| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Layerscape DWC3 Glue layer |
| * |
| * Copyright (C) 2021 Michael Walle <michael@walle.cc> |
| * |
| * Based on dwc3-generic.c. |
| */ |
| |
| #include <dm.h> |
| #include <dm/device_compat.h> |
| #include <dm/device-internal.h> |
| #include <dm/lists.h> |
| #include <dwc3-uboot.h> |
| #include <linux/usb/gadget.h> |
| #include <usb.h> |
| #include "core.h" |
| #include "gadget.h" |
| #include <usb/xhci.h> |
| |
| struct dwc3_layerscape_plat { |
| fdt_addr_t base; |
| u32 maximum_speed; |
| enum usb_dr_mode dr_mode; |
| }; |
| |
| struct dwc3_layerscape_priv { |
| void *base; |
| struct dwc3 dwc3; |
| struct phy_bulk phys; |
| }; |
| |
| struct dwc3_layerscape_host_priv { |
| struct xhci_ctrl xhci_ctrl; |
| struct dwc3_layerscape_priv gen_priv; |
| }; |
| |
| static int dwc3_layerscape_probe(struct udevice *dev, |
| struct dwc3_layerscape_priv *priv) |
| { |
| int rc; |
| struct dwc3_layerscape_plat *plat = dev_get_plat(dev); |
| struct dwc3 *dwc3 = &priv->dwc3; |
| |
| dwc3->dev = dev; |
| dwc3->maximum_speed = plat->maximum_speed; |
| dwc3->dr_mode = plat->dr_mode; |
| if (CONFIG_IS_ENABLED(OF_CONTROL)) |
| dwc3_of_parse(dwc3); |
| |
| rc = dwc3_setup_phy(dev, &priv->phys); |
| if (rc && rc != -ENOTSUPP) |
| return rc; |
| |
| priv->base = map_physmem(plat->base, DWC3_OTG_REGS_END, MAP_NOCACHE); |
| dwc3->regs = priv->base + DWC3_GLOBALS_REGS_START; |
| |
| rc = dwc3_init(dwc3); |
| if (rc) { |
| unmap_physmem(priv->base, MAP_NOCACHE); |
| return rc; |
| } |
| |
| return 0; |
| } |
| |
| static int dwc3_layerscape_remove(struct udevice *dev, |
| struct dwc3_layerscape_priv *priv) |
| { |
| struct dwc3 *dwc3 = &priv->dwc3; |
| |
| dwc3_remove(dwc3); |
| dwc3_shutdown_phy(dev, &priv->phys); |
| unmap_physmem(dwc3->regs, MAP_NOCACHE); |
| |
| return 0; |
| } |
| |
| static int dwc3_layerscape_of_to_plat(struct udevice *dev) |
| { |
| struct dwc3_layerscape_plat *plat = dev_get_plat(dev); |
| ofnode node = dev_ofnode(dev); |
| |
| plat->base = dev_read_addr(dev); |
| |
| plat->maximum_speed = usb_get_maximum_speed(node); |
| if (plat->maximum_speed == USB_SPEED_UNKNOWN) { |
| dev_dbg(dev, "No USB maximum speed specified. Using super speed\n"); |
| plat->maximum_speed = USB_SPEED_SUPER; |
| } |
| |
| plat->dr_mode = usb_get_dr_mode(node); |
| if (plat->dr_mode == USB_DR_MODE_UNKNOWN) { |
| dev_err(dev, "Invalid usb mode setup\n"); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| #if CONFIG_IS_ENABLED(DM_USB_GADGET) |
| int dm_usb_gadget_handle_interrupts(struct udevice *dev) |
| { |
| struct dwc3_layerscape_priv *priv = dev_get_priv(dev); |
| |
| dwc3_gadget_uboot_handle_interrupt(&priv->dwc3); |
| |
| return 0; |
| } |
| |
| static int dwc3_layerscape_peripheral_probe(struct udevice *dev) |
| { |
| struct dwc3_layerscape_priv *priv = dev_get_priv(dev); |
| |
| return dwc3_layerscape_probe(dev, priv); |
| } |
| |
| static int dwc3_layerscape_peripheral_remove(struct udevice *dev) |
| { |
| struct dwc3_layerscape_priv *priv = dev_get_priv(dev); |
| |
| return dwc3_layerscape_remove(dev, priv); |
| } |
| |
| U_BOOT_DRIVER(dwc3_layerscape_peripheral) = { |
| .name = "dwc3-layerscape-peripheral", |
| .id = UCLASS_USB_GADGET_GENERIC, |
| .of_to_plat = dwc3_layerscape_of_to_plat, |
| .probe = dwc3_layerscape_peripheral_probe, |
| .remove = dwc3_layerscape_peripheral_remove, |
| .priv_auto = sizeof(struct dwc3_layerscape_priv), |
| .plat_auto = sizeof(struct dwc3_layerscape_plat), |
| }; |
| #endif |
| |
| #if CONFIG_IS_ENABLED(USB_HOST) |
| static int dwc3_layerscape_host_probe(struct udevice *dev) |
| { |
| struct xhci_hcor *hcor; |
| struct xhci_hccr *hccr; |
| struct dwc3_layerscape_host_priv *priv = dev_get_priv(dev); |
| int rc; |
| |
| rc = dwc3_layerscape_probe(dev, &priv->gen_priv); |
| if (rc) |
| return rc; |
| |
| hccr = priv->gen_priv.base; |
| hcor = priv->gen_priv.base + HC_LENGTH(xhci_readl(&hccr->cr_capbase)); |
| |
| return xhci_register(dev, hccr, hcor); |
| } |
| |
| static int dwc3_layerscape_host_remove(struct udevice *dev) |
| { |
| struct dwc3_layerscape_host_priv *priv = dev_get_priv(dev); |
| int rc; |
| |
| rc = xhci_deregister(dev); |
| if (rc) |
| return rc; |
| |
| return dwc3_layerscape_remove(dev, &priv->gen_priv); |
| } |
| |
| U_BOOT_DRIVER(dwc3_layerscape_host) = { |
| .name = "dwc3-layerscape-host", |
| .id = UCLASS_USB, |
| .of_to_plat = dwc3_layerscape_of_to_plat, |
| .probe = dwc3_layerscape_host_probe, |
| .remove = dwc3_layerscape_host_remove, |
| .priv_auto = sizeof(struct dwc3_layerscape_host_priv), |
| .plat_auto = sizeof(struct dwc3_layerscape_plat), |
| .ops = &xhci_usb_ops, |
| .flags = DM_FLAG_ALLOC_PRIV_DMA, |
| }; |
| #endif |
| |
| static int dwc3_layerscape_bind(struct udevice *dev) |
| { |
| ofnode node = dev_ofnode(dev); |
| const char *name = ofnode_get_name(node); |
| enum usb_dr_mode dr_mode; |
| char *driver; |
| |
| dr_mode = usb_get_dr_mode(node); |
| |
| switch (dr_mode) { |
| #if CONFIG_IS_ENABLED(DM_USB_GADGET) |
| case USB_DR_MODE_PERIPHERAL: |
| dev_dbg(dev, "Using peripheral mode\n"); |
| driver = "dwc3-layerscape-peripheral"; |
| break; |
| #endif |
| #if CONFIG_IS_ENABLED(USB_HOST) |
| case USB_DR_MODE_HOST: |
| dev_dbg(dev, "Using host mode\n"); |
| driver = "dwc3-layerscape-host"; |
| break; |
| #endif |
| default: |
| dev_dbg(dev, "Unsupported dr_mode\n"); |
| return -ENODEV; |
| }; |
| |
| return device_bind_driver_to_node(dev, driver, name, node, NULL); |
| } |
| |
| static const struct udevice_id dwc3_layerscape_ids[] = { |
| { .compatible = "fsl,layerscape-dwc3" }, |
| { .compatible = "fsl,ls1028a-dwc3" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(dwc3_layerscape_wrapper) = { |
| .name = "dwc3-layerscape-wrapper", |
| .id = UCLASS_NOP, |
| .of_match = dwc3_layerscape_ids, |
| .bind = dwc3_layerscape_bind, |
| }; |