| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2020 - Cortina Access Inc. |
| * |
| */ |
| #include <config.h> |
| #include <event.h> |
| #include <init.h> |
| #include <malloc.h> |
| #include <errno.h> |
| #include <netdev.h> |
| #include <asm/global_data.h> |
| #include <asm/io.h> |
| #include <linux/bitops.h> |
| #include <linux/compiler.h> |
| #include <configs/presidio_asic.h> |
| #include <linux/psci.h> |
| #include <asm/psci.h> |
| #include <cpu_func.h> |
| #include <asm/armv8/mmu.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define CA_PERIPH_BASE 0xE0000000UL |
| #define CA_PERIPH_SIZE 0x20000000UL |
| #define CA_GLOBAL_BASE 0xf4320000 |
| #define CA_GLOBAL_JTAG_ID 0xf4320000 |
| #define CA_GLOBAL_BLOCK_RESET 0xf4320004 |
| #define CA_GLOBAL_BLOCK_RESET_RESET_DMA BIT(16) |
| #define CA_DMA_SEC_SSP_BAUDRATE_CTRL 0xf7001b94 |
| #define CA_DMA_SEC_SSP_ID 0xf7001b80 |
| |
| int print_cpuinfo(void) |
| { |
| printf("CPU: Cortina Presidio G3\n"); |
| return 0; |
| } |
| |
| static struct mm_region presidio_mem_map[] = { |
| { |
| .virt = DDR_BASE, |
| .phys = DDR_BASE, |
| .size = PHYS_SDRAM_1_SIZE, |
| .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | |
| PTE_BLOCK_OUTER_SHARE |
| }, |
| { |
| .virt = CA_PERIPH_BASE, |
| .phys = CA_PERIPH_BASE, |
| .size = CA_PERIPH_SIZE, |
| .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | |
| PTE_BLOCK_NON_SHARE |
| }, |
| { |
| /* List terminator */ |
| 0, |
| } |
| }; |
| |
| struct mm_region *mem_map = presidio_mem_map; |
| |
| static noinline int invoke_psci_fn_smc(u64 function_id, u64 arg0, u64 arg1, |
| u64 arg2) |
| { |
| asm volatile("mov x0, %0\n" |
| "mov x1, %1\n" |
| "mov x2, %2\n" |
| "mov x3, %3\n" |
| "smc #0\n" |
| : "+r" (function_id) |
| : "r" (arg0), "r" (arg1), "r" (arg2) |
| ); |
| |
| return function_id; |
| } |
| |
| int board_early_init_r(void) |
| { |
| dcache_disable(); |
| return 0; |
| } |
| |
| int board_init(void) |
| { |
| unsigned int reg_data, jtag_id; |
| |
| /* Enable timer */ |
| writel(1, CFG_SYS_TIMER_BASE); |
| |
| /* Enable snoop in CCI400 slave port#4 */ |
| writel(3, 0xF5595000); |
| |
| jtag_id = readl(CA_GLOBAL_JTAG_ID); |
| |
| /* If this is HGU variant then do not use |
| * the Saturn daughter card ref. clk |
| */ |
| if (jtag_id == 0x1010D8F3) { |
| reg_data = readl(0xF3100064); |
| /* change multifunc. REF CLK pin to |
| * a simple GPIO pin |
| */ |
| reg_data |= (1 << 1); |
| writel(reg_data, 0xf3100064); |
| } |
| |
| return 0; |
| } |
| |
| int dram_init(void) |
| { |
| unsigned int ddr_size; |
| |
| ddr_size = readl(0x111100c); |
| gd->ram_size = ddr_size * 0x100000; |
| return 0; |
| } |
| |
| void reset_cpu(void) |
| { |
| invoke_psci_fn_smc(PSCI_0_2_FN_SYSTEM_RESET, 0, 0, 0); |
| } |
| |
| #ifdef CONFIG_LAST_STAGE_INIT |
| static int last_stage_init(void) |
| { |
| u32 val; |
| |
| val = readl(CA_GLOBAL_BLOCK_RESET); |
| val &= ~CA_GLOBAL_BLOCK_RESET_RESET_DMA; |
| writel(val, CA_GLOBAL_BLOCK_RESET); |
| |
| /* reduce output pclk ~3.7Hz to save power consumption */ |
| writel(0x000000FF, CA_DMA_SEC_SSP_BAUDRATE_CTRL); |
| |
| return 0; |
| } |
| EVENT_SPY_SIMPLE(EVT_LAST_STAGE_INIT, last_stage_init); |
| #endif |