| /* |
| * armboot - Startup Code for ARM926EJS CPU-core |
| * |
| * Copyright (c) 2003 Texas Instruments |
| * |
| * ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------ |
| * |
| * Copyright (c) 2001 Marius Groger <mag@sysgo.de> |
| * Copyright (c) 2002 Alex Zupke <azu@sysgo.de> |
| * Copyright (c) 2002 Gary Jennejohn <garyj@denx.de> |
| * Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com> |
| * Copyright (c) 2003 Kshitij <kshitij@ti.com> |
| * Copyright (c) 2010 Albert Aribaud <albert.u.boot@aribaud.net> |
| * |
| * Change to support call back into iMX28 bootrom |
| * Copyright (c) 2011 Marek Vasut <marek.vasut@gmail.com> |
| * on behalf of DENX Software Engineering GmbH |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <asm-offsets.h> |
| #include <config.h> |
| #include <common.h> |
| #include <version.h> |
| |
| /* |
| ************************************************************************* |
| * |
| * Jump vector table as in table 3.1 in [1] |
| * |
| ************************************************************************* |
| */ |
| |
| |
| .globl _start |
| _start: |
| b reset |
| b undefined_instruction |
| b software_interrupt |
| b prefetch_abort |
| b data_abort |
| b not_used |
| b irq |
| b fiq |
| |
| /* |
| * Vector table, located at address 0x20. |
| * This table allows the code running AFTER SPL, the U-Boot, to install it's |
| * interrupt handlers here. The problem is that the U-Boot is loaded into RAM, |
| * including it's interrupt vectoring table and the table at 0x0 is still the |
| * SPLs. So if interrupt happens in U-Boot, the SPLs interrupt vectoring table |
| * is still used. |
| */ |
| _vt_reset: |
| .word _reset |
| _vt_undefined_instruction: |
| .word _hang |
| _vt_software_interrupt: |
| .word _hang |
| _vt_prefetch_abort: |
| .word _hang |
| _vt_data_abort: |
| .word _hang |
| _vt_not_used: |
| .word _reset |
| _vt_irq: |
| .word _hang |
| _vt_fiq: |
| .word _hang |
| |
| reset: |
| ldr pc, _vt_reset |
| undefined_instruction: |
| ldr pc, _vt_undefined_instruction |
| software_interrupt: |
| ldr pc, _vt_software_interrupt |
| prefetch_abort: |
| ldr pc, _vt_prefetch_abort |
| data_abort: |
| ldr pc, _vt_data_abort |
| not_used: |
| ldr pc, _vt_not_used |
| irq: |
| ldr pc, _vt_irq |
| fiq: |
| ldr pc, _vt_fiq |
| |
| .balignl 16,0xdeadbeef |
| |
| /* |
| ************************************************************************* |
| * |
| * Startup Code (reset vector) |
| * |
| * do important init only if we don't start from memory! |
| * setup Memory and board specific bits prior to relocation. |
| * relocate armboot to ram |
| * setup stack |
| * |
| ************************************************************************* |
| */ |
| |
| .globl _TEXT_BASE |
| _TEXT_BASE: |
| .word CONFIG_SYS_TEXT_BASE |
| |
| /* |
| * These are defined in the board-specific linker script. |
| * Subtracting _start from them lets the linker put their |
| * relative position in the executable instead of leaving |
| * them null. |
| */ |
| .globl _bss_start_ofs |
| _bss_start_ofs: |
| .word __bss_start - _start |
| |
| .globl _bss_end_ofs |
| _bss_end_ofs: |
| .word __bss_end - _start |
| |
| .globl _end_ofs |
| _end_ofs: |
| .word _end - _start |
| |
| #ifdef CONFIG_USE_IRQ |
| /* IRQ stack memory (calculated at run-time) */ |
| .globl IRQ_STACK_START |
| IRQ_STACK_START: |
| .word 0x0badc0de |
| |
| /* IRQ stack memory (calculated at run-time) */ |
| .globl FIQ_STACK_START |
| FIQ_STACK_START: |
| .word 0x0badc0de |
| #endif |
| |
| /* IRQ stack memory (calculated at run-time) + 8 bytes */ |
| .globl IRQ_STACK_START_IN |
| IRQ_STACK_START_IN: |
| .word 0x0badc0de |
| |
| /* |
| * the actual reset code |
| */ |
| |
| _reset: |
| /* |
| * Store all registers on old stack pointer, this will allow us later to |
| * return to the BootROM and let the BootROM load U-Boot into RAM. |
| */ |
| push {r0-r12,r14} |
| |
| /* save control register c1 */ |
| mrc p15, 0, r0, c1, c0, 0 |
| push {r0} |
| |
| /* |
| * set the cpu to SVC32 mode and store old CPSR register content |
| */ |
| mrs r0,cpsr |
| push {r0} |
| bic r0,r0,#0x1f |
| orr r0,r0,#0xd3 |
| msr cpsr,r0 |
| |
| bl board_init_ll |
| |
| /* |
| * restore bootrom's cpu mode (especially FIQ) |
| */ |
| pop {r0} |
| msr cpsr,r0 |
| |
| /* |
| * restore c1 register |
| * (especially set exception vector location back to |
| * bootrom space which is required by bootrom for USB boot) |
| */ |
| pop {r0} |
| mcr p15, 0, r0, c1, c0, 0 |
| |
| pop {r0-r12,r14} |
| bx lr |
| |
| _hang: |
| ldr sp, _TEXT_BASE /* switch to abort stack */ |
| 1: |
| bl 1b /* hang and never return */ |