| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2022 NXP |
| * |
| * Peng Fan <peng.fan@nxp.com> |
| */ |
| |
| #include <common.h> |
| #include <cpu_func.h> |
| #include <init.h> |
| #include <log.h> |
| #include <asm/arch/imx-regs.h> |
| #include <asm/global_data.h> |
| #include <asm/io.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/ccm_regs.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/arch/trdc.h> |
| #include <asm/mach-imx/boot_mode.h> |
| #include <asm/mach-imx/syscounter.h> |
| #include <asm/armv8/mmu.h> |
| #include <dm/device.h> |
| #include <dm/device_compat.h> |
| #include <dm/uclass.h> |
| #include <env.h> |
| #include <env_internal.h> |
| #include <errno.h> |
| #include <fdt_support.h> |
| #include <imx_thermal.h> |
| #include <linux/bitops.h> |
| #include <linux/bitfield.h> |
| #include <linux/delay.h> |
| #include <thermal.h> |
| #include <asm/setup.h> |
| #include <asm/bootm.h> |
| #include <asm/arch-imx/cpu.h> |
| #include <asm/mach-imx/ele_api.h> |
| #include <fuse.h> |
| #include <asm/arch/ddr.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| struct rom_api *g_rom_api = (struct rom_api *)0x1980; |
| |
| #ifdef CONFIG_ENV_IS_IN_MMC |
| __weak int board_mmc_get_env_dev(int devno) |
| { |
| return devno; |
| } |
| |
| int mmc_get_env_dev(void) |
| { |
| int ret; |
| u32 boot; |
| u16 boot_type; |
| u8 boot_instance; |
| |
| ret = rom_api_query_boot_infor(QUERY_BT_DEV, &boot); |
| |
| if (ret != ROM_API_OKAY) { |
| puts("ROMAPI: failure at query_boot_info\n"); |
| return CONFIG_SYS_MMC_ENV_DEV; |
| } |
| |
| boot_type = boot >> 16; |
| boot_instance = (boot >> 8) & 0xff; |
| |
| debug("boot_type %d, instance %d\n", boot_type, boot_instance); |
| |
| /* If not boot from sd/mmc, use default value */ |
| if (boot_type != BOOT_TYPE_SD && boot_type != BOOT_TYPE_MMC) |
| return env_get_ulong("mmcdev", 10, CONFIG_SYS_MMC_ENV_DEV); |
| |
| return board_mmc_get_env_dev(boot_instance); |
| } |
| #endif |
| |
| /* |
| * SPEED_GRADE[5:4] SPEED_GRADE[3:0] MHz |
| * xx 0000 2300 |
| * xx 0001 2200 |
| * xx 0010 2100 |
| * xx 0011 2000 |
| * xx 0100 1900 |
| * xx 0101 1800 |
| * xx 0110 1700 |
| * xx 0111 1600 |
| * xx 1000 1500 |
| * xx 1001 1400 |
| * xx 1010 1300 |
| * xx 1011 1200 |
| * xx 1100 1100 |
| * xx 1101 1000 |
| * xx 1110 900 |
| * xx 1111 800 |
| */ |
| u32 get_cpu_speed_grade_hz(void) |
| { |
| u32 speed, max_speed; |
| u32 val; |
| |
| fuse_read(2, 3, &val); |
| val = FIELD_GET(SPEED_GRADING_MASK, val) & 0xF; |
| |
| speed = MHZ(2300) - val * MHZ(100); |
| |
| if (is_imx93()) |
| max_speed = MHZ(1700); |
| |
| /* In case the fuse of speed grade not programmed */ |
| if (speed > max_speed) |
| speed = max_speed; |
| |
| return speed; |
| } |
| |
| /* |
| * `00` - Consumer 0C to 95C |
| * `01` - Ext. Consumer -20C to 105C |
| * `10` - Industrial -40C to 105C |
| * `11` - Automotive -40C to 125C |
| */ |
| u32 get_cpu_temp_grade(int *minc, int *maxc) |
| { |
| u32 val; |
| |
| fuse_read(2, 3, &val); |
| val = FIELD_GET(MARKETING_GRADING_MASK, val); |
| |
| if (minc && maxc) { |
| if (val == TEMP_AUTOMOTIVE) { |
| *minc = -40; |
| *maxc = 125; |
| } else if (val == TEMP_INDUSTRIAL) { |
| *minc = -40; |
| *maxc = 105; |
| } else if (val == TEMP_EXTCOMMERCIAL) { |
| if (is_imx93()) { |
| /* imx93 only has extended industrial*/ |
| *minc = -40; |
| *maxc = 125; |
| } else { |
| *minc = -20; |
| *maxc = 105; |
| } |
| } else { |
| *minc = 0; |
| *maxc = 95; |
| } |
| } |
| return val; |
| } |
| |
| static void set_cpu_info(struct ele_get_info_data *info) |
| { |
| gd->arch.soc_rev = info->soc; |
| gd->arch.lifecycle = info->lc; |
| memcpy((void *)&gd->arch.uid, &info->uid, 4 * sizeof(u32)); |
| } |
| |
| static u32 get_cpu_variant_type(u32 type) |
| { |
| /* word 19 */ |
| u32 val = readl((ulong)FSB_BASE_ADDR + 0x8000 + (19 << 2)); |
| u32 val2 = readl((ulong)FSB_BASE_ADDR + 0x8000 + (20 << 2)); |
| bool npu_disable = !!(val & BIT(13)); |
| bool core1_disable = !!(val & BIT(15)); |
| u32 pack_9x9_fused = BIT(4) | BIT(17) | BIT(19) | BIT(24); |
| |
| if ((val2 & pack_9x9_fused) == pack_9x9_fused) |
| type = MXC_CPU_IMX9322; |
| |
| if (npu_disable && core1_disable) |
| return type + 3; |
| else if (npu_disable) |
| return type + 2; |
| else if (core1_disable) |
| return type + 1; |
| |
| return type; |
| } |
| |
| u32 get_cpu_rev(void) |
| { |
| u32 rev = (gd->arch.soc_rev >> 24) - 0xa0; |
| |
| return (get_cpu_variant_type(MXC_CPU_IMX93) << 12) | |
| (CHIP_REV_1_0 + rev); |
| } |
| |
| #define UNLOCK_WORD 0xD928C520 /* unlock word */ |
| #define REFRESH_WORD 0xB480A602 /* refresh word */ |
| |
| static void disable_wdog(void __iomem *wdog_base) |
| { |
| u32 val_cs = readl(wdog_base + 0x00); |
| |
| if (!(val_cs & 0x80)) |
| return; |
| |
| /* default is 32bits cmd */ |
| writel(REFRESH_WORD, (wdog_base + 0x04)); /* Refresh the CNT */ |
| |
| if (!(val_cs & 0x800)) { |
| writel(UNLOCK_WORD, (wdog_base + 0x04)); |
| while (!(readl(wdog_base + 0x00) & 0x800)) |
| ; |
| } |
| writel(0x0, (wdog_base + 0x0C)); /* Set WIN to 0 */ |
| writel(0x400, (wdog_base + 0x08)); /* Set timeout to default 0x400 */ |
| writel(0x2120, (wdog_base + 0x00)); /* Disable it and set update */ |
| |
| while (!(readl(wdog_base + 0x00) & 0x400)) |
| ; |
| } |
| |
| void init_wdog(void) |
| { |
| u32 src_val; |
| |
| disable_wdog((void __iomem *)WDG3_BASE_ADDR); |
| disable_wdog((void __iomem *)WDG4_BASE_ADDR); |
| disable_wdog((void __iomem *)WDG5_BASE_ADDR); |
| |
| src_val = readl(0x54460018); /* reset mask */ |
| src_val &= ~0x1c; |
| writel(src_val, 0x54460018); |
| } |
| |
| static struct mm_region imx93_mem_map[] = { |
| { |
| /* ROM */ |
| .virt = 0x0UL, |
| .phys = 0x0UL, |
| .size = 0x100000UL, |
| .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | |
| PTE_BLOCK_OUTER_SHARE |
| }, { |
| /* TCM */ |
| .virt = 0x201c0000UL, |
| .phys = 0x201c0000UL, |
| .size = 0x80000UL, |
| .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | |
| PTE_BLOCK_NON_SHARE | |
| PTE_BLOCK_PXN | PTE_BLOCK_UXN |
| }, { |
| /* OCRAM */ |
| .virt = 0x20480000UL, |
| .phys = 0x20480000UL, |
| .size = 0xA0000UL, |
| .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | |
| PTE_BLOCK_OUTER_SHARE |
| }, { |
| /* AIPS */ |
| .virt = 0x40000000UL, |
| .phys = 0x40000000UL, |
| .size = 0x40000000UL, |
| .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | |
| PTE_BLOCK_NON_SHARE | |
| PTE_BLOCK_PXN | PTE_BLOCK_UXN |
| }, { |
| /* Flexible Serial Peripheral Interface */ |
| .virt = 0x28000000UL, |
| .phys = 0x28000000UL, |
| .size = 0x08000000UL, |
| .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | |
| PTE_BLOCK_NON_SHARE | |
| PTE_BLOCK_PXN | PTE_BLOCK_UXN |
| }, { |
| /* DRAM1 */ |
| .virt = 0x80000000UL, |
| .phys = 0x80000000UL, |
| .size = PHYS_SDRAM_SIZE, |
| .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | |
| PTE_BLOCK_OUTER_SHARE |
| }, { |
| /* empty entrie to split table entry 5 if needed when TEEs are used */ |
| 0, |
| }, { |
| /* List terminator */ |
| 0, |
| } |
| }; |
| |
| struct mm_region *mem_map = imx93_mem_map; |
| |
| static unsigned int imx9_find_dram_entry_in_mem_map(void) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(imx93_mem_map); i++) |
| if (imx93_mem_map[i].phys == CFG_SYS_SDRAM_BASE) |
| return i; |
| |
| hang(); /* Entry not found, this must never happen. */ |
| } |
| |
| void enable_caches(void) |
| { |
| /* If OPTEE runs, remove OPTEE memory from MMU table to avoid speculative prefetch |
| * If OPTEE does not run, still update the MMU table according to dram banks structure |
| * to set correct dram size from board_phys_sdram_size |
| */ |
| int i = 0; |
| /* |
| * please make sure that entry initial value matches |
| * imx93_mem_map for DRAM1 |
| */ |
| int entry = imx9_find_dram_entry_in_mem_map(); |
| u64 attrs = imx93_mem_map[entry].attrs; |
| |
| while (i < CONFIG_NR_DRAM_BANKS && |
| entry < ARRAY_SIZE(imx93_mem_map)) { |
| if (gd->bd->bi_dram[i].start == 0) |
| break; |
| imx93_mem_map[entry].phys = gd->bd->bi_dram[i].start; |
| imx93_mem_map[entry].virt = gd->bd->bi_dram[i].start; |
| imx93_mem_map[entry].size = gd->bd->bi_dram[i].size; |
| imx93_mem_map[entry].attrs = attrs; |
| debug("Added memory mapping (%d): %llx %llx\n", entry, |
| imx93_mem_map[entry].phys, imx93_mem_map[entry].size); |
| i++; entry++; |
| } |
| |
| icache_enable(); |
| dcache_enable(); |
| } |
| |
| __weak int board_phys_sdram_size(phys_size_t *size) |
| { |
| phys_size_t start, end; |
| phys_size_t val; |
| |
| if (!size) |
| return -EINVAL; |
| |
| val = readl(REG_DDR_CS0_BNDS); |
| start = (val >> 16) << 24; |
| end = (val & 0xFFFF); |
| end = end ? end + 1 : 0; |
| end = end << 24; |
| *size = end - start; |
| |
| val = readl(REG_DDR_CS1_BNDS); |
| start = (val >> 16) << 24; |
| end = (val & 0xFFFF); |
| end = end ? end + 1 : 0; |
| end = end << 24; |
| *size += end - start; |
| |
| return 0; |
| } |
| |
| int dram_init(void) |
| { |
| phys_size_t sdram_size; |
| int ret; |
| |
| ret = board_phys_sdram_size(&sdram_size); |
| if (ret) |
| return ret; |
| |
| /* rom_pointer[1] contains the size of TEE occupies */ |
| if (!IS_ENABLED(CONFIG_SPL_BUILD) && rom_pointer[1]) |
| gd->ram_size = sdram_size - rom_pointer[1]; |
| else |
| gd->ram_size = sdram_size; |
| |
| return 0; |
| } |
| |
| int dram_init_banksize(void) |
| { |
| int bank = 0; |
| int ret; |
| phys_size_t sdram_size; |
| phys_size_t sdram_b1_size, sdram_b2_size; |
| |
| ret = board_phys_sdram_size(&sdram_size); |
| if (ret) |
| return ret; |
| |
| /* Bank 1 can't cross over 4GB space */ |
| if (sdram_size > 0x80000000) { |
| sdram_b1_size = 0x80000000; |
| sdram_b2_size = sdram_size - 0x80000000; |
| } else { |
| sdram_b1_size = sdram_size; |
| sdram_b2_size = 0; |
| } |
| |
| gd->bd->bi_dram[bank].start = PHYS_SDRAM; |
| if (!IS_ENABLED(CONFIG_SPL_BUILD) && rom_pointer[1]) { |
| phys_addr_t optee_start = (phys_addr_t)rom_pointer[0]; |
| phys_size_t optee_size = (size_t)rom_pointer[1]; |
| |
| gd->bd->bi_dram[bank].size = optee_start - gd->bd->bi_dram[bank].start; |
| if ((optee_start + optee_size) < (PHYS_SDRAM + sdram_b1_size)) { |
| if (++bank >= CONFIG_NR_DRAM_BANKS) { |
| puts("CONFIG_NR_DRAM_BANKS is not enough\n"); |
| return -1; |
| } |
| |
| gd->bd->bi_dram[bank].start = optee_start + optee_size; |
| gd->bd->bi_dram[bank].size = PHYS_SDRAM + |
| sdram_b1_size - gd->bd->bi_dram[bank].start; |
| } |
| } else { |
| gd->bd->bi_dram[bank].size = sdram_b1_size; |
| } |
| |
| if (sdram_b2_size) { |
| if (++bank >= CONFIG_NR_DRAM_BANKS) { |
| puts("CONFIG_NR_DRAM_BANKS is not enough for SDRAM_2\n"); |
| return -1; |
| } |
| gd->bd->bi_dram[bank].start = 0x100000000UL; |
| gd->bd->bi_dram[bank].size = sdram_b2_size; |
| } |
| |
| return 0; |
| } |
| |
| phys_size_t get_effective_memsize(void) |
| { |
| int ret; |
| phys_size_t sdram_size; |
| phys_size_t sdram_b1_size; |
| |
| ret = board_phys_sdram_size(&sdram_size); |
| if (!ret) { |
| /* Bank 1 can't cross over 4GB space */ |
| if (sdram_size > 0x80000000) |
| sdram_b1_size = 0x80000000; |
| else |
| sdram_b1_size = sdram_size; |
| |
| if (!IS_ENABLED(CONFIG_SPL_BUILD) && rom_pointer[1]) { |
| /* We will relocate u-boot to top of dram1. TEE position has two cases: |
| * 1. At the top of dram1, Then return the size removed optee size. |
| * 2. In the middle of dram1, return the size of dram1. |
| */ |
| if ((rom_pointer[0] + rom_pointer[1]) == (PHYS_SDRAM + sdram_b1_size)) |
| return ((phys_addr_t)rom_pointer[0] - PHYS_SDRAM); |
| } |
| |
| return sdram_b1_size; |
| } else { |
| return PHYS_SDRAM_SIZE; |
| } |
| } |
| |
| void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) |
| { |
| u32 val[2] = {}; |
| int ret; |
| |
| if (dev_id == 0) { |
| ret = fuse_read(39, 3, &val[0]); |
| if (ret) |
| goto err; |
| |
| ret = fuse_read(39, 4, &val[1]); |
| if (ret) |
| goto err; |
| |
| mac[0] = val[1] >> 8; |
| mac[1] = val[1]; |
| mac[2] = val[0] >> 24; |
| mac[3] = val[0] >> 16; |
| mac[4] = val[0] >> 8; |
| mac[5] = val[0]; |
| |
| } else { |
| ret = fuse_read(39, 5, &val[0]); |
| if (ret) |
| goto err; |
| |
| ret = fuse_read(39, 4, &val[1]); |
| if (ret) |
| goto err; |
| |
| mac[0] = val[1] >> 24; |
| mac[1] = val[1] >> 16; |
| mac[2] = val[0] >> 24; |
| mac[3] = val[0] >> 16; |
| mac[4] = val[0] >> 8; |
| mac[5] = val[0]; |
| } |
| |
| debug("%s: MAC%d: %02x.%02x.%02x.%02x.%02x.%02x\n", |
| __func__, dev_id, mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); |
| return; |
| err: |
| memset(mac, 0, 6); |
| printf("%s: fuse read err: %d\n", __func__, ret); |
| } |
| |
| int print_cpuinfo(void) |
| { |
| u32 cpurev; |
| |
| cpurev = get_cpu_rev(); |
| |
| printf("CPU: i.MX93 rev%d.%d\n", (cpurev & 0x000F0) >> 4, (cpurev & 0x0000F) >> 0); |
| |
| return 0; |
| } |
| |
| static int fixup_thermal_trips(void *blob, const char *name) |
| { |
| int minc, maxc; |
| int node, trip; |
| |
| node = fdt_path_offset(blob, "/thermal-zones"); |
| if (node < 0) |
| return node; |
| |
| node = fdt_subnode_offset(blob, node, name); |
| if (node < 0) |
| return node; |
| |
| node = fdt_subnode_offset(blob, node, "trips"); |
| if (node < 0) |
| return node; |
| |
| get_cpu_temp_grade(&minc, &maxc); |
| |
| fdt_for_each_subnode(trip, blob, node) { |
| const char *type; |
| int temp, ret; |
| |
| type = fdt_getprop(blob, trip, "type", NULL); |
| if (!type) |
| continue; |
| |
| temp = 0; |
| if (!strcmp(type, "critical")) |
| temp = 1000 * (maxc - 5); |
| else if (!strcmp(type, "passive")) |
| temp = 1000 * (maxc - 10); |
| if (temp) { |
| ret = fdt_setprop_u32(blob, trip, "temperature", temp); |
| if (ret) |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| int ft_system_setup(void *blob, struct bd_info *bd) |
| { |
| if (fixup_thermal_trips(blob, "cpu-thermal")) |
| printf("Failed to update cpu-thermal trip(s)"); |
| |
| return 0; |
| } |
| |
| #if defined(CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG) |
| void get_board_serial(struct tag_serialnr *serialnr) |
| { |
| printf("UID: 0x%x 0x%x 0x%x 0x%x\n", |
| gd->arch.uid[0], gd->arch.uid[1], gd->arch.uid[2], gd->arch.uid[3]); |
| |
| serialnr->low = gd->arch.uid[0]; |
| serialnr->high = gd->arch.uid[3]; |
| } |
| #endif |
| |
| static void save_reset_cause(void) |
| { |
| struct src_general_regs *src = (struct src_general_regs *)SRC_GLOBAL_RBASE; |
| u32 srsr = readl(&src->srsr); |
| |
| /* clear srsr in sec mode */ |
| writel(srsr, &src->srsr); |
| |
| /* Save value to GPR1 to pass to nonsecure */ |
| writel(srsr, &src->gpr[0]); |
| } |
| |
| int arch_cpu_init(void) |
| { |
| if (IS_ENABLED(CONFIG_SPL_BUILD)) { |
| /* Disable wdog */ |
| init_wdog(); |
| |
| clock_init(); |
| |
| trdc_early_init(); |
| |
| /* Save SRC SRSR to GPR1 and clear it */ |
| save_reset_cause(); |
| } |
| |
| return 0; |
| } |
| |
| int imx9_probe_mu(void) |
| { |
| struct udevice *devp; |
| int node, ret; |
| u32 res; |
| struct ele_get_info_data info; |
| |
| node = fdt_node_offset_by_compatible(gd->fdt_blob, -1, "fsl,imx93-mu-s4"); |
| |
| ret = uclass_get_device_by_of_offset(UCLASS_MISC, node, &devp); |
| if (ret) |
| return ret; |
| |
| if (gd->flags & GD_FLG_RELOC) |
| return 0; |
| |
| ret = ele_get_info(&info, &res); |
| if (ret) |
| return ret; |
| |
| set_cpu_info(&info); |
| |
| return 0; |
| } |
| EVENT_SPY_SIMPLE(EVT_DM_POST_INIT_F, imx9_probe_mu); |
| EVENT_SPY_SIMPLE(EVT_DM_POST_INIT_R, imx9_probe_mu); |
| |
| int timer_init(void) |
| { |
| #ifdef CONFIG_SPL_BUILD |
| struct sctr_regs *sctr = (struct sctr_regs *)SYSCNT_CTRL_BASE_ADDR; |
| unsigned long freq = readl(&sctr->cntfid0); |
| |
| /* Update with accurate clock frequency */ |
| asm volatile("msr cntfrq_el0, %0" : : "r" (freq) : "memory"); |
| |
| clrsetbits_le32(&sctr->cntcr, SC_CNTCR_FREQ0 | SC_CNTCR_FREQ1, |
| SC_CNTCR_FREQ0 | SC_CNTCR_ENABLE | SC_CNTCR_HDBG); |
| #endif |
| |
| gd->arch.tbl = 0; |
| gd->arch.tbu = 0; |
| |
| return 0; |
| } |
| |
| enum env_location env_get_location(enum env_operation op, int prio) |
| { |
| enum boot_device dev = get_boot_device(); |
| |
| if (prio) |
| return ENVL_UNKNOWN; |
| |
| switch (dev) { |
| case QSPI_BOOT: |
| if (CONFIG_IS_ENABLED(ENV_IS_IN_SPI_FLASH)) |
| return ENVL_SPI_FLASH; |
| return ENVL_NOWHERE; |
| case SD1_BOOT: |
| case SD2_BOOT: |
| case SD3_BOOT: |
| case MMC1_BOOT: |
| case MMC2_BOOT: |
| case MMC3_BOOT: |
| if (CONFIG_IS_ENABLED(ENV_IS_IN_MMC)) |
| return ENVL_MMC; |
| else if (CONFIG_IS_ENABLED(ENV_IS_IN_EXT4)) |
| return ENVL_EXT4; |
| else if (CONFIG_IS_ENABLED(ENV_IS_IN_FAT)) |
| return ENVL_FAT; |
| return ENVL_NOWHERE; |
| default: |
| return ENVL_NOWHERE; |
| } |
| } |
| |
| static int mix_power_init(enum mix_power_domain pd) |
| { |
| enum src_mix_slice_id mix_id; |
| enum src_mem_slice_id mem_id; |
| struct src_mix_slice_regs *mix_regs; |
| struct src_mem_slice_regs *mem_regs; |
| struct src_general_regs *global_regs; |
| u32 scr, val; |
| |
| switch (pd) { |
| case MIX_PD_MEDIAMIX: |
| mix_id = SRC_MIX_MEDIA; |
| mem_id = SRC_MEM_MEDIA; |
| scr = BIT(5); |
| |
| /* Enable ELE handshake */ |
| struct blk_ctrl_s_aonmix_regs *s_regs = |
| (struct blk_ctrl_s_aonmix_regs *)BLK_CTRL_S_ANOMIX_BASE_ADDR; |
| |
| setbits_le32(&s_regs->lp_handshake[0], BIT(13)); |
| break; |
| case MIX_PD_MLMIX: |
| mix_id = SRC_MIX_ML; |
| mem_id = SRC_MEM_ML; |
| scr = BIT(4); |
| break; |
| case MIX_PD_DDRMIX: |
| mix_id = SRC_MIX_DDRMIX; |
| mem_id = SRC_MEM_DDRMIX; |
| scr = BIT(6); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| mix_regs = (struct src_mix_slice_regs *)(ulong)(SRC_IPS_BASE_ADDR + 0x400 * (mix_id + 1)); |
| mem_regs = |
| (struct src_mem_slice_regs *)(ulong)(SRC_IPS_BASE_ADDR + 0x3800 + 0x400 * mem_id); |
| global_regs = (struct src_general_regs *)(ulong)SRC_GLOBAL_RBASE; |
| |
| /* Allow NS to set it */ |
| setbits_le32(&mix_regs->authen_ctrl, BIT(9)); |
| |
| clrsetbits_le32(&mix_regs->psw_ack_ctrl[0], BIT(28), BIT(29)); |
| |
| /* mix reset will be held until boot core write this bit to 1 */ |
| setbits_le32(&global_regs->scr, scr); |
| |
| /* Enable mem in Low power auto sequence */ |
| setbits_le32(&mem_regs->mem_ctrl, BIT(2)); |
| |
| /* Set the power down state */ |
| val = readl(&mix_regs->func_stat); |
| if (val & SRC_MIX_SLICE_FUNC_STAT_PSW_STAT) { |
| /* The mix is default power off, power down it to make PDN_SFT bit |
| * aligned with FUNC STAT |
| */ |
| setbits_le32(&mix_regs->slice_sw_ctrl, BIT(31)); |
| val = readl(&mix_regs->func_stat); |
| |
| /* Since PSW_STAT is 1, can't be used for power off status (SW_CTRL BIT31 set)) */ |
| /* Check the MEM STAT change to ensure SSAR is completed */ |
| while (!(val & SRC_MIX_SLICE_FUNC_STAT_MEM_STAT)) |
| val = readl(&mix_regs->func_stat); |
| |
| /* wait few ipg clock cycles to ensure FSM done and power off status is correct */ |
| /* About 5 cycles at 24Mhz, 1us is enough */ |
| udelay(1); |
| } else { |
| /* The mix is default power on, Do mix power cycle */ |
| setbits_le32(&mix_regs->slice_sw_ctrl, BIT(31)); |
| val = readl(&mix_regs->func_stat); |
| while (!(val & SRC_MIX_SLICE_FUNC_STAT_PSW_STAT)) |
| val = readl(&mix_regs->func_stat); |
| } |
| |
| /* power on */ |
| clrbits_le32(&mix_regs->slice_sw_ctrl, BIT(31)); |
| val = readl(&mix_regs->func_stat); |
| while (val & SRC_MIX_SLICE_FUNC_STAT_ISO_STAT) |
| val = readl(&mix_regs->func_stat); |
| |
| return 0; |
| } |
| |
| void disable_isolation(void) |
| { |
| struct src_general_regs *global_regs = (struct src_general_regs *)(ulong)SRC_GLOBAL_RBASE; |
| /* clear isolation for usbphy, dsi, csi*/ |
| writel(0x0, &global_regs->sp_iso_ctrl); |
| } |
| |
| void soc_power_init(void) |
| { |
| mix_power_init(MIX_PD_MEDIAMIX); |
| mix_power_init(MIX_PD_MLMIX); |
| |
| disable_isolation(); |
| } |
| |
| bool m33_is_rom_kicked(void) |
| { |
| struct blk_ctrl_s_aonmix_regs *s_regs = |
| (struct blk_ctrl_s_aonmix_regs *)BLK_CTRL_S_ANOMIX_BASE_ADDR; |
| |
| if (!(readl(&s_regs->m33_cfg) & BIT(2))) |
| return true; |
| |
| return false; |
| } |
| |
| int m33_prepare(void) |
| { |
| struct src_mix_slice_regs *mix_regs = |
| (struct src_mix_slice_regs *)(ulong)(SRC_IPS_BASE_ADDR + 0x400 * (SRC_MIX_CM33 + 1)); |
| struct src_general_regs *global_regs = |
| (struct src_general_regs *)(ulong)SRC_GLOBAL_RBASE; |
| struct blk_ctrl_s_aonmix_regs *s_regs = |
| (struct blk_ctrl_s_aonmix_regs *)BLK_CTRL_S_ANOMIX_BASE_ADDR; |
| u32 val; |
| |
| if (m33_is_rom_kicked()) |
| return -EPERM; |
| |
| /* Release reset of M33 */ |
| setbits_le32(&global_regs->scr, BIT(0)); |
| |
| /* Check the reset released in M33 MIX func stat */ |
| val = readl(&mix_regs->func_stat); |
| while (!(val & SRC_MIX_SLICE_FUNC_STAT_RST_STAT)) |
| val = readl(&mix_regs->func_stat); |
| |
| /* Release ELE TROUT */ |
| ele_release_m33_trout(); |
| |
| /* Mask WDOG1 IRQ from A55, we use it for M33 reset */ |
| setbits_le32(&s_regs->ca55_irq_mask[1], BIT(6)); |
| |
| /* Turn on WDOG1 clock */ |
| ccm_lpcg_on(CCGR_WDG1, 1); |
| |
| /* Set ELE LP handshake for M33 reset */ |
| setbits_le32(&s_regs->lp_handshake[0], BIT(6)); |
| |
| /* Clear M33 TCM for ECC */ |
| memset((void *)(ulong)0x201e0000, 0, 0x40000); |
| |
| return 0; |
| } |
| |
| int psci_sysreset_get_status(struct udevice *dev, char *buf, int size) |
| { |
| static const char *reset_cause[] = { |
| "POR ", |
| "JTAG ", |
| "IPP USER ", |
| "WDOG1 ", |
| "WDOG2 ", |
| "WDOG3 ", |
| "WDOG4 ", |
| "WDOG5 ", |
| "TEMPSENSE ", |
| "CSU ", |
| "JTAG_SW ", |
| "M33_REQ ", |
| "M33_LOCKUP ", |
| "UNK ", |
| "UNK ", |
| "UNK " |
| }; |
| |
| struct src_general_regs *src = (struct src_general_regs *)SRC_GLOBAL_RBASE; |
| u32 srsr; |
| u32 i; |
| int res; |
| |
| srsr = readl(&src->gpr[0]); |
| |
| for (i = ARRAY_SIZE(reset_cause); i > 0; i--) { |
| if (srsr & (BIT(i - 1))) |
| break; |
| } |
| |
| res = snprintf(buf, size, "Reset Status: %s\n", i ? reset_cause[i - 1] : "unknown reset"); |
| if (res < 0) { |
| dev_err(dev, "Could not write reset status message (err = %d)\n", res); |
| return -EIO; |
| } |
| |
| return 0; |
| } |