include/configs/MPC8260ADS.h - filogic/uboot - Gitiles

 /*
  * (C) Copyright 2001
  * Stuart Hughes <stuarth@lineo.com>
  * This file is based on similar values for other boards found in other
  * U-Boot config files, and some that I found in the mpc8260ads manual.
  *
  * Note: my board is a PILOT rev.
  * Note: the mpc8260ads doesn't come with a proper Ethernet MAC address.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 /*
  * Config header file for a MPC8260ADS Pilot 16M Ram Simm, 8Mbytes Flash Simm
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 /*
  * High Level Configuration Options
  * (easy to change)
  */

 #define CONFIG_MPC8260		1	/* This is an MPC8260 CPU   */
 #define CONFIG_MPC8260ADS	1	/* ...on motorola ads board */

 #define CONFIG_BOARD_PRE_INIT	1	/* Call board_pre_init	*/

 /* allow serial and ethaddr to be overwritten */
 #define CONFIG_ENV_OVERWRITE

 /*
  * select serial console configuration
  *
  * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
  * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
  * for SCC).
  *
  * if CONFIG_CONS_NONE is defined, then the serial console routines must
  * defined elsewhere (for example, on the cogent platform, there are serial
  * ports on the motherboard which are used for the serial console - see
  * cogent/cma101/serial.[ch]).
  */
 #undef	CONFIG_CONS_ON_SMC		/* define if console on SMC */
 #define CONFIG_CONS_ON_SCC		/* define if console on SCC */
 #undef	CONFIG_CONS_NONE		/* define if console on something else */
 #define CONFIG_CONS_INDEX	1	/* which serial channel for console */

 /*
  * select ethernet configuration
  *
  * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
  * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
  * for FCC)
  *
  * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
  * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
  * from CONFIG_COMMANDS to remove support for networking.
  */
 #undef	CONFIG_ETHER_ON_SCC		/* define if ether on SCC   */
 #define CONFIG_ETHER_ON_FCC		/* define if ether on FCC   */
 #undef	CONFIG_ETHER_NONE		/* define if ether on something else */
 #define CONFIG_ETHER_INDEX	2	/* which channel for ether  */

 #if (CONFIG_ETHER_INDEX == 2)

 /*
  * - Rx-CLK is CLK13
  * - Tx-CLK is CLK14
  * - Select bus for bd/buffers (see 28-13)
  * - Half duplex
  */
 # define CFG_CMXFCR_MASK	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
 # define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
 # define CFG_CPMFCR_RAMTYPE	0
 # define CFG_FCC_PSMR		0

 #endif	/* CONFIG_ETHER_INDEX */

 /* other options */
 #define CONFIG_HARD_I2C		1	/* To enable I2C support	*/
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
 #define CFG_I2C_SLAVE		0x7F


 #define CONFIG_8260_CLKIN	66666666	/* in Hz */
 #define CONFIG_BAUDRATE		115200

 #define CONFIG_COMMANDS		(CFG_CMD_ALL & ~( \
 				 CFG_CMD_BEDBUG | \
 				 CFG_CMD_BSP	| \
 				 CFG_CMD_DATE	| \
 				 CFG_CMD_DOC	| \
 				 CFG_CMD_DTT	| \
 				 CFG_CMD_EEPROM | \
 				 CFG_CMD_ELF    | \
 				 CFG_CMD_FDC	| \
 				 CFG_CMD_HWFLOW	| \
 				 CFG_CMD_IDE	| \
 				 CFG_CMD_JFFS2	| \
 				 CFG_CMD_KGDB	| \
 				 CFG_CMD_MII	| \
 				 CFG_CMD_PCI	| \
 				 CFG_CMD_PCMCIA | \
 				 CFG_CMD_SCSI	| \
 				 CFG_CMD_VFD	| \
 				 CFG_CMD_USB	) )

 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>


 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
 #define CONFIG_BOOTCOMMAND	"bootm 100000"	/* autoboot command */
 #define CONFIG_BOOTARGS		"root=/dev/ram rw"

 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #undef	CONFIG_KGDB_ON_SMC		/* define if kgdb on SMC */
 #define CONFIG_KGDB_ON_SCC		/* define if kgdb on SCC */
 #undef	CONFIG_KGDB_NONE		/* define if kgdb on something else */
 #define CONFIG_KGDB_INDEX	2	/* which serial channel for kgdb */
 #define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port at */
 #endif

 #undef	CONFIG_WATCHDOG			/* disable platform specific watchdog */

 /*
  * Miscellaneous configurable options
  */
 #define CFG_LONGHELP			/* undef to save memory	    */
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt   */
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #define CFG_CBSIZE	1024		/* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE	256			/* Console I/O Buffer Size  */
 #endif
 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
 #define CFG_MAXARGS	16			/* max number of command args	*/
 #define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/

 #define CFG_MEMTEST_START	0x00100000	/* memtest works on */
 #define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/

 #define CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
 					/* for versions < 2.4.5-pre5	*/

 #define CFG_LOAD_ADDR		0x100000	/* default load address */

 #define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */

 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }

 #define CFG_FLASH_BASE		0xff800000
 #define FLASH_BASE		0xff800000
 #define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks	*/
 #define CFG_MAX_FLASH_SECT	32	/* max num of sects on one chip */
 #define CFG_FLASH_SIZE		8
 #define CFG_FLASH_ERASE_TOUT	8000	/* Timeout for Flash Erase (in ms)    */
 #define CFG_FLASH_WRITE_TOUT	5	/* Timeout for Flash Write (in ms)    */

 /* this is stuff came out of the Motorola docs */
 #define CFG_DEFAULT_IMMR	0x0F010000

 #define CFG_IMMR		0x04700000
 #define CFG_BCSR		0x04500000
 #define CFG_SDRAM_BASE		0x00000000
 #define CFG_LSDRAM_BASE		0x04000000

 #define RS232EN_1		0x02000002
 #define RS232EN_2		0x01000001
 #define FETHIEN			0x08000008
 #define FETH_RST		0x04000004

 #define CFG_INIT_RAM_ADDR	CFG_IMMR
 #define CFG_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
 #define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET


 /* 0x0EA28205 */
 #define CFG_HRCW_MASTER (   ( HRCW_BPS11 | HRCW_CIP )			    |\
 			    ( HRCW_L2CPC10 | HRCW_DPPC10 | HRCW_ISB010 )    |\
 			    ( HRCW_BMS | HRCW_APPC10 )			    |\
 			    ( HRCW_MODCK_H0101 )			     \
 			)

 /* no slaves */
 #define CFG_HRCW_SLAVE1 0
 #define CFG_HRCW_SLAVE2 0
 #define CFG_HRCW_SLAVE3 0
 #define CFG_HRCW_SLAVE4 0
 #define CFG_HRCW_SLAVE5 0
 #define CFG_HRCW_SLAVE6 0
 #define CFG_HRCW_SLAVE7 0

 #define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM	0x02	/* Software reboot	     */

 #define CFG_MONITOR_BASE    TEXT_BASE
 #if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
 #   define CFG_RAMBOOT
 #endif

 #define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */

 #ifndef CFG_RAMBOOT
 #  define CFG_ENV_IS_IN_FLASH	1
 #    define CFG_ENV_ADDR	(CFG_MONITOR_BASE + 0x40000)
 #    define CFG_ENV_SECT_SIZE	0x40000
 #else
 #  define CFG_ENV_IS_IN_NVRAM	1
 #  define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
 #  define CFG_ENV_SIZE		0x200
 #endif /* CFG_RAMBOOT */


 #define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU */
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif


 #define CFG_HID0_INIT		0
 #define CFG_HID0_FINAL		(HID0_ICE | HID0_IFEM | HID0_ABE )

 #define CFG_HID2		0

 #define CFG_SYPCR		0xFFFFFFC3
 #define CFG_BCR			0x100C0000
 #define CFG_SIUMCR		0x0A200000
 #define CFG_SCCR		0x00000000
 #define CFG_BR0_PRELIM		0xFF801801
 #define CFG_OR0_PRELIM		0xFF800836
 #define CFG_BR1_PRELIM		0x04501801
 #define CFG_OR1_PRELIM		0xFFFF8010

 #define CFG_RMR			0
 #define CFG_TMCNTSC		(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
 #define CFG_PISCR		(PISCR_PS|PISCR_PTF|PISCR_PTE)
 #define CFG_RCCR		0
 #define CFG_PSDMR		0x016EB452
 #define CFG_MPTPR		0x00001900
 #define CFG_PSRT		0x00000021

 #define CFG_RESET_ADDRESS	0x04400000

 #endif /* __CONFIG_H */
	/*
	* (C) Copyright 2001
	* Stuart Hughes <stuarth@lineo.com>
	* This file is based on similar values for other boards found in other
	* U-Boot config files, and some that I found in the mpc8260ads manual.
	*
	* Note: my board is a PILOT rev.
	* Note: the mpc8260ads doesn't come with a proper Ethernet MAC address.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	/*
	* Config header file for a MPC8260ADS Pilot 16M Ram Simm, 8Mbytes Flash Simm
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	/*
	* High Level Configuration Options
	* (easy to change)
	*/

	#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */
	#define CONFIG_MPC8260ADS 1 /* ...on motorola ads board */

	#define CONFIG_BOARD_PRE_INIT 1 /* Call board_pre_init */

	/* allow serial and ethaddr to be overwritten */
	#define CONFIG_ENV_OVERWRITE

	/*
	* select serial console configuration
	*
	* if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
	* CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
	* for SCC).
	*
	* if CONFIG_CONS_NONE is defined, then the serial console routines must
	* defined elsewhere (for example, on the cogent platform, there are serial
	* ports on the motherboard which are used for the serial console - see
	* cogent/cma101/serial.[ch]).
	*/
	#undef CONFIG_CONS_ON_SMC /* define if console on SMC */
	#define CONFIG_CONS_ON_SCC /* define if console on SCC */
	#undef CONFIG_CONS_NONE /* define if console on something else */
	#define CONFIG_CONS_INDEX 1 /* which serial channel for console */

	/*
	* select ethernet configuration
	*
	* if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
	* CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
	* for FCC)
	*
	* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
	* defined elsewhere (as for the console), or CFG_CMD_NET must be removed
	* from CONFIG_COMMANDS to remove support for networking.
	*/
	#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
	#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
	#undef CONFIG_ETHER_NONE /* define if ether on something else */
	#define CONFIG_ETHER_INDEX 2 /* which channel for ether */

	#if (CONFIG_ETHER_INDEX == 2)

	/*
	* - Rx-CLK is CLK13
	* - Tx-CLK is CLK14
	* - Select bus for bd/buffers (see 28-13)
	* - Half duplex
	*/
	# define CFG_CMXFCR_MASK (CMXFCR_FC2 \| CMXFCR_RF2CS_MSK \| CMXFCR_TF2CS_MSK)
	# define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 \| CMXFCR_TF2CS_CLK14)
	# define CFG_CPMFCR_RAMTYPE 0
	# define CFG_FCC_PSMR 0

	#endif /* CONFIG_ETHER_INDEX */

	/* other options */
	#define CONFIG_HARD_I2C 1 /* To enable I2C support */
	#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
	#define CFG_I2C_SLAVE 0x7F


	#define CONFIG_8260_CLKIN 66666666 /* in Hz */
	#define CONFIG_BAUDRATE 115200

	#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
	CFG_CMD_BEDBUG \| \
	CFG_CMD_BSP \| \
	CFG_CMD_DATE \| \
	CFG_CMD_DOC \| \
	CFG_CMD_DTT \| \
	CFG_CMD_EEPROM \| \
	CFG_CMD_ELF \| \
	CFG_CMD_FDC \| \
	CFG_CMD_HWFLOW \| \
	CFG_CMD_IDE \| \
	CFG_CMD_JFFS2 \| \
	CFG_CMD_KGDB \| \
	CFG_CMD_MII \| \
	CFG_CMD_PCI \| \
	CFG_CMD_PCMCIA \| \
	CFG_CMD_SCSI \| \
	CFG_CMD_VFD \| \
	CFG_CMD_USB ) )

	/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
	#include <cmd_confdefs.h>


	#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
	#define CONFIG_BOOTCOMMAND "bootm 100000" /* autoboot command */
	#define CONFIG_BOOTARGS "root=/dev/ram rw"

	#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
	#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
	#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
	#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
	#define CONFIG_KGDB_INDEX 2 /* which serial channel for kgdb */
	#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */
	#endif

	#undef CONFIG_WATCHDOG /* disable platform specific watchdog */

	/*
	* Miscellaneous configurable options
	*/
	#define CFG_LONGHELP /* undef to save memory */
	#define CFG_PROMPT "=> " /* Monitor Command Prompt */
	#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
	#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
	#else
	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
	#endif
	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
	#define CFG_MAXARGS 16 /* max number of command args */
	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */

	#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
	#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */

	#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
	/* for versions < 2.4.5-pre5 */

	#define CFG_LOAD_ADDR 0x100000 /* default load address */

	#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */

	#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }

	#define CFG_FLASH_BASE 0xff800000
	#define FLASH_BASE 0xff800000
	#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */
	#define CFG_MAX_FLASH_SECT 32 /* max num of sects on one chip */
	#define CFG_FLASH_SIZE 8
	#define CFG_FLASH_ERASE_TOUT 8000 /* Timeout for Flash Erase (in ms) */
	#define CFG_FLASH_WRITE_TOUT 5 /* Timeout for Flash Write (in ms) */

	/* this is stuff came out of the Motorola docs */
	#define CFG_DEFAULT_IMMR 0x0F010000

	#define CFG_IMMR 0x04700000
	#define CFG_BCSR 0x04500000
	#define CFG_SDRAM_BASE 0x00000000
	#define CFG_LSDRAM_BASE 0x04000000

	#define RS232EN_1 0x02000002
	#define RS232EN_2 0x01000001
	#define FETHIEN 0x08000008
	#define FETH_RST 0x04000004

	#define CFG_INIT_RAM_ADDR CFG_IMMR
	#define CFG_INIT_RAM_END 0x4000 /* End of used area in DPRAM */
	#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
	#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
	#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET


	/* 0x0EA28205 */
	#define CFG_HRCW_MASTER ( ( HRCW_BPS11 \| HRCW_CIP ) \|\
	( HRCW_L2CPC10 \| HRCW_DPPC10 \| HRCW_ISB010 ) \|\
	( HRCW_BMS \| HRCW_APPC10 ) \|\
	( HRCW_MODCK_H0101 ) \
	)

	/* no slaves */
	#define CFG_HRCW_SLAVE1 0
	#define CFG_HRCW_SLAVE2 0
	#define CFG_HRCW_SLAVE3 0
	#define CFG_HRCW_SLAVE4 0
	#define CFG_HRCW_SLAVE5 0
	#define CFG_HRCW_SLAVE6 0
	#define CFG_HRCW_SLAVE7 0

	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	#define BOOTFLAG_WARM 0x02 /* Software reboot */

	#define CFG_MONITOR_BASE TEXT_BASE
	#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
	# define CFG_RAMBOOT
	#endif

	#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
	#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
	#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */

	#ifndef CFG_RAMBOOT
	# define CFG_ENV_IS_IN_FLASH 1
	# define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
	# define CFG_ENV_SECT_SIZE 0x40000
	#else
	# define CFG_ENV_IS_IN_NVRAM 1
	# define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
	# define CFG_ENV_SIZE 0x200
	#endif /* CFG_RAMBOOT */


	#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
	#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
	# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
	#endif


	#define CFG_HID0_INIT 0
	#define CFG_HID0_FINAL (HID0_ICE \| HID0_IFEM \| HID0_ABE )

	#define CFG_HID2 0

	#define CFG_SYPCR 0xFFFFFFC3
	#define CFG_BCR 0x100C0000
	#define CFG_SIUMCR 0x0A200000
	#define CFG_SCCR 0x00000000
	#define CFG_BR0_PRELIM 0xFF801801
	#define CFG_OR0_PRELIM 0xFF800836
	#define CFG_BR1_PRELIM 0x04501801
	#define CFG_OR1_PRELIM 0xFFFF8010

	#define CFG_RMR 0
	#define CFG_TMCNTSC (TMCNTSC_SEC\|TMCNTSC_ALR\|TMCNTSC_TCF\|TMCNTSC_TCE)
	#define CFG_PISCR (PISCR_PS\|PISCR_PTF\|PISCR_PTE)
	#define CFG_RCCR 0
	#define CFG_PSDMR 0x016EB452
	#define CFG_MPTPR 0x00001900
	#define CFG_PSRT 0x00000021

	#define CFG_RESET_ADDRESS 0x04400000

	#endif /* __CONFIG_H */