| // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) |
| /* |
| * Copyright (C) 2023 Marek Vasut <marex@denx.de> |
| */ |
| /dts-v1/; |
| /plugin/; |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| |
| #include "imx8mp-pinfunc.h" |
| |
| &brcmf { |
| reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; |
| }; |
| |
| &eeprom0 { /* EEPROM with EQoS MAC address */ |
| compatible = "atmel,24c02"; |
| pagesize = <16>; |
| }; |
| |
| &eeprom1 { /* EEPROM with FEC MAC address */ |
| compatible = "atmel,24c02"; |
| pagesize = <16>; |
| }; |
| |
| ðphy0f { /* SMSC LAN8740Ai */ |
| pinctrl-0 = <&pinctrl_ethphy0 &pinctrl_ioexp>; |
| reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; |
| }; |
| |
| ðphy0g { /* Micrel KSZ9131RNXI */ |
| pinctrl-0 = <&pinctrl_ethphy0 &pinctrl_ioexp>; |
| reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; |
| }; |
| |
| &i2c3 { |
| adc@48 { |
| compatible = "ti,tla2024"; |
| interrupts-extended; |
| }; |
| }; |
| |
| &ioexp { |
| status = "disabled"; |
| }; |
| |
| ®_eth_vio { |
| gpio = <&gpio2 10 GPIO_ACTIVE_LOW>; |
| pinctrl-0 = <&pinctrl_enet_vio>; |
| pinctrl-names = "default"; |
| }; |
| |
| &rv3032 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_rtc>; |
| interrupts-extended = <&gpio5 5 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| |
| &uart2 { |
| bluetooth { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart2_bt>; |
| shutdown-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| &usb_dwc3_0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usb0_vbus>; |
| }; |
| |
| &usdhc1 { |
| pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_usdhc1_wl_reg_en>; |
| pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_usdhc1_wl_reg_en>; |
| pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_usdhc1_wl_reg_en>; |
| }; |
| |
| &iomuxc { |
| pinctrl-0 = <&pinctrl_hog_base |
| &pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c |
| &pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f |
| &pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_i |
| &pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l |
| /* GPIO_M is connected to CLKOUT2 */ |
| &pinctrl_dhcom_int>; |
| |
| pinctrl_enet_vio: dhcom-enet-vio-grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x22 |
| >; |
| }; |
| |
| pinctrl_rtc: dhcom-rtc-grp { |
| fsl,pins = < |
| /* RTC_#INT Interrupt */ |
| MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x400001c6 |
| >; |
| }; |
| |
| pinctrl_uart2_bt: dhcom-uart2-bt-grp { |
| fsl,pins = < |
| /* BT_REG_EN */ |
| MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x144 |
| >; |
| }; |
| |
| pinctrl_usb0_vbus: dhcom-usb0-grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_GPIO1_IO10__USB1_OTG_ID 0x0 |
| >; |
| }; |
| |
| pinctrl_usdhc1_wl_reg_en: dhcom-usdhc1-wl-reg-en-grp { |
| fsl,pins = < |
| /* WL_REG_EN */ |
| MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x144 |
| >; |
| }; |
| }; |