drivers/mtd/nand/raw/atmel_nand.c

// SPDX-License-Identifier: GPL-2.0+
/*
 * (C) Copyright 2007-2008
 * Stelian Pop <stelian@popies.net>
 * Lead Tech Design <www.leadtechdesign.com>
 *
 * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
 *
 * Add Programmable Multibit ECC support for various AT91 SoC
 *     (C) Copyright 2012 ATMEL, Hong Xu
 */

#include <common.h>
#include <log.h>
#include <asm/gpio.h>
#include <asm/arch/gpio.h>
#include <dm/device_compat.h>
#include <dm/devres.h>
#include <linux/bitops.h>
#include <linux/bug.h>
#include <linux/delay.h>

#include <malloc.h>
#include <nand.h>
#include <watchdog.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/rawnand.h>

#ifdef CONFIG_ATMEL_NAND_HWECC

/* Register access macros */
#define ecc_readl(add, reg)				\
	readl(add + ATMEL_ECC_##reg)
#define ecc_writel(add, reg, value)			\
	writel((value), add + ATMEL_ECC_##reg)

#include "atmel_nand_ecc.h"	/* Hardware ECC registers */

#ifdef CONFIG_ATMEL_NAND_HW_PMECC

#ifdef CONFIG_SPL_BUILD
#undef CONFIG_SYS_NAND_ONFI_DETECTION
#endif

struct atmel_nand_host {
	struct pmecc_regs __iomem *pmecc;
	struct pmecc_errloc_regs __iomem *pmerrloc;
	void __iomem		*pmecc_rom_base;

	u8		pmecc_corr_cap;
	u16		pmecc_sector_size;
	u32		pmecc_index_table_offset;
	u32		pmecc_version;

	int		pmecc_bytes_per_sector;
	int		pmecc_sector_number;
	int		pmecc_degree;	/* Degree of remainders */
	int		pmecc_cw_len;	/* Length of codeword */

	/* lookup table for alpha_to and index_of */
	void __iomem	*pmecc_alpha_to;
	void __iomem	*pmecc_index_of;

	/* data for pmecc computation */
	int16_t	*pmecc_smu;
	int16_t	*pmecc_partial_syn;
	int16_t	*pmecc_si;
	int16_t	*pmecc_lmu; /* polynomal order */
	int	*pmecc_mu;
	int	*pmecc_dmu;
	int	*pmecc_delta;
};

static struct atmel_nand_host pmecc_host;
static struct nand_ecclayout atmel_pmecc_oobinfo;

/*
 * Return number of ecc bytes per sector according to sector size and
 * correction capability
 *
 * Following table shows what at91 PMECC supported:
 * Correction Capability	Sector_512_bytes	Sector_1024_bytes
 * =====================	================	=================
 *                2-bits                 4-bytes                  4-bytes
 *                4-bits                 7-bytes                  7-bytes
 *                8-bits                13-bytes                 14-bytes
 *               12-bits                20-bytes                 21-bytes
 *               24-bits                39-bytes                 42-bytes
 *               32-bits                52-bytes                 56-bytes
 */
static int pmecc_get_ecc_bytes(int cap, int sector_size)
{
	int m = 12 + sector_size / 512;
	return (m * cap + 7) / 8;
}

static void pmecc_config_ecc_layout(struct nand_ecclayout *layout,
	int oobsize, int ecc_len)
{
	int i;

	layout->eccbytes = ecc_len;

	/* ECC will occupy the last ecc_len bytes continuously */
	for (i = 0; i < ecc_len; i++)
		layout->eccpos[i] = oobsize - ecc_len + i;

	layout->oobfree[0].offset = 2;
	layout->oobfree[0].length =
		oobsize - ecc_len - layout->oobfree[0].offset;
}

static void __iomem *pmecc_get_alpha_to(struct atmel_nand_host *host)
{
	int table_size;

	table_size = host->pmecc_sector_size == 512 ?
		PMECC_INDEX_TABLE_SIZE_512 : PMECC_INDEX_TABLE_SIZE_1024;

	/* the ALPHA lookup table is right behind the INDEX lookup table. */
	return host->pmecc_rom_base + host->pmecc_index_table_offset +
			table_size * sizeof(int16_t);
}

static void pmecc_data_free(struct atmel_nand_host *host)
{
	free(host->pmecc_partial_syn);
	free(host->pmecc_si);
	free(host->pmecc_lmu);
	free(host->pmecc_smu);
	free(host->pmecc_mu);
	free(host->pmecc_dmu);
	free(host->pmecc_delta);
}

static int pmecc_data_alloc(struct atmel_nand_host *host)
{
	const int cap = host->pmecc_corr_cap;
	int size;

	size = (2 * cap + 1) * sizeof(int16_t);
	host->pmecc_partial_syn = malloc(size);
	host->pmecc_si = malloc(size);
	host->pmecc_lmu = malloc((cap + 1) * sizeof(int16_t));
	host->pmecc_smu = malloc((cap + 2) * size);

	size = (cap + 1) * sizeof(int);
	host->pmecc_mu = malloc(size);
	host->pmecc_dmu = malloc(size);
	host->pmecc_delta = malloc(size);

	if (host->pmecc_partial_syn &&
			host->pmecc_si &&
			host->pmecc_lmu &&
			host->pmecc_smu &&
			host->pmecc_mu &&
			host->pmecc_dmu &&
			host->pmecc_delta)
		return 0;

	/* error happened */
	pmecc_data_free(host);
	return -ENOMEM;

}

static void pmecc_gen_syndrome(struct mtd_info *mtd, int sector)
{
	struct nand_chip *nand_chip = mtd_to_nand(mtd);
	struct atmel_nand_host *host = nand_get_controller_data(nand_chip);
	int i;
	uint32_t value;

	/* Fill odd syndromes */
	for (i = 0; i < host->pmecc_corr_cap; i++) {
		value = pmecc_readl(host->pmecc, rem_port[sector].rem[i / 2]);
		if (i & 1)
			value >>= 16;
		value &= 0xffff;
		host->pmecc_partial_syn[(2 * i) + 1] = (int16_t)value;
	}
}

static void pmecc_substitute(struct mtd_info *mtd)
{
	struct nand_chip *nand_chip = mtd_to_nand(mtd);
	struct atmel_nand_host *host = nand_get_controller_data(nand_chip);
	int16_t __iomem *alpha_to = host->pmecc_alpha_to;
	int16_t __iomem *index_of = host->pmecc_index_of;
	int16_t *partial_syn = host->pmecc_partial_syn;
	const int cap = host->pmecc_corr_cap;
	int16_t *si;
	int i, j;

	/* si[] is a table that holds the current syndrome value,
	 * an element of that table belongs to the field
	 */
	si = host->pmecc_si;

	memset(&si[1], 0, sizeof(int16_t) * (2 * cap - 1));

	/* Computation 2t syndromes based on S(x) */
	/* Odd syndromes */
	for (i = 1; i < 2 * cap; i += 2) {
		for (j = 0; j < host->pmecc_degree; j++) {
			if (partial_syn[i] & (0x1 << j))
				si[i] = readw(alpha_to + i * j) ^ si[i];
		}
	}
	/* Even syndrome = (Odd syndrome) ** 2 */
	for (i = 2, j = 1; j <= cap; i = ++j << 1) {
		if (si[j] == 0) {
			si[i] = 0;
		} else {
			int16_t tmp;

			tmp = readw(index_of + si[j]);
			tmp = (tmp * 2) % host->pmecc_cw_len;
			si[i] = readw(alpha_to + tmp);
		}
	}
}

/*
 * This function defines a Berlekamp iterative procedure for
 * finding the value of the error location polynomial.
 * The input is si[], initialize by pmecc_substitute().
 * The output is smu[][].
 *
 * This function is written according to chip datasheet Chapter:
 * Find the Error Location Polynomial Sigma(x) of Section:
 * Programmable Multibit ECC Control (PMECC).
 */
static void pmecc_get_sigma(struct mtd_info *mtd)
{
	struct nand_chip *nand_chip = mtd_to_nand(mtd);
	struct atmel_nand_host *host = nand_get_controller_data(nand_chip);

	int16_t *lmu = host->pmecc_lmu;
	int16_t *si = host->pmecc_si;
	int *mu = host->pmecc_mu;
	int *dmu = host->pmecc_dmu;	/* Discrepancy */
	int *delta = host->pmecc_delta; /* Delta order */
	int cw_len = host->pmecc_cw_len;
	const int16_t cap = host->pmecc_corr_cap;
	const int num = 2 * cap + 1;
	int16_t __iomem	*index_of = host->pmecc_index_of;
	int16_t __iomem	*alpha_to = host->pmecc_alpha_to;
	int i, j, k;
	uint32_t dmu_0_count, tmp;
	int16_t *smu = host->pmecc_smu;

	/* index of largest delta */
	int ro;
	int largest;
	int diff;

	/* Init the Sigma(x) */
	memset(smu, 0, sizeof(int16_t) * num * (cap + 2));

	dmu_0_count = 0;

	/* First Row */

	/* Mu */
	mu[0] = -1;

	smu[0] = 1;

	/* discrepancy set to 1 */
	dmu[0] = 1;
	/* polynom order set to 0 */
	lmu[0] = 0;
	/* delta[0] = (mu[0] * 2 - lmu[0]) >> 1; */
	delta[0] = -1;

	/* Second Row */

	/* Mu */
	mu[1] = 0;
	/* Sigma(x) set to 1 */
	smu[num] = 1;

	/* discrepancy set to S1 */
	dmu[1] = si[1];

	/* polynom order set to 0 */
	lmu[1] = 0;

	/* delta[1] = (mu[1] * 2 - lmu[1]) >> 1; */
	delta[1] = 0;

	for (i = 1; i <= cap; i++) {
		mu[i + 1] = i << 1;
		/* Begin Computing Sigma (Mu+1) and L(mu) */
		/* check if discrepancy is set to 0 */
		if (dmu[i] == 0) {
			dmu_0_count++;

			tmp = ((cap - (lmu[i] >> 1) - 1) / 2);
			if ((cap - (lmu[i] >> 1) - 1) & 0x1)
				tmp += 2;
			else
				tmp += 1;

			if (dmu_0_count == tmp) {
				for (j = 0; j <= (lmu[i] >> 1) + 1; j++)
					smu[(cap + 1) * num + j] =
							smu[i * num + j];

				lmu[cap + 1] = lmu[i];
				return;
			}

			/* copy polynom */
			for (j = 0; j <= lmu[i] >> 1; j++)
				smu[(i + 1) * num + j] = smu[i * num + j];

			/* copy previous polynom order to the next */
			lmu[i + 1] = lmu[i];
		} else {
			ro = 0;
			largest = -1;
			/* find largest delta with dmu != 0 */
			for (j = 0; j < i; j++) {
				if ((dmu[j]) && (delta[j] > largest)) {
					largest = delta[j];
					ro = j;
				}
			}

			/* compute difference */
			diff = (mu[i] - mu[ro]);

			/* Compute degree of the new smu polynomial */
			if ((lmu[i] >> 1) > ((lmu[ro] >> 1) + diff))
				lmu[i + 1] = lmu[i];
			else
				lmu[i + 1] = ((lmu[ro] >> 1) + diff) * 2;

			/* Init smu[i+1] with 0 */
			for (k = 0; k < num; k++)
				smu[(i + 1) * num + k] = 0;

			/* Compute smu[i+1] */
			for (k = 0; k <= lmu[ro] >> 1; k++) {
				int16_t a, b, c;

				if (!(smu[ro * num + k] && dmu[i]))
					continue;
				a = readw(index_of + dmu[i]);
				b = readw(index_of + dmu[ro]);
				c = readw(index_of + smu[ro * num + k]);
				tmp = a + (cw_len - b) + c;
				a = readw(alpha_to + tmp % cw_len);
				smu[(i + 1) * num + (k + diff)] = a;
			}

			for (k = 0; k <= lmu[i] >> 1; k++)
				smu[(i + 1) * num + k] ^= smu[i * num + k];
		}

		/* End Computing Sigma (Mu+1) and L(mu) */
		/* In either case compute delta */
		delta[i + 1] = (mu[i + 1] * 2 - lmu[i + 1]) >> 1;

		/* Do not compute discrepancy for the last iteration */
		if (i >= cap)
			continue;

		for (k = 0; k <= (lmu[i + 1] >> 1); k++) {
			tmp = 2 * (i - 1);
			if (k == 0) {
				dmu[i + 1] = si[tmp + 3];
			} else if (smu[(i + 1) * num + k] && si[tmp + 3 - k]) {
				int16_t a, b, c;
				a = readw(index_of +
						smu[(i + 1) * num + k]);
				b = si[2 * (i - 1) + 3 - k];
				c = readw(index_of + b);
				tmp = a + c;
				tmp %= cw_len;
				dmu[i + 1] = readw(alpha_to + tmp) ^
					dmu[i + 1];
			}
		}
	}
}

static int pmecc_err_location(struct mtd_info *mtd)
{
	struct nand_chip *nand_chip = mtd_to_nand(mtd);
	struct atmel_nand_host *host = nand_get_controller_data(nand_chip);
	const int cap = host->pmecc_corr_cap;
	const int num = 2 * cap + 1;
	int sector_size = host->pmecc_sector_size;
	int err_nbr = 0;	/* number of error */
	int roots_nbr;		/* number of roots */
	int i;
	uint32_t val;
	int16_t *smu = host->pmecc_smu;
	int timeout = PMECC_MAX_TIMEOUT_US;

	pmecc_writel(host->pmerrloc, eldis, PMERRLOC_DISABLE);

	for (i = 0; i <= host->pmecc_lmu[cap + 1] >> 1; i++) {
		pmecc_writel(host->pmerrloc, sigma[i],
			     smu[(cap + 1) * num + i]);
		err_nbr++;
	}

	val = PMERRLOC_ELCFG_NUM_ERRORS(err_nbr - 1);
	if (sector_size == 1024)
		val |= PMERRLOC_ELCFG_SECTOR_1024;

	pmecc_writel(host->pmerrloc, elcfg, val);
	pmecc_writel(host->pmerrloc, elen,
		     sector_size * 8 + host->pmecc_degree * cap);

	while (--timeout) {
		if (pmecc_readl(host->pmerrloc, elisr) & PMERRLOC_CALC_DONE)
			break;
		WATCHDOG_RESET();
		udelay(1);
	}

	if (!timeout) {
		dev_err(mtd->dev,
			"Timeout to calculate PMECC error location\n");
		return -1;
	}

	roots_nbr = (pmecc_readl(host->pmerrloc, elisr) & PMERRLOC_ERR_NUM_MASK)
			>> 8;
	/* Number of roots == degree of smu hence <= cap */
	if (roots_nbr == host->pmecc_lmu[cap + 1] >> 1)
		return err_nbr - 1;

	/* Number of roots does not match the degree of smu
	 * unable to correct error */
	return -1;
}

static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc,
		int sector_num, int extra_bytes, int err_nbr)
{
	struct nand_chip *nand_chip = mtd_to_nand(mtd);
	struct atmel_nand_host *host = nand_get_controller_data(nand_chip);
	int i = 0;
	int byte_pos, bit_pos, sector_size, pos;
	uint32_t tmp;
	uint8_t err_byte;

	sector_size = host->pmecc_sector_size;

	while (err_nbr) {
		tmp = pmecc_readl(host->pmerrloc, el[i]) - 1;
		byte_pos = tmp / 8;
		bit_pos  = tmp % 8;

		if (byte_pos >= (sector_size + extra_bytes))
			BUG();	/* should never happen */

		if (byte_pos < sector_size) {
			err_byte = *(buf + byte_pos);
			*(buf + byte_pos) ^= (1 << bit_pos);

			pos = sector_num * host->pmecc_sector_size + byte_pos;
			dev_dbg(mtd->dev,
				"Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
				pos, bit_pos, err_byte, *(buf + byte_pos));
		} else {
			/* Bit flip in OOB area */
			tmp = sector_num * host->pmecc_bytes_per_sector
					+ (byte_pos - sector_size);
			err_byte = ecc[tmp];
			ecc[tmp] ^= (1 << bit_pos);

			pos = tmp + nand_chip->ecc.layout->eccpos[0];
			dev_dbg(mtd->dev,
				"Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
				pos, bit_pos, err_byte, ecc[tmp]);
		}

		i++;
		err_nbr--;
	}

	return;
}

static int pmecc_correction(struct mtd_info *mtd, u32 pmecc_stat, uint8_t *buf,
	u8 *ecc)
{
	struct nand_chip *nand_chip = mtd_to_nand(mtd);
	struct atmel_nand_host *host = nand_get_controller_data(nand_chip);
	int i, err_nbr;
	u8 *buf_pos, *ecc_pos;

	for (i = 0; i < host->pmecc_sector_number; i++) {
		err_nbr = 0;
		if (pmecc_stat & 0x1) {
			buf_pos = buf + i * host->pmecc_sector_size;

			pmecc_gen_syndrome(mtd, i);
			pmecc_substitute(mtd);
			pmecc_get_sigma(mtd);

			err_nbr = pmecc_err_location(mtd);
			if (err_nbr >= 0) {
				pmecc_correct_data(mtd, buf_pos, ecc, i,
						   host->pmecc_bytes_per_sector,
						   err_nbr);
			} else if (host->pmecc_version < PMECC_VERSION_SAMA5D4) {
				ecc_pos = ecc + i * host->pmecc_bytes_per_sector;

				err_nbr = nand_check_erased_ecc_chunk(
					buf_pos, host->pmecc_sector_size,
					ecc_pos, host->pmecc_bytes_per_sector,
					NULL, 0, host->pmecc_corr_cap);
			}

			if (err_nbr < 0) {
				dev_err(mtd->dev, "PMECC: Too many errors\n");
				mtd->ecc_stats.failed++;
				return -EBADMSG;
			}

			mtd->ecc_stats.corrected += err_nbr;
		}
		pmecc_stat >>= 1;
	}

	return 0;
}

static int atmel_nand_pmecc_read_page(struct mtd_info *mtd,
	struct nand_chip *chip, uint8_t *buf, int oob_required, int page)
{
	struct atmel_nand_host *host = nand_get_controller_data(chip);
	int eccsize = chip->ecc.size;
	uint8_t *oob = chip->oob_poi;
	uint32_t *eccpos = chip->ecc.layout->eccpos;
	uint32_t stat;
	int timeout = PMECC_MAX_TIMEOUT_US;

	pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_RST);
	pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_DISABLE);
	pmecc_writel(host->pmecc, cfg, ((pmecc_readl(host->pmecc, cfg))
		& ~PMECC_CFG_WRITE_OP) | PMECC_CFG_AUTO_ENABLE);

	pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_ENABLE);
	pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_DATA);

	chip->read_buf(mtd, buf, eccsize);
	chip->read_buf(mtd, oob, mtd->oobsize);

	while (--timeout) {
		if (!(pmecc_readl(host->pmecc, sr) & PMECC_SR_BUSY))
			break;
		WATCHDOG_RESET();
		udelay(1);
	}

	if (!timeout) {
		dev_err(mtd->dev, "Timeout to read PMECC page\n");
		return -1;
	}

	stat = pmecc_readl(host->pmecc, isr);
	if (stat != 0)
		if (pmecc_correction(mtd, stat, buf, &oob[eccpos[0]]) != 0)
			return -EBADMSG;

	return 0;
}

static int atmel_nand_pmecc_write_page(struct mtd_info *mtd,
		struct nand_chip *chip, const uint8_t *buf,
		int oob_required, int page)
{
	struct atmel_nand_host *host = nand_get_controller_data(chip);
	uint32_t *eccpos = chip->ecc.layout->eccpos;
	int i, j;
	int timeout = PMECC_MAX_TIMEOUT_US;

	pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_RST);
	pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_DISABLE);

	pmecc_writel(host->pmecc, cfg, (pmecc_readl(host->pmecc, cfg) |
		PMECC_CFG_WRITE_OP) & ~PMECC_CFG_AUTO_ENABLE);

	pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_ENABLE);
	pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_DATA);

	chip->write_buf(mtd, (u8 *)buf, mtd->writesize);

	while (--timeout) {
		if (!(pmecc_readl(host->pmecc, sr) & PMECC_SR_BUSY))
			break;
		WATCHDOG_RESET();
		udelay(1);
	}

	if (!timeout) {
		dev_err(mtd->dev,
			"Timeout to read PMECC status, fail to write PMECC in oob\n");
		goto out;
	}

	for (i = 0; i < host->pmecc_sector_number; i++) {
		for (j = 0; j < host->pmecc_bytes_per_sector; j++) {
			int pos;

			pos = i * host->pmecc_bytes_per_sector + j;
			chip->oob_poi[eccpos[pos]] =
				pmecc_readb(host->pmecc, ecc_port[i].ecc[j]);
		}
	}
	chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
out:
	return 0;
}

static void atmel_pmecc_core_init(struct mtd_info *mtd)
{
	struct nand_chip *nand_chip = mtd_to_nand(mtd);
	struct atmel_nand_host *host = nand_get_controller_data(nand_chip);
	uint32_t val = 0;
	struct nand_ecclayout *ecc_layout;

	pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_RST);
	pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_DISABLE);

	switch (host->pmecc_corr_cap) {
	case 2:
		val = PMECC_CFG_BCH_ERR2;
		break;
	case 4:
		val = PMECC_CFG_BCH_ERR4;
		break;
	case 8:
		val = PMECC_CFG_BCH_ERR8;
		break;
	case 12:
		val = PMECC_CFG_BCH_ERR12;
		break;
	case 24:
		val = PMECC_CFG_BCH_ERR24;
		break;
	case 32:
		val = PMECC_CFG_BCH_ERR32;
		break;
	}

	if (host->pmecc_sector_size == 512)
		val |= PMECC_CFG_SECTOR512;
	else if (host->pmecc_sector_size == 1024)
		val |= PMECC_CFG_SECTOR1024;

	switch (host->pmecc_sector_number) {
	case 1:
		val |= PMECC_CFG_PAGE_1SECTOR;
		break;
	case 2:
		val |= PMECC_CFG_PAGE_2SECTORS;
		break;
	case 4:
		val |= PMECC_CFG_PAGE_4SECTORS;
		break;
	case 8:
		val |= PMECC_CFG_PAGE_8SECTORS;
		break;
	}

	val |= (PMECC_CFG_READ_OP | PMECC_CFG_SPARE_DISABLE
		| PMECC_CFG_AUTO_DISABLE);
	pmecc_writel(host->pmecc, cfg, val);

	ecc_layout = nand_chip->ecc.layout;
	pmecc_writel(host->pmecc, sarea, mtd->oobsize - 1);
	pmecc_writel(host->pmecc, saddr, ecc_layout->eccpos[0]);
	pmecc_writel(host->pmecc, eaddr,
			ecc_layout->eccpos[ecc_layout->eccbytes - 1]);
	/* See datasheet about PMECC Clock Control Register */
	pmecc_writel(host->pmecc, clk, PMECC_CLK_133MHZ);
	pmecc_writel(host->pmecc, idr, 0xff);
	pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_ENABLE);
}

#ifdef CONFIG_SYS_NAND_ONFI_DETECTION
/*
 * pmecc_choose_ecc - Get ecc requirement from ONFI parameters. If
 *                    pmecc_corr_cap or pmecc_sector_size is 0, then set it as
 *                    ONFI ECC parameters.
 * @host: point to an atmel_nand_host structure.
 *        if host->pmecc_corr_cap is 0 then set it as the ONFI ecc_bits.
 *        if host->pmecc_sector_size is 0 then set it as the ONFI sector_size.
 * @chip: point to an nand_chip structure.
 * @cap: store the ONFI ECC correct bits capbility
 * @sector_size: in how many bytes that ONFI require to correct @ecc_bits
 *
 * Return 0 if success. otherwise return the error code.
 */
static int pmecc_choose_ecc(struct atmel_nand_host *host,
		struct nand_chip *chip,
		int *cap, int *sector_size)
{
	/* Get ECC requirement from ONFI parameters */
	*cap = *sector_size = 0;
	if (chip->onfi_version) {
		*cap = chip->ecc_strength_ds;
		*sector_size = chip->ecc_step_ds;
		pr_debug("ONFI params, minimum required ECC: %d bits in %d bytes\n",
			 *cap, *sector_size);
	}

	if (*cap == 0 && *sector_size == 0) {
		/* Non-ONFI compliant */
		dev_info(chip->mtd.dev,
			 "NAND chip is not ONFI compliant, assume ecc_bits is 2 in 512 bytes\n");
		*cap = 2;
		*sector_size = 512;
	}

	/* If head file doesn't specify then use the one in ONFI parameters */
	if (host->pmecc_corr_cap == 0) {
		/* use the most fitable ecc bits (the near bigger one ) */
		if (*cap <= 2)
			host->pmecc_corr_cap = 2;
		else if (*cap <= 4)
			host->pmecc_corr_cap = 4;
		else if (*cap <= 8)
			host->pmecc_corr_cap = 8;
		else if (*cap <= 12)
			host->pmecc_corr_cap = 12;
		else if (*cap <= 24)
			host->pmecc_corr_cap = 24;
		else
#ifdef CONFIG_SAMA5D2
			host->pmecc_corr_cap = 32;
#else
			host->pmecc_corr_cap = 24;
#endif
	}
	if (host->pmecc_sector_size == 0) {
		/* use the most fitable sector size (the near smaller one ) */
		if (*sector_size >= 1024)
			host->pmecc_sector_size = 1024;
		else if (*sector_size >= 512)
			host->pmecc_sector_size = 512;
		else
			return -EINVAL;
	}
	return 0;
}
#endif

#if defined(NO_GALOIS_TABLE_IN_ROM)
static uint16_t *pmecc_galois_table;
static inline int deg(unsigned int poly)
{
	/* polynomial degree is the most-significant bit index */
	return fls(poly) - 1;
}

static int build_gf_tables(int mm, unsigned int poly,
			   int16_t *index_of, int16_t *alpha_to)
{
	unsigned int i, x = 1;
	const unsigned int k = 1 << deg(poly);
	unsigned int nn = (1 << mm) - 1;

	/* primitive polynomial must be of degree m */
	if (k != (1u << mm))
		return -EINVAL;

	for (i = 0; i < nn; i++) {
		alpha_to[i] = x;
		index_of[x] = i;
		if (i && (x == 1))
			/* polynomial is not primitive (a^i=1 with 0<i<2^m-1) */
			return -EINVAL;
		x <<= 1;
		if (x & k)
			x ^= poly;
	}

	alpha_to[nn] = 1;
	index_of[0] = 0;

	return 0;
}

static uint16_t *create_lookup_table(int sector_size)
{
	int degree = (sector_size == 512) ?
			PMECC_GF_DIMENSION_13 :
			PMECC_GF_DIMENSION_14;
	unsigned int poly = (sector_size == 512) ?
			PMECC_GF_13_PRIMITIVE_POLY :
			PMECC_GF_14_PRIMITIVE_POLY;
	int table_size = (sector_size == 512) ?
			PMECC_INDEX_TABLE_SIZE_512 :
			PMECC_INDEX_TABLE_SIZE_1024;

	int16_t *addr = kzalloc(2 * table_size * sizeof(uint16_t), GFP_KERNEL);
	if (addr && build_gf_tables(degree, poly, addr, addr + table_size))
		return NULL;

	return (uint16_t *)addr;
}
#endif

static int atmel_pmecc_nand_init_params(struct nand_chip *nand,
		struct mtd_info *mtd)
{
	struct atmel_nand_host *host;
	int cap, sector_size;

	host = &pmecc_host;
	nand_set_controller_data(nand, host);

	nand->ecc.mode = NAND_ECC_HW;
	nand->ecc.calculate = NULL;
	nand->ecc.correct = NULL;
	nand->ecc.hwctl = NULL;

#ifdef CONFIG_SYS_NAND_ONFI_DETECTION
	host->pmecc_corr_cap = host->pmecc_sector_size = 0;

#ifdef CONFIG_PMECC_CAP
	host->pmecc_corr_cap = CONFIG_PMECC_CAP;
#endif
#ifdef CONFIG_PMECC_SECTOR_SIZE
	host->pmecc_sector_size = CONFIG_PMECC_SECTOR_SIZE;
#endif
	/* Get ECC requirement of ONFI parameters. And if CONFIG_PMECC_CAP or
	 * CONFIG_PMECC_SECTOR_SIZE not defined, then use ecc_bits, sector_size
	 * from ONFI.
	 */
	if (pmecc_choose_ecc(host, nand, &cap, &sector_size)) {
		dev_err(mtd->dev,
			"Required ECC %d bits in %d bytes not supported!\n",
			cap, sector_size);
		return -EINVAL;
	}

	if (cap > host->pmecc_corr_cap)
		dev_info(mtd->dev,
			 "WARNING: Using different ecc correct bits(%d bit) from Nand ONFI ECC reqirement (%d bit).\n",
			 host->pmecc_corr_cap, cap);
	if (sector_size < host->pmecc_sector_size)
		dev_info(mtd->dev,
			 "WARNING: Using different ecc correct sector size (%d bytes) from Nand ONFI ECC reqirement (%d bytes).\n",
			 host->pmecc_sector_size, sector_size);
#else	/* CONFIG_SYS_NAND_ONFI_DETECTION */
	host->pmecc_corr_cap = CONFIG_PMECC_CAP;
	host->pmecc_sector_size = CONFIG_PMECC_SECTOR_SIZE;
#endif

	cap = host->pmecc_corr_cap;
	sector_size = host->pmecc_sector_size;

	/* TODO: need check whether cap & sector_size is validate */
#if defined(NO_GALOIS_TABLE_IN_ROM)
	/*
	 * As pmecc_rom_base is the begin of the gallois field table, So the
	 * index offset just set as 0.
	 */
	host->pmecc_index_table_offset = 0;
#else
	if (host->pmecc_sector_size == 512)
		host->pmecc_index_table_offset = ATMEL_PMECC_INDEX_OFFSET_512;
	else
		host->pmecc_index_table_offset = ATMEL_PMECC_INDEX_OFFSET_1024;
#endif

	pr_debug("Initialize PMECC params, cap: %d, sector: %d\n",
		 cap, sector_size);

	host->pmecc = (struct pmecc_regs __iomem *) ATMEL_BASE_PMECC;
	host->pmerrloc = (struct pmecc_errloc_regs __iomem *)
			ATMEL_BASE_PMERRLOC;
#if defined(NO_GALOIS_TABLE_IN_ROM)
	pmecc_galois_table = create_lookup_table(host->pmecc_sector_size);
	if (!pmecc_galois_table) {
		dev_err(mtd->dev, "out of memory\n");
		return -ENOMEM;
	}

	host->pmecc_rom_base = (void __iomem *)pmecc_galois_table;
#else
	host->pmecc_rom_base = (void __iomem *) ATMEL_BASE_ROM;
#endif

	/* ECC is calculated for the whole page (1 step) */
	nand->ecc.size = mtd->writesize;

	/* set ECC page size and oob layout */
	switch (mtd->writesize) {
	case 2048:
	case 4096:
	case 8192:
		host->pmecc_degree = (sector_size == 512) ?
			PMECC_GF_DIMENSION_13 : PMECC_GF_DIMENSION_14;
		host->pmecc_cw_len = (1 << host->pmecc_degree) - 1;
		host->pmecc_sector_number = mtd->writesize / sector_size;
		host->pmecc_bytes_per_sector = pmecc_get_ecc_bytes(
			cap, sector_size);
		host->pmecc_alpha_to = pmecc_get_alpha_to(host);
		host->pmecc_index_of = host->pmecc_rom_base +
			host->pmecc_index_table_offset;

		nand->ecc.steps = 1;
		nand->ecc.bytes = host->pmecc_bytes_per_sector *
				       host->pmecc_sector_number;

		if (nand->ecc.bytes > MTD_MAX_ECCPOS_ENTRIES_LARGE) {
			dev_err(mtd->dev,
				"too large eccpos entries. max support ecc.bytes is %d\n",
				MTD_MAX_ECCPOS_ENTRIES_LARGE);
			return -EINVAL;
		}

		if (nand->ecc.bytes > mtd->oobsize - PMECC_OOB_RESERVED_BYTES) {
			dev_err(mtd->dev, "No room for ECC bytes\n");
			return -EINVAL;
		}
		pmecc_config_ecc_layout(&atmel_pmecc_oobinfo,
					mtd->oobsize,
					nand->ecc.bytes);
		nand->ecc.layout = &atmel_pmecc_oobinfo;
		break;
	case 512:
	case 1024:
		/* TODO */
		dev_err(mtd->dev,
			"Unsupported page size for PMECC, use Software ECC\n");
	default:
		/* page size not handled by HW ECC */
		/* switching back to soft ECC */
		nand->ecc.mode = NAND_ECC_SOFT;
		nand->ecc.read_page = NULL;
		nand->ecc.postpad = 0;
		nand->ecc.prepad = 0;
		nand->ecc.bytes = 0;
		return 0;
	}

	/* Allocate data for PMECC computation */
	if (pmecc_data_alloc(host)) {
		dev_err(mtd->dev,
			"Cannot allocate memory for PMECC computation!\n");
		return -ENOMEM;
	}

	nand->options |= NAND_NO_SUBPAGE_WRITE;
	nand->ecc.read_page = atmel_nand_pmecc_read_page;
	nand->ecc.write_page = atmel_nand_pmecc_write_page;
	nand->ecc.strength = cap;

	/* Check the PMECC ip version */
	host->pmecc_version = pmecc_readl(host->pmerrloc, version);
	dev_dbg(mtd->dev, "PMECC IP version is: %x\n", host->pmecc_version);

	atmel_pmecc_core_init(mtd);

	return 0;
}

#else

/* oob layout for large page size
 * bad block info is on bytes 0 and 1
 * the bytes have to be consecutives to avoid
 * several NAND_CMD_RNDOUT during read
 */
static struct nand_ecclayout atmel_oobinfo_large = {
	.eccbytes = 4,
	.eccpos = {60, 61, 62, 63},
	.oobfree = {
		{2, 58}
	},
};

/* oob layout for small page size
 * bad block info is on bytes 4 and 5
 * the bytes have to be consecutives to avoid
 * several NAND_CMD_RNDOUT during read
 */
static struct nand_ecclayout atmel_oobinfo_small = {
	.eccbytes = 4,
	.eccpos = {0, 1, 2, 3},
	.oobfree = {
		{6, 10}
	},
};

/*
 * Calculate HW ECC
 *
 * function called after a write
 *
 * mtd:        MTD block structure
 * dat:        raw data (unused)
 * ecc_code:   buffer for ECC
 */
static int atmel_nand_calculate(struct mtd_info *mtd,
		const u_char *dat, unsigned char *ecc_code)
{
	unsigned int ecc_value;

	/* get the first 2 ECC bytes */
	ecc_value = ecc_readl(CONFIG_SYS_NAND_ECC_BASE, PR);

	ecc_code[0] = ecc_value & 0xFF;
	ecc_code[1] = (ecc_value >> 8) & 0xFF;

	/* get the last 2 ECC bytes */
	ecc_value = ecc_readl(CONFIG_SYS_NAND_ECC_BASE, NPR) & ATMEL_ECC_NPARITY;

	ecc_code[2] = ecc_value & 0xFF;
	ecc_code[3] = (ecc_value >> 8) & 0xFF;

	return 0;
}

/*
 * HW ECC read page function
 *
 * mtd:        mtd info structure
 * chip:       nand chip info structure
 * buf:        buffer to store read data
 * oob_required:    caller expects OOB data read to chip->oob_poi
 */
static int atmel_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
				uint8_t *buf, int oob_required, int page)
{
	int eccsize = chip->ecc.size;
	int eccbytes = chip->ecc.bytes;
	uint32_t *eccpos = chip->ecc.layout->eccpos;
	uint8_t *p = buf;
	uint8_t *oob = chip->oob_poi;
	uint8_t *ecc_pos;
	int stat;

	/* read the page */
	chip->read_buf(mtd, p, eccsize);

	/* move to ECC position if needed */
	if (eccpos[0] != 0) {
		/* This only works on large pages
		 * because the ECC controller waits for
		 * NAND_CMD_RNDOUTSTART after the
		 * NAND_CMD_RNDOUT.
		 * anyway, for small pages, the eccpos[0] == 0
		 */
		chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
				mtd->writesize + eccpos[0], -1);
	}

	/* the ECC controller needs to read the ECC just after the data */
	ecc_pos = oob + eccpos[0];
	chip->read_buf(mtd, ecc_pos, eccbytes);

	/* check if there's an error */
	stat = chip->ecc.correct(mtd, p, oob, NULL);

	if (stat < 0)
		mtd->ecc_stats.failed++;
	else
		mtd->ecc_stats.corrected += stat;

	/* get back to oob start (end of page) */
	chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);

	/* read the oob */
	chip->read_buf(mtd, oob, mtd->oobsize);

	return 0;
}

/*
 * HW ECC Correction
 *
 * function called after a read
 *
 * mtd:        MTD block structure
 * dat:        raw data read from the chip
 * read_ecc:   ECC from the chip (unused)
 * isnull:     unused
 *
 * Detect and correct a 1 bit error for a page
 */
static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat,
		u_char *read_ecc, u_char *isnull)
{
	struct nand_chip *nand_chip = mtd_to_nand(mtd);
	unsigned int ecc_status;
	unsigned int ecc_word, ecc_bit;

	/* get the status from the Status Register */
	ecc_status = ecc_readl(CONFIG_SYS_NAND_ECC_BASE, SR);

	/* if there's no error */
	if (likely(!(ecc_status & ATMEL_ECC_RECERR)))
		return 0;

	/* get error bit offset (4 bits) */
	ecc_bit = ecc_readl(CONFIG_SYS_NAND_ECC_BASE, PR) & ATMEL_ECC_BITADDR;
	/* get word address (12 bits) */
	ecc_word = ecc_readl(CONFIG_SYS_NAND_ECC_BASE, PR) & ATMEL_ECC_WORDADDR;
	ecc_word >>= 4;

	/* if there are multiple errors */
	if (ecc_status & ATMEL_ECC_MULERR) {
		/* check if it is a freshly erased block
		 * (filled with 0xff) */
		if ((ecc_bit == ATMEL_ECC_BITADDR)
				&& (ecc_word == (ATMEL_ECC_WORDADDR >> 4))) {
			/* the block has just been erased, return OK */
			return 0;
		}
		/* it doesn't seems to be a freshly
		 * erased block.
		 * We can't correct so many errors */
		dev_warn(mtd->dev,
			 "multiple errors detected. Unable to correct.\n");
		return -EBADMSG;
	}

	/* if there's a single bit error : we can correct it */
	if (ecc_status & ATMEL_ECC_ECCERR) {
		/* there's nothing much to do here.
		 * the bit error is on the ECC itself.
		 */
		dev_warn(mtd->dev,
			 "one bit error on ECC code. Nothing to correct\n");
		return 0;
	}

	dev_warn(mtd->dev,
		 "one bit error on data. (word offset in the page : 0x%x bit offset : 0x%x)\n",
		 ecc_word, ecc_bit);
	/* correct the error */
	if (nand_chip->options & NAND_BUSWIDTH_16) {
		/* 16 bits words */
		((unsigned short *) dat)[ecc_word] ^= (1 << ecc_bit);
	} else {
		/* 8 bits words */
		dat[ecc_word] ^= (1 << ecc_bit);
	}
	dev_warn(mtd->dev, "error corrected\n");
	return 1;
}

/*
 * Enable HW ECC : unused on most chips
 */
static void atmel_nand_hwctl(struct mtd_info *mtd, int mode)
{
}

int atmel_hwecc_nand_init_param(struct nand_chip *nand, struct mtd_info *mtd)
{
	nand->ecc.mode = NAND_ECC_HW;
	nand->ecc.calculate = atmel_nand_calculate;
	nand->ecc.correct = atmel_nand_correct;
	nand->ecc.hwctl = atmel_nand_hwctl;
	nand->ecc.read_page = atmel_nand_read_page;
	nand->ecc.bytes = 4;
	nand->ecc.strength = 4;

	if (nand->ecc.mode == NAND_ECC_HW) {
		/* ECC is calculated for the whole page (1 step) */
		nand->ecc.size = mtd->writesize;

		/* set ECC page size and oob layout */
		switch (mtd->writesize) {
		case 512:
			nand->ecc.layout = &atmel_oobinfo_small;
			ecc_writel(CONFIG_SYS_NAND_ECC_BASE, MR,
					ATMEL_ECC_PAGESIZE_528);
			break;
		case 1024:
			nand->ecc.layout = &atmel_oobinfo_large;
			ecc_writel(CONFIG_SYS_NAND_ECC_BASE, MR,
					ATMEL_ECC_PAGESIZE_1056);
			break;
		case 2048:
			nand->ecc.layout = &atmel_oobinfo_large;
			ecc_writel(CONFIG_SYS_NAND_ECC_BASE, MR,
					ATMEL_ECC_PAGESIZE_2112);
			break;
		case 4096:
			nand->ecc.layout = &atmel_oobinfo_large;
			ecc_writel(CONFIG_SYS_NAND_ECC_BASE, MR,
					ATMEL_ECC_PAGESIZE_4224);
			break;
		default:
			/* page size not handled by HW ECC */
			/* switching back to soft ECC */
			nand->ecc.mode = NAND_ECC_SOFT;
			nand->ecc.calculate = NULL;
			nand->ecc.correct = NULL;
			nand->ecc.hwctl = NULL;
			nand->ecc.read_page = NULL;
			nand->ecc.postpad = 0;
			nand->ecc.prepad = 0;
			nand->ecc.bytes = 0;
			break;
		}
	}

	return 0;
}

#endif /* CONFIG_ATMEL_NAND_HW_PMECC */

#endif /* CONFIG_ATMEL_NAND_HWECC */

static void at91_nand_hwcontrol(struct mtd_info *mtd,
					 int cmd, unsigned int ctrl)
{
	struct nand_chip *this = mtd_to_nand(mtd);

	if (ctrl & NAND_CTRL_CHANGE) {
		ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
		IO_ADDR_W &= ~(CONFIG_SYS_NAND_MASK_ALE
			     | CONFIG_SYS_NAND_MASK_CLE);

		if (ctrl & NAND_CLE)
			IO_ADDR_W |= CONFIG_SYS_NAND_MASK_CLE;
		if (ctrl & NAND_ALE)
			IO_ADDR_W |= CONFIG_SYS_NAND_MASK_ALE;

#ifdef CONFIG_SYS_NAND_ENABLE_PIN
		at91_set_gpio_value(CONFIG_SYS_NAND_ENABLE_PIN,
				    !(ctrl & NAND_NCE));
#endif
		this->IO_ADDR_W = (void *) IO_ADDR_W;
	}

	if (cmd != NAND_CMD_NONE)
		writeb(cmd, this->IO_ADDR_W);
}

#ifdef CONFIG_SYS_NAND_READY_PIN
static int at91_nand_ready(struct mtd_info *mtd)
{
	return at91_get_gpio_value(CONFIG_SYS_NAND_READY_PIN);
}
#endif

#ifdef CONFIG_SPL_BUILD
/* The following code is for SPL */
static struct mtd_info *mtd;
static struct nand_chip nand_chip;

static int nand_command(int block, int page, uint32_t offs, u8 cmd)
{
	struct nand_chip *this = mtd_to_nand(mtd);
	int page_addr = page + block * CONFIG_SYS_NAND_PAGE_COUNT;
	void (*hwctrl)(struct mtd_info *mtd, int cmd,
			unsigned int ctrl) = this->cmd_ctrl;

	while (!this->dev_ready(mtd))
		;

	if (cmd == NAND_CMD_READOOB) {
		offs += CONFIG_SYS_NAND_PAGE_SIZE;
		cmd = NAND_CMD_READ0;
	}

	hwctrl(mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE);

	if ((this->options & NAND_BUSWIDTH_16) && !nand_opcode_8bits(cmd))
		offs >>= 1;

	hwctrl(mtd, offs & 0xff, NAND_CTRL_ALE | NAND_CTRL_CHANGE);
	hwctrl(mtd, (offs >> 8) & 0xff, NAND_CTRL_ALE);
	hwctrl(mtd, (page_addr & 0xff), NAND_CTRL_ALE);
	hwctrl(mtd, ((page_addr >> 8) & 0xff), NAND_CTRL_ALE);
#ifdef CONFIG_SYS_NAND_5_ADDR_CYCLE
	hwctrl(mtd, (page_addr >> 16) & 0x0f, NAND_CTRL_ALE);
#endif
	hwctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);

	hwctrl(mtd, NAND_CMD_READSTART, NAND_CTRL_CLE | NAND_CTRL_CHANGE);
	hwctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);

	while (!this->dev_ready(mtd))
		;

	return 0;
}

static int nand_is_bad_block(int block)
{
	struct nand_chip *this = mtd_to_nand(mtd);

	nand_command(block, 0, CONFIG_SYS_NAND_BAD_BLOCK_POS, NAND_CMD_READOOB);

	if (this->options & NAND_BUSWIDTH_16) {
		if (readw(this->IO_ADDR_R) != 0xffff)
			return 1;
	} else {
		if (readb(this->IO_ADDR_R) != 0xff)
			return 1;
	}

	return 0;
}

#ifdef CONFIG_SPL_NAND_ECC
static int nand_ecc_pos[] = CONFIG_SYS_NAND_ECCPOS;
#define ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / \
		  CONFIG_SYS_NAND_ECCSIZE)
#define ECCTOTAL (ECCSTEPS * CONFIG_SYS_NAND_ECCBYTES)

static int nand_read_page(int block, int page, void *dst)
{
	struct nand_chip *this = mtd_to_nand(mtd);
	u_char ecc_calc[ECCTOTAL];
	u_char ecc_code[ECCTOTAL];
	u_char oob_data[CONFIG_SYS_NAND_OOBSIZE];
	int eccsize = CONFIG_SYS_NAND_ECCSIZE;
	int eccbytes = CONFIG_SYS_NAND_ECCBYTES;
	int eccsteps = ECCSTEPS;
	int i;
	uint8_t *p = dst;
	nand_command(block, page, 0, NAND_CMD_READ0);

	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
		if (this->ecc.mode != NAND_ECC_SOFT)
			this->ecc.hwctl(mtd, NAND_ECC_READ);
		this->read_buf(mtd, p, eccsize);
		this->ecc.calculate(mtd, p, &ecc_calc[i]);
	}
	this->read_buf(mtd, oob_data, CONFIG_SYS_NAND_OOBSIZE);

	for (i = 0; i < ECCTOTAL; i++)
		ecc_code[i] = oob_data[nand_ecc_pos[i]];

	eccsteps = ECCSTEPS;
	p = dst;

	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
		this->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);

	return 0;
}

int spl_nand_erase_one(int block, int page)
{
	struct nand_chip *this = mtd_to_nand(mtd);
	void (*hwctrl)(struct mtd_info *mtd, int cmd,
			unsigned int ctrl) = this->cmd_ctrl;
	int page_addr;

	if (nand_chip.select_chip)
		nand_chip.select_chip(mtd, 0);

	page_addr = page + block * CONFIG_SYS_NAND_PAGE_COUNT;
	hwctrl(mtd, NAND_CMD_ERASE1, NAND_CTRL_CLE | NAND_CTRL_CHANGE);
	/* Row address */
	hwctrl(mtd, (page_addr & 0xff), NAND_CTRL_ALE | NAND_CTRL_CHANGE);
	hwctrl(mtd, ((page_addr >> 8) & 0xff),
	       NAND_CTRL_ALE | NAND_CTRL_CHANGE);
#ifdef CONFIG_SYS_NAND_5_ADDR_CYCLE
	/* One more address cycle for devices > 128MiB */
	hwctrl(mtd, (page_addr >> 16) & 0x0f,
	       NAND_CTRL_ALE | NAND_CTRL_CHANGE);
#endif
	hwctrl(mtd, NAND_CMD_ERASE2, NAND_CTRL_CLE | NAND_CTRL_CHANGE);

	while (!this->dev_ready(mtd))
		;

	nand_deselect();

	return 0;
}
#else
static int nand_read_page(int block, int page, void *dst)
{
	struct nand_chip *this = mtd_to_nand(mtd);

	nand_command(block, page, 0, NAND_CMD_READ0);
	atmel_nand_pmecc_read_page(mtd, this, dst, 0, page);

	return 0;
}
#endif /* CONFIG_SPL_NAND_ECC */

int at91_nand_wait_ready(struct mtd_info *mtd)
{
	struct nand_chip *this = mtd_to_nand(mtd);

	udelay(this->chip_delay);

	return 1;
}

int board_nand_init(struct nand_chip *nand)
{
	int ret = 0;

	nand->ecc.mode = NAND_ECC_SOFT;
#ifdef CONFIG_SYS_NAND_DBW_16
	nand->options = NAND_BUSWIDTH_16;
	nand->read_buf = nand_read_buf16;
#else
	nand->read_buf = nand_read_buf;
#endif
	nand->cmd_ctrl = at91_nand_hwcontrol;
#ifdef CONFIG_SYS_NAND_READY_PIN
	nand->dev_ready = at91_nand_ready;
#else
	nand->dev_ready = at91_nand_wait_ready;
#endif
	nand->chip_delay = 20;
#ifdef CONFIG_SYS_NAND_USE_FLASH_BBT
	nand->bbt_options |= NAND_BBT_USE_FLASH;
#endif

#ifdef CONFIG_ATMEL_NAND_HWECC
#ifdef CONFIG_ATMEL_NAND_HW_PMECC
	ret = atmel_pmecc_nand_init_params(nand, mtd);
#endif
#endif

	return ret;
}

void nand_init(void)
{
	mtd = nand_to_mtd(&nand_chip);
	mtd->writesize = CONFIG_SYS_NAND_PAGE_SIZE;
	mtd->oobsize = CONFIG_SYS_NAND_OOBSIZE;
	nand_chip.IO_ADDR_R = (void __iomem *)CONFIG_SYS_NAND_BASE;
	nand_chip.IO_ADDR_W = (void __iomem *)CONFIG_SYS_NAND_BASE;
	board_nand_init(&nand_chip);

#ifdef CONFIG_SPL_NAND_ECC
	if (nand_chip.ecc.mode == NAND_ECC_SOFT) {
		nand_chip.ecc.calculate = nand_calculate_ecc;
		nand_chip.ecc.correct = nand_correct_data;
	}
#endif

	if (nand_chip.select_chip)
		nand_chip.select_chip(mtd, 0);
}

void nand_deselect(void)
{
	if (nand_chip.select_chip)
		nand_chip.select_chip(mtd, -1);
}

#include "nand_spl_loaders.c"

#else

#ifndef CONFIG_SYS_NAND_BASE_LIST
#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
#endif
static struct nand_chip nand_chip[CONFIG_SYS_MAX_NAND_DEVICE];
static ulong base_addr[CONFIG_SYS_MAX_NAND_DEVICE] = CONFIG_SYS_NAND_BASE_LIST;

int atmel_nand_chip_init(int devnum, ulong base_addr)
{
	int ret;
	struct nand_chip *nand = &nand_chip[devnum];
	struct mtd_info *mtd = nand_to_mtd(nand);

	nand->IO_ADDR_R = nand->IO_ADDR_W = (void  __iomem *)base_addr;

#ifdef CONFIG_NAND_ECC_BCH
	nand->ecc.mode = NAND_ECC_SOFT_BCH;
#else
	nand->ecc.mode = NAND_ECC_SOFT;
#endif
#ifdef CONFIG_SYS_NAND_DBW_16
	nand->options = NAND_BUSWIDTH_16;
#endif
	nand->cmd_ctrl = at91_nand_hwcontrol;
#ifdef CONFIG_SYS_NAND_READY_PIN
	nand->dev_ready = at91_nand_ready;
#endif
	nand->chip_delay = 75;
#ifdef CONFIG_SYS_NAND_USE_FLASH_BBT
	nand->bbt_options |= NAND_BBT_USE_FLASH;
#endif

	ret = nand_scan_ident(mtd, CONFIG_SYS_NAND_MAX_CHIPS, NULL);
	if (ret)
		return ret;

#ifdef CONFIG_ATMEL_NAND_HWECC
#ifdef CONFIG_ATMEL_NAND_HW_PMECC
	ret = atmel_pmecc_nand_init_params(nand, mtd);
#else
	ret = atmel_hwecc_nand_init_param(nand, mtd);
#endif
	if (ret)
		return ret;
#endif

	ret = nand_scan_tail(mtd);
	if (!ret)
		nand_register(devnum, mtd);

	return ret;
}

void board_nand_init(void)
{
	int i;
	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
		if (atmel_nand_chip_init(i, base_addr[i]))
			log_err("atmel_nand: Fail to initialize #%d chip", i);
}
#endif /* CONFIG_SPL_BUILD */