| /* |
| * Copyright (C) 2012-2015 Panasonic Corporation |
| * Copyright (C) 2015-2016 Socionext Inc. |
| * Author: Masahiro Yamada <yamada.masahiro@socionext.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| /* U-Boot - Common settings for UniPhier Family */ |
| |
| #ifndef __CONFIG_UNIPHIER_COMMON_H__ |
| #define __CONFIG_UNIPHIER_COMMON_H__ |
| |
| #define CONFIG_ARMV7_PSCI_1_0 |
| |
| #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 |
| |
| #define CONFIG_SMC911X |
| |
| /* dummy: referenced by examples/standalone/smc911x_eeprom.c */ |
| #define CONFIG_SMC911X_BASE 0 |
| #define CONFIG_SMC911X_32_BIT |
| |
| /*----------------------------------------------------------------------- |
| * MMU and Cache Setting |
| *----------------------------------------------------------------------*/ |
| |
| /* Comment out the following to enable L1 cache */ |
| /* #define CONFIG_SYS_ICACHE_OFF */ |
| /* #define CONFIG_SYS_DCACHE_OFF */ |
| |
| #define CONFIG_DISPLAY_CPUINFO |
| #define CONFIG_DISPLAY_BOARDINFO |
| #define CONFIG_BOARD_LATE_INIT |
| |
| #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) |
| |
| #define CONFIG_TIMESTAMP |
| |
| /* FLASH related */ |
| #define CONFIG_MTD_DEVICE |
| |
| /* |
| * uncomment the following to disable FLASH related code. |
| */ |
| /* #define CONFIG_SYS_NO_FLASH */ |
| |
| #define CONFIG_FLASH_CFI_DRIVER |
| #define CONFIG_SYS_FLASH_CFI |
| |
| #define CONFIG_SYS_MAX_FLASH_SECT 256 |
| #define CONFIG_SYS_MONITOR_BASE 0 |
| #define CONFIG_SYS_MONITOR_LEN 0x00080000 /* 512KB */ |
| #define CONFIG_SYS_FLASH_BASE 0 |
| |
| /* |
| * flash_toggle does not work for out supoort card. |
| * We need to use flash_status_poll. |
| */ |
| #define CONFIG_SYS_CFI_FLASH_STATUS_POLL |
| |
| #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ |
| |
| #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1 |
| |
| /* serial console configuration */ |
| #define CONFIG_BAUDRATE 115200 |
| |
| #if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_ARM64) |
| #define CONFIG_USE_ARCH_MEMSET |
| #define CONFIG_USE_ARCH_MEMCPY |
| #endif |
| |
| #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
| |
| #define CONFIG_CMDLINE_EDITING /* add command line history */ |
| #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ |
| /* Print Buffer Size */ |
| #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) |
| #define CONFIG_SYS_MAXARGS 16 /* max number of command */ |
| /* Boot Argument Buffer Size */ |
| #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) |
| |
| #define CONFIG_CONS_INDEX 1 |
| |
| /* #define CONFIG_ENV_IS_NOWHERE */ |
| /* #define CONFIG_ENV_IS_IN_NAND */ |
| #define CONFIG_ENV_IS_IN_MMC |
| #define CONFIG_ENV_OFFSET 0x80000 |
| #define CONFIG_ENV_SIZE 0x2000 |
| /* #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */ |
| |
| #define CONFIG_SYS_MMC_ENV_DEV 0 |
| #define CONFIG_SYS_MMC_ENV_PART 1 |
| |
| #ifdef CONFIG_ARM64 |
| #define CPU_RELEASE_ADDR 0x80000000 |
| #define COUNTER_FREQUENCY 50000000 |
| #define CONFIG_GICV3 |
| #define GICD_BASE 0x5fe00000 |
| #if defined(CONFIG_ARCH_UNIPHIER_LD11) |
| #define GICR_BASE 0x5fe40000 |
| #elif defined(CONFIG_ARCH_UNIPHIER_LD20) |
| #define GICR_BASE 0x5fe80000 |
| #endif |
| #else |
| /* Time clock 1MHz */ |
| #define CONFIG_SYS_TIMER_RATE 1000000 |
| #endif |
| |
| |
| #define CONFIG_SYS_MAX_NAND_DEVICE 1 |
| #define CONFIG_SYS_NAND_MAX_CHIPS 2 |
| #define CONFIG_SYS_NAND_ONFI_DETECTION |
| |
| #define CONFIG_NAND_DENALI_ECC_SIZE 1024 |
| |
| #ifdef CONFIG_ARCH_UNIPHIER_SLD3 |
| #define CONFIG_SYS_NAND_REGS_BASE 0xf8100000 |
| #define CONFIG_SYS_NAND_DATA_BASE 0xf8000000 |
| #else |
| #define CONFIG_SYS_NAND_REGS_BASE 0x68100000 |
| #define CONFIG_SYS_NAND_DATA_BASE 0x68000000 |
| #endif |
| |
| #define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_DATA_BASE + 0x10) |
| |
| #define CONFIG_SYS_NAND_USE_FLASH_BBT |
| #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 |
| |
| /* USB */ |
| #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 |
| #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 4 |
| #define CONFIG_FAT_WRITE |
| #define CONFIG_DOS_PARTITION |
| |
| /* SD/MMC */ |
| #define CONFIG_SUPPORT_EMMC_BOOT |
| #define CONFIG_GENERIC_MMC |
| |
| /* memtest works on */ |
| #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE |
| #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01000000) |
| |
| /* |
| * Network Configuration |
| */ |
| #define CONFIG_SERVERIP 192.168.11.1 |
| #define CONFIG_IPADDR 192.168.11.10 |
| #define CONFIG_GATEWAYIP 192.168.11.1 |
| #define CONFIG_NETMASK 255.255.255.0 |
| |
| #define CONFIG_LOADADDR 0x84000000 |
| #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR |
| |
| #define CONFIG_CMDLINE_EDITING /* add command line history */ |
| |
| #define CONFIG_BOOTCOMMAND "run $bootmode" |
| |
| #define CONFIG_ROOTPATH "/nfs/root/path" |
| #define CONFIG_NFSBOOTCOMMAND \ |
| "setenv bootargs $bootargs root=/dev/nfs rw " \ |
| "nfsroot=$serverip:$rootpath " \ |
| "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \ |
| "run __nfsboot" |
| |
| #ifdef CONFIG_FIT |
| #define CONFIG_BOOTFILE "fitImage" |
| #define LINUXBOOT_ENV_SETTINGS \ |
| "fit_addr=0x00100000\0" \ |
| "fit_addr_r=0x84100000\0" \ |
| "fit_size=0x00f00000\0" \ |
| "norboot=setexpr fit_addr $nor_base + $fit_addr &&" \ |
| "bootm $fit_addr\0" \ |
| "nandboot=nand read $fit_addr_r $fit_addr $fit_size &&" \ |
| "bootm $fit_addr_r\0" \ |
| "tftpboot=tftpboot $fit_addr_r $bootfile &&" \ |
| "bootm $fit_addr_r\0" \ |
| "__nfsboot=run tftpboot\0" |
| #else |
| #ifdef CONFIG_ARM64 |
| #define CONFIG_BOOTFILE "Image" |
| #define LINUXBOOT_CMD "booti" |
| #define KERNEL_ADDR_R "kernel_addr_r=0x80080000\0" |
| #define KERNEL_SIZE "kernel_size=0x00c00000\0" |
| #define RAMDISK_ADDR "ramdisk_addr=0x00e00000\0" |
| #else |
| #define CONFIG_BOOTFILE "zImage" |
| #define LINUXBOOT_CMD "bootz" |
| #define KERNEL_ADDR_R "kernel_addr_r=0x80208000\0" |
| #define KERNEL_SIZE "kernel_size=0x00800000\0" |
| #define RAMDISK_ADDR "ramdisk_addr=0x00a00000\0" |
| #endif |
| #define LINUXBOOT_ENV_SETTINGS \ |
| "fdt_addr=0x00100000\0" \ |
| "fdt_addr_r=0x84100000\0" \ |
| "fdt_size=0x00008000\0" \ |
| "kernel_addr=0x00200000\0" \ |
| KERNEL_ADDR_R \ |
| KERNEL_SIZE \ |
| RAMDISK_ADDR \ |
| "ramdisk_addr_r=0x84a00000\0" \ |
| "ramdisk_size=0x00600000\0" \ |
| "ramdisk_file=rootfs.cpio.uboot\0" \ |
| "boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 &&" \ |
| LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \ |
| "norboot=setexpr kernel_addr $nor_base + $kernel_addr &&" \ |
| "setexpr kernel_size $kernel_size / 4 &&" \ |
| "cp $kernel_addr $kernel_addr_r $kernel_size &&" \ |
| "setexpr ramdisk_addr_r $nor_base + $ramdisk_addr &&" \ |
| "setexpr fdt_addr_r $nor_base + $fdt_addr &&" \ |
| "run boot_common\0" \ |
| "nandboot=nand read $kernel_addr_r $kernel_addr $kernel_size &&" \ |
| "nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \ |
| "nand read $fdt_addr_r $fdt_addr $fdt_size &&" \ |
| "run boot_common\0" \ |
| "tftpboot=tftpboot $kernel_addr_r $bootfile &&" \ |
| "tftpboot $ramdisk_addr_r $ramdisk_file &&" \ |
| "tftpboot $fdt_addr_r $fdt_file &&" \ |
| "run boot_common\0" \ |
| "__nfsboot=tftpboot $kernel_addr_r $bootfile &&" \ |
| "tftpboot $fdt_addr_r $fdt_file &&" \ |
| "setenv ramdisk_addr_r - &&" \ |
| "run boot_common\0" |
| #endif |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "netdev=eth0\0" \ |
| "verify=n\0" \ |
| "nor_base=0x42000000\0" \ |
| "sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&" \ |
| "tftpboot $tmp_addr u-boot-spl.bin &&" \ |
| "setexpr tmp_addr $nor_base + 0x60000 &&" \ |
| "tftpboot $tmp_addr u-boot.bin\0" \ |
| "emmcupdate=mmcsetn &&" \ |
| "mmc partconf $mmc_first_dev 0 1 1 &&" \ |
| "tftpboot u-boot-spl.bin &&" \ |
| "mmc write $loadaddr 0 80 &&" \ |
| "tftpboot u-boot.bin &&" \ |
| "mmc write $loadaddr 80 780\0" \ |
| "nandupdate=nand erase 0 0x00100000 &&" \ |
| "tftpboot u-boot-spl.bin &&" \ |
| "nand write $loadaddr 0 0x00010000 &&" \ |
| "tftpboot u-boot.bin &&" \ |
| "nand write $loadaddr 0x00010000 0x000f0000\0" \ |
| LINUXBOOT_ENV_SETTINGS |
| |
| #define CONFIG_SYS_BOOTMAPSZ 0x20000000 |
| |
| #define CONFIG_SYS_SDRAM_BASE 0x80000000 |
| #define CONFIG_NR_DRAM_BANKS 2 |
| /* for LD20; the last 64 byte is used for dynamic DDR PHY training */ |
| #define CONFIG_SYS_MEM_TOP_HIDE 64 |
| |
| #if defined(CONFIG_ARM64) |
| #define CONFIG_SPL_TEXT_BASE 0x30000000 |
| #elif defined(CONFIG_ARCH_UNIPHIER_SLD3) || \ |
| defined(CONFIG_ARCH_UNIPHIER_LD4) || \ |
| defined(CONFIG_ARCH_UNIPHIER_SLD8) |
| #define CONFIG_SPL_TEXT_BASE 0x00040000 |
| #else |
| #define CONFIG_SPL_TEXT_BASE 0x00100000 |
| #endif |
| |
| #if defined(CONFIG_ARCH_UNIPHIER_LD11) |
| #define CONFIG_SPL_STACK (0x30014c00) |
| #elif defined(CONFIG_ARCH_UNIPHIER_LD20) |
| #define CONFIG_SPL_STACK (0x3001c000) |
| #else |
| #define CONFIG_SPL_STACK (0x00100000) |
| #endif |
| #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE) |
| |
| #define CONFIG_PANIC_HANG |
| |
| #define CONFIG_SPL_FRAMEWORK |
| #define CONFIG_SPL_SERIAL_SUPPORT |
| #define CONFIG_SPL_NOR_SUPPORT |
| #ifdef CONFIG_ARM64 |
| #define CONFIG_SPL_BOARD_LOAD_IMAGE |
| #else |
| #define CONFIG_SPL_NAND_SUPPORT |
| #define CONFIG_SPL_MMC_SUPPORT |
| #endif |
| |
| #define CONFIG_SPL_LIBCOMMON_SUPPORT /* for mem_malloc_init */ |
| #define CONFIG_SPL_LIBGENERIC_SUPPORT |
| |
| #define CONFIG_SPL_BOARD_INIT |
| |
| #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x10000 |
| |
| /* subtract sizeof(struct image_header) */ |
| #define CONFIG_SYS_UBOOT_BASE (0x60000 - 0x40) |
| #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x80 |
| |
| #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" |
| #define CONFIG_SPL_MAX_FOOTPRINT 0x10000 |
| #define CONFIG_SPL_MAX_SIZE 0x10000 |
| #if defined(CONFIG_ARCH_UNIPHIER_LD11) |
| #define CONFIG_SPL_BSS_START_ADDR 0x30012000 |
| #elif defined(CONFIG_ARCH_UNIPHIER_LD20) |
| #define CONFIG_SPL_BSS_START_ADDR 0x30016000 |
| #endif |
| #define CONFIG_SPL_BSS_MAX_SIZE 0x2000 |
| |
| #endif /* __CONFIG_UNIPHIER_COMMON_H__ */ |