blob: 4f474d47022e261bafd0e876d1fa3ea3452ece36 [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2022 Broadcom Ltd.
*/
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
compatible = "brcm,bcm63146", "brcm,bcmbca";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&gic>;
cpus {
#address-cells = <2>;
#size-cells = <0>;
B53_0: cpu@0 {
compatible = "brcm,brahma-b53";
device_type = "cpu";
reg = <0x0 0x0>;
next-level-cache = <&L2_0>;
enable-method = "psci";
};
B53_1: cpu@1 {
compatible = "brcm,brahma-b53";
device_type = "cpu";
reg = <0x0 0x1>;
next-level-cache = <&L2_0>;
enable-method = "psci";
};
L2_0: l2-cache0 {
compatible = "cache";
cache-level = <2>;
cache-unified;
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
};
pmu: pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&B53_0>, <&B53_1>;
};
clocks: clocks {
periph_clk: periph-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <200000000>;
};
uart_clk: uart-clk {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
clocks = <&periph_clk>;
clock-div = <4>;
clock-mult = <1>;
};
hsspi_pll: hsspi-pll {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <200000000>;
};
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
axi@81000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x81000000 0x8000>;
gic: interrupt-controller@1000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x1000 0x1000>,
<0x2000 0x2000>,
<0x4000 0x2000>,
<0x6000 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_LEVEL_HIGH)>;
};
};
bus@ff800000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0xff800000 0x800000>;
hsspi: spi@1000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "brcm,bcm63146-hsspi", "brcm,bcmbca-hsspi-v1.0";
reg = <0x1000 0x600>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&hsspi_pll &hsspi_pll>;
clock-names = "hsspi", "pll";
num-cs = <8>;
status = "disabled";
};
uart0: serial@12000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x12000 0x1000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&uart_clk>, <&uart_clk>;
clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
};
};