board/udoo/udoo_spl.c - filogic/uboot - Gitiles

 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2015 Udoo
  * Author: Tungyi Lin <tungyilin1127@gmail.com>
  *         Richard Hu <hakahu@gmail.com>
  * Based on board/wandboard/spl.c
  */

 #include <init.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/iomux.h>
 #include <asm/arch/mx6-pins.h>
 #include <linux/delay.h>
 #include <linux/errno.h>
 #include <asm/gpio.h>
 #include <asm/mach-imx/iomux-v3.h>
 #include <asm/mach-imx/video.h>
 #include <mmc.h>
 #include <fsl_esdhc_imx.h>
 #include <asm/arch/crm_regs.h>
 #include <asm/io.h>
 #include <asm/arch/sys_proto.h>
 #include <spl.h>

 #if defined(CONFIG_SPL_BUILD)
 #include <asm/arch/mx6-ddr.h>

 /*
  * Driving strength:
  *   0x30 == 40 Ohm
  *   0x28 == 48 Ohm
  */
 #define IMX6DQ_DRIVE_STRENGTH		0x30
 #define IMX6SDL_DRIVE_STRENGTH	0x28

 /* configure MX6Q/DUAL mmdc DDR io registers */
 static struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = {
 	.dram_sdclk_0 = IMX6DQ_DRIVE_STRENGTH,
 	.dram_sdclk_1 = IMX6DQ_DRIVE_STRENGTH,
 	.dram_cas = IMX6DQ_DRIVE_STRENGTH,
 	.dram_ras = IMX6DQ_DRIVE_STRENGTH,
 	.dram_reset = IMX6DQ_DRIVE_STRENGTH,
 	.dram_sdcke0 = IMX6DQ_DRIVE_STRENGTH,
 	.dram_sdcke1 = IMX6DQ_DRIVE_STRENGTH,
 	.dram_sdba2 = 0x00000000,
 	.dram_sdodt0 = IMX6DQ_DRIVE_STRENGTH,
 	.dram_sdodt1 = IMX6DQ_DRIVE_STRENGTH,
 	.dram_sdqs0 = IMX6DQ_DRIVE_STRENGTH,
 	.dram_sdqs1 = IMX6DQ_DRIVE_STRENGTH,
 	.dram_sdqs2 = IMX6DQ_DRIVE_STRENGTH,
 	.dram_sdqs3 = IMX6DQ_DRIVE_STRENGTH,
 	.dram_sdqs4 = IMX6DQ_DRIVE_STRENGTH,
 	.dram_sdqs5 = IMX6DQ_DRIVE_STRENGTH,
 	.dram_sdqs6 = IMX6DQ_DRIVE_STRENGTH,
 	.dram_sdqs7 = IMX6DQ_DRIVE_STRENGTH,
 	.dram_dqm0 = IMX6DQ_DRIVE_STRENGTH,
 	.dram_dqm1 = IMX6DQ_DRIVE_STRENGTH,
 	.dram_dqm2 = IMX6DQ_DRIVE_STRENGTH,
 	.dram_dqm3 = IMX6DQ_DRIVE_STRENGTH,
 	.dram_dqm4 = IMX6DQ_DRIVE_STRENGTH,
 	.dram_dqm5 = IMX6DQ_DRIVE_STRENGTH,
 	.dram_dqm6 = IMX6DQ_DRIVE_STRENGTH,
 	.dram_dqm7 = IMX6DQ_DRIVE_STRENGTH,
 };

 /* configure MX6Q/DUAL mmdc GRP io registers */
 static struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = {
 	.grp_ddr_type = 0x000c0000,
 	.grp_ddrmode_ctl = 0x00020000,
 	.grp_ddrpke = 0x00000000,
 	.grp_addds = IMX6DQ_DRIVE_STRENGTH,
 	.grp_ctlds = IMX6DQ_DRIVE_STRENGTH,
 	.grp_ddrmode = 0x00020000,
 	.grp_b0ds = IMX6DQ_DRIVE_STRENGTH,
 	.grp_b1ds = IMX6DQ_DRIVE_STRENGTH,
 	.grp_b2ds = IMX6DQ_DRIVE_STRENGTH,
 	.grp_b3ds = IMX6DQ_DRIVE_STRENGTH,
 	.grp_b4ds = IMX6DQ_DRIVE_STRENGTH,
 	.grp_b5ds = IMX6DQ_DRIVE_STRENGTH,
 	.grp_b6ds = IMX6DQ_DRIVE_STRENGTH,
 	.grp_b7ds = IMX6DQ_DRIVE_STRENGTH,
 };

 /* configure MX6SOLO/DUALLITE mmdc DDR io registers */
 struct mx6sdl_iomux_ddr_regs mx6sdl_ddr_ioregs = {
 	.dram_sdclk_0 = IMX6SDL_DRIVE_STRENGTH,
 	.dram_sdclk_1 = IMX6SDL_DRIVE_STRENGTH,
 	.dram_cas = IMX6SDL_DRIVE_STRENGTH,
 	.dram_ras = IMX6SDL_DRIVE_STRENGTH,
 	.dram_reset = IMX6SDL_DRIVE_STRENGTH,
 	.dram_sdcke0 = IMX6SDL_DRIVE_STRENGTH,
 	.dram_sdcke1 = IMX6SDL_DRIVE_STRENGTH,
 	.dram_sdba2 = 0x00000000,
 	.dram_sdodt0 = IMX6SDL_DRIVE_STRENGTH,
 	.dram_sdodt1 = IMX6SDL_DRIVE_STRENGTH,
 	.dram_sdqs0 = IMX6SDL_DRIVE_STRENGTH,
 	.dram_sdqs1 = IMX6SDL_DRIVE_STRENGTH,
 	.dram_sdqs2 = IMX6SDL_DRIVE_STRENGTH,
 	.dram_sdqs3 = IMX6SDL_DRIVE_STRENGTH,
 	.dram_sdqs4 = IMX6SDL_DRIVE_STRENGTH,
 	.dram_sdqs5 = IMX6SDL_DRIVE_STRENGTH,
 	.dram_sdqs6 = IMX6SDL_DRIVE_STRENGTH,
 	.dram_sdqs7 = IMX6SDL_DRIVE_STRENGTH,
 	.dram_dqm0 = IMX6SDL_DRIVE_STRENGTH,
 	.dram_dqm1 = IMX6SDL_DRIVE_STRENGTH,
 	.dram_dqm2 = IMX6SDL_DRIVE_STRENGTH,
 	.dram_dqm3 = IMX6SDL_DRIVE_STRENGTH,
 	.dram_dqm4 = IMX6SDL_DRIVE_STRENGTH,
 	.dram_dqm5 = IMX6SDL_DRIVE_STRENGTH,
 	.dram_dqm6 = IMX6SDL_DRIVE_STRENGTH,
 	.dram_dqm7 = IMX6SDL_DRIVE_STRENGTH,
 };

 /* configure MX6SOLO/DUALLITE mmdc GRP io registers */
 struct mx6sdl_iomux_grp_regs mx6sdl_grp_ioregs = {
 	.grp_ddr_type = 0x000c0000,
 	.grp_ddrmode_ctl = 0x00020000,
 	.grp_ddrpke = 0x00000000,
 	.grp_addds = IMX6SDL_DRIVE_STRENGTH,
 	.grp_ctlds = IMX6SDL_DRIVE_STRENGTH,
 	.grp_ddrmode = 0x00020000,
 	.grp_b0ds = IMX6SDL_DRIVE_STRENGTH,
 	.grp_b1ds = IMX6SDL_DRIVE_STRENGTH,
 	.grp_b2ds = IMX6SDL_DRIVE_STRENGTH,
 	.grp_b3ds = IMX6SDL_DRIVE_STRENGTH,
 	.grp_b4ds = IMX6SDL_DRIVE_STRENGTH,
 	.grp_b5ds = IMX6SDL_DRIVE_STRENGTH,
 	.grp_b6ds = IMX6SDL_DRIVE_STRENGTH,
 	.grp_b7ds = IMX6SDL_DRIVE_STRENGTH,
 };

 /* MT41K128M16JT-125 */
 static struct mx6_ddr3_cfg mt41k128m16jt_125 = {
 	/* quad = 1066, duallite = 800 */
 	.mem_speed = 1066,
 	.density = 2,
 	.width = 16,
 	.banks = 8,
 	.rowaddr = 14,
 	.coladdr = 10,
 	.pagesz = 2,
 	.trcd = 1375,
 	.trcmin = 4875,
 	.trasmin = 3500,
 	.SRT = 0,
 };

 static struct mx6_mmdc_calibration mx6q_1g_mmdc_calib = {
 	.p0_mpwldectrl0 = 0x00350035,
 	.p0_mpwldectrl1 = 0x001F001F,
 	.p1_mpwldectrl0 = 0x00010001,
 	.p1_mpwldectrl1 = 0x00010001,
 	.p0_mpdgctrl0 = 0x43510360,
 	.p0_mpdgctrl1 = 0x0342033F,
 	.p1_mpdgctrl0 = 0x033F033F,
 	.p1_mpdgctrl1 = 0x03290266,
 	.p0_mprddlctl = 0x4B3E4141,
 	.p1_mprddlctl = 0x47413B4A,
 	.p0_mpwrdlctl = 0x42404843,
 	.p1_mpwrdlctl = 0x4C3F4C45,
 };

 static struct mx6_mmdc_calibration mx6dl_1g_mmdc_calib = {
 	.p0_mpwldectrl0 = 0x002F0038,
 	.p0_mpwldectrl1 = 0x001F001F,
 	.p1_mpwldectrl0 = 0x001F001F,
 	.p1_mpwldectrl1 = 0x001F001F,
 	.p0_mpdgctrl0 = 0x425C0251,
 	.p0_mpdgctrl1 = 0x021B021E,
 	.p1_mpdgctrl0 = 0x021B021E,
 	.p1_mpdgctrl1 = 0x01730200,
 	.p0_mprddlctl = 0x45474C45,
 	.p1_mprddlctl = 0x44464744,
 	.p0_mpwrdlctl = 0x3F3F3336,
 	.p1_mpwrdlctl = 0x32383630,
 };

 /* DDR 64bit 1GB */
 static struct mx6_ddr_sysinfo mem_qdl = {
 	.dsize = 2,
 	.cs1_mirror = 0,
 	/* config for full 4GB range so that get_mem_size() works */
 	.cs_density = 32,
 	.ncs = 1,
 	.bi_on = 1,
 	/* quad = 2, duallite = 1 */
 	.rtt_nom = 2,
 	/* quad = 2, duallite = 1 */
 	.rtt_wr = 2,
 	.ralat = 5,
 	.walat = 0,
 	.mif3_mode = 3,
 	.rst_to_cke = 0x23,
 	.sde_to_rst = 0x10,
 	.refsel = 1,	/* Refresh cycles at 32KHz */
 	.refr = 7,	/* 8 refresh commands per refresh cycle */
 };

 static void ccgr_init(void)
 {
 	struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;

 	/* set the default clock gate to save power */
 	writel(0x00C03F3F, &ccm->CCGR0);
 	writel(0x0030FC03, &ccm->CCGR1);
 	writel(0x0FFFC000, &ccm->CCGR2);
 	writel(0x3FF00000, &ccm->CCGR3);
 	writel(0x00FFF300, &ccm->CCGR4);
 	writel(0x0F0000C3, &ccm->CCGR5);
 	writel(0x000003FF, &ccm->CCGR6);
 }

 static void spl_dram_init(void)
 {
 	if (is_cpu_type(MXC_CPU_MX6DL)) {
 		mt41k128m16jt_125.mem_speed = 800;
 		mem_qdl.rtt_nom = 1;
 		mem_qdl.rtt_wr = 1;

 		mx6sdl_dram_iocfg(64, &mx6sdl_ddr_ioregs, &mx6sdl_grp_ioregs);
 		mx6_dram_cfg(&mem_qdl, &mx6dl_1g_mmdc_calib, &mt41k128m16jt_125);
 	} else if (is_cpu_type(MXC_CPU_MX6Q)) {
 		mt41k128m16jt_125.mem_speed = 1066;
 		mem_qdl.rtt_nom = 2;
 		mem_qdl.rtt_wr = 2;

 		mx6dq_dram_iocfg(64, &mx6dq_ddr_ioregs, &mx6dq_grp_ioregs);
 		mx6_dram_cfg(&mem_qdl, &mx6q_1g_mmdc_calib, &mt41k128m16jt_125);
 	}

 	udelay(100);
 }

 void board_init_f(ulong dummy)
 {
 	ccgr_init();

 	/* setup AIPS and disable watchdog */
 	arch_cpu_init();

 	gpr_init();

 	/* iomux */
 	board_early_init_f();

 	/* setup GP timer */
 	timer_init();

 	/* UART clocks enabled and gd valid - init serial console */
 	preloader_console_init();

 	/* DDR initialization */
 	spl_dram_init();
 }

 #define USDHC3_CD_GPIO		IMX_GPIO_NR(7, 0)

 #define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP |			\
 	PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm |		\
 	PAD_CTL_SRE_FAST  | PAD_CTL_HYS)

 static struct fsl_esdhc_cfg usdhc_cfg[2] = {
 	{USDHC3_BASE_ADDR},
 };

 static const iomux_v3_cfg_t usdhc3_pads[] = {
 	IOMUX_PADS(PAD_SD3_CLK__SD3_CLK    | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 	IOMUX_PADS(PAD_SD3_CMD__SD3_CMD    | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 	IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 	IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 	IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 	IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 	IOMUX_PADS(PAD_SD3_DAT5__GPIO7_IO00  | MUX_PAD_CTRL(NO_PAD_CTRL)),
 };

 int board_mmc_getcd(struct mmc *mmc)
 {
 	return !gpio_get_value(USDHC3_CD_GPIO);
 }

 int board_mmc_init(struct bd_info *bis)
 {
 	SETUP_IOMUX_PADS(usdhc3_pads);
 	usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
 	usdhc_cfg[0].max_bus_width = 4;
 	gpio_direction_input(USDHC3_CD_GPIO);

 	return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
 }
 #endif
	// SPDX-License-Identifier: GPL-2.0+
	/*
	* Copyright (C) 2015 Udoo
	* Author: Tungyi Lin <tungyilin1127@gmail.com>
	* Richard Hu <hakahu@gmail.com>
	* Based on board/wandboard/spl.c
	*/

	#include <init.h>
	#include <asm/arch/clock.h>
	#include <asm/arch/imx-regs.h>
	#include <asm/arch/iomux.h>
	#include <asm/arch/mx6-pins.h>
	#include <linux/delay.h>
	#include <linux/errno.h>
	#include <asm/gpio.h>
	#include <asm/mach-imx/iomux-v3.h>
	#include <asm/mach-imx/video.h>
	#include <mmc.h>
	#include <fsl_esdhc_imx.h>
	#include <asm/arch/crm_regs.h>
	#include <asm/io.h>
	#include <asm/arch/sys_proto.h>
	#include <spl.h>

	#if defined(CONFIG_SPL_BUILD)
	#include <asm/arch/mx6-ddr.h>

	/*
	* Driving strength:
	* 0x30 == 40 Ohm
	* 0x28 == 48 Ohm
	*/
	#define IMX6DQ_DRIVE_STRENGTH 0x30
	#define IMX6SDL_DRIVE_STRENGTH 0x28

	/* configure MX6Q/DUAL mmdc DDR io registers */
	static struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = {
	.dram_sdclk_0 = IMX6DQ_DRIVE_STRENGTH,
	.dram_sdclk_1 = IMX6DQ_DRIVE_STRENGTH,
	.dram_cas = IMX6DQ_DRIVE_STRENGTH,
	.dram_ras = IMX6DQ_DRIVE_STRENGTH,
	.dram_reset = IMX6DQ_DRIVE_STRENGTH,
	.dram_sdcke0 = IMX6DQ_DRIVE_STRENGTH,
	.dram_sdcke1 = IMX6DQ_DRIVE_STRENGTH,
	.dram_sdba2 = 0x00000000,
	.dram_sdodt0 = IMX6DQ_DRIVE_STRENGTH,
	.dram_sdodt1 = IMX6DQ_DRIVE_STRENGTH,
	.dram_sdqs0 = IMX6DQ_DRIVE_STRENGTH,
	.dram_sdqs1 = IMX6DQ_DRIVE_STRENGTH,
	.dram_sdqs2 = IMX6DQ_DRIVE_STRENGTH,
	.dram_sdqs3 = IMX6DQ_DRIVE_STRENGTH,
	.dram_sdqs4 = IMX6DQ_DRIVE_STRENGTH,
	.dram_sdqs5 = IMX6DQ_DRIVE_STRENGTH,
	.dram_sdqs6 = IMX6DQ_DRIVE_STRENGTH,
	.dram_sdqs7 = IMX6DQ_DRIVE_STRENGTH,
	.dram_dqm0 = IMX6DQ_DRIVE_STRENGTH,
	.dram_dqm1 = IMX6DQ_DRIVE_STRENGTH,
	.dram_dqm2 = IMX6DQ_DRIVE_STRENGTH,
	.dram_dqm3 = IMX6DQ_DRIVE_STRENGTH,
	.dram_dqm4 = IMX6DQ_DRIVE_STRENGTH,
	.dram_dqm5 = IMX6DQ_DRIVE_STRENGTH,
	.dram_dqm6 = IMX6DQ_DRIVE_STRENGTH,
	.dram_dqm7 = IMX6DQ_DRIVE_STRENGTH,
	};

	/* configure MX6Q/DUAL mmdc GRP io registers */
	static struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = {
	.grp_ddr_type = 0x000c0000,
	.grp_ddrmode_ctl = 0x00020000,
	.grp_ddrpke = 0x00000000,
	.grp_addds = IMX6DQ_DRIVE_STRENGTH,
	.grp_ctlds = IMX6DQ_DRIVE_STRENGTH,
	.grp_ddrmode = 0x00020000,
	.grp_b0ds = IMX6DQ_DRIVE_STRENGTH,
	.grp_b1ds = IMX6DQ_DRIVE_STRENGTH,
	.grp_b2ds = IMX6DQ_DRIVE_STRENGTH,
	.grp_b3ds = IMX6DQ_DRIVE_STRENGTH,
	.grp_b4ds = IMX6DQ_DRIVE_STRENGTH,
	.grp_b5ds = IMX6DQ_DRIVE_STRENGTH,
	.grp_b6ds = IMX6DQ_DRIVE_STRENGTH,
	.grp_b7ds = IMX6DQ_DRIVE_STRENGTH,
	};

	/* configure MX6SOLO/DUALLITE mmdc DDR io registers */
	struct mx6sdl_iomux_ddr_regs mx6sdl_ddr_ioregs = {
	.dram_sdclk_0 = IMX6SDL_DRIVE_STRENGTH,
	.dram_sdclk_1 = IMX6SDL_DRIVE_STRENGTH,
	.dram_cas = IMX6SDL_DRIVE_STRENGTH,
	.dram_ras = IMX6SDL_DRIVE_STRENGTH,
	.dram_reset = IMX6SDL_DRIVE_STRENGTH,
	.dram_sdcke0 = IMX6SDL_DRIVE_STRENGTH,
	.dram_sdcke1 = IMX6SDL_DRIVE_STRENGTH,
	.dram_sdba2 = 0x00000000,
	.dram_sdodt0 = IMX6SDL_DRIVE_STRENGTH,
	.dram_sdodt1 = IMX6SDL_DRIVE_STRENGTH,
	.dram_sdqs0 = IMX6SDL_DRIVE_STRENGTH,
	.dram_sdqs1 = IMX6SDL_DRIVE_STRENGTH,
	.dram_sdqs2 = IMX6SDL_DRIVE_STRENGTH,
	.dram_sdqs3 = IMX6SDL_DRIVE_STRENGTH,
	.dram_sdqs4 = IMX6SDL_DRIVE_STRENGTH,
	.dram_sdqs5 = IMX6SDL_DRIVE_STRENGTH,
	.dram_sdqs6 = IMX6SDL_DRIVE_STRENGTH,
	.dram_sdqs7 = IMX6SDL_DRIVE_STRENGTH,
	.dram_dqm0 = IMX6SDL_DRIVE_STRENGTH,
	.dram_dqm1 = IMX6SDL_DRIVE_STRENGTH,
	.dram_dqm2 = IMX6SDL_DRIVE_STRENGTH,
	.dram_dqm3 = IMX6SDL_DRIVE_STRENGTH,
	.dram_dqm4 = IMX6SDL_DRIVE_STRENGTH,
	.dram_dqm5 = IMX6SDL_DRIVE_STRENGTH,
	.dram_dqm6 = IMX6SDL_DRIVE_STRENGTH,
	.dram_dqm7 = IMX6SDL_DRIVE_STRENGTH,
	};

	/* configure MX6SOLO/DUALLITE mmdc GRP io registers */
	struct mx6sdl_iomux_grp_regs mx6sdl_grp_ioregs = {
	.grp_ddr_type = 0x000c0000,
	.grp_ddrmode_ctl = 0x00020000,
	.grp_ddrpke = 0x00000000,
	.grp_addds = IMX6SDL_DRIVE_STRENGTH,
	.grp_ctlds = IMX6SDL_DRIVE_STRENGTH,
	.grp_ddrmode = 0x00020000,
	.grp_b0ds = IMX6SDL_DRIVE_STRENGTH,
	.grp_b1ds = IMX6SDL_DRIVE_STRENGTH,
	.grp_b2ds = IMX6SDL_DRIVE_STRENGTH,
	.grp_b3ds = IMX6SDL_DRIVE_STRENGTH,
	.grp_b4ds = IMX6SDL_DRIVE_STRENGTH,
	.grp_b5ds = IMX6SDL_DRIVE_STRENGTH,
	.grp_b6ds = IMX6SDL_DRIVE_STRENGTH,
	.grp_b7ds = IMX6SDL_DRIVE_STRENGTH,
	};

	/* MT41K128M16JT-125 */
	static struct mx6_ddr3_cfg mt41k128m16jt_125 = {
	/* quad = 1066, duallite = 800 */
	.mem_speed = 1066,
	.density = 2,
	.width = 16,
	.banks = 8,
	.rowaddr = 14,
	.coladdr = 10,
	.pagesz = 2,
	.trcd = 1375,
	.trcmin = 4875,
	.trasmin = 3500,
	.SRT = 0,
	};

	static struct mx6_mmdc_calibration mx6q_1g_mmdc_calib = {
	.p0_mpwldectrl0 = 0x00350035,
	.p0_mpwldectrl1 = 0x001F001F,
	.p1_mpwldectrl0 = 0x00010001,
	.p1_mpwldectrl1 = 0x00010001,
	.p0_mpdgctrl0 = 0x43510360,
	.p0_mpdgctrl1 = 0x0342033F,
	.p1_mpdgctrl0 = 0x033F033F,
	.p1_mpdgctrl1 = 0x03290266,
	.p0_mprddlctl = 0x4B3E4141,
	.p1_mprddlctl = 0x47413B4A,
	.p0_mpwrdlctl = 0x42404843,
	.p1_mpwrdlctl = 0x4C3F4C45,
	};

	static struct mx6_mmdc_calibration mx6dl_1g_mmdc_calib = {
	.p0_mpwldectrl0 = 0x002F0038,
	.p0_mpwldectrl1 = 0x001F001F,
	.p1_mpwldectrl0 = 0x001F001F,
	.p1_mpwldectrl1 = 0x001F001F,
	.p0_mpdgctrl0 = 0x425C0251,
	.p0_mpdgctrl1 = 0x021B021E,
	.p1_mpdgctrl0 = 0x021B021E,
	.p1_mpdgctrl1 = 0x01730200,
	.p0_mprddlctl = 0x45474C45,
	.p1_mprddlctl = 0x44464744,
	.p0_mpwrdlctl = 0x3F3F3336,
	.p1_mpwrdlctl = 0x32383630,
	};

	/* DDR 64bit 1GB */
	static struct mx6_ddr_sysinfo mem_qdl = {
	.dsize = 2,
	.cs1_mirror = 0,
	/* config for full 4GB range so that get_mem_size() works */
	.cs_density = 32,
	.ncs = 1,
	.bi_on = 1,
	/* quad = 2, duallite = 1 */
	.rtt_nom = 2,
	/* quad = 2, duallite = 1 */
	.rtt_wr = 2,
	.ralat = 5,
	.walat = 0,
	.mif3_mode = 3,
	.rst_to_cke = 0x23,
	.sde_to_rst = 0x10,
	.refsel = 1, /* Refresh cycles at 32KHz */
	.refr = 7, /* 8 refresh commands per refresh cycle */
	};

	static void ccgr_init(void)
	{
	struct mxc_ccm_reg ccm = (struct mxc_ccm_reg )CCM_BASE_ADDR;

	/* set the default clock gate to save power */
	writel(0x00C03F3F, &ccm->CCGR0);
	writel(0x0030FC03, &ccm->CCGR1);
	writel(0x0FFFC000, &ccm->CCGR2);
	writel(0x3FF00000, &ccm->CCGR3);
	writel(0x00FFF300, &ccm->CCGR4);
	writel(0x0F0000C3, &ccm->CCGR5);
	writel(0x000003FF, &ccm->CCGR6);
	}

	static void spl_dram_init(void)
	{
	if (is_cpu_type(MXC_CPU_MX6DL)) {
	mt41k128m16jt_125.mem_speed = 800;
	mem_qdl.rtt_nom = 1;
	mem_qdl.rtt_wr = 1;

	mx6sdl_dram_iocfg(64, &mx6sdl_ddr_ioregs, &mx6sdl_grp_ioregs);
	mx6_dram_cfg(&mem_qdl, &mx6dl_1g_mmdc_calib, &mt41k128m16jt_125);
	} else if (is_cpu_type(MXC_CPU_MX6Q)) {
	mt41k128m16jt_125.mem_speed = 1066;
	mem_qdl.rtt_nom = 2;
	mem_qdl.rtt_wr = 2;

	mx6dq_dram_iocfg(64, &mx6dq_ddr_ioregs, &mx6dq_grp_ioregs);
	mx6_dram_cfg(&mem_qdl, &mx6q_1g_mmdc_calib, &mt41k128m16jt_125);
	}

	udelay(100);
	}

	void board_init_f(ulong dummy)
	{
	ccgr_init();

	/* setup AIPS and disable watchdog */
	arch_cpu_init();

	gpr_init();

	/* iomux */
	board_early_init_f();

	/* setup GP timer */
	timer_init();

	/* UART clocks enabled and gd valid - init serial console */
	preloader_console_init();

	/* DDR initialization */
	spl_dram_init();
	}

	#define USDHC3_CD_GPIO IMX_GPIO_NR(7, 0)

	#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP \| \
	PAD_CTL_SPEED_LOW \| PAD_CTL_DSE_80ohm \| \
	PAD_CTL_SRE_FAST \| PAD_CTL_HYS)

	static struct fsl_esdhc_cfg usdhc_cfg[2] = {
	{USDHC3_BASE_ADDR},
	};

	static const iomux_v3_cfg_t usdhc3_pads[] = {
	IOMUX_PADS(PAD_SD3_CLK__SD3_CLK \| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
	IOMUX_PADS(PAD_SD3_CMD__SD3_CMD \| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
	IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 \| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
	IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 \| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
	IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 \| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
	IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 \| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
	IOMUX_PADS(PAD_SD3_DAT5__GPIO7_IO00 \| MUX_PAD_CTRL(NO_PAD_CTRL)),
	};

	int board_mmc_getcd(struct mmc *mmc)
	{
	return !gpio_get_value(USDHC3_CD_GPIO);
	}

	int board_mmc_init(struct bd_info *bis)
	{
	SETUP_IOMUX_PADS(usdhc3_pads);
	usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
	usdhc_cfg[0].max_bus_width = 4;
	gpio_direction_input(USDHC3_CD_GPIO);

	return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
	}
	#endif