc1_regs->pll3pfdcfg, BIT(31)); |
| |
| /* Select SOSC as source */ |
| clrbits_le32(&cgc1_regs->pll3cfg, BIT(0)); |
| |
| //setbits_le32(&cgc1_regs->pll3cfg, 22 << 16); |
| writel(22 << 16, &cgc1_regs->pll3cfg); |
| |
| writel(578, &cgc1_regs->pll3num); |
| writel(1000, &cgc1_regs->pll3denom); |
| |
| /* Enable PLL3 */ |
| setbits_le32(&cgc1_regs->pll3csr, BIT(0)); |
| |
| /* Wait for PLL3 clock ready */ |
| while (!(readl(&cgc1_regs->pll3csr) & BIT(24))) |
| ; |
| /* Gate on VCO */ |
| clrbits_le32(&cgc1_regs->pll3div_vco, BIT(7)); |
| |
| /* |
| * PFD0: 380MHz/396/396/328 |
| */ |
| clrbits_le32(&cgc1_regs->pll3pfdcfg, 0x3F); |
| setbits_le32(&cgc1_regs->pll3pfdcfg, 25 << 0); |
| clrbits_le32(&cgc1_regs->pll3pfdcfg, BIT(7)); |
| while (!(readl(&cgc1_regs->pll3pfdcfg) & BIT(6))) |
| ; |
| |
| clrbits_le32(&cgc1_regs->pll3pfdcfg, 0x3F << 8); |
| setbits_le32(&cgc1_regs->pll3pfdcfg, 24 << 8); |
| clrbits_le32(&cgc1_regs->pll3pfdcfg, BIT(15)); |
| while (!(readl(&cgc1_regs->pll3pfdcfg) & BIT(14))) |
| ; |
| |
| clrbits_le32(&cgc1_regs->pll3pfdcfg, 0x3F << 16); |
| setbits_le32(&cgc1_regs->pll3pfdcfg, 24 << 16); |
| clrbits_le32(&cgc1_regs->pll3pfdcfg, BIT(23)); |
| while (!(readl(&cgc1_regs->pll3pfdcfg) & BIT(22))) |
| ; |
| |
| clrbits_le32(&cgc1_regs->pll3pfdcfg, 0x3F << 24); |
| setbits_le32(&cgc1_regs->pll3pfdcfg, 29 << 24); |
| clrbits_le32(&cgc1_regs->pll3pfdcfg, BIT(31)); |
| while (!(readl(&cgc1_regs->pll3pfdcfg) & BIT(30))) |
| ; |
| |
| clrbits_le32(&cgc1_regs->pll3div_pfd0, BIT(7)); |
| clrbits_le32(&cgc1_regs->pll3div_pfd0, BIT(15)); |
| clrbits_le32(&cgc1_regs->pll3div_pfd0, BIT(23)); |
| clrbits_le32(&cgc1_regs->pll3div_pfd0, BIT(31)); |
| |
| clrbits_le32(&cgc1_regs->pll3div_pfd1, BIT(7)); |
| clrbits_le32(&cgc1_regs->pll3div_pfd1, BIT(15)); |
| clrbits_le32(&cgc1_regs->pll3div_pfd1, BIT(23)); |
| clrbits_le32(&cgc1_regs->pll3div_pfd1, BIT(31)); |
| } |
| |
| void cgc2_pll4_init(void) |
| { |
| /* Disable PFD DIV and clear DIV */ |
| writel(0x80808080, &cgc2_regs->pll4div_pfd0); |
| writel(0x80808080, &cgc2_regs->pll4div_pfd1); |
| |
| /* Gate off and clear PFD */ |
| writel(0x80808080, &cgc2_regs->pll4pfdcfg); |
| |
| /* Disable PLL4 */ |
| writel(0x0, &cgc2_regs->pll4csr); |
| |
| /* Configure PLL4 to 528Mhz and clock source from SOSC */ |
| writel(22 << 16, &cgc2_regs->pll4cfg); |
| writel(0x1, &cgc2_regs->pll4csr); |
| |
| /* wait for PLL4 output valid */ |
| while (!(readl(&cgc2_regs->pll4csr) & BIT(24))) |
| ; |
| |
| /* Enable all 4 PFDs */ |
| setbits_le32(&cgc2_regs->pll4pfdcfg, 18 << 0); |
| setbits_le32(&cgc2_regs->pll4pfdcfg, 30 << 8); /* 316.8Mhz for NIC_LPAV */ |
| setbits_le32(&cgc2_regs->pll4pfdcfg, 12 << 16); |
| setbits_le32(&cgc2_regs->pll4pfdcfg, 24 << 24); |
| |
| clrbits_le32(&cgc2_regs->pll4pfdcfg, BIT(7) | BIT(15) | BIT(23) | BIT(31)); |
| |
| while ((readl(&cgc2_regs->pll4pfdcfg) & (BIT(30) | BIT(22) | BIT(14) | BIT(6))) |
| != (BIT(30) | BIT(22) | BIT(14) | BIT(6))) |
| ; |
| |
| /* Enable PFD DIV */ |
| clrbits_le32(&cgc2_regs->pll4div_pfd0, BIT(7) | BIT(15) | BIT(23) | BIT(31)); |
| clrbits_le32(&cgc2_regs->pll4div_pfd1, BIT(7) | BIT(15) | BIT(23) | BIT(31)); |
| } |
| |
| void cgc2_pll4_pfd_config(enum cgc_clk pllpfd, u32 pfd) |
| { |
| void __iomem *reg = &cgc2_regs->pll4div_pfd0; |
| u32 halt_mask = BIT(7) | BIT(15); |
| u32 pfd_shift = (pllpfd - PLL4_PFD0) * 8; |
| u32 val; |
| |
| if (pllpfd < PLL4_PFD0 || pllpfd > PLL4_PFD3) |
| return; |
| |
| if ((pllpfd - PLL4_PFD0) >> 1) |
| reg = &cgc2_regs->pll4div_pfd1; |
| |
| halt_mask = halt_mask << (((pllpfd - PLL4_PFD0) & 0x1) * 16); |
| |
| /* halt pfd div */ |
| setbits_le32(reg, halt_mask); |
| |
| /* gate pfd */ |
| setbits_le32(&cgc2_regs->pll4pfdcfg, BIT(7) << pfd_shift); |
| |
| val = readl(&cgc2_regs->pll4pfdcfg); |
| val &= ~(0x3f << pfd_shift); |
| val |= (pfd << pfd_shift); |
| writel(val, &cgc2_regs->pll4pfdcfg); |
| |
| /* ungate */ |
| clrbits_le32(&cgc2_regs->pll4pfdcfg, BIT(7) << pfd_shift); |
| |
| /* Wait stable */ |
| while ((readl(&cgc2_regs->pll4pfdcfg) & (BIT(6) << pfd_shift)) |
| != (BIT(6) << pfd_shift)) |
| ; |
| |
| /* enable pfd div */ |
| clrbits_le32(reg, halt_mask); |
| } |
| |
| void cgc2_pll4_pfddiv_config(enum cgc_clk pllpfddiv, u32 div) |
| { |
| void __iomem *reg = &cgc2_regs->pll4div_pfd0; |
| u32 shift = ((pllpfddiv - PLL4_PFD0_DIV1) & 0x3) * 8; |
| |
| if (pllpfddiv < PLL4_PFD0_DIV1 || pllpfddiv > PLL4_PFD3_DIV2) |
| return; |
| |
| if ((pllpfddiv - PLL4_PFD0_DIV1) >> 2) |
| reg = &cgc2_regs->pll4div_pfd1; |
| |
| /* Halt pfd div */ |
| setbits_le32(reg, BIT(7) << shift); |
| |
| /* Clear div */ |
| clrbits_le32(reg, 0x3f << shift); |
| |
| /* Set div*/ |
| setbits_le32(reg, div << shift); |
| |
| /* Enable pfd div */ |
| clrbits_le32(reg, BIT(7) << shift); |
| } |
| |
| void cgc2_ddrclk_config(u32 src, u32 div) |
| { |
| /* If reg lock is set, wait until unlock by HW */ |
| /* This lock is triggered by div updating and ddrclk halt status change, */ |
| while ((readl(&cgc2_regs->ddrclk) & BIT(31))) |
| ; |
| |
| writel((src << 28) | (div << 21), &cgc2_regs->ddrclk); |
| /* wait for DDRCLK switching done */ |
| while (!(readl(&cgc2_regs->ddrclk) & BIT(27))) |
| ; |
| } |
| |
| void cgc2_ddrclk_wait_unlock(void) |
| { |
| while ((readl(&cgc2_regs->ddrclk) & BIT(31))) |
| ; |
| } |
| |
| void cgc2_lpav_init(enum cgc_clk clk) |
| { |
| u32 i, scs, reg; |
| const enum cgc_clk src[] = {FRO, PLL4_PFD1, SOSC, LVDS}; |
| |
| reg = readl(&cgc2_regs->niclpavclk); |
| scs = (reg >> 28) & 0x3; |
| |
| for (i = 0; i < 4; i++) { |
| if (clk == src[i]) { |
| if (scs == i) |
| return; |
| |
| reg &= ~(0x3 << 28); |
| reg |= (i << 28); |
| |
| writel(reg, &cgc2_regs->niclpavclk); |
| break; |
| } |
| } |
| |
| if (i == 4) |
| printf("Invalid clock source [%u] for LPAV\n", clk); |
| } |
| |
| u32 cgc2_nic_get_rate(enum cgc_clk clk) |
| { |
| u32 reg, rate; |
| u32 scs, lpav_axi_clk, lpav_ahb_clk, lpav_bus_clk; |
| const enum cgc_clk src[] = {FRO, PLL4_PFD1, SOSC, LVDS}; |
| |
| reg = readl(&cgc2_regs->niclpavclk); |
| scs = (reg >> 28) & 0x3; |
| lpav_axi_clk = ((reg >> 21) & 0x3f) + 1; |
| lpav_ahb_clk = ((reg >> 14) & 0x3f) + 1; |
| lpav_bus_clk = ((reg >> 7) & 0x3f) + 1; |
| |
| rate = cgc_clk_get_rate(src[scs]); |
| |
| switch (clk) { |
| case LPAV_AXICLK: |
| rate = rate / lpav_axi_clk; |
| break; |
| case LPAV_AHBCLK: |
| rate = rate / (lpav_axi_clk * lpav_ahb_clk); |
| break; |
| case LPAV_BUSCLK: |
| rate = rate / (lpav_axi_clk * lpav_bus_clk); |
| break; |
| default: |
| return 0; |
| } |
| |
| return rate; |
| } |
| |
| u32 decode_pll(enum cgc_clk pll) |
| { |
| u32 reg, infreq, mult; |
| u32 num, denom; |
| |
| infreq = 24000000U; |
| /* |
| * Alought there are four choices for the bypass src, |
| * we choose SOSC 24M which is the default set in ROM. |
| * TODO: check more the comments |
| */ |
| switch (pll) { |
| case PLL2: |
| reg = readl(&cgc1_regs->pll2csr); |
| if (!(reg & BIT(24))) |
| return 0; |
| |
| reg = readl(&cgc1_regs->pll2cfg); |
| mult = (reg >> 16) & 0x7F; |
| denom = readl(&cgc1_regs->pll2denom) & 0x3FFFFFFF; |
| num = readl(&cgc1_regs->pll2num) & 0x3FFFFFFF; |
| |
| return (u64)infreq * mult + (u64)infreq * num / denom; |
| case PLL3: |
| reg = readl(&cgc1_regs->pll3csr); |
| if (!(reg & BIT(24))) |
| return 0; |
| |
| reg = readl(&cgc1_regs->pll3cfg); |
| mult = (reg >> 16) & 0x7F; |
| denom = readl(&cgc1_regs->pll3denom) & 0x3FFFFFFF; |
| num = readl(&cgc1_regs->pll3num) & 0x3FFFFFFF; |
| |
| return (u64)infreq * mult + (u64)infreq * num / denom; |
| case PLL4: |
| reg = readl(&cgc2_regs->pll4csr); |
| if (!(reg & BIT(24))) |
| return 0; |
| |
| reg = readl(&cgc2_regs->pll4cfg); |
| mult = (reg >> 16) & 0x7F; |
| denom = readl(&cgc2_regs->pll4denom) & 0x3FFFFFFF; |
| num = readl(&cgc2_regs->pll4num) & 0x3FFFFFFF; |
| |
| return (u64)infreq * mult + (u64)infreq * num / denom; |
| default: |
| printf("Unsupported pll clocks %d\n", pll); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| u32 cgc_pll_vcodiv_rate(enum cgc_clk clk) |
| { |
| u32 reg, gate, div; |
| void __iomem *plldiv_vco; |
| enum cgc_clk pll; |
| |
| if (clk == PLL3_VCODIV) { |
| plldiv_vco = &cgc1_regs->pll3div_vco; |
| pll = PLL3; |
| } else { |
| plldiv_vco = &cgc2_regs->pll4div_vco; |
| pll = PLL4; |
| } |
| |
| reg = readl(plldiv_vco); |
| gate = BIT(7) & reg; |
| div = reg & 0x3F; |
| |
| return gate ? 0 : decode_pll(pll) / (div + 1); |
| } |
| |
| u32 cgc_pll_pfd_rate(enum cgc_clk clk) |
| { |
| u32 index, gate, vld, reg; |
| void __iomem *pllpfdcfg; |
| enum cgc_clk pll; |
| |
| switch (clk) { |
| case PLL3_PFD0: |
| case PLL3_PFD1: |
| case PLL3_PFD2: |
| case PLL3_PFD3: |
| index = clk - PLL3_PFD0; |
| pllpfdcfg = &cgc1_regs->pll3pfdcfg; |
| pll = PLL3; |
| break; |
| case PLL4_PFD0: |
| case PLL4_PFD1: |
| case PLL4_PFD2: |
| case PLL4_PFD3: |
| index = clk - PLL4_PFD0; |
| pllpfdcfg = &cgc2_regs->pll4pfdcfg; |
| pll = PLL4; |
| break; |
| default: |
| return 0; |
| } |
| |
| reg = readl(pllpfdcfg); |
| gate = reg & (BIT(7) << (index * 8)); |
| vld = reg & (BIT(6) << (index * 8)); |
| |
| if (gate || !vld) |
| return 0; |
| |
| return (u64)decode_pll(pll) * 18 / ((reg >> (index * 8)) & 0x3F); |
| } |
| |
| u32 cgc_pll_pfd_div(enum cgc_clk clk) |
| { |
| void __iomem *base; |
| u32 pfd, index, gate, reg; |
| |
| switch (clk) { |
| case PLL3_PFD0_DIV1: |
| case PLL3_PFD0_DIV2: |
| base = &cgc1_regs->pll3div_pfd0; |
| pfd = PLL3_PFD0; |
| index = clk - PLL3_PFD0_DIV1; |
| break; |
| case PLL3_PFD1_DIV1: |
| case PLL3_PFD1_DIV2: |
| base = &cgc1_regs->pll3div_pfd0; |
| pfd = PLL3_PFD1; |
| index = clk - PLL3_PFD0_DIV1; |
| break; |
| case PLL3_PFD2_DIV1: |
| case PLL3_PFD2_DIV2: |
| base = &cgc1_regs->pll3div_pfd1; |
| pfd = PLL3_PFD2; |
| index = clk - PLL3_PFD2_DIV1; |
| break; |
| case PLL3_PFD3_DIV1: |
| case PLL3_PFD3_DIV2: |
| base = &cgc1_regs->pll3div_pfd1; |
| pfd = PLL3_PFD3; |
| index = clk - PLL3_PFD2_DIV1; |
| break; |
| case PLL4_PFD0_DIV1: |
| case PLL4_PFD0_DIV2: |
| base = &cgc2_regs->pll4div_pfd0; |
| pfd = PLL4_PFD0; |
| index = clk - PLL4_PFD0_DIV1; |
| break; |
| case PLL4_PFD1_DIV1: |
| case PLL4_PFD1_DIV2: |
| base = &cgc2_regs->pll4div_pfd0; |
| pfd = PLL4_PFD1; |
| index = clk - PLL4_PFD0_DIV1; |
| break; |
| case PLL4_PFD2_DIV1: |
| case PLL4_PFD2_DIV2: |
| base = &cgc2_regs->pll4div_pfd1; |
| pfd = PLL4_PFD2; |
| index = clk - PLL4_PFD2_DIV1; |
| break; |
| case PLL4_PFD3_DIV1: |
| case PLL4_PFD3_DIV2: |
| base = &cgc2_regs->pll4div_pfd1; |
| pfd = PLL4_PFD3; |
| index = clk - PLL4_PFD2_DIV1; |
| break; |
| default: |
| return 0; |
| } |
| |
| reg = readl(base); |
| gate = reg & (BIT(7) << (index * 8)); |
| |
| if (gate) |
| return 0; |
| |
| return cgc_pll_pfd_rate(pfd) / (((reg >> (index * 8)) & 0x3F) + 1); |
| } |
| |
| u32 cgc1_nic_get_rate(enum cgc_clk clk) |
| { |
| u32 reg, rate; |
| u32 scs, nic_ad_divplat, nic_per_divplat; |
| u32 xbar_ad_divplat, xbar_divbus, ad_slow; |
| const enum cgc_clk src[] = {FRO, PLL3_PFD0, SOSC, LVDS}; |
| |
| reg = readl(&cgc1_regs->nicclk); |
| scs = (reg >> 28) & 0x3; |
| nic_ad_divplat = ((reg >> 21) & 0x3f) + 1; |
| nic_per_divplat = ((reg >> 14) & 0x3f) + 1; |
| |
| reg = readl(&cgc1_regs->xbarclk); |
| xbar_ad_divplat = ((reg >> 14) & 0x3f) + 1; |
| xbar_divbus = ((reg >> 7) & 0x3f) + 1; |
| ad_slow = (reg & 0x3f) + 1; |
| |
| rate = cgc_clk_get_rate(src[scs]); |
| |
| switch (clk) { |
| case NIC_APCLK: |
| rate = rate / nic_ad_divplat; |
| break; |
| case NIC_PERCLK: |
| rate = rate / (nic_ad_divplat * nic_per_divplat); |
| break; |
| case XBAR_APCLK: |
| rate = rate / (nic_ad_divplat * xbar_ad_divplat); |
| break; |
| case XBAR_BUSCLK: |
| rate = rate / (nic_ad_divplat * xbar_ad_divplat * xbar_divbus); |
| break; |
| case AD_SLOWCLK: |
| rate = rate / (nic_ad_divplat * xbar_ad_divplat * ad_slow); |
| break; |
| default: |
| return 0; |
| } |
| |
| return rate; |
| } |
| |
| u32 cgc1_sosc_div(enum cgc_clk clk) |
| { |
| u32 reg, gate, index; |
| |
| switch (clk) { |
| case SOSC: |
| return 24000000; |
| case SOSC_DIV1: |
| index = 0; |
| break; |
| case SOSC_DIV2: |
| index = 1; |
| break; |
| case SOSC_DIV3: |
| index = 2; |
| break; |
| default: |
| return 0; |
| } |
| |
| reg = readl(&cgc1_regs->soscdiv); |
| gate = reg & (BIT(7) << (index * 8)); |
| |
| if (gate) |
| return 0; |
| |
| return 24000000 / (((reg >> (index * 8)) & 0x3F) + 1); |
| } |
| |
| u32 cgc1_fro_div(enum cgc_clk clk) |
| { |
| u32 reg, gate, vld, index; |
| |
| switch (clk) { |
| case FRO: |
| return 192000000; |
| case FRO_DIV1: |
| index = 0; |
| break; |
| case FRO_DIV2: |
| index = 1; |
| break; |
| case FRO_DIV3: |
| index = 2; |
| break; |
| default: |
| return 0; |
| } |
| |
| reg = readl(&cgc1_regs->frodiv); |
| gate = reg & (BIT(7) << (index * 8)); |
| vld = reg & (BIT(6) << (index * 8)); |
| |
| if (gate || !vld) |
| return 0; |
| |
| return 24000000 / (((reg >> (index * 8)) & 0x3F) + 1); |
| } |
| |
| u32 cgc_clk_get_rate(enum cgc_clk clk) |
| { |
| switch (clk) { |
| case LVDS: |
| return 0; /* No external LVDS clock used */ |
| case SOSC: |
| case SOSC_DIV1: |
| case SOSC_DIV2: |
| case SOSC_DIV3: |
| return cgc1_sosc_div(clk); |
| case FRO: |
| case FRO_DIV1: |
| case FRO_DIV2: |
| case FRO_DIV3: |
| return cgc1_fro_div(clk); |
| case PLL2: |
| case PLL3: |
| case PLL4: |
| return decode_pll(clk); |
| case PLL3_VCODIV: |
| case PLL4_VCODIV: |
| return cgc_pll_vcodiv_rate(clk); |
| case PLL3_PFD0: |
| case PLL3_PFD1: |
| case PLL3_PFD2: |
| case PLL3_PFD3: |
| case PLL4_PFD0: |
| case PLL4_PFD1: |
| case PLL4_PFD2: |
| case PLL4_PFD3: |
| return cgc_pll_pfd_rate(clk); |
| case PLL3_PFD0_DIV1: |
| case PLL3_PFD0_DIV2: |
| case PLL3_PFD1_DIV1: |
| case PLL3_PFD1_DIV2: |
| case PLL3_PFD2_DIV1: |
| case PLL3_PFD2_DIV2: |
| case PLL3_PFD3_DIV1: |
| case PLL3_PFD3_DIV2: |
| case PLL4_PFD0_DIV1: |
| case PLL4_PFD0_DIV2: |
| case PLL4_PFD1_DIV1: |
| case PLL4_PFD1_DIV2: |
| case PLL4_PFD2_DIV1: |
| case PLL4_PFD2_DIV2: |
| case PLL4_PFD3_DIV1: |
| case PLL4_PFD3_DIV2: |
| return cgc_pll_pfd_div(clk); |
| case NIC_APCLK: |
| case NIC_PERCLK: |
| case XBAR_APCLK: |
| case XBAR_BUSCLK: |
| case AD_SLOWCLK: |
| return cgc1_nic_get_rate(clk); |
| case LPAV_AXICLK: |
| case LPAV_AHBCLK: |
| case LPAV_BUSCLK: |
| return cgc2_nic_get_rate(clk); |
| default: |
| printf("Unsupported cgc clock: %d\n", clk); |
| return 0; |
| } |
| } |