| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2007-2011 |
| * Allwinner Technology Co., Ltd. <www.allwinnertech.com> |
| * Tom Cubie <tangliang@allwinnertech.com> |
| */ |
| |
| #include <common.h> |
| #include <init.h> |
| #include <time.h> |
| #include <asm/global_data.h> |
| #include <asm/io.h> |
| #include <asm/arch/timer.h> |
| #include <linux/delay.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define TIMER_MODE (0x0 << 7) /* continuous mode */ |
| #define TIMER_DIV (0x0 << 4) /* pre scale 1 */ |
| #define TIMER_SRC (0x1 << 2) /* osc24m */ |
| #define TIMER_RELOAD (0x1 << 1) /* reload internal value */ |
| #define TIMER_EN (0x1 << 0) /* enable timer */ |
| |
| #define TIMER_CLOCK (24 * 1000 * 1000) |
| #define COUNT_TO_USEC(x) ((x) / 24) |
| #define USEC_TO_COUNT(x) ((x) * 24) |
| #define TICKS_PER_HZ (TIMER_CLOCK / CONFIG_SYS_HZ) |
| #define TICKS_TO_HZ(x) ((x) / TICKS_PER_HZ) |
| |
| #define TIMER_LOAD_VAL 0xffffffff |
| |
| #define TIMER_NUM 0 /* we use timer 0 */ |
| |
| /* read the 32-bit timer */ |
| static ulong read_timer(void) |
| { |
| struct sunxi_timer_reg *timers = |
| (struct sunxi_timer_reg *)SUNXI_TIMER_BASE; |
| struct sunxi_timer *timer = &timers->timer[TIMER_NUM]; |
| |
| /* |
| * The hardware timer counts down, therefore we invert to |
| * produce an incrementing timer. |
| */ |
| return ~readl(&timer->val); |
| } |
| |
| /* init timer register */ |
| int timer_init(void) |
| { |
| struct sunxi_timer_reg *timers = |
| (struct sunxi_timer_reg *)SUNXI_TIMER_BASE; |
| struct sunxi_timer *timer = &timers->timer[TIMER_NUM]; |
| writel(TIMER_LOAD_VAL, &timer->inter); |
| writel(TIMER_MODE | TIMER_DIV | TIMER_SRC | TIMER_RELOAD | TIMER_EN, |
| &timer->ctl); |
| |
| return 0; |
| } |
| |
| /* timer without interrupts */ |
| static ulong get_timer_masked(void) |
| { |
| /* current tick value */ |
| ulong now = TICKS_TO_HZ(read_timer()); |
| |
| if (now >= gd->arch.lastinc) /* normal (non rollover) */ |
| gd->arch.tbl += (now - gd->arch.lastinc); |
| else { |
| /* rollover */ |
| gd->arch.tbl += (TICKS_TO_HZ(TIMER_LOAD_VAL) |
| - gd->arch.lastinc) + now; |
| } |
| gd->arch.lastinc = now; |
| |
| return gd->arch.tbl; |
| } |
| |
| ulong get_timer(ulong base) |
| { |
| return get_timer_masked() - base; |
| } |
| |
| /* delay x useconds */ |
| void __udelay(unsigned long usec) |
| { |
| long tmo = USEC_TO_COUNT(usec); |
| ulong now, last = read_timer(); |
| |
| while (tmo > 0) { |
| now = read_timer(); |
| if (now > last) /* normal (non rollover) */ |
| tmo -= now - last; |
| else /* rollover */ |
| tmo -= TIMER_LOAD_VAL - last + now; |
| last = now; |
| } |
| } |
| |
| /* |
| * This function is derived from PowerPC code (read timebase as long long). |
| * On ARM it just returns the timer value. |
| */ |
| unsigned long long get_ticks(void) |
| { |
| return get_timer(0); |
| } |
| |
| /* |
| * This function is derived from PowerPC code (timebase clock frequency). |
| * On ARM it returns the number of timer ticks per second. |
| */ |
| ulong get_tbclk(void) |
| { |
| return CONFIG_SYS_HZ; |
| } |