| /* |
| * |
| * Common functions for OMAP4/5 based boards |
| * |
| * (C) Copyright 2010 |
| * Texas Instruments, <www.ti.com> |
| * |
| * Author : |
| * Aneesh V <aneesh@ti.com> |
| * Steve Sakoman <steve@sakoman.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| #include <common.h> |
| #include <spl.h> |
| #include <asm/arch/sys_proto.h> |
| #include <linux/sizes.h> |
| #include <asm/emif.h> |
| #include <asm/omap_common.h> |
| #include <linux/compiler.h> |
| #include <asm/system.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| void do_set_mux(u32 base, struct pad_conf_entry const *array, int size) |
| { |
| int i; |
| struct pad_conf_entry *pad = (struct pad_conf_entry *) array; |
| |
| for (i = 0; i < size; i++, pad++) |
| writew(pad->val, base + pad->offset); |
| } |
| |
| static void set_mux_conf_regs(void) |
| { |
| switch (omap_hw_init_context()) { |
| case OMAP_INIT_CONTEXT_SPL: |
| set_muxconf_regs_essential(); |
| break; |
| case OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL: |
| break; |
| case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR: |
| case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH: |
| set_muxconf_regs_essential(); |
| break; |
| } |
| } |
| |
| u32 cortex_rev(void) |
| { |
| |
| unsigned int rev; |
| |
| /* Read Main ID Register (MIDR) */ |
| asm ("mrc p15, 0, %0, c0, c0, 0" : "=r" (rev)); |
| |
| return rev; |
| } |
| |
| static void omap_rev_string(void) |
| { |
| u32 omap_rev = omap_revision(); |
| u32 soc_variant = (omap_rev & 0xF0000000) >> 28; |
| u32 omap_variant = (omap_rev & 0xFFFF0000) >> 16; |
| u32 major_rev = (omap_rev & 0x00000F00) >> 8; |
| u32 minor_rev = (omap_rev & 0x000000F0) >> 4; |
| |
| if (soc_variant) |
| printf("OMAP"); |
| else |
| printf("DRA"); |
| printf("%x ES%x.%x\n", omap_variant, major_rev, |
| minor_rev); |
| } |
| |
| #ifdef CONFIG_SPL_BUILD |
| void spl_display_print(void) |
| { |
| omap_rev_string(); |
| } |
| #endif |
| |
| void __weak srcomp_enable(void) |
| { |
| } |
| |
| #ifdef CONFIG_ARCH_CPU_INIT |
| /* |
| * SOC specific cpu init |
| */ |
| int arch_cpu_init(void) |
| { |
| #ifdef CONFIG_SPL |
| save_omap_boot_params(); |
| #endif |
| return 0; |
| } |
| #endif /* CONFIG_ARCH_CPU_INIT */ |
| |
| /** |
| * do_board_detect() - Detect board description |
| * |
| * Function to detect board description. This is expected to be |
| * overridden in the SoC family board file where desired. |
| */ |
| void __weak do_board_detect(void) |
| { |
| } |
| |
| void s_init(void) |
| { |
| } |
| |
| /** |
| * early_system_init - Does Early system initialization. |
| * |
| * Does early system init of watchdog, muxing, andclocks |
| * Watchdog disable is done always. For the rest what gets done |
| * depends on the boot mode in which this function is executed when |
| * 1. SPL running from SRAM |
| * 2. U-Boot running from FLASH |
| * 3. U-Boot loaded to SDRAM by SPL |
| * 4. U-Boot loaded to SDRAM by ROM code using the |
| * Configuration Header feature |
| * Please have a look at the respective functions to see what gets |
| * done in each of these cases |
| * This function is called with SRAM stack. |
| */ |
| void early_system_init(void) |
| { |
| init_omap_revision(); |
| hw_data_init(); |
| |
| #ifdef CONFIG_SPL_BUILD |
| if (warm_reset() && |
| (is_omap44xx() || (omap_revision() == OMAP5430_ES1_0))) |
| force_emif_self_refresh(); |
| #endif |
| watchdog_init(); |
| set_mux_conf_regs(); |
| #ifdef CONFIG_SPL_BUILD |
| srcomp_enable(); |
| do_io_settings(); |
| #endif |
| setup_early_clocks(); |
| do_board_detect(); |
| prcm_init(); |
| } |
| |
| #ifdef CONFIG_SPL_BUILD |
| void board_init_f(ulong dummy) |
| { |
| early_system_init(); |
| #ifdef CONFIG_BOARD_EARLY_INIT_F |
| board_early_init_f(); |
| #endif |
| /* For regular u-boot sdram_init() is called from dram_init() */ |
| sdram_init(); |
| } |
| #endif |
| |
| int arch_cpu_init_dm(void) |
| { |
| early_system_init(); |
| return 0; |
| } |
| |
| /* |
| * Routine: wait_for_command_complete |
| * Description: Wait for posting to finish on watchdog |
| */ |
| void wait_for_command_complete(struct watchdog *wd_base) |
| { |
| int pending = 1; |
| do { |
| pending = readl(&wd_base->wwps); |
| } while (pending); |
| } |
| |
| /* |
| * Routine: watchdog_init |
| * Description: Shut down watch dogs |
| */ |
| void watchdog_init(void) |
| { |
| struct watchdog *wd2_base = (struct watchdog *)WDT2_BASE; |
| |
| writel(WD_UNLOCK1, &wd2_base->wspr); |
| wait_for_command_complete(wd2_base); |
| writel(WD_UNLOCK2, &wd2_base->wspr); |
| } |
| |
| |
| /* |
| * This function finds the SDRAM size available in the system |
| * based on DMM section configurations |
| * This is needed because the size of memory installed may be |
| * different on different versions of the board |
| */ |
| u32 omap_sdram_size(void) |
| { |
| u32 section, i, valid; |
| u64 sdram_start = 0, sdram_end = 0, addr, |
| size, total_size = 0, trap_size = 0, trap_start = 0; |
| |
| for (i = 0; i < 4; i++) { |
| section = __raw_readl(DMM_BASE + i*4); |
| valid = (section & EMIF_SDRC_ADDRSPC_MASK) >> |
| (EMIF_SDRC_ADDRSPC_SHIFT); |
| addr = section & EMIF_SYS_ADDR_MASK; |
| |
| /* See if the address is valid */ |
| if ((addr >= TI_ARMV7_DRAM_ADDR_SPACE_START) && |
| (addr < TI_ARMV7_DRAM_ADDR_SPACE_END)) { |
| size = ((section & EMIF_SYS_SIZE_MASK) >> |
| EMIF_SYS_SIZE_SHIFT); |
| size = 1 << size; |
| size *= SZ_16M; |
| |
| if (valid != DMM_SDRC_ADDR_SPC_INVALID) { |
| if (!sdram_start || (addr < sdram_start)) |
| sdram_start = addr; |
| if (!sdram_end || ((addr + size) > sdram_end)) |
| sdram_end = addr + size; |
| } else { |
| trap_size = size; |
| trap_start = addr; |
| } |
| } |
| } |
| |
| if ((trap_start >= sdram_start) && (trap_start < sdram_end)) |
| total_size = (sdram_end - sdram_start) - (trap_size); |
| else |
| total_size = sdram_end - sdram_start; |
| |
| return total_size; |
| } |
| |
| |
| /* |
| * Routine: dram_init |
| * Description: sets uboots idea of sdram size |
| */ |
| int dram_init(void) |
| { |
| sdram_init(); |
| gd->ram_size = omap_sdram_size(); |
| return 0; |
| } |
| |
| /* |
| * Print board information |
| */ |
| int checkboard(void) |
| { |
| puts(sysinfo.board_string); |
| return 0; |
| } |
| |
| /* |
| * get_device_type(): tell if GP/HS/EMU/TST |
| */ |
| u32 get_device_type(void) |
| { |
| return (readl((*ctrl)->control_status) & |
| (DEVICE_TYPE_MASK)) >> DEVICE_TYPE_SHIFT; |
| } |
| |
| #if defined(CONFIG_DISPLAY_CPUINFO) |
| /* |
| * Print CPU information |
| */ |
| int print_cpuinfo(void) |
| { |
| puts("CPU : "); |
| omap_rev_string(); |
| |
| return 0; |
| } |
| #endif |