CONFIG_ARM=y | |
CONFIG_ARCH_CPU_INIT=y | |
CONFIG_ARCH_MVEBU=y | |
CONFIG_SYS_TEXT_BASE=0x00800000 | |
CONFIG_SPL_LIBCOMMON_SUPPORT=y | |
CONFIG_SPL_LIBGENERIC_SUPPORT=y | |
CONFIG_SYS_MALLOC_F_LEN=0x2000 | |
CONFIG_NR_DRAM_BANKS=2 | |
CONFIG_TARGET_DS414=y | |
CONFIG_ENV_SIZE=0x10000 | |
CONFIG_ENV_OFFSET=0x7E0000 | |
CONFIG_ENV_SECT_SIZE=0x10000 | |
CONFIG_SYS_SPI_U_BOOT_OFFS=0x24000 | |
CONFIG_SPL_TEXT_BASE=0x40004030 | |
CONFIG_SPL_SERIAL_SUPPORT=y | |
CONFIG_SPL=y | |
CONFIG_DEBUG_UART_BASE=0xd0012000 | |
CONFIG_DEBUG_UART_CLOCK=250000000 | |
CONFIG_DEFAULT_DEVICE_TREE="armada-xp-synology-ds414" | |
CONFIG_DEBUG_UART=y | |
CONFIG_BOOTDELAY=3 | |
CONFIG_USE_BOOTARGS=y | |
CONFIG_BOOTARGS="console=ttyS0,115200 ip=off initrd=0x8000040,8M root=/dev/md0 rw syno_hw_version=DS414r1 ihd_num=4 netif_num=2 flash_size=8 SataLedSpecial=1 HddHotplug=1" | |
# CONFIG_DISPLAY_BOARDINFO is not set | |
CONFIG_DISPLAY_BOARDINFO_LATE=y | |
CONFIG_MISC_INIT_R=y | |
CONFIG_SPL_I2C_SUPPORT=y | |
# CONFIG_CMD_FLASH is not set | |
CONFIG_CMD_I2C=y | |
CONFIG_CMD_PCI=y | |
CONFIG_CMD_SPI=y | |
CONFIG_CMD_USB=y | |
# CONFIG_CMD_SETEXPR is not set | |
CONFIG_CMD_DHCP=y | |
CONFIG_CMD_TFTPPUT=y | |
CONFIG_CMD_MII=y | |
CONFIG_CMD_PING=y | |
CONFIG_CMD_TIME=y | |
CONFIG_CMD_EXT2=y | |
CONFIG_CMD_FAT=y | |
CONFIG_CMD_JFFS2=y | |
CONFIG_CMD_MTDPARTS=y | |
CONFIG_CMD_UBI=y | |
CONFIG_ISO_PARTITION=y | |
CONFIG_ENV_OVERWRITE=y | |
CONFIG_USE_ENV_SPI_MAX_HZ=y | |
CONFIG_ENV_SPI_MAX_HZ=50000000 | |
CONFIG_SYS_RELOC_GD_ENV_ADDR=y | |
CONFIG_SPL_OF_TRANSLATE=y | |
CONFIG_BLK=y | |
# CONFIG_MMC is not set | |
CONFIG_MTD=y | |
CONFIG_SPI_FLASH_STMICRO=y | |
CONFIG_PHY_ADDR_ENABLE=y | |
CONFIG_PHY_MARVELL=y | |
CONFIG_PHY_GIGE=y | |
CONFIG_MVNETA=y | |
CONFIG_MII=y | |
CONFIG_PCI=y | |
CONFIG_PCI_MVEBU=y | |
CONFIG_DEBUG_UART_SHIFT=2 | |
CONFIG_SYS_NS16550=y | |
CONFIG_KIRKWOOD_SPI=y | |
CONFIG_USB=y | |
CONFIG_DM_USB=y | |
CONFIG_USB_XHCI_HCD=y | |
# CONFIG_USB_XHCI_MVEBU is not set | |
CONFIG_USB_XHCI_PCI=y | |
CONFIG_USB_EHCI_HCD=y | |
CONFIG_USB_STORAGE=y |