| if OMAP54XX |
| |
| config SPL_EXT_SUPPORT |
| default y |
| |
| config SPL_FAT_SUPPORT |
| default y |
| |
| config SPL_GPIO_SUPPORT |
| default y |
| |
| config SPL_I2C_SUPPORT |
| default y |
| |
| config SPL_LIBCOMMON_SUPPORT |
| default y |
| |
| config SPL_LIBDISK_SUPPORT |
| default y |
| |
| config SPL_LIBGENERIC_SUPPORT |
| default y |
| |
| config SPL_MMC_SUPPORT |
| default y |
| |
| config SPL_NAND_SUPPORT |
| default y |
| |
| config SPL_POWER_SUPPORT |
| default y |
| |
| config SPL_SERIAL_SUPPORT |
| default y |
| |
| config SPL_DISPLAY_PRINT |
| default y |
| |
| choice |
| prompt "OMAP5 board select" |
| optional |
| |
| config TARGET_CM_T54 |
| bool "CompuLab CM-T54" |
| |
| config TARGET_OMAP5_UEVM |
| bool "TI OMAP5 uEVM board" |
| |
| config TARGET_DRA7XX_EVM |
| bool "TI DRA7XX" |
| select TI_I2C_BOARD_DETECT |
| select PHYS_64BIT |
| |
| config TARGET_AM57XX_EVM |
| bool "AM57XX" |
| select TI_I2C_BOARD_DETECT |
| |
| endchoice |
| |
| config SYS_SOC |
| default "omap5" |
| |
| config TI_SECURE_EMIF_REGION_START |
| hex "Reserved EMIF region start address" |
| depends on TI_SECURE_DEVICE |
| default 0x0 |
| help |
| Reserved EMIF region start address. Set to "0" to auto-select |
| to be at the end of the external memory region. |
| |
| config TI_SECURE_EMIF_TOTAL_REGION_SIZE |
| hex "Reserved EMIF region size" |
| depends on TI_SECURE_DEVICE |
| default 0x0 |
| help |
| Total reserved EMIF region size. Default is 0, which means no reserved EMIF |
| region on secure devices. |
| |
| config TI_SECURE_EMIF_PROTECTED_REGION_SIZE |
| hex "Size of protected region within reserved EMIF region" |
| depends on TI_SECURE_DEVICE |
| default 0x0 |
| help |
| This config option is used to specify the size of the portion of the total |
| reserved EMIF region set aside for secure OS needs that will be protected |
| using hardware memory firewalls. This value must be smaller than the |
| TI_SECURE_EMIF_TOTAL_REGION_SIZE value. |
| |
| if TARGET_DRA7XX_EVM || TARGET_AM57XX_EVM |
| menu "Voltage Domain OPP selections" |
| |
| choice |
| prompt "MPU Voltage Domain" |
| default DRA7_MPU_OPP_NOM |
| help |
| Select the Operating Performance Point(OPP) for the MPU voltage |
| domain on DRA7xx & AM57xx SoCs. |
| |
| config DRA7_MPU_OPP_NOM |
| bool "OPP NOM" |
| help |
| This config option enables Normal OPP for MPU. This is the safest |
| option for booting. |
| |
| endchoice |
| |
| choice |
| prompt "DSPEVE Voltage Domain" |
| help |
| Select the Operating Performance Point(OPP) for the DSPEVE voltage |
| domain on DRA7xx & AM57xx SoCs. |
| |
| config DRA7_DSPEVE_OPP_NOM |
| bool "OPP NOM" |
| help |
| This config option enables Normal OPP for DSPEVE. This is the safest |
| option for booting and choose this when unsure about other OPPs . |
| |
| config DRA7_DSPEVE_OPP_OD |
| bool "OPP OD" |
| help |
| This config option enables Over drive OPP for DSPEVE. |
| |
| config DRA7_DSPEVE_OPP_HIGH |
| bool "OPP HIGH" |
| help |
| This config option enables High OPP for DSPEVE. |
| |
| endchoice |
| |
| choice |
| prompt "IVA Voltage Domain" |
| help |
| Select the Operating Performance Point(OPP) for the IVA voltage |
| domain on DRA7xx & AM57xx SoCs. |
| |
| config DRA7_IVA_OPP_NOM |
| bool "OPP NOM" |
| help |
| This config option enables Normal OPP for IVA. This is the safest |
| option for booting and choose this when unsure about other OPPs . |
| |
| config DRA7_IVA_OPP_OD |
| bool "OPP OD" |
| help |
| This config option enables Over drive OPP for IVA. |
| |
| config DRA7_IVA_OPP_HIGH |
| bool "OPP HIGH" |
| help |
| This config option enables High OPP for IVA. |
| |
| endchoice |
| |
| choice |
| prompt "GPU Voltage Domain" |
| help |
| Select the Operating Performance Point(OPP) for the GPU voltage |
| domain on DRA7xx & AM57xx SoCs. |
| |
| config DRA7_GPU_OPP_NOM |
| bool "OPP NOM" |
| help |
| This config option enables Normal OPP for GPU. This is the safest |
| option for booting and choose this when unsure about other OPPs . |
| |
| config DRA7_GPU_OPP_OD |
| bool "OPP OD" |
| help |
| This config option enables Over drive OPP for GPU. |
| |
| config DRA7_GPU_OPP_HIGH |
| bool "OPP HIGH" |
| help |
| This config option enables High OPP for GPU. |
| |
| endchoice |
| |
| endmenu |
| endif |
| |
| source "board/compulab/cm_t54/Kconfig" |
| source "board/ti/omap5_uevm/Kconfig" |
| source "board/ti/dra7xx/Kconfig" |
| source "board/ti/am57xx/Kconfig" |
| |
| endif |