| /* |
| * (C) Copyright 2001 |
| * Denis Peter, MPL AG Switzerland |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <inttypes.h> |
| #include <pci.h> |
| #include <scsi.h> |
| |
| #ifdef CONFIG_SCSI_DEV_LIST |
| #define SCSI_DEV_LIST CONFIG_SCSI_DEV_LIST |
| #else |
| #ifdef CONFIG_SCSI_SYM53C8XX |
| #define SCSI_VEND_ID 0x1000 |
| #ifndef CONFIG_SCSI_DEV_ID |
| #define SCSI_DEV_ID 0x0001 |
| #else |
| #define SCSI_DEV_ID CONFIG_SCSI_DEV_ID |
| #endif |
| #elif defined CONFIG_SATA_ULI5288 |
| |
| #define SCSI_VEND_ID 0x10b9 |
| #define SCSI_DEV_ID 0x5288 |
| |
| #elif !defined(CONFIG_SCSI_AHCI_PLAT) |
| #error no scsi device defined |
| #endif |
| #define SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID} |
| #endif |
| |
| #if defined(CONFIG_PCI) && !defined(CONFIG_SCSI_AHCI_PLAT) |
| const struct pci_device_id scsi_device_list[] = { SCSI_DEV_LIST }; |
| #endif |
| static ccb tempccb; /* temporary scsi command buffer */ |
| |
| static unsigned char tempbuff[512]; /* temporary data buffer */ |
| |
| static int scsi_max_devs; /* number of highest available scsi device */ |
| |
| static int scsi_curr_dev; /* current device */ |
| |
| static struct blk_desc scsi_dev_desc[CONFIG_SYS_SCSI_MAX_DEVICE]; |
| |
| /* almost the maximum amount of the scsi_ext command.. */ |
| #define SCSI_MAX_READ_BLK 0xFFFF |
| #define SCSI_LBA48_READ 0xFFFFFFF |
| |
| #ifdef CONFIG_SYS_64BIT_LBA |
| void scsi_setup_read16(ccb *pccb, lbaint_t start, unsigned long blocks) |
| { |
| pccb->cmd[0] = SCSI_READ16; |
| pccb->cmd[1] = pccb->lun << 5; |
| pccb->cmd[2] = (unsigned char)(start >> 56) & 0xff; |
| pccb->cmd[3] = (unsigned char)(start >> 48) & 0xff; |
| pccb->cmd[4] = (unsigned char)(start >> 40) & 0xff; |
| pccb->cmd[5] = (unsigned char)(start >> 32) & 0xff; |
| pccb->cmd[6] = (unsigned char)(start >> 24) & 0xff; |
| pccb->cmd[7] = (unsigned char)(start >> 16) & 0xff; |
| pccb->cmd[8] = (unsigned char)(start >> 8) & 0xff; |
| pccb->cmd[9] = (unsigned char)start & 0xff; |
| pccb->cmd[10] = 0; |
| pccb->cmd[11] = (unsigned char)(blocks >> 24) & 0xff; |
| pccb->cmd[12] = (unsigned char)(blocks >> 16) & 0xff; |
| pccb->cmd[13] = (unsigned char)(blocks >> 8) & 0xff; |
| pccb->cmd[14] = (unsigned char)blocks & 0xff; |
| pccb->cmd[15] = 0; |
| pccb->cmdlen = 16; |
| pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ |
| debug("scsi_setup_read16: cmd: %02X %02X startblk %02X%02X%02X%02X%02X%02X%02X%02X blccnt %02X%02X%02X%02X\n", |
| pccb->cmd[0], pccb->cmd[1], |
| pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5], |
| pccb->cmd[6], pccb->cmd[7], pccb->cmd[8], pccb->cmd[9], |
| pccb->cmd[11], pccb->cmd[12], pccb->cmd[13], pccb->cmd[14]); |
| } |
| #endif |
| |
| void scsi_setup_read_ext(ccb *pccb, lbaint_t start, unsigned short blocks) |
| { |
| pccb->cmd[0] = SCSI_READ10; |
| pccb->cmd[1] = pccb->lun << 5; |
| pccb->cmd[2] = (unsigned char)(start >> 24) & 0xff; |
| pccb->cmd[3] = (unsigned char)(start >> 16) & 0xff; |
| pccb->cmd[4] = (unsigned char)(start >> 8) & 0xff; |
| pccb->cmd[5] = (unsigned char)start & 0xff; |
| pccb->cmd[6] = 0; |
| pccb->cmd[7] = (unsigned char)(blocks >> 8) & 0xff; |
| pccb->cmd[8] = (unsigned char)blocks & 0xff; |
| pccb->cmd[6] = 0; |
| pccb->cmdlen = 10; |
| pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ |
| debug("scsi_setup_read_ext: cmd: %02X %02X startblk %02X%02X%02X%02X blccnt %02X%02X\n", |
| pccb->cmd[0], pccb->cmd[1], |
| pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5], |
| pccb->cmd[7], pccb->cmd[8]); |
| } |
| |
| void scsi_setup_write_ext(ccb *pccb, lbaint_t start, unsigned short blocks) |
| { |
| pccb->cmd[0] = SCSI_WRITE10; |
| pccb->cmd[1] = pccb->lun << 5; |
| pccb->cmd[2] = (unsigned char)(start >> 24) & 0xff; |
| pccb->cmd[3] = (unsigned char)(start >> 16) & 0xff; |
| pccb->cmd[4] = (unsigned char)(start >> 8) & 0xff; |
| pccb->cmd[5] = (unsigned char)start & 0xff; |
| pccb->cmd[6] = 0; |
| pccb->cmd[7] = ((unsigned char)(blocks >> 8)) & 0xff; |
| pccb->cmd[8] = (unsigned char)blocks & 0xff; |
| pccb->cmd[9] = 0; |
| pccb->cmdlen = 10; |
| pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ |
| debug("%s: cmd: %02X %02X startblk %02X%02X%02X%02X blccnt %02X%02X\n", |
| __func__, |
| pccb->cmd[0], pccb->cmd[1], |
| pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5], |
| pccb->cmd[7], pccb->cmd[8]); |
| } |
| |
| void scsi_setup_read6(ccb *pccb, lbaint_t start, unsigned short blocks) |
| { |
| pccb->cmd[0] = SCSI_READ6; |
| pccb->cmd[1] = pccb->lun << 5 | ((unsigned char)(start >> 16) & 0x1f); |
| pccb->cmd[2] = (unsigned char)(start >> 8) & 0xff; |
| pccb->cmd[3] = (unsigned char)start & 0xff; |
| pccb->cmd[4] = (unsigned char)blocks & 0xff; |
| pccb->cmd[5] = 0; |
| pccb->cmdlen = 6; |
| pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ |
| debug("scsi_setup_read6: cmd: %02X %02X startblk %02X%02X blccnt %02X\n", |
| pccb->cmd[0], pccb->cmd[1], |
| pccb->cmd[2], pccb->cmd[3], pccb->cmd[4]); |
| } |
| |
| |
| void scsi_setup_inquiry(ccb *pccb) |
| { |
| pccb->cmd[0] = SCSI_INQUIRY; |
| pccb->cmd[1] = pccb->lun << 5; |
| pccb->cmd[2] = 0; |
| pccb->cmd[3] = 0; |
| if (pccb->datalen > 255) |
| pccb->cmd[4] = 255; |
| else |
| pccb->cmd[4] = (unsigned char)pccb->datalen; |
| pccb->cmd[5] = 0; |
| pccb->cmdlen = 6; |
| pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ |
| } |
| |
| #ifdef CONFIG_BLK |
| static ulong scsi_read(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt, |
| void *buffer) |
| #else |
| static ulong scsi_read(struct blk_desc *block_dev, lbaint_t blknr, |
| lbaint_t blkcnt, void *buffer) |
| #endif |
| { |
| #ifdef CONFIG_BLK |
| struct blk_desc *block_dev = dev_get_uclass_platdata(dev); |
| #endif |
| int device = block_dev->devnum; |
| lbaint_t start, blks; |
| uintptr_t buf_addr; |
| unsigned short smallblks = 0; |
| ccb *pccb = (ccb *)&tempccb; |
| device &= 0xff; |
| |
| /* Setup device */ |
| pccb->target = scsi_dev_desc[device].target; |
| pccb->lun = scsi_dev_desc[device].lun; |
| buf_addr = (unsigned long)buffer; |
| start = blknr; |
| blks = blkcnt; |
| debug("\nscsi_read: dev %d startblk " LBAF |
| ", blccnt " LBAF " buffer %lx\n", |
| device, start, blks, (unsigned long)buffer); |
| do { |
| pccb->pdata = (unsigned char *)buf_addr; |
| #ifdef CONFIG_SYS_64BIT_LBA |
| if (start > SCSI_LBA48_READ) { |
| unsigned long blocks; |
| blocks = min_t(lbaint_t, blks, SCSI_MAX_READ_BLK); |
| pccb->datalen = scsi_dev_desc[device].blksz * blocks; |
| scsi_setup_read16(pccb, start, blocks); |
| start += blocks; |
| blks -= blocks; |
| } else |
| #endif |
| if (blks > SCSI_MAX_READ_BLK) { |
| pccb->datalen = scsi_dev_desc[device].blksz * |
| SCSI_MAX_READ_BLK; |
| smallblks = SCSI_MAX_READ_BLK; |
| scsi_setup_read_ext(pccb, start, smallblks); |
| start += SCSI_MAX_READ_BLK; |
| blks -= SCSI_MAX_READ_BLK; |
| } else { |
| pccb->datalen = scsi_dev_desc[device].blksz * blks; |
| smallblks = (unsigned short)blks; |
| scsi_setup_read_ext(pccb, start, smallblks); |
| start += blks; |
| blks = 0; |
| } |
| debug("scsi_read_ext: startblk " LBAF |
| ", blccnt %x buffer %" PRIXPTR "\n", |
| start, smallblks, buf_addr); |
| if (scsi_exec(pccb) != true) { |
| scsi_print_error(pccb); |
| blkcnt -= blks; |
| break; |
| } |
| buf_addr += pccb->datalen; |
| } while (blks != 0); |
| debug("scsi_read_ext: end startblk " LBAF |
| ", blccnt %x buffer %" PRIXPTR "\n", start, smallblks, buf_addr); |
| return blkcnt; |
| } |
| |
| /******************************************************************************* |
| * scsi_write |
| */ |
| |
| /* Almost the maximum amount of the scsi_ext command.. */ |
| #define SCSI_MAX_WRITE_BLK 0xFFFF |
| |
| #ifdef CONFIG_BLK |
| static ulong scsi_write(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt, |
| const void *buffer) |
| #else |
| static ulong scsi_write(struct blk_desc *block_dev, lbaint_t blknr, |
| lbaint_t blkcnt, const void *buffer) |
| #endif |
| { |
| #ifdef CONFIG_BLK |
| struct blk_desc *block_dev = dev_get_uclass_platdata(dev); |
| #endif |
| int device = block_dev->devnum; |
| lbaint_t start, blks; |
| uintptr_t buf_addr; |
| unsigned short smallblks; |
| ccb *pccb = (ccb *)&tempccb; |
| |
| device &= 0xff; |
| |
| /* Setup device */ |
| pccb->target = scsi_dev_desc[device].target; |
| pccb->lun = scsi_dev_desc[device].lun; |
| buf_addr = (unsigned long)buffer; |
| start = blknr; |
| blks = blkcnt; |
| debug("\n%s: dev %d startblk " LBAF ", blccnt " LBAF " buffer %lx\n", |
| __func__, device, start, blks, (unsigned long)buffer); |
| do { |
| pccb->pdata = (unsigned char *)buf_addr; |
| if (blks > SCSI_MAX_WRITE_BLK) { |
| pccb->datalen = (scsi_dev_desc[device].blksz * |
| SCSI_MAX_WRITE_BLK); |
| smallblks = SCSI_MAX_WRITE_BLK; |
| scsi_setup_write_ext(pccb, start, smallblks); |
| start += SCSI_MAX_WRITE_BLK; |
| blks -= SCSI_MAX_WRITE_BLK; |
| } else { |
| pccb->datalen = scsi_dev_desc[device].blksz * blks; |
| smallblks = (unsigned short)blks; |
| scsi_setup_write_ext(pccb, start, smallblks); |
| start += blks; |
| blks = 0; |
| } |
| debug("%s: startblk " LBAF ", blccnt %x buffer %" PRIXPTR "\n", |
| __func__, start, smallblks, buf_addr); |
| if (scsi_exec(pccb) != true) { |
| scsi_print_error(pccb); |
| blkcnt -= blks; |
| break; |
| } |
| buf_addr += pccb->datalen; |
| } while (blks != 0); |
| debug("%s: end startblk " LBAF ", blccnt %x buffer %" PRIXPTR "\n", |
| __func__, start, smallblks, buf_addr); |
| return blkcnt; |
| } |
| |
| int scsi_get_disk_count(void) |
| { |
| return scsi_max_devs; |
| } |
| |
| #if defined(CONFIG_PCI) && !defined(CONFIG_SCSI_AHCI_PLAT) |
| void scsi_init(void) |
| { |
| int busdevfunc = -1; |
| int i; |
| /* |
| * Find a device from the list, this driver will support a single |
| * controller. |
| */ |
| for (i = 0; i < ARRAY_SIZE(scsi_device_list); i++) { |
| /* get PCI Device ID */ |
| #ifdef CONFIG_DM_PCI |
| struct udevice *dev; |
| int ret; |
| |
| ret = dm_pci_find_device(scsi_device_list[i].vendor, |
| scsi_device_list[i].device, 0, &dev); |
| if (!ret) { |
| busdevfunc = dm_pci_get_bdf(dev); |
| break; |
| } |
| #else |
| busdevfunc = pci_find_device(scsi_device_list[i].vendor, |
| scsi_device_list[i].device, |
| 0); |
| #endif |
| if (busdevfunc != -1) |
| break; |
| } |
| |
| if (busdevfunc == -1) { |
| printf("Error: SCSI Controller(s) "); |
| for (i = 0; i < ARRAY_SIZE(scsi_device_list); i++) { |
| printf("%04X:%04X ", |
| scsi_device_list[i].vendor, |
| scsi_device_list[i].device); |
| } |
| printf("not found\n"); |
| return; |
| } |
| #ifdef DEBUG |
| else { |
| printf("SCSI Controller (%04X,%04X) found (%d:%d:%d)\n", |
| scsi_device_list[i].vendor, |
| scsi_device_list[i].device, |
| (busdevfunc >> 16) & 0xFF, |
| (busdevfunc >> 11) & 0x1F, |
| (busdevfunc >> 8) & 0x7); |
| } |
| #endif |
| bootstage_start(BOOTSTAGE_ID_ACCUM_SCSI, "ahci"); |
| scsi_low_level_init(busdevfunc); |
| scsi_scan(1); |
| bootstage_accum(BOOTSTAGE_ID_ACCUM_SCSI); |
| } |
| #endif |
| |
| /* copy src to dest, skipping leading and trailing blanks |
| * and null terminate the string |
| */ |
| void scsi_ident_cpy(unsigned char *dest, unsigned char *src, unsigned int len) |
| { |
| int start, end; |
| |
| start = 0; |
| while (start < len) { |
| if (src[start] != ' ') |
| break; |
| start++; |
| } |
| end = len-1; |
| while (end > start) { |
| if (src[end] != ' ') |
| break; |
| end--; |
| } |
| for (; start <= end; start++) |
| *dest ++= src[start]; |
| *dest = '\0'; |
| } |
| |
| |
| /* Trim trailing blanks, and NUL-terminate string |
| */ |
| void scsi_trim_trail(unsigned char *str, unsigned int len) |
| { |
| unsigned char *p = str + len - 1; |
| |
| while (len-- > 0) { |
| *p-- = '\0'; |
| if (*p != ' ') |
| return; |
| } |
| } |
| |
| int scsi_read_capacity(ccb *pccb, lbaint_t *capacity, unsigned long *blksz) |
| { |
| *capacity = 0; |
| |
| memset(pccb->cmd, '\0', sizeof(pccb->cmd)); |
| pccb->cmd[0] = SCSI_RD_CAPAC10; |
| pccb->cmd[1] = pccb->lun << 5; |
| pccb->cmdlen = 10; |
| pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ |
| |
| pccb->datalen = 8; |
| if (scsi_exec(pccb) != true) |
| return 1; |
| |
| *capacity = ((lbaint_t)pccb->pdata[0] << 24) | |
| ((lbaint_t)pccb->pdata[1] << 16) | |
| ((lbaint_t)pccb->pdata[2] << 8) | |
| ((lbaint_t)pccb->pdata[3]); |
| |
| if (*capacity != 0xffffffff) { |
| /* Read capacity (10) was sufficient for this drive. */ |
| *blksz = ((unsigned long)pccb->pdata[4] << 24) | |
| ((unsigned long)pccb->pdata[5] << 16) | |
| ((unsigned long)pccb->pdata[6] << 8) | |
| ((unsigned long)pccb->pdata[7]); |
| return 0; |
| } |
| |
| /* Read capacity (10) was insufficient. Use read capacity (16). */ |
| memset(pccb->cmd, '\0', sizeof(pccb->cmd)); |
| pccb->cmd[0] = SCSI_RD_CAPAC16; |
| pccb->cmd[1] = 0x10; |
| pccb->cmdlen = 16; |
| pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ |
| |
| pccb->datalen = 16; |
| if (scsi_exec(pccb) != true) |
| return 1; |
| |
| *capacity = ((uint64_t)pccb->pdata[0] << 56) | |
| ((uint64_t)pccb->pdata[1] << 48) | |
| ((uint64_t)pccb->pdata[2] << 40) | |
| ((uint64_t)pccb->pdata[3] << 32) | |
| ((uint64_t)pccb->pdata[4] << 24) | |
| ((uint64_t)pccb->pdata[5] << 16) | |
| ((uint64_t)pccb->pdata[6] << 8) | |
| ((uint64_t)pccb->pdata[7]); |
| |
| *blksz = ((uint64_t)pccb->pdata[8] << 56) | |
| ((uint64_t)pccb->pdata[9] << 48) | |
| ((uint64_t)pccb->pdata[10] << 40) | |
| ((uint64_t)pccb->pdata[11] << 32) | |
| ((uint64_t)pccb->pdata[12] << 24) | |
| ((uint64_t)pccb->pdata[13] << 16) | |
| ((uint64_t)pccb->pdata[14] << 8) | |
| ((uint64_t)pccb->pdata[15]); |
| |
| return 0; |
| } |
| |
| |
| /* |
| * Some setup (fill-in) routines |
| */ |
| void scsi_setup_test_unit_ready(ccb *pccb) |
| { |
| pccb->cmd[0] = SCSI_TST_U_RDY; |
| pccb->cmd[1] = pccb->lun << 5; |
| pccb->cmd[2] = 0; |
| pccb->cmd[3] = 0; |
| pccb->cmd[4] = 0; |
| pccb->cmd[5] = 0; |
| pccb->cmdlen = 6; |
| pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ |
| } |
| |
| static void scsi_init_dev_desc(struct blk_desc *dev_desc, int devnum) |
| { |
| dev_desc->target = 0xff; |
| dev_desc->lun = 0xff; |
| dev_desc->lba = 0; |
| dev_desc->blksz = 0; |
| dev_desc->log2blksz = |
| LOG2_INVALID(typeof(dev_desc->log2blksz)); |
| dev_desc->type = DEV_TYPE_UNKNOWN; |
| dev_desc->vendor[0] = 0; |
| dev_desc->product[0] = 0; |
| dev_desc->revision[0] = 0; |
| dev_desc->removable = false; |
| dev_desc->if_type = IF_TYPE_SCSI; |
| dev_desc->devnum = devnum; |
| dev_desc->part_type = PART_TYPE_UNKNOWN; |
| #ifndef CONFIG_BLK |
| dev_desc->block_read = scsi_read; |
| dev_desc->block_write = scsi_write; |
| #endif |
| } |
| |
| /** |
| * scsi_detect_dev - Detect scsi device |
| * |
| * @pccb: pointer to temporary SCSI command block |
| * @dev_desc: block device description |
| * @lun: Logical unit number |
| * |
| * The scsi_detect_dev detects and fills a dev_desc structure when the device is |
| * detected. |
| * |
| * Return: 0 on success, error value otherwise |
| */ |
| static int scsi_detect_dev(ccb *pccb, struct blk_desc *dev_desc, int lun) |
| { |
| unsigned char perq, modi; |
| lbaint_t capacity; |
| unsigned long blksz; |
| |
| pccb->lun = lun; |
| pccb->pdata = (unsigned char *)&tempbuff; |
| pccb->datalen = 512; |
| scsi_setup_inquiry(pccb); |
| if (scsi_exec(pccb) != true) { |
| if (pccb->contr_stat == SCSI_SEL_TIME_OUT) { |
| /* |
| * selection timeout => assuming no |
| * device present |
| */ |
| debug("Selection timeout ID %d\n", |
| pccb->target); |
| return -ETIMEDOUT; |
| } |
| scsi_print_error(pccb); |
| return -ENODEV; |
| } |
| perq = tempbuff[0]; |
| modi = tempbuff[1]; |
| if ((perq & 0x1f) == 0x1f) |
| return -ENODEV; /* skip unknown devices */ |
| if ((modi & 0x80) == 0x80) /* drive is removable */ |
| dev_desc->removable = true; |
| /* get info for this device */ |
| scsi_ident_cpy((unsigned char *)dev_desc->vendor, |
| &tempbuff[8], 8); |
| scsi_ident_cpy((unsigned char *)dev_desc->product, |
| &tempbuff[16], 16); |
| scsi_ident_cpy((unsigned char *)dev_desc->revision, |
| &tempbuff[32], 4); |
| dev_desc->target = pccb->target; |
| dev_desc->lun = pccb->lun; |
| |
| pccb->datalen = 0; |
| scsi_setup_test_unit_ready(pccb); |
| if (scsi_exec(pccb) != true) { |
| if (dev_desc->removable) { |
| dev_desc->type = perq; |
| goto removable; |
| } |
| scsi_print_error(pccb); |
| return -EINVAL; |
| } |
| if (scsi_read_capacity(pccb, &capacity, &blksz)) { |
| scsi_print_error(pccb); |
| return -EINVAL; |
| } |
| dev_desc->lba = capacity; |
| dev_desc->blksz = blksz; |
| dev_desc->log2blksz = LOG2(dev_desc->blksz); |
| dev_desc->type = perq; |
| part_init(&dev_desc[0]); |
| removable: |
| return 0; |
| } |
| |
| /* |
| * (re)-scan the scsi bus and reports scsi device info |
| * to the user if mode = 1 |
| */ |
| void scsi_scan(int mode) |
| { |
| unsigned char i, lun; |
| int ret; |
| ccb *pccb = (ccb *)&tempccb; |
| |
| if (mode == 1) |
| printf("scanning bus for devices...\n"); |
| for (i = 0; i < CONFIG_SYS_SCSI_MAX_DEVICE; i++) |
| scsi_init_dev_desc(&scsi_dev_desc[i], i); |
| |
| scsi_max_devs = 0; |
| for (i = 0; i < CONFIG_SYS_SCSI_MAX_SCSI_ID; i++) { |
| pccb->target = i; |
| for (lun = 0; lun < CONFIG_SYS_SCSI_MAX_LUN; lun++) { |
| ret = scsi_detect_dev(pccb, |
| &scsi_dev_desc[scsi_max_devs], |
| lun); |
| if (ret) |
| continue; |
| |
| if (mode == 1) { |
| printf(" Device %d: ", 0); |
| dev_print(&scsi_dev_desc[scsi_max_devs]); |
| } /* if mode */ |
| scsi_max_devs++; |
| } /* next LUN */ |
| } |
| if (scsi_max_devs > 0) |
| scsi_curr_dev = 0; |
| else |
| scsi_curr_dev = -1; |
| |
| printf("Found %d device(s).\n", scsi_max_devs); |
| #ifndef CONFIG_SPL_BUILD |
| setenv_ulong("scsidevs", scsi_max_devs); |
| #endif |
| } |
| |
| #ifdef CONFIG_BLK |
| static const struct blk_ops scsi_blk_ops = { |
| .read = scsi_read, |
| .write = scsi_write, |
| }; |
| |
| U_BOOT_DRIVER(scsi_blk) = { |
| .name = "scsi_blk", |
| .id = UCLASS_BLK, |
| .ops = &scsi_blk_ops, |
| }; |
| #else |
| U_BOOT_LEGACY_BLK(scsi) = { |
| .if_typename = "scsi", |
| .if_type = IF_TYPE_SCSI, |
| .max_devs = CONFIG_SYS_SCSI_MAX_DEVICE, |
| .desc = scsi_dev_desc, |
| }; |
| #endif |