| /*------------------------------------------------------------------------------+ |
| * |
| * This source code has been made available to you by IBM on an AS-IS |
| * basis. Anyone receiving this source is licensed under IBM |
| * copyrights to use it in any way he or she deems fit, including |
| * copying it, modifying it, compiling it, and redistributing it either |
| * with or without modifications. No license under IBM patents or |
| * patent applications is to be implied by the copyright license. |
| * |
| * Any user of this software should understand that IBM cannot provide |
| * technical support for this software and will not be responsible for |
| * any consequences resulting from the use of this software. |
| * |
| * Any person who transfers this source code or any derivative work |
| * must include the IBM copyright notice, this paragraph, and the |
| * preceding two paragraphs in the transferred software. |
| * |
| * COPYRIGHT I B M CORPORATION 1995 |
| * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M |
| *-------------------------------------------------------------------------------*/ |
| |
| /*----------------------------------------------------------------------------- |
| * Function: ext_bus_cntlr_init |
| * Description: Initializes the External Bus Controller for the external |
| * peripherals. IMPORTANT: For pass1 this code must run from |
| * cache since you can not reliably change a peripheral banks |
| * timing register (pbxap) while running code from that bank. |
| * For ex., since we are running from ROM on bank 0, we can NOT |
| * execute the code that modifies bank 0 timings from ROM, so |
| * we run it from cache. |
| * Bank 0 - Flash or Multi Purpose Socket |
| * Bank 1 - Multi Purpose Socket or Flash |
| * Bank 2 - not used |
| * Bank 3 - not used |
| * Bank 4 - not used |
| * Bank 5 - not used |
| * Bank 6 - used to switch on the 12V for the Multipurpose socket |
| * Bank 7 - Config Register |
| *-----------------------------------------------------------------------------*/ |
| #include <ppc4xx.h> |
| |
| #define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ |
| |
| #include "configs/PIP405.h" |
| #include <ppc_asm.tmpl> |
| #include <ppc_defs.h> |
| |
| #include <asm/cache.h> |
| #include <asm/mmu.h> |
| |
| |
| .globl ext_bus_cntlr_init |
| ext_bus_cntlr_init: |
| mflr r4 /* save link register */ |
| bl ..getAddr |
| ..getAddr: |
| mflr r3 /* get address of ..getAddr */ |
| mtlr r4 /* restore link register */ |
| addi r4,0,14 /* set ctr to 14; used to prefetch */ |
| mtctr r4 /* 14 cache lines to fit this function */ |
| /* in cache (gives us 8x14=112 instrctns) */ |
| ..ebcloop: |
| icbt r0,r3 /* prefetch cache line for addr in r3 */ |
| addi r3,r3,32 /* move to next cache line */ |
| bdnz ..ebcloop /* continue for 14 cache lines */ |
| |
| /*------------------------------------------------------------------- |
| * Delay to ensure all accesses to ROM are complete before changing |
| * bank 0 timings. |
| *------------------------------------------------------------------- */ |
| addis r3,0,0x0 |
| ori r3,r3,0xA000 |
| mtctr r3 |
| ..spinlp: |
| bdnz ..spinlp /* spin loop */ |
| |
| /*----------------------------------------------------------------------- |
| * decide boot up mode |
| *----------------------------------------------------------------------- */ |
| addi r4,0,pb0cr |
| mtdcr ebccfga,r4 |
| mfdcr r4,ebccfgd |
| |
| andi. r0, r4, 0x2000 /* mask out irrelevant bits */ |
| beq 0f /* jump if 8 bit bus width */ |
| |
| /* setup 16 bit things |
| *----------------------------------------------------------------------- |
| * Memory Bank 0 (16 Bit Flash) initialization |
| *---------------------------------------------------------------------- */ |
| |
| addi r4,0,pb0ap |
| mtdcr ebccfga,r4 |
| addis r4,0,0x9B01 |
| ori r4,r4,0x5480 |
| mtdcr ebccfgd,r4 |
| |
| addi r4,0,pb0cr |
| mtdcr ebccfga,r4 |
| /* BS=0x011(8MB),BU=0x3(R/W), */ |
| addis r4,0,((FLASH_BASE0_PRELIM & 0xFFF00000) | 0x00050000)@h |
| ori r4,r4,0xA000 /* BW=0x01(16 bits) */ |
| mtdcr ebccfgd,r4 |
| |
| /*----------------------------------------------------------------------- |
| * Memory Bank 1 (Multi Purpose Socket) initialization |
| *----------------------------------------------------------------------*/ |
| addi r4,0,pb1ap |
| mtdcr ebccfga,r4 |
| addis r4,0,0x0281 |
| ori r4,r4,0x5480 |
| mtdcr ebccfgd,r4 |
| |
| addi r4,0,pb1cr |
| mtdcr ebccfga,r4 |
| /* BS=0x011(8MB),BU=0x3(R/W), */ |
| addis r4,0,((MULTI_PURPOSE_SOCKET_ADDR & 0xFFF00000) | 0x00050000)@h |
| ori r4,r4,0x8000 /* BW=0x0( 8 bits) */ |
| mtdcr ebccfgd,r4 |
| b 1f |
| |
| 0: |
| /* 8Bit boot mode: */ |
| /*----------------------------------------------------------------------- |
| * Memory Bank 0 Multi Purpose Socket initialization |
| *----------------------------------------------------------------------- */ |
| |
| addi r4,0,pb0ap |
| mtdcr ebccfga,r4 |
| addis r4,0,0x9B01 |
| ori r4,r4,0x5480 |
| mtdcr ebccfgd,r4 |
| |
| addi r4,0,pb0cr |
| mtdcr ebccfga,r4 |
| /* BS=0x011(4MB),BU=0x3(R/W), */ |
| addis r4,0,((FLASH_BASE0_PRELIM & 0xFFF00000) | 0x00050000)@h |
| ori r4,r4,0x8000 /* BW=0x0( 8 bits) */ |
| mtdcr ebccfgd,r4 |
| |
| /*----------------------------------------------------------------------- |
| * Memory Bank 1 (Flash) initialization |
| *-----------------------------------------------------------------------*/ |
| addi r4,0,pb1ap |
| mtdcr ebccfga,r4 |
| addis r4,0,0x0281 |
| ori r4,r4,0x5480 |
| mtdcr ebccfgd,r4 |
| |
| addi r4,0,pb1cr |
| mtdcr ebccfga,r4 |
| /* BS=0x011(8MB),BU=0x3(R/W), */ |
| addis r4,0,((MULTI_PURPOSE_SOCKET_ADDR & 0xFFF00000) | 0x00050000)@h |
| ori r4,r4,0xA000 /* BW=0x0( 8 bits) */ |
| mtdcr ebccfgd,r4 |
| |
| 1: |
| /*----------------------------------------------------------------------- |
| * Memory Bank 2-3-4-5-6 (not used) initialization |
| *-----------------------------------------------------------------------*/ |
| addi r4,0,pb2cr |
| mtdcr ebccfga,r4 |
| addis r4,0,0x0000 |
| ori r4,r4,0x0000 |
| mtdcr ebccfgd,r4 |
| |
| addi r4,0,pb3cr |
| mtdcr ebccfga,r4 |
| addis r4,0,0x0000 |
| ori r4,r4,0x0000 |
| mtdcr ebccfgd,r4 |
| |
| addi r4,0,pb4cr |
| mtdcr ebccfga,r4 |
| addis r4,0,0x0000 |
| ori r4,r4,0x0000 |
| mtdcr ebccfgd,r4 |
| |
| addi r4,0,pb5cr |
| mtdcr ebccfga,r4 |
| addis r4,0,0x0000 |
| ori r4,r4,0x0000 |
| mtdcr ebccfgd,r4 |
| |
| addi r4,0,pb6cr |
| mtdcr ebccfga,r4 |
| addis r4,0,0x0000 |
| ori r4,r4,0x0000 |
| mtdcr ebccfgd,r4 |
| |
| /*----------------------------------------------------------------------- |
| * Memory Bank 7 (Config Register) initialization |
| *----------------------------------------------------------------------- */ |
| addi r4,0,pb7ap |
| mtdcr ebccfga,r4 |
| addis r4,0,0x0181 /* Doc says TWT=3 and Openios TWT=3!! */ |
| ori r4,r4,0x5280 /* disable Ready, BEM=0 */ |
| mtdcr ebccfgd,r4 |
| |
| addi r4,0,pb7cr |
| mtdcr ebccfga,r4 |
| /* BS=0x0(1MB),BU=0x3(R/W), */ |
| addis r4,0,((CONFIG_PORT_ADDR & 0xFFF00000) | 0x00010000)@h |
| ori r4,r4,0x8000 /* BW=0x0(8 bits) */ |
| mtdcr ebccfgd,r4 |
| nop /* pass2 DCR errata #8 */ |
| blr |
| |
| /*----------------------------------------------------------------------------- |
| * Function: sdram_init |
| * Description: Configures the internal SRAM memory. and setup the |
| * Stackpointer in it. |
| *----------------------------------------------------------------------------- */ |
| .globl sdram_init |
| |
| sdram_init: |
| |
| |
| blr |