Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / df41fc634d9e2e7899dc1023a7390708e6d8b886 / . / drivers / usb / gadget / ep0.c
blob: 9d08640ff23ac4972512046589ef8a240c719060 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2003
* Gerry Hamel, geh@ti.com, Texas Instruments
*
* (C) Copyright 2006
* Bryan O'Donoghue, deckard@CodeHermit.ie
*
* Based on
* linux/drivers/usbd/ep0.c
*
* Copyright (c) 2000, 2001, 2002 Lineo
* Copyright (c) 2001 Hewlett Packard
*
* By:
* Stuart Lynne <sl@lineo.com>,
* Tom Rushworth <tbr@lineo.com>,
* Bruce Balden <balden@lineo.com>
*/
/*
* This is the builtin ep0 control function. It implements all required functionality
* for responding to control requests (SETUP packets).
*
* XXX
*
* Currently we do not pass any SETUP packets (or other) to the configured
* function driver. This may need to change.
*
* XXX
*
* As alluded to above, a simple callback cdc_recv_setup has been implemented
* in the usb_device data structure to facilicate passing
* Common Device Class packets to a function driver.
*
* XXX
*/
#include <serial.h>
#include <usbdevice.h>
#if 0
#define dbg_ep0(lvl,fmt,args...) serial_printf("[%s] %s:%d: "fmt"\n",__FILE__,__FUNCTION__,__LINE__,##args)
#else
#define dbg_ep0(lvl,fmt,args...)
#endif
__maybe_unused static char *usbd_device_descriptors[] = {
"UNKNOWN", /* 0 */
"DEVICE", /* 1 */
"CONFIG", /* 2 */
"STRING", /* 3 */
"INTERFACE", /* 4 */
"ENDPOINT", /* 5 */
"DEVICE QUALIFIER", /* 6 */
"OTHER SPEED", /* 7 */
"INTERFACE POWER", /* 8 */
};
#define USBD_DEVICE_DESCRIPTORS(x) (((unsigned int)x <= USB_DESCRIPTOR_TYPE_INTERFACE_POWER) ? \
usbd_device_descriptors[x] : "UNKNOWN")
__maybe_unused static char *usbd_device_states[] = {
"STATE_INIT",
"STATE_CREATED",
"STATE_ATTACHED",
"STATE_POWERED",
"STATE_DEFAULT",
"STATE_ADDRESSED",
"STATE_CONFIGURED",
"STATE_UNKNOWN",
};
#define USBD_DEVICE_STATE(x) (((unsigned int)x <= STATE_UNKNOWN) ? usbd_device_states[x] : "UNKNOWN")
__maybe_unused static char *usbd_device_requests[] = {
"GET STATUS", /* 0 */
"CLEAR FEATURE", /* 1 */
"RESERVED", /* 2 */
"SET FEATURE", /* 3 */
"RESERVED", /* 4 */
"SET ADDRESS", /* 5 */
"GET DESCRIPTOR", /* 6 */
"SET DESCRIPTOR", /* 7 */
"GET CONFIGURATION", /* 8 */
"SET CONFIGURATION", /* 9 */
"GET INTERFACE", /* 10 */
"SET INTERFACE", /* 11 */
"SYNC FRAME", /* 12 */
};
#define USBD_DEVICE_REQUESTS(x) (((unsigned int)x <= USB_REQ_SYNCH_FRAME) ? usbd_device_requests[x] : "UNKNOWN")
/* EP0 Configuration Set ********************************************************************* */
/**
* ep0_get_status - fill in URB data with appropriate status
* @device:
* @urb:
* @index:
* @requesttype:
*
*/
static int ep0_get_status (struct usb_device_instance *device,
struct urb *urb, int index, int requesttype)
{
char *cp;
urb->actual_length = 2;
cp = (char*)urb->buffer;
cp[0] = cp[1] = 0;
switch (requesttype) {
case USB_REQ_RECIPIENT_DEVICE:
cp[0] = USB_STATUS_SELFPOWERED;
break;
case USB_REQ_RECIPIENT_INTERFACE:
break;
case USB_REQ_RECIPIENT_ENDPOINT:
cp[0] = usbd_endpoint_halted (device, index);
break;
case USB_REQ_RECIPIENT_OTHER:
urb->actual_length = 0;
default:
break;
}
dbg_ep0 (2, "%02x %02x", cp[0], cp[1]);
return 0;
}
/**
* ep0_get_one
* @device:
* @urb:
* @result:
*
* Set a single byte value in the urb send buffer. Return non-zero to signal
* a request error.
*/
static int ep0_get_one (struct usb_device_instance *device, struct urb *urb,
__u8 result)
{
urb->actual_length = 1; /* XXX 2? */
((char *) urb->buffer)[0] = result;
return 0;
}
/**
* copy_config
* @urb: pointer to urb
* @data: pointer to configuration data
* @length: length of data
*
* Copy configuration data to urb transfer buffer if there is room for it.
*/
void copy_config (struct urb *urb, void *data, int max_length,
int max_buf)
{
int available;
int length;
/*dbg_ep0(3, "-> actual: %d buf: %d max_buf: %d max_length: %d data: %p", */
/* urb->actual_length, urb->buffer_length, max_buf, max_length, data); */
if (!data) {
dbg_ep0 (1, "data is NULL");
return;
}
length = max_length;
if (length > max_length) {
dbg_ep0 (1, "length: %d >= max_length: %d", length,
max_length);
return;
}
/*dbg_ep0(1, " actual: %d buf: %d max_buf: %d max_length: %d length: %d", */
/* urb->actual_length, urb->buffer_length, max_buf, max_length, length); */
if ((available =
/*urb->buffer_length */ max_buf - urb->actual_length) <= 0) {
return;
}
/*dbg_ep0(1, "actual: %d buf: %d max_buf: %d length: %d available: %d", */
/* urb->actual_length, urb->buffer_length, max_buf, length, available); */
if (length > available) {
length = available;
}
/*dbg_ep0(1, "actual: %d buf: %d max_buf: %d length: %d available: %d", */
/* urb->actual_length, urb->buffer_length, max_buf, length, available); */
memcpy (urb->buffer + urb->actual_length, data, length);
urb->actual_length += length;
dbg_ep0 (3,
"copy_config: <- actual: %d buf: %d max_buf: %d max_length: %d available: %d",
urb->actual_length, urb->buffer_length, max_buf, max_length,
available);
}
/**
* ep0_get_descriptor
* @device:
* @urb:
* @max:
* @descriptor_type:
* @index:
*
* Called by ep0_rx_process for a get descriptor device command. Determine what
* descriptor is being requested, copy to send buffer. Return zero if ok to send,
* return non-zero to signal a request error.
*/
static int ep0_get_descriptor (struct usb_device_instance *device,
struct urb *urb, int max, int descriptor_type,
int index)
{
int port = 0; /* XXX compound device */
/*dbg_ep0(3, "max: %x type: %x index: %x", max, descriptor_type, index); */
if (!urb || !urb->buffer || !urb->buffer_length
|| (urb->buffer_length < 255)) {
dbg_ep0 (2, "invalid urb %p", urb);
return -1L;
}
/* setup tx urb */
urb->actual_length = 0;
dbg_ep0 (2, "%s", USBD_DEVICE_DESCRIPTORS (descriptor_type));
switch (descriptor_type) {
case USB_DESCRIPTOR_TYPE_DEVICE:
{
struct usb_device_descriptor *device_descriptor;
if (!
(device_descriptor =
usbd_device_device_descriptor (device, port))) {
return -1;
}
/* copy descriptor for this device */
copy_config (urb, device_descriptor,
sizeof (struct usb_device_descriptor),
max);
/* correct the correct control endpoint 0 max packet size into the descriptor */
device_descriptor =
(struct usb_device_descriptor *) urb->buffer;
}
dbg_ep0(3, "copied device configuration, actual_length: 0x%x", urb->actual_length);
break;
case USB_DESCRIPTOR_TYPE_CONFIGURATION:
{
struct usb_configuration_descriptor
*configuration_descriptor;
struct usb_device_descriptor *device_descriptor;
if (!
(device_descriptor =
usbd_device_device_descriptor (device, port))) {
return -1;
}
/*dbg_ep0(2, "%d %d", index, device_descriptor->bNumConfigurations); */
if (index >= device_descriptor->bNumConfigurations) {
dbg_ep0 (0, "index too large: %d >= %d", index,
device_descriptor->
bNumConfigurations);
return -1;
}
if (!
(configuration_descriptor =
usbd_device_configuration_descriptor (device,
port,
index))) {
dbg_ep0 (0,
"usbd_device_configuration_descriptor failed: %d",
index);
return -1;
}
dbg_ep0(0, "attempt to copy %d bytes to urb\n",cpu_to_le16(configuration_descriptor->wTotalLength));
copy_config (urb, configuration_descriptor,
cpu_to_le16(configuration_descriptor->wTotalLength),
max);
}
break;
case USB_DESCRIPTOR_TYPE_STRING:
{
struct usb_string_descriptor *string_descriptor;
if (!(string_descriptor = usbd_get_string (index))) {
dbg_ep0(0, "Invalid string index %d\n", index);
return -1;
}
dbg_ep0(3, "string_descriptor: %p length %d", string_descriptor, string_descriptor->bLength);
copy_config (urb, string_descriptor, string_descriptor->bLength, max);
}
break;
case USB_DESCRIPTOR_TYPE_INTERFACE:
dbg_ep0(2, "USB_DESCRIPTOR_TYPE_INTERFACE - error not implemented\n");
return -1;
case USB_DESCRIPTOR_TYPE_ENDPOINT:
dbg_ep0(2, "USB_DESCRIPTOR_TYPE_ENDPOINT - error not implemented\n");
return -1;
case USB_DESCRIPTOR_TYPE_HID:
{
dbg_ep0(2, "USB_DESCRIPTOR_TYPE_HID - error not implemented\n");
return -1; /* unsupported at this time */
#if 0
int bNumInterface =
le16_to_cpu (urb->device_request.wIndex);
int bAlternateSetting = 0;
int class = 0;
struct usb_class_descriptor *class_descriptor;
if (!(class_descriptor =
usbd_device_class_descriptor_index (device,
port, 0,
bNumInterface,
bAlternateSetting,
class))
|| class_descriptor->descriptor.hid.bDescriptorType != USB_DT_HID) {
dbg_ep0 (3, "[%d] interface is not HID",
bNumInterface);
return -1;
}
/* copy descriptor for this class */
copy_config (urb, class_descriptor,
class_descriptor->descriptor.hid.bLength,
max);
#endif
}
break;
case USB_DESCRIPTOR_TYPE_REPORT:
{
dbg_ep0(2, "USB_DESCRIPTOR_TYPE_REPORT - error not implemented\n");
return -1; /* unsupported at this time */
#if 0
int bNumInterface =
le16_to_cpu (urb->device_request.wIndex);
int bAlternateSetting = 0;
int class = 0;
struct usb_class_report_descriptor *report_descriptor;
if (!(report_descriptor =
usbd_device_class_report_descriptor_index
(device, port, 0, bNumInterface,
bAlternateSetting, class))
|| report_descriptor->bDescriptorType !=
USB_DT_REPORT) {
dbg_ep0 (3, "[%d] descriptor is not REPORT",
bNumInterface);
return -1;
}
/* copy report descriptor for this class */
/*copy_config(urb, &report_descriptor->bData[0], report_descriptor->wLength, max); */
if (max - urb->actual_length > 0) {
int length =
min(report_descriptor->wLength,
max - urb->actual_length);
memcpy (urb->buffer + urb->actual_length,
&report_descriptor->bData[0], length);
urb->actual_length += length;
}
#endif
}
break;
case USB_DESCRIPTOR_TYPE_DEVICE_QUALIFIER:
return -1;
default:
return -1;
}
dbg_ep0 (1, "urb: buffer: %p buffer_length: %2d actual_length: %2d tx_packetSize: %2d",
urb->buffer, urb->buffer_length, urb->actual_length,
device->bus->endpoint_array[0].tx_packetSize);
/*
if ((urb->actual_length < max) && !(urb->actual_length % device->bus->endpoint_array[0].tx_packetSize)) {
dbg_ep0(0, "adding null byte");
urb->buffer[urb->actual_length++] = 0;
dbg_ep0(0, "urb: buffer_length: %2d actual_length: %2d packet size: %2d",
urb->buffer_length, urb->actual_length device->bus->endpoint_array[0].tx_packetSize);
}
*/
return 0;
}
/**
* ep0_recv_setup - called to indicate URB has been received
* @urb: pointer to struct urb
*
* Check if this is a setup packet, process the device request, put results
* back into the urb and return zero or non-zero to indicate success (DATA)
* or failure (STALL).
*
*/
int ep0_recv_setup (struct urb *urb)
{
/*struct usb_device_request *request = urb->buffer; */
/*struct usb_device_instance *device = urb->device; */
struct usb_device_request *request;
struct usb_device_instance *device;
int address;
dbg_ep0 (0, "entering ep0_recv_setup()");
if (!urb || !urb->device) {
dbg_ep0 (3, "invalid URB %p", urb);
return -1;
}
request = &urb->device_request;
device = urb->device;
dbg_ep0 (3, "urb: %p device: %p", urb, urb->device);
/*dbg_ep0(2, "- - - - - - - - - -"); */
dbg_ep0 (2,
"bmRequestType:%02x bRequest:%02x wValue:%04x wIndex:%04x wLength:%04x %s",
request->bmRequestType, request->bRequest,
le16_to_cpu (request->wValue), le16_to_cpu (request->wIndex),
le16_to_cpu (request->wLength),
USBD_DEVICE_REQUESTS (request->bRequest));
/* handle USB Standard Request (c.f. USB Spec table 9-2) */
if ((request->bmRequestType & USB_REQ_TYPE_MASK) != 0) {
if(device->device_state <= STATE_CONFIGURED){
/* Attempt to handle a CDC specific request if we are
* in the configured state.
*/
return device->cdc_recv_setup(request,urb);
}
dbg_ep0 (1, "non standard request: %x",
request->bmRequestType & USB_REQ_TYPE_MASK);
return -1; /* Stall here */
}
switch (device->device_state) {
case STATE_CREATED:
case STATE_ATTACHED:
case STATE_POWERED:
/* It actually is important to allow requests in these states,
* Windows will request descriptors before assigning an
* address to the client.
*/
/*dbg_ep0 (1, "request %s not allowed in this state: %s", */
/* USBD_DEVICE_REQUESTS(request->bRequest), */
/* usbd_device_states[device->device_state]); */
/*return -1; */
break;
case STATE_INIT:
case STATE_DEFAULT:
switch (request->bRequest) {
case USB_REQ_GET_STATUS:
case USB_REQ_GET_INTERFACE:
case USB_REQ_SYNCH_FRAME: /* XXX should never see this (?) */
case USB_REQ_CLEAR_FEATURE:
case USB_REQ_SET_FEATURE:
case USB_REQ_SET_DESCRIPTOR:
/* case USB_REQ_SET_CONFIGURATION: */
case USB_REQ_SET_INTERFACE:
dbg_ep0 (1,
"request %s not allowed in DEFAULT state: %s",
USBD_DEVICE_REQUESTS (request->bRequest),
usbd_device_states[device->device_state]);
return -1;
case USB_REQ_SET_CONFIGURATION:
case USB_REQ_SET_ADDRESS:
case USB_REQ_GET_DESCRIPTOR:
case USB_REQ_GET_CONFIGURATION:
break;
}
case STATE_ADDRESSED:
case STATE_CONFIGURED:
break;
case STATE_UNKNOWN:
dbg_ep0 (1, "request %s not allowed in UNKNOWN state: %s",
USBD_DEVICE_REQUESTS (request->bRequest),
usbd_device_states[device->device_state]);
return -1;
}
/* handle all requests that return data (direction bit set on bm RequestType) */
if ((request->bmRequestType & USB_REQ_DIRECTION_MASK)) {
dbg_ep0 (3, "Device-to-Host");
switch (request->bRequest) {
case USB_REQ_GET_STATUS:
return ep0_get_status (device, urb, request->wIndex,
request->bmRequestType &
USB_REQ_RECIPIENT_MASK);
case USB_REQ_GET_DESCRIPTOR:
return ep0_get_descriptor (device, urb,
le16_to_cpu (request->wLength),
le16_to_cpu (request->wValue) >> 8,
le16_to_cpu (request->wValue) & 0xff);
case USB_REQ_GET_CONFIGURATION:
dbg_ep0(2, "get config %d\n", device->configuration);
return ep0_get_one (device, urb,
device->configuration);
case USB_REQ_GET_INTERFACE:
return ep0_get_one (device, urb, device->alternate);
case USB_REQ_SYNCH_FRAME: /* XXX should never see this (?) */
return -1;
case USB_REQ_CLEAR_FEATURE:
case USB_REQ_SET_FEATURE:
case USB_REQ_SET_ADDRESS:
case USB_REQ_SET_DESCRIPTOR:
case USB_REQ_SET_CONFIGURATION:
case USB_REQ_SET_INTERFACE:
return -1;
}
}
/* handle the requests that do not return data */
else {
/*dbg_ep0(3, "Host-to-Device"); */
switch (request->bRequest) {
case USB_REQ_CLEAR_FEATURE:
case USB_REQ_SET_FEATURE:
dbg_ep0 (0, "Host-to-Device");
switch (request->
bmRequestType & USB_REQ_RECIPIENT_MASK) {
case USB_REQ_RECIPIENT_DEVICE:
/* XXX DEVICE_REMOTE_WAKEUP or TEST_MODE would be added here */
/* XXX fall through for now as we do not support either */
case USB_REQ_RECIPIENT_INTERFACE:
case USB_REQ_RECIPIENT_OTHER:
dbg_ep0 (0, "request %s not",
USBD_DEVICE_REQUESTS (request->bRequest));
default:
return -1;
case USB_REQ_RECIPIENT_ENDPOINT:
dbg_ep0 (0, "ENDPOINT: %x", le16_to_cpu (request->wValue));
if (le16_to_cpu (request->wValue) == USB_ENDPOINT_HALT) {
/*return usbd_device_feature (device, le16_to_cpu (request->wIndex), */
/* request->bRequest == USB_REQ_SET_FEATURE); */
/* NEED TO IMPLEMENT THIS!!! */
return -1;
} else {
dbg_ep0 (1, "request %s bad wValue: %04x",
USBD_DEVICE_REQUESTS
(request->bRequest),
le16_to_cpu (request->wValue));
return -1;
}
}
case USB_REQ_SET_ADDRESS:
/* check if this is a re-address, reset first if it is (this shouldn't be possible) */
if (device->device_state != STATE_DEFAULT) {
dbg_ep0 (1, "set_address: %02x state: %s",
le16_to_cpu (request->wValue),
usbd_device_states[device->device_state]);
return -1;
}
address = le16_to_cpu (request->wValue);
if ((address & 0x7f) != address) {
dbg_ep0 (1, "invalid address %04x %04x",
address, address & 0x7f);
return -1;
}
device->address = address;
/*dbg_ep0(2, "address: %d %d %d", */
/* request->wValue, le16_to_cpu(request->wValue), device->address); */
return 0;
case USB_REQ_SET_DESCRIPTOR: /* XXX should we support this? */
dbg_ep0 (0, "set descriptor: NOT SUPPORTED");
return -1;
case USB_REQ_SET_CONFIGURATION:
/* c.f. 9.4.7 - the top half of wValue is reserved */
device->configuration = le16_to_cpu(request->wValue) & 0xff;
/* reset interface and alternate settings */
device->interface = device->alternate = 0;
/*dbg_ep0(2, "set configuration: %d", device->configuration); */
/*dbg_ep0(2, "DEVICE_CONFIGURED.. event?\n"); */
return 0;
case USB_REQ_SET_INTERFACE:
device->interface = le16_to_cpu (request->wIndex);
device->alternate = le16_to_cpu (request->wValue);
/*dbg_ep0(2, "set interface: %d alternate: %d", device->interface, device->alternate); */
dbg_ep0(2, "DEVICE_SET_INTERFACE.. event?\n");
return 0;
case USB_REQ_GET_STATUS:
case USB_REQ_GET_DESCRIPTOR:
case USB_REQ_GET_CONFIGURATION:
case USB_REQ_GET_INTERFACE:
case USB_REQ_SYNCH_FRAME: /* XXX should never see this (?) */
return -1;
}
}
return -1;
}