| CONFIG_ARM=y |
| CONFIG_ARCH_IMX8=y |
| CONFIG_TEXT_BASE=0x80020000 |
| CONFIG_SYS_MALLOC_LEN=0x2400000 |
| CONFIG_SYS_MALLOC_F_LEN=0x4000 |
| CONFIG_SPL_GPIO=y |
| CONFIG_SPL_LIBCOMMON_SUPPORT=y |
| CONFIG_SPL_LIBGENERIC_SUPPORT=y |
| CONFIG_NR_DRAM_BANKS=3 |
| CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y |
| CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 |
| CONFIG_ENV_SIZE=0x1000 |
| CONFIG_ENV_OFFSET=0x400000 |
| CONFIG_DM_GPIO=y |
| CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8qxp-mek" |
| CONFIG_TARGET_IMX8QXP_MEK=y |
| CONFIG_SPL_MMC=y |
| CONFIG_SPL_SERIAL=y |
| CONFIG_SPL_DRIVERS_MISC=y |
| CONFIG_SPL_STACK=0x13e000 |
| CONFIG_SPL_TEXT_BASE=0x100000 |
| CONFIG_SPL_HAS_BSS_LINKER_SECTION=y |
| CONFIG_SPL_BSS_START_ADDR=0x128000 |
| CONFIG_SPL_BSS_MAX_SIZE=0x1000 |
| CONFIG_SYS_BOOTM_LEN=0x800000 |
| CONFIG_SYS_LOAD_ADDR=0x80280000 |
| CONFIG_SPL=y |
| CONFIG_REMAKE_ELF=y |
| # CONFIG_EFI_LOADER is not set |
| CONFIG_FIT=y |
| CONFIG_FIT_EXTERNAL_OFFSET=0x3000 |
| CONFIG_BOOTDELAY=3 |
| CONFIG_OF_BOARD_SETUP=y |
| CONFIG_OF_SYSTEM_SETUP=y |
| CONFIG_USE_BOOTCOMMAND=y |
| CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if test ${sec_boot} = yes; then if run loadcntr; then run mmcboot; else run netboot; fi; else if run loadimage; then run mmcboot; else run netboot; fi; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi" |
| CONFIG_SYS_CBSIZE=2048 |
| CONFIG_SYS_PBSIZE=2068 |
| CONFIG_LOG=y |
| CONFIG_BOARD_EARLY_INIT_F=y |
| CONFIG_SPL_MAX_SIZE=0x1f000 |
| CONFIG_SPL_BOARD_INIT=y |
| # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set |
| # CONFIG_SPL_LEGACY_IMAGE_FORMAT is not set |
| CONFIG_SPL_LOAD_IMX_CONTAINER=y |
| CONFIG_IMX_CONTAINER_CFG="board/freescale/imx8qxp_mek/uboot-container.cfg" |
| CONFIG_SPL_SYS_MALLOC_SIMPLE=y |
| # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set |
| CONFIG_SPL_SYS_MALLOC=y |
| CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y |
| CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x120000 |
| CONFIG_SPL_SYS_MALLOC_SIZE=0x3000 |
| CONFIG_SPL_SYS_MMCSD_RAW_MODE=y |
| CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800 |
| CONFIG_SPL_POWER_DOMAIN=y |
| CONFIG_HUSH_PARSER=y |
| CONFIG_CMD_CPU=y |
| # CONFIG_BOOTM_NETBSD is not set |
| # CONFIG_CMD_EXPORTENV is not set |
| # CONFIG_CMD_IMPORTENV is not set |
| # CONFIG_CMD_CRC32 is not set |
| CONFIG_CMD_CLK=y |
| CONFIG_CMD_DM=y |
| CONFIG_CMD_FUSE=y |
| CONFIG_CMD_GPIO=y |
| CONFIG_CMD_I2C=y |
| CONFIG_CMD_MMC=y |
| CONFIG_CMD_DHCP=y |
| CONFIG_CMD_MII=y |
| CONFIG_CMD_PING=y |
| CONFIG_CMD_CACHE=y |
| CONFIG_CMD_FAT=y |
| CONFIG_SPL_OF_CONTROL=y |
| CONFIG_ENV_OVERWRITE=y |
| CONFIG_ENV_IS_IN_MMC=y |
| CONFIG_SYS_RELOC_GD_ENV_ADDR=y |
| CONFIG_SYS_MMC_ENV_DEV=1 |
| CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y |
| CONFIG_NET_RANDOM_ETHADDR=y |
| CONFIG_SPL_DM=y |
| CONFIG_SPL_CLK=y |
| CONFIG_CLK_IMX8=y |
| CONFIG_CPU=y |
| CONFIG_MXC_GPIO=y |
| CONFIG_DM_PCA953X=y |
| CONFIG_DM_I2C=y |
| CONFIG_SYS_I2C_IMX_LPI2C=y |
| CONFIG_I2C_MUX=y |
| CONFIG_I2C_MUX_PCA954x=y |
| CONFIG_SUPPORT_EMMC_BOOT=y |
| CONFIG_FSL_USDHC=y |
| CONFIG_PHYLIB=y |
| CONFIG_PHY_ADDR_ENABLE=y |
| CONFIG_PHY_ATHEROS=y |
| CONFIG_PHY_GIGE=y |
| CONFIG_FEC_MXC_SHARE_MDIO=y |
| CONFIG_FEC_MXC_MDIO_BASE=0x5B040000 |
| CONFIG_FEC_MXC=y |
| CONFIG_MII=y |
| CONFIG_PINCTRL=y |
| CONFIG_SPL_PINCTRL=y |
| CONFIG_PINCTRL_IMX8=y |
| CONFIG_POWER_DOMAIN=y |
| CONFIG_IMX8_POWER_DOMAIN=y |
| CONFIG_DM_REGULATOR=y |
| CONFIG_SPL_DM_REGULATOR=y |
| CONFIG_DM_REGULATOR_FIXED=y |
| CONFIG_DM_REGULATOR_GPIO=y |
| CONFIG_SPL_DM_REGULATOR_GPIO=y |
| CONFIG_DM_SERIAL=y |
| CONFIG_FSL_LPUART=y |
| CONFIG_DM_THERMAL=y |
| CONFIG_IMX_SCU_THERMAL=y |
| CONFIG_SPL_TINY_MEMSET=y |