| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2016 Freescale Semiconductor, Inc. |
| * Copyright 2019-2021 NXP |
| */ |
| |
| #include <config.h> |
| #include <clock_legacy.h> |
| #include <i2c.h> |
| #include <fdt_support.h> |
| #include <fsl_ddr_sdram.h> |
| #include <init.h> |
| #include <asm/global_data.h> |
| #include <asm/io.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/fsl_serdes.h> |
| #include <asm/arch/fdt.h> |
| #include <asm/arch/mmu.h> |
| #include <asm/arch/cpu.h> |
| #include <asm/arch/soc.h> |
| #include <asm/arch-fsl-layerscape/fsl_icid.h> |
| #include <ahci.h> |
| #include <hwconfig.h> |
| #include <mmc.h> |
| #include <scsi.h> |
| #include <fm_eth.h> |
| #include <fsl_csu.h> |
| #include <fsl_esdhc.h> |
| #include <fsl_ifc.h> |
| #include <spl.h> |
| #include "../common/i2c_mux.h" |
| |
| #include "../common/vid.h" |
| #include "../common/qixis.h" |
| #include "ls1046aqds_qixis.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #ifdef CONFIG_TFABOOT |
| struct ifc_regs ifc_cfg_nor_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = { |
| { |
| "nor0", |
| CFG_SYS_NOR0_CSPR, |
| CFG_SYS_NOR0_CSPR_EXT, |
| CFG_SYS_NOR_AMASK, |
| CFG_SYS_NOR_CSOR, |
| { |
| CFG_SYS_NOR_FTIM0, |
| CFG_SYS_NOR_FTIM1, |
| CFG_SYS_NOR_FTIM2, |
| CFG_SYS_NOR_FTIM3 |
| }, |
| |
| }, |
| { |
| "nor1", |
| CFG_SYS_NOR1_CSPR, |
| CFG_SYS_NOR1_CSPR_EXT, |
| CFG_SYS_NOR_AMASK, |
| CFG_SYS_NOR_CSOR, |
| { |
| CFG_SYS_NOR_FTIM0, |
| CFG_SYS_NOR_FTIM1, |
| CFG_SYS_NOR_FTIM2, |
| CFG_SYS_NOR_FTIM3 |
| }, |
| }, |
| { |
| "nand", |
| CFG_SYS_NAND_CSPR, |
| CFG_SYS_NAND_CSPR_EXT, |
| CFG_SYS_NAND_AMASK, |
| CFG_SYS_NAND_CSOR, |
| { |
| CFG_SYS_NAND_FTIM0, |
| CFG_SYS_NAND_FTIM1, |
| CFG_SYS_NAND_FTIM2, |
| CFG_SYS_NAND_FTIM3 |
| }, |
| }, |
| { |
| "fpga", |
| CFG_SYS_FPGA_CSPR, |
| CFG_SYS_FPGA_CSPR_EXT, |
| CFG_SYS_FPGA_AMASK, |
| CFG_SYS_FPGA_CSOR, |
| { |
| CFG_SYS_FPGA_FTIM0, |
| CFG_SYS_FPGA_FTIM1, |
| CFG_SYS_FPGA_FTIM2, |
| CFG_SYS_FPGA_FTIM3 |
| }, |
| } |
| }; |
| |
| struct ifc_regs ifc_cfg_nand_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = { |
| { |
| "nand", |
| CFG_SYS_NAND_CSPR, |
| CFG_SYS_NAND_CSPR_EXT, |
| CFG_SYS_NAND_AMASK, |
| CFG_SYS_NAND_CSOR, |
| { |
| CFG_SYS_NAND_FTIM0, |
| CFG_SYS_NAND_FTIM1, |
| CFG_SYS_NAND_FTIM2, |
| CFG_SYS_NAND_FTIM3 |
| }, |
| }, |
| { |
| "nor0", |
| CFG_SYS_NOR0_CSPR, |
| CFG_SYS_NOR0_CSPR_EXT, |
| CFG_SYS_NOR_AMASK, |
| CFG_SYS_NOR_CSOR, |
| { |
| CFG_SYS_NOR_FTIM0, |
| CFG_SYS_NOR_FTIM1, |
| CFG_SYS_NOR_FTIM2, |
| CFG_SYS_NOR_FTIM3 |
| }, |
| }, |
| { |
| "nor1", |
| CFG_SYS_NOR1_CSPR, |
| CFG_SYS_NOR1_CSPR_EXT, |
| CFG_SYS_NOR_AMASK, |
| CFG_SYS_NOR_CSOR, |
| { |
| CFG_SYS_NOR_FTIM0, |
| CFG_SYS_NOR_FTIM1, |
| CFG_SYS_NOR_FTIM2, |
| CFG_SYS_NOR_FTIM3 |
| }, |
| }, |
| { |
| "fpga", |
| CFG_SYS_FPGA_CSPR, |
| CFG_SYS_FPGA_CSPR_EXT, |
| CFG_SYS_FPGA_AMASK, |
| CFG_SYS_FPGA_CSOR, |
| { |
| CFG_SYS_FPGA_FTIM0, |
| CFG_SYS_FPGA_FTIM1, |
| CFG_SYS_FPGA_FTIM2, |
| CFG_SYS_FPGA_FTIM3 |
| }, |
| } |
| }; |
| |
| void ifc_cfg_boot_info(struct ifc_regs_info *regs_info) |
| { |
| enum boot_src src = get_boot_src(); |
| |
| if (src == BOOT_SOURCE_IFC_NAND) |
| regs_info->regs = ifc_cfg_nand_boot; |
| else |
| regs_info->regs = ifc_cfg_nor_boot; |
| regs_info->cs_size = CONFIG_SYS_FSL_IFC_BANK_COUNT; |
| } |
| |
| #endif |
| |
| enum { |
| MUX_TYPE_GPIO, |
| }; |
| |
| int checkboard(void) |
| { |
| #ifdef CONFIG_TFABOOT |
| enum boot_src src = get_boot_src(); |
| #endif |
| char buf[64]; |
| #ifndef CONFIG_SD_BOOT |
| u8 sw; |
| #endif |
| |
| puts("Board: LS1046AQDS, boot from "); |
| |
| #ifdef CONFIG_TFABOOT |
| if (src == BOOT_SOURCE_SD_MMC) |
| puts("SD\n"); |
| else { |
| #endif |
| |
| #ifdef CONFIG_SD_BOOT |
| puts("SD\n"); |
| #else |
| sw = QIXIS_READ(brdcfg[0]); |
| sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT; |
| |
| if (sw < 0x8) |
| printf("vBank: %d\n", sw); |
| else if (sw == 0x8) |
| puts("PromJet\n"); |
| else if (sw == 0x9) |
| puts("NAND\n"); |
| else if (sw == 0xF) |
| printf("QSPI\n"); |
| else |
| printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH); |
| #endif |
| |
| #ifdef CONFIG_TFABOOT |
| } |
| #endif |
| printf("Sys ID: 0x%02x, Sys Ver: 0x%02x\n", |
| QIXIS_READ(id), QIXIS_READ(arch)); |
| |
| printf("FPGA: v%d (%s), build %d\n", |
| (int)QIXIS_READ(scver), qixis_read_tag(buf), |
| (int)qixis_read_minor()); |
| |
| return 0; |
| } |
| |
| bool if_board_diff_clk(void) |
| { |
| u8 diff_conf = QIXIS_READ(brdcfg[11]); |
| |
| return diff_conf & 0x40; |
| } |
| |
| unsigned long get_board_sys_clk(void) |
| { |
| u8 sysclk_conf = QIXIS_READ(brdcfg[1]); |
| |
| switch (sysclk_conf & 0x0f) { |
| case QIXIS_SYSCLK_64: |
| return 64000000; |
| case QIXIS_SYSCLK_83: |
| return 83333333; |
| case QIXIS_SYSCLK_100: |
| return 100000000; |
| case QIXIS_SYSCLK_125: |
| return 125000000; |
| case QIXIS_SYSCLK_133: |
| return 133333333; |
| case QIXIS_SYSCLK_150: |
| return 150000000; |
| case QIXIS_SYSCLK_160: |
| return 160000000; |
| case QIXIS_SYSCLK_166: |
| return 166666666; |
| } |
| |
| return 66666666; |
| } |
| |
| unsigned long get_board_ddr_clk(void) |
| { |
| u8 ddrclk_conf = QIXIS_READ(brdcfg[1]); |
| |
| if (if_board_diff_clk()) |
| return get_board_sys_clk(); |
| switch ((ddrclk_conf & 0x30) >> 4) { |
| case QIXIS_DDRCLK_100: |
| return 100000000; |
| case QIXIS_DDRCLK_125: |
| return 125000000; |
| case QIXIS_DDRCLK_133: |
| return 133333333; |
| } |
| |
| return 66666666; |
| } |
| |
| #ifdef CONFIG_LPUART |
| u32 get_lpuart_clk(void) |
| { |
| return gd->bus_clk; |
| } |
| #endif |
| |
| int dram_init(void) |
| { |
| /* |
| * When resuming from deep sleep, the I2C channel may not be |
| * in the default channel. So, switch to the default channel |
| * before accessing DDR SPD. |
| * |
| * PCA9547 mount on I2C1 bus |
| */ |
| select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0); |
| fsl_initdram(); |
| #if (!defined(CONFIG_SPL) && !defined(CONFIG_TFABOOT)) || \ |
| defined(CONFIG_XPL_BUILD) |
| /* This will break-before-make MMU for DDR */ |
| update_early_mmu_table(); |
| #endif |
| |
| return 0; |
| } |
| |
| int i2c_multiplexer_select_vid_channel(u8 channel) |
| { |
| return select_i2c_ch_pca9547(channel, 0); |
| } |
| |
| int board_early_init_f(void) |
| { |
| u32 __iomem *cntcr = (u32 *)CFG_SYS_FSL_TIMER_ADDR; |
| #ifdef CONFIG_HAS_FSL_XHCI_USB |
| struct ccsr_scfg *scfg = (struct ccsr_scfg *)CFG_SYS_FSL_SCFG_ADDR; |
| u32 usb_pwrfault; |
| #endif |
| #ifdef CONFIG_LPUART |
| u8 uart; |
| #endif |
| |
| /* |
| * Enable secure system counter for timer |
| */ |
| out_le32(cntcr, 0x1); |
| |
| #if defined(CONFIG_SYS_I2C_EARLY_INIT) |
| i2c_early_init_f(); |
| #endif |
| fsl_lsch2_early_init_f(); |
| |
| #ifdef CONFIG_HAS_FSL_XHCI_USB |
| out_be32(&scfg->rcwpmuxcr0, 0x3333); |
| out_be32(&scfg->usbdrvvbus_selcr, SCFG_USBDRVVBUS_SELCR_USB1); |
| usb_pwrfault = (SCFG_USBPWRFAULT_DEDICATED << |
| SCFG_USBPWRFAULT_USB3_SHIFT) | |
| (SCFG_USBPWRFAULT_DEDICATED << |
| SCFG_USBPWRFAULT_USB2_SHIFT) | |
| (SCFG_USBPWRFAULT_SHARED << |
| SCFG_USBPWRFAULT_USB1_SHIFT); |
| out_be32(&scfg->usbpwrfault_selcr, usb_pwrfault); |
| #endif |
| |
| #ifdef CONFIG_LPUART |
| /* We use lpuart0 as system console */ |
| uart = QIXIS_READ(brdcfg[14]); |
| uart &= ~CFG_UART_MUX_MASK; |
| uart |= CFG_LPUART_EN << CFG_UART_MUX_SHIFT; |
| QIXIS_WRITE(brdcfg[14], uart); |
| #endif |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_FSL_DEEP_SLEEP |
| /* determine if it is a warm boot */ |
| bool is_warm_boot(void) |
| { |
| #define DCFG_CCSR_CRSTSR_WDRFR (1 << 3) |
| struct ccsr_gur __iomem *gur = (void *)CFG_SYS_FSL_GUTS_ADDR; |
| |
| if (in_be32(&gur->crstsr) & DCFG_CCSR_CRSTSR_WDRFR) |
| return 1; |
| |
| return 0; |
| } |
| #endif |
| |
| int config_board_mux(int ctrl_type) |
| { |
| u8 reg14; |
| |
| reg14 = QIXIS_READ(brdcfg[14]); |
| |
| switch (ctrl_type) { |
| case MUX_TYPE_GPIO: |
| reg14 = (reg14 & (~0x6)) | 0x2; |
| break; |
| default: |
| puts("Unsupported mux interface type\n"); |
| return -1; |
| } |
| |
| QIXIS_WRITE(brdcfg[14], reg14); |
| |
| return 0; |
| } |
| |
| int config_serdes_mux(void) |
| { |
| return 0; |
| } |
| |
| #ifdef CONFIG_MISC_INIT_R |
| int misc_init_r(void) |
| { |
| if (hwconfig("gpio")) |
| config_board_mux(MUX_TYPE_GPIO); |
| |
| return 0; |
| } |
| #endif |
| |
| int board_init(void) |
| { |
| select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0); |
| |
| #ifdef CFG_SYS_FSL_SERDES |
| config_serdes_mux(); |
| #endif |
| |
| if (adjust_vdd(0)) |
| printf("Warning: Adjusting core voltage failed.\n"); |
| |
| #ifdef CONFIG_NXP_ESBC |
| /* |
| * In case of Secure Boot, the IBR configures the SMMU |
| * to allow only Secure transactions. |
| * SMMU must be reset in bypass mode. |
| * Set the ClientPD bit and Clear the USFCFG Bit |
| */ |
| u32 val; |
| val = (in_le32(SMMU_SCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK); |
| out_le32(SMMU_SCR0, val); |
| val = (in_le32(SMMU_NSCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK); |
| out_le32(SMMU_NSCR0, val); |
| #endif |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_OF_BOARD_SETUP |
| int ft_board_setup(void *blob, struct bd_info *bd) |
| { |
| u64 base[CONFIG_NR_DRAM_BANKS]; |
| u64 size[CONFIG_NR_DRAM_BANKS]; |
| u8 reg; |
| |
| /* fixup DT for the two DDR banks */ |
| base[0] = gd->bd->bi_dram[0].start; |
| size[0] = gd->bd->bi_dram[0].size; |
| base[1] = gd->bd->bi_dram[1].start; |
| size[1] = gd->bd->bi_dram[1].size; |
| |
| fdt_fixup_memory_banks(blob, base, size, 2); |
| ft_cpu_setup(blob, bd); |
| |
| #ifdef CONFIG_FMAN_ENET |
| fdt_fixup_board_enet(blob); |
| #endif |
| |
| fdt_fixup_icid(blob); |
| |
| reg = QIXIS_READ(brdcfg[0]); |
| reg = (reg & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT; |
| |
| /* Disable IFC if QSPI is enabled */ |
| if (reg == 0xF) |
| do_fixup_by_compat(blob, "fsl,ifc", |
| "status", "disabled", 8 + 1, 1); |
| |
| return 0; |
| } |
| #endif |
| |
| u8 flash_read8(void *addr) |
| { |
| return __raw_readb(addr + 1); |
| } |
| |
| void flash_write16(u16 val, void *addr) |
| { |
| u16 shftval = (((val >> 8) & 0xff) | ((val << 8) & 0xff00)); |
| |
| __raw_writew(shftval, addr); |
| } |
| |
| u16 flash_read16(void *addr) |
| { |
| u16 val = __raw_readw(addr); |
| |
| return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00); |
| } |
| |
| #if defined(CONFIG_TFABOOT) && defined(CONFIG_ENV_IS_IN_SPI_FLASH) |
| void *env_sf_get_env_addr(void) |
| { |
| return (void *)(CFG_SYS_FSL_QSPI_BASE + CONFIG_ENV_OFFSET); |
| } |
| #endif |