| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com> |
| */ |
| |
| #include <common.h> |
| #include <cpu_func.h> |
| #include <event.h> |
| #include <init.h> |
| #include <mmc.h> |
| #include <asm/cache.h> |
| #include <asm/io.h> |
| #include <asm/ioapic.h> |
| #include <asm/irq.h> |
| #include <asm/mrccache.h> |
| #include <asm/mtrr.h> |
| #include <asm/pci.h> |
| #include <asm/post.h> |
| #include <asm/arch/device.h> |
| #include <asm/arch/msg_port.h> |
| #include <asm/arch/quark.h> |
| #include <linux/delay.h> |
| |
| static void quark_setup_mtrr(void) |
| { |
| u32 base, mask; |
| int i; |
| |
| disable_caches(); |
| |
| /* mark the VGA RAM area as uncacheable */ |
| msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_16K_A0000, |
| MTRR_FIX_TYPE(MTRR_TYPE_UNCACHEABLE)); |
| msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_16K_B0000, |
| MTRR_FIX_TYPE(MTRR_TYPE_UNCACHEABLE)); |
| |
| /* mark other fixed range areas as cacheable */ |
| msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_64K_00000, |
| MTRR_FIX_TYPE(MTRR_TYPE_WRBACK)); |
| msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_64K_40000, |
| MTRR_FIX_TYPE(MTRR_TYPE_WRBACK)); |
| msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_16K_80000, |
| MTRR_FIX_TYPE(MTRR_TYPE_WRBACK)); |
| msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_16K_90000, |
| MTRR_FIX_TYPE(MTRR_TYPE_WRBACK)); |
| for (i = MTRR_FIX_4K_C0000; i <= MTRR_FIX_4K_FC000; i++) |
| msg_port_write(MSG_PORT_HOST_BRIDGE, i, |
| MTRR_FIX_TYPE(MTRR_TYPE_WRBACK)); |
| |
| /* variable range MTRR#0: ROM area */ |
| mask = ~(CONFIG_SYS_MONITOR_LEN - 1); |
| base = CONFIG_TEXT_BASE & mask; |
| msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_VAR_PHYBASE(MTRR_VAR_ROM), |
| base | MTRR_TYPE_WRBACK); |
| msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_VAR_PHYMASK(MTRR_VAR_ROM), |
| mask | MTRR_PHYS_MASK_VALID); |
| |
| /* variable range MTRR#1: eSRAM area */ |
| mask = ~(ESRAM_SIZE - 1); |
| base = CONFIG_ESRAM_BASE & mask; |
| msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_VAR_PHYBASE(MTRR_VAR_ESRAM), |
| base | MTRR_TYPE_WRBACK); |
| msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_VAR_PHYMASK(MTRR_VAR_ESRAM), |
| mask | MTRR_PHYS_MASK_VALID); |
| |
| /* enable both variable and fixed range MTRRs */ |
| msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_DEF_TYPE, |
| MTRR_DEF_TYPE_EN | MTRR_DEF_TYPE_FIX_EN); |
| |
| enable_caches(); |
| } |
| |
| static void quark_setup_bars(void) |
| { |
| /* GPIO - D31:F0:R44h */ |
| qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_GBA, |
| CONFIG_GPIO_BASE | IO_BAR_EN); |
| |
| /* ACPI PM1 Block - D31:F0:R48h */ |
| qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_PM1BLK, |
| CONFIG_ACPI_PM1_BASE | IO_BAR_EN); |
| |
| /* GPE0 - D31:F0:R4Ch */ |
| qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_GPE0BLK, |
| CONFIG_ACPI_GPE0_BASE | IO_BAR_EN); |
| |
| /* WDT - D31:F0:R84h */ |
| qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_WDTBA, |
| CONFIG_WDT_BASE | IO_BAR_EN); |
| |
| /* RCBA - D31:F0:RF0h */ |
| qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_RCBA, |
| CONFIG_RCBA_BASE | MEM_BAR_EN); |
| |
| /* ACPI P Block - Msg Port 04:R70h */ |
| msg_port_write(MSG_PORT_RMU, PBLK_BA, |
| CONFIG_ACPI_PBLK_BASE | IO_BAR_EN); |
| |
| /* SPI DMA - Msg Port 04:R7Ah */ |
| msg_port_write(MSG_PORT_RMU, SPI_DMA_BA, |
| CONFIG_SPI_DMA_BASE | IO_BAR_EN); |
| |
| /* PCIe ECAM */ |
| msg_port_write(MSG_PORT_MEM_ARBITER, AEC_CTRL, |
| CONFIG_PCIE_ECAM_BASE | MEM_BAR_EN); |
| msg_port_write(MSG_PORT_HOST_BRIDGE, HEC_REG, |
| CONFIG_PCIE_ECAM_BASE | MEM_BAR_EN); |
| } |
| |
| static void quark_pcie_early_init(void) |
| { |
| /* |
| * Step1: Assert PCIe signal PERST# |
| * |
| * The CPU interface to the PERST# signal is platform dependent. |
| * Call the board-specific codes to perform this task. |
| */ |
| board_assert_perst(); |
| |
| /* Step2: PHY common lane reset */ |
| msg_port_alt_setbits(MSG_PORT_SOC_UNIT, PCIE_CFG, PCIE_PHY_LANE_RST); |
| /* wait 1 ms for PHY common lane reset */ |
| mdelay(1); |
| |
| /* Step3: PHY sideband interface reset and controller main reset */ |
| msg_port_alt_setbits(MSG_PORT_SOC_UNIT, PCIE_CFG, |
| PCIE_PHY_SB_RST | PCIE_CTLR_MAIN_RST); |
| /* wait 80ms for PLL to lock */ |
| mdelay(80); |
| |
| /* Step4: Controller sideband interface reset */ |
| msg_port_alt_setbits(MSG_PORT_SOC_UNIT, PCIE_CFG, PCIE_CTLR_SB_RST); |
| /* wait 20ms for controller sideband interface reset */ |
| mdelay(20); |
| |
| /* Step5: De-assert PERST# */ |
| board_deassert_perst(); |
| |
| /* Step6: Controller primary interface reset */ |
| msg_port_alt_setbits(MSG_PORT_SOC_UNIT, PCIE_CFG, PCIE_CTLR_PRI_RST); |
| |
| /* Mixer Load Lane 0 */ |
| msg_port_io_clrbits(MSG_PORT_PCIE_AFE, PCIE_RXPICTRL0_L0, |
| (1 << 6) | (1 << 7)); |
| |
| /* Mixer Load Lane 1 */ |
| msg_port_io_clrbits(MSG_PORT_PCIE_AFE, PCIE_RXPICTRL0_L1, |
| (1 << 6) | (1 << 7)); |
| } |
| |
| static void quark_usb_early_init(void) |
| { |
| /* The sequence below comes from Quark firmware writer guide */ |
| |
| msg_port_alt_clrsetbits(MSG_PORT_USB_AFE, USB2_GLOBAL_PORT, |
| 1 << 1, (1 << 6) | (1 << 7)); |
| |
| msg_port_alt_clrsetbits(MSG_PORT_USB_AFE, USB2_COMPBG, |
| (1 << 8) | (1 << 9), (1 << 7) | (1 << 10)); |
| |
| msg_port_alt_setbits(MSG_PORT_USB_AFE, USB2_PLL2, 1 << 29); |
| |
| msg_port_alt_setbits(MSG_PORT_USB_AFE, USB2_PLL1, 1 << 1); |
| |
| msg_port_alt_clrsetbits(MSG_PORT_USB_AFE, USB2_PLL1, |
| (1 << 3) | (1 << 4) | (1 << 5), 1 << 6); |
| |
| msg_port_alt_clrbits(MSG_PORT_USB_AFE, USB2_PLL2, 1 << 29); |
| |
| msg_port_alt_setbits(MSG_PORT_USB_AFE, USB2_PLL2, 1 << 24); |
| } |
| |
| static void quark_thermal_early_init(void) |
| { |
| /* The sequence below comes from Quark firmware writer guide */ |
| |
| /* thermal sensor mode config */ |
| msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG1, |
| (1 << 3) | (1 << 4) | (1 << 5), 1 << 5); |
| msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG1, |
| (1 << 8) | (1 << 9) | (1 << 10) | (1 << 11) | |
| (1 << 12), 1 << 9); |
| msg_port_alt_setbits(MSG_PORT_SOC_UNIT, TS_CFG1, 1 << 14); |
| msg_port_alt_clrbits(MSG_PORT_SOC_UNIT, TS_CFG1, 1 << 17); |
| msg_port_alt_clrbits(MSG_PORT_SOC_UNIT, TS_CFG1, 1 << 18); |
| msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG2, 0xffff, 0x011f); |
| msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG3, 0xff, 0x17); |
| msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG3, |
| (1 << 8) | (1 << 9), 1 << 8); |
| msg_port_alt_clrbits(MSG_PORT_SOC_UNIT, TS_CFG3, 0xff000000); |
| msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG4, |
| 0x7ff800, 0xc8 << 11); |
| |
| /* thermal monitor catastrophic trip set point (105 celsius) */ |
| msg_port_clrsetbits(MSG_PORT_RMU, TS_TRIP, 0xff, 155); |
| |
| /* thermal monitor catastrophic trip clear point (0 celsius) */ |
| msg_port_clrsetbits(MSG_PORT_RMU, TS_TRIP, 0xff0000, 50 << 16); |
| |
| /* take thermal sensor out of reset */ |
| msg_port_alt_clrbits(MSG_PORT_SOC_UNIT, TS_CFG4, 1 << 0); |
| |
| /* enable thermal monitor */ |
| msg_port_setbits(MSG_PORT_RMU, TS_MODE, 1 << 15); |
| |
| /* lock all thermal configuration */ |
| msg_port_setbits(MSG_PORT_RMU, RMU_CTRL, (1 << 5) | (1 << 6)); |
| } |
| |
| static void quark_enable_legacy_seg(void) |
| { |
| msg_port_setbits(MSG_PORT_HOST_BRIDGE, HMISC2, |
| HMISC2_SEGE | HMISC2_SEGF | HMISC2_SEGAB); |
| } |
| |
| int arch_cpu_init(void) |
| { |
| int ret; |
| |
| post_code(POST_CPU_INIT); |
| |
| ret = x86_cpu_init_f(); |
| if (ret) |
| return ret; |
| |
| /* |
| * Quark SoC does not support MSR MTRRs. Fixed and variable range MTRRs |
| * are accessed indirectly via the message port and not the traditional |
| * MSR mechanism. Only UC, WT and WB cache types are supported. |
| */ |
| quark_setup_mtrr(); |
| |
| /* |
| * Quark SoC has some non-standard BARs (excluding PCI standard BARs) |
| * which need be initialized with suggested values |
| */ |
| quark_setup_bars(); |
| |
| /* Initialize USB2 PHY */ |
| quark_usb_early_init(); |
| |
| /* Initialize thermal sensor */ |
| quark_thermal_early_init(); |
| |
| /* Turn on legacy segments (A/B/E/F) decode to system RAM */ |
| quark_enable_legacy_seg(); |
| |
| return 0; |
| } |
| |
| static int quark_init_pcie(void *ctx, struct event *event) |
| { |
| /* |
| * Initialize PCIe controller |
| * |
| * Quark SoC holds the PCIe controller in reset following a power on. |
| * U-Boot needs to release the PCIe controller from reset. The PCIe |
| * controller (D23:F0/F1) will not be visible in PCI configuration |
| * space and any access to its PCI configuration registers will cause |
| * system hang while it is held in reset. |
| */ |
| quark_pcie_early_init(); |
| |
| return 0; |
| } |
| EVENT_SPY(EVT_DM_POST_INIT, quark_init_pcie); |
| |
| int checkcpu(void) |
| { |
| return 0; |
| } |
| |
| int print_cpuinfo(void) |
| { |
| post_code(POST_CPU_INFO); |
| return default_print_cpuinfo(); |
| } |
| |
| static void quark_pcie_init(void) |
| { |
| u32 val; |
| |
| /* PCIe upstream non-posted & posted request size */ |
| qrk_pci_write_config_dword(QUARK_PCIE0, PCIE_RP_CCFG, |
| CCFG_UPRS | CCFG_UNRS); |
| qrk_pci_write_config_dword(QUARK_PCIE1, PCIE_RP_CCFG, |
| CCFG_UPRS | CCFG_UNRS); |
| |
| /* PCIe packet fast transmit mode (IPF) */ |
| qrk_pci_write_config_dword(QUARK_PCIE0, PCIE_RP_MPC2, MPC2_IPF); |
| qrk_pci_write_config_dword(QUARK_PCIE1, PCIE_RP_MPC2, MPC2_IPF); |
| |
| /* PCIe message bus idle counter (SBIC) */ |
| qrk_pci_read_config_dword(QUARK_PCIE0, PCIE_RP_MBC, &val); |
| val |= MBC_SBIC; |
| qrk_pci_write_config_dword(QUARK_PCIE0, PCIE_RP_MBC, val); |
| qrk_pci_read_config_dword(QUARK_PCIE1, PCIE_RP_MBC, &val); |
| val |= MBC_SBIC; |
| qrk_pci_write_config_dword(QUARK_PCIE1, PCIE_RP_MBC, val); |
| } |
| |
| static void quark_usb_init(void) |
| { |
| u32 bar; |
| |
| /* Change USB EHCI packet buffer OUT/IN threshold */ |
| qrk_pci_read_config_dword(QUARK_USB_EHCI, PCI_BASE_ADDRESS_0, &bar); |
| writel((0x7f << 16) | 0x7f, bar + EHCI_INSNREG01); |
| |
| /* Disable USB device interrupts */ |
| qrk_pci_read_config_dword(QUARK_USB_DEVICE, PCI_BASE_ADDRESS_0, &bar); |
| writel(0x7f, bar + USBD_INT_MASK); |
| writel((0xf << 16) | 0xf, bar + USBD_EP_INT_MASK); |
| writel((0xf << 16) | 0xf, bar + USBD_EP_INT_STS); |
| } |
| |
| static void quark_irq_init(void) |
| { |
| struct quark_rcba *rcba; |
| u32 base; |
| |
| qrk_pci_read_config_dword(QUARK_LEGACY_BRIDGE, LB_RCBA, &base); |
| base &= ~MEM_BAR_EN; |
| rcba = (struct quark_rcba *)base; |
| |
| /* |
| * Route Quark PCI device interrupt pin to PIRQ |
| * |
| * Route device#23's INTA/B/C/D to PIRQA/B/C/D |
| * Route device#20,21's INTA/B/C/D to PIRQE/F/G/H |
| */ |
| writew(PIRQC, &rcba->rmu_ir); |
| writew(PIRQA | (PIRQB << 4) | (PIRQC << 8) | (PIRQD << 12), |
| &rcba->d23_ir); |
| writew(PIRQD, &rcba->core_ir); |
| writew(PIRQE | (PIRQF << 4) | (PIRQG << 8) | (PIRQH << 12), |
| &rcba->d20d21_ir); |
| } |
| |
| int arch_early_init_r(void) |
| { |
| quark_pcie_init(); |
| |
| quark_usb_init(); |
| |
| quark_irq_init(); |
| |
| return 0; |
| } |
| |
| int arch_misc_init(void) |
| { |
| #ifdef CONFIG_ENABLE_MRC_CACHE |
| /* |
| * We intend not to check any return value here, as even MRC cache |
| * is not saved successfully, it is not a severe error that will |
| * prevent system from continuing to boot. |
| */ |
| mrccache_save(); |
| #endif |
| |
| /* Assign a unique I/O APIC ID */ |
| io_apic_set_id(1); |
| |
| return 0; |
| } |
| |
| void board_final_init(void) |
| { |
| struct quark_rcba *rcba; |
| u32 base, val; |
| |
| qrk_pci_read_config_dword(QUARK_LEGACY_BRIDGE, LB_RCBA, &base); |
| base &= ~MEM_BAR_EN; |
| rcba = (struct quark_rcba *)base; |
| |
| /* Initialize 'Component ID' to zero */ |
| val = readl(&rcba->esd); |
| val &= ~0xff0000; |
| writel(val, &rcba->esd); |
| |
| /* Lock HMBOUND for security */ |
| msg_port_setbits(MSG_PORT_HOST_BRIDGE, HM_BOUND, HM_BOUND_LOCK); |
| |
| return; |
| } |