| /* |
| * Copyright 2010-2011 Freescale Semiconductor, Inc. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| /* |
| * P010 RDB board configuration file |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| #ifdef CONFIG_36BIT |
| #define CONFIG_PHYS_64BIT |
| #endif |
| #define CONFIG_DISPLAY_BOARDINFO |
| |
| #define CONFIG_P1010 |
| #define CONFIG_E500 /* BOOKE e500 family */ |
| #include <asm/config_mpc85xx.h> |
| #define CONFIG_NAND_FSL_IFC |
| |
| #ifdef CONFIG_SDCARD |
| #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT |
| #define CONFIG_SPL_DRIVERS_MISC_SUPPORT |
| #define CONFIG_SPL_ENV_SUPPORT |
| #define CONFIG_SPL_SERIAL_SUPPORT |
| #define CONFIG_SPL_MMC_SUPPORT |
| #define CONFIG_SPL_MMC_MINIMAL |
| #define CONFIG_SPL_FLUSH_IMAGE |
| #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" |
| #define CONFIG_SPL_LIBGENERIC_SUPPORT |
| #define CONFIG_SPL_LIBCOMMON_SUPPORT |
| #define CONFIG_SPL_I2C_SUPPORT |
| #define CONFIG_FSL_LAW /* Use common FSL init code */ |
| #define CONFIG_SYS_TEXT_BASE 0x11001000 |
| #define CONFIG_SPL_TEXT_BASE 0xD0001000 |
| #define CONFIG_SPL_PAD_TO 0x18000 |
| #define CONFIG_SPL_MAX_SIZE (96 * 1024) |
| #define CONFIG_SYS_MMC_U_BOOT_SIZE (512 << 10) |
| #define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000) |
| #define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) |
| #define CONFIG_SYS_MMC_U_BOOT_OFFS (96 << 10) |
| #define CONFIG_SYS_MPC85XX_NO_RESETVEC |
| #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" |
| #define CONFIG_SPL_MMC_BOOT |
| #ifdef CONFIG_SPL_BUILD |
| #define CONFIG_SPL_COMMON_INIT_DDR |
| #endif |
| #endif |
| |
| #ifdef CONFIG_SPIFLASH |
| #ifdef CONFIG_SECURE_BOOT |
| #define CONFIG_RAMBOOT_SPIFLASH |
| #define CONFIG_SYS_TEXT_BASE 0x11000000 |
| #define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc |
| #else |
| #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT |
| #define CONFIG_SPL_DRIVERS_MISC_SUPPORT |
| #define CONFIG_SPL_ENV_SUPPORT |
| #define CONFIG_SPL_SERIAL_SUPPORT |
| #define CONFIG_SPL_SPI_SUPPORT |
| #define CONFIG_SPL_SPI_FLASH_SUPPORT |
| #define CONFIG_SPL_SPI_FLASH_MINIMAL |
| #define CONFIG_SPL_FLUSH_IMAGE |
| #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" |
| #define CONFIG_SPL_LIBGENERIC_SUPPORT |
| #define CONFIG_SPL_LIBCOMMON_SUPPORT |
| #define CONFIG_SPL_I2C_SUPPORT |
| #define CONFIG_FSL_LAW /* Use common FSL init code */ |
| #define CONFIG_SYS_TEXT_BASE 0x11001000 |
| #define CONFIG_SPL_TEXT_BASE 0xD0001000 |
| #define CONFIG_SPL_PAD_TO 0x18000 |
| #define CONFIG_SPL_MAX_SIZE (96 * 1024) |
| #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (512 << 10) |
| #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) |
| #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) |
| #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (96 << 10) |
| #define CONFIG_SYS_MPC85XX_NO_RESETVEC |
| #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" |
| #define CONFIG_SPL_SPI_BOOT |
| #ifdef CONFIG_SPL_BUILD |
| #define CONFIG_SPL_COMMON_INIT_DDR |
| #endif |
| #endif |
| #endif |
| |
| #ifdef CONFIG_NAND |
| #ifdef CONFIG_SECURE_BOOT |
| #define CONFIG_SPL_INIT_MINIMAL |
| #define CONFIG_SPL_SERIAL_SUPPORT |
| #define CONFIG_SPL_NAND_SUPPORT |
| #define CONFIG_SPL_NAND_BOOT |
| #define CONFIG_SPL_FLUSH_IMAGE |
| #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" |
| |
| #define CONFIG_SYS_TEXT_BASE 0x00201000 |
| #define CONFIG_SPL_TEXT_BASE 0xFFFFE000 |
| #define CONFIG_SPL_MAX_SIZE 8192 |
| #define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000 |
| #define CONFIG_SPL_RELOC_STACK 0x00100000 |
| #define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000) |
| #define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE) |
| #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 |
| #define CONFIG_SYS_NAND_U_BOOT_OFFS 0 |
| #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" |
| #else |
| #ifdef CONFIG_TPL_BUILD |
| #define CONFIG_SPL_NAND_BOOT |
| #define CONFIG_SPL_FLUSH_IMAGE |
| #define CONFIG_SPL_ENV_SUPPORT |
| #define CONFIG_SPL_NAND_INIT |
| #define CONFIG_SPL_SERIAL_SUPPORT |
| #define CONFIG_SPL_LIBGENERIC_SUPPORT |
| #define CONFIG_SPL_LIBCOMMON_SUPPORT |
| #define CONFIG_SPL_I2C_SUPPORT |
| #define CONFIG_SPL_NAND_SUPPORT |
| #define CONFIG_SPL_DRIVERS_MISC_SUPPORT |
| #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT |
| #define CONFIG_SPL_COMMON_INIT_DDR |
| #define CONFIG_SPL_MAX_SIZE (128 << 10) |
| #define CONFIG_SPL_TEXT_BASE 0xD0001000 |
| #define CONFIG_SYS_MPC85XX_NO_RESETVEC |
| #define CONFIG_SYS_NAND_U_BOOT_SIZE (576 << 10) |
| #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) |
| #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) |
| #define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) |
| #elif defined(CONFIG_SPL_BUILD) |
| #define CONFIG_SPL_INIT_MINIMAL |
| #define CONFIG_SPL_SERIAL_SUPPORT |
| #define CONFIG_SPL_NAND_SUPPORT |
| #define CONFIG_SPL_NAND_MINIMAL |
| #define CONFIG_SPL_FLUSH_IMAGE |
| #define CONFIG_SPL_TEXT_BASE 0xff800000 |
| #define CONFIG_SPL_MAX_SIZE 8192 |
| #define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) |
| #define CONFIG_SYS_NAND_U_BOOT_DST 0xD0000000 |
| #define CONFIG_SYS_NAND_U_BOOT_START 0xD0000000 |
| #define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) |
| #endif |
| #define CONFIG_SPL_PAD_TO 0x20000 |
| #define CONFIG_TPL_PAD_TO 0x20000 |
| #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" |
| #define CONFIG_SYS_TEXT_BASE 0x11001000 |
| #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" |
| #endif |
| #endif |
| |
| #ifdef CONFIG_NAND_SECBOOT /* NAND Boot */ |
| #define CONFIG_RAMBOOT_NAND |
| #define CONFIG_SYS_TEXT_BASE 0x11000000 |
| #define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc |
| #endif |
| |
| #ifndef CONFIG_SYS_TEXT_BASE |
| #define CONFIG_SYS_TEXT_BASE 0xeff40000 |
| #endif |
| |
| #ifndef CONFIG_RESET_VECTOR_ADDRESS |
| #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc |
| #endif |
| |
| #ifdef CONFIG_SPL_BUILD |
| #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE |
| #else |
| #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ |
| #endif |
| |
| /* High Level Configuration Options */ |
| #define CONFIG_BOOKE /* BOOKE */ |
| #define CONFIG_E500 /* BOOKE e500 family */ |
| #define CONFIG_FSL_IFC /* Enable IFC Support */ |
| #define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ |
| #define CONFIG_SYS_HAS_SERDES /* common SERDES init code */ |
| |
| #define CONFIG_PCI /* Enable PCI/PCIE */ |
| #if defined(CONFIG_PCI) |
| #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ |
| #define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */ |
| #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ |
| #define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ |
| #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ |
| #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ |
| |
| #define CONFIG_CMD_PCI |
| |
| /* |
| * PCI Windows |
| * Memory space is mapped 1-1, but I/O space must start from 0. |
| */ |
| /* controller 1, Slot 1, tgtid 1, Base address a000 */ |
| #define CONFIG_SYS_PCIE1_NAME "mini PCIe Slot" |
| #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 |
| #ifdef CONFIG_PHYS_64BIT |
| #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 |
| #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull |
| #else |
| #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 |
| #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 |
| #endif |
| #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ |
| #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 |
| #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 |
| #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ |
| #ifdef CONFIG_PHYS_64BIT |
| #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull |
| #else |
| #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000 |
| #endif |
| |
| /* controller 2, Slot 2, tgtid 2, Base address 9000 */ |
| #if defined(CONFIG_P1010RDB_PA) |
| #define CONFIG_SYS_PCIE2_NAME "PCIe Slot" |
| #elif defined(CONFIG_P1010RDB_PB) |
| #define CONFIG_SYS_PCIE2_NAME "mini PCIe Slot" |
| #endif |
| #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 |
| #ifdef CONFIG_PHYS_64BIT |
| #define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000 |
| #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull |
| #else |
| #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 |
| #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 |
| #endif |
| #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ |
| #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 |
| #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 |
| #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ |
| #ifdef CONFIG_PHYS_64BIT |
| #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull |
| #else |
| #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 |
| #endif |
| |
| #define CONFIG_PCI_PNP /* do pci plug-and-play */ |
| |
| #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ |
| #define CONFIG_DOS_PARTITION |
| #endif |
| |
| #define CONFIG_FSL_LAW /* Use common FSL init code */ |
| #define CONFIG_TSEC_ENET |
| #define CONFIG_ENV_OVERWRITE |
| |
| #define CONFIG_DDR_CLK_FREQ 66666666 /* DDRCLK on P1010 RDB */ |
| #define CONFIG_SYS_CLK_FREQ 66666666 /* SYSCLK for P1010 RDB */ |
| |
| #define CONFIG_MISC_INIT_R |
| #define CONFIG_HWCONFIG |
| /* |
| * These can be toggled for performance analysis, otherwise use default. |
| */ |
| #define CONFIG_L2_CACHE /* toggle L2 cache */ |
| #define CONFIG_BTB /* toggle branch predition */ |
| |
| #define CONFIG_ADDR_STREAMING /* toggle addr streaming */ |
| |
| #define CONFIG_ENABLE_36BIT_PHYS |
| |
| #ifdef CONFIG_PHYS_64BIT |
| #define CONFIG_ADDR_MAP 1 |
| #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ |
| #endif |
| |
| #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ |
| #define CONFIG_SYS_MEMTEST_END 0x1fffffff |
| #define CONFIG_PANIC_HANG /* do not reset board on panic */ |
| |
| /* DDR Setup */ |
| #define CONFIG_SYS_FSL_DDR3 |
| #define CONFIG_SYS_DDR_RAW_TIMING |
| #define CONFIG_DDR_SPD |
| #define CONFIG_SYS_SPD_BUS_NUM 1 |
| #define SPD_EEPROM_ADDRESS 0x52 |
| |
| #define CONFIG_MEM_INIT_VALUE 0xDeadBeef |
| |
| #ifndef __ASSEMBLY__ |
| extern unsigned long get_sdram_size(void); |
| #endif |
| #define CONFIG_SYS_SDRAM_SIZE get_sdram_size() /* DDR size */ |
| #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 |
| #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE |
| |
| #define CONFIG_DIMM_SLOTS_PER_CTLR 1 |
| #define CONFIG_CHIP_SELECTS_PER_CTRL 1 |
| |
| /* DDR3 Controller Settings */ |
| #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f |
| #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302 |
| #define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 |
| #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef |
| #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 |
| #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 |
| #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 |
| #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 |
| #define CONFIG_SYS_DDR_SR_CNTR 0x00000000 |
| #define CONFIG_SYS_DDR_RCW_1 0x00000000 |
| #define CONFIG_SYS_DDR_RCW_2 0x00000000 |
| #define CONFIG_SYS_DDR_CONTROL 0xc70c0008 /* Type = DDR3 */ |
| #define CONFIG_SYS_DDR_CONTROL_2 0x24401000 |
| #define CONFIG_SYS_DDR_TIMING_4 0x00000001 |
| #define CONFIG_SYS_DDR_TIMING_5 0x03402400 |
| |
| #define CONFIG_SYS_DDR_TIMING_3_800 0x00030000 |
| #define CONFIG_SYS_DDR_TIMING_0_800 0x00110104 |
| #define CONFIG_SYS_DDR_TIMING_1_800 0x6f6b8644 |
| #define CONFIG_SYS_DDR_TIMING_2_800 0x0FA888CF |
| #define CONFIG_SYS_DDR_CLK_CTRL_800 0x03000000 |
| #define CONFIG_SYS_DDR_MODE_1_800 0x00441420 |
| #define CONFIG_SYS_DDR_MODE_2_800 0x00000000 |
| #define CONFIG_SYS_DDR_INTERVAL_800 0x0C300100 |
| #define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8675f608 |
| |
| /* settings for DDR3 at 667MT/s */ |
| #define CONFIG_SYS_DDR_TIMING_3_667 0x00010000 |
| #define CONFIG_SYS_DDR_TIMING_0_667 0x00110004 |
| #define CONFIG_SYS_DDR_TIMING_1_667 0x5d59e544 |
| #define CONFIG_SYS_DDR_TIMING_2_667 0x0FA890CD |
| #define CONFIG_SYS_DDR_CLK_CTRL_667 0x03000000 |
| #define CONFIG_SYS_DDR_MODE_1_667 0x00441210 |
| #define CONFIG_SYS_DDR_MODE_2_667 0x00000000 |
| #define CONFIG_SYS_DDR_INTERVAL_667 0x0a280000 |
| #define CONFIG_SYS_DDR_WRLVL_CONTROL_667 0x8675F608 |
| |
| #define CONFIG_SYS_CCSRBAR 0xffe00000 |
| #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR |
| |
| /* Don't relocate CCSRBAR while in NAND_SPL */ |
| #ifdef CONFIG_SPL_BUILD |
| #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE |
| #endif |
| |
| /* |
| * Memory map |
| * |
| * 0x0000_0000 0x3fff_ffff DDR 1G cacheable |
| * 0x8000_0000 0xbfff_ffff PCI Express Mem 1.5G non-cacheable |
| * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable |
| * |
| * Localbus non-cacheable |
| * 0xff80_0000 0xff8f_ffff NAND Flash 1M non-cacheable |
| * 0xffb0_0000 0xffbf_ffff Board CPLD 1M non-cacheable |
| * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 |
| * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable |
| */ |
| |
| /* |
| * IFC Definitions |
| */ |
| /* NOR Flash on IFC */ |
| #ifdef CONFIG_SPL_BUILD |
| #define CONFIG_SYS_NO_FLASH |
| #endif |
| |
| #define CONFIG_SYS_FLASH_BASE 0xee000000 |
| #define CONFIG_SYS_MAX_FLASH_SECT 256 /* 32M */ |
| |
| #ifdef CONFIG_PHYS_64BIT |
| #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) |
| #else |
| #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE |
| #endif |
| |
| #define CONFIG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ |
| CSPR_PORT_SIZE_16 | \ |
| CSPR_MSEL_NOR | \ |
| CSPR_V) |
| #define CONFIG_SYS_NOR_AMASK IFC_AMASK(32*1024*1024) |
| #define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(7) |
| /* NOR Flash Timing Params */ |
| #define CONFIG_SYS_NOR_FTIM0 FTIM0_NOR_TACSE(0x4) | \ |
| FTIM0_NOR_TEADC(0x5) | \ |
| FTIM0_NOR_TEAHC(0x5) |
| #define CONFIG_SYS_NOR_FTIM1 FTIM1_NOR_TACO(0x1e) | \ |
| FTIM1_NOR_TRAD_NOR(0x0f) |
| #define CONFIG_SYS_NOR_FTIM2 FTIM2_NOR_TCS(0x4) | \ |
| FTIM2_NOR_TCH(0x4) | \ |
| FTIM2_NOR_TWP(0x1c) |
| #define CONFIG_SYS_NOR_FTIM3 0x0 |
| |
| #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} |
| #define CONFIG_SYS_FLASH_QUIET_TEST |
| #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ |
| #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ |
| |
| #undef CONFIG_SYS_FLASH_CHECKSUM |
| #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ |
| #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ |
| |
| /* CFI for NOR Flash */ |
| #define CONFIG_FLASH_CFI_DRIVER |
| #define CONFIG_SYS_FLASH_CFI |
| #define CONFIG_SYS_FLASH_EMPTY_INFO |
| #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE |
| |
| /* NAND Flash on IFC */ |
| #define CONFIG_SYS_NAND_BASE 0xff800000 |
| #ifdef CONFIG_PHYS_64BIT |
| #define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull |
| #else |
| #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE |
| #endif |
| |
| #define CONFIG_MTD_DEVICE |
| #define CONFIG_MTD_PARTITION |
| #define CONFIG_CMD_MTDPARTS |
| #define MTDIDS_DEFAULT "nand0=ff800000.flash" |
| #define MTDPARTS_DEFAULT \ |
| "mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)" |
| |
| #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ |
| | CSPR_PORT_SIZE_8 \ |
| | CSPR_MSEL_NAND \ |
| | CSPR_V) |
| #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) |
| |
| #if defined(CONFIG_P1010RDB_PA) |
| #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ |
| | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ |
| | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ |
| | CSOR_NAND_RAL_2 /* RAL = 2 Bytes */ \ |
| | CSOR_NAND_PGS_512 /* Page Size = 512b */ \ |
| | CSOR_NAND_SPRZ_16 /* Spare size = 16 */ \ |
| | CSOR_NAND_PB(32)) /* 32 Pages Per Block */ |
| #define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024) |
| |
| #elif defined(CONFIG_P1010RDB_PB) |
| #define CONFIG_SYS_NAND_ONFI_DETECTION |
| #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ |
| | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ |
| | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ |
| | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ |
| | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ |
| | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \ |
| | CSOR_NAND_PB(128)) /*Pages Per Block = 128 */ |
| #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) |
| #endif |
| |
| #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } |
| #define CONFIG_SYS_MAX_NAND_DEVICE 1 |
| #define CONFIG_CMD_NAND |
| |
| #if defined(CONFIG_P1010RDB_PA) |
| /* NAND Flash Timing Params */ |
| #define CONFIG_SYS_NAND_FTIM0 FTIM0_NAND_TCCST(0x01) | \ |
| FTIM0_NAND_TWP(0x0C) | \ |
| FTIM0_NAND_TWCHT(0x04) | \ |
| FTIM0_NAND_TWH(0x05) |
| #define CONFIG_SYS_NAND_FTIM1 FTIM1_NAND_TADLE(0x1d) | \ |
| FTIM1_NAND_TWBE(0x1d) | \ |
| FTIM1_NAND_TRR(0x07) | \ |
| FTIM1_NAND_TRP(0x0c) |
| #define CONFIG_SYS_NAND_FTIM2 FTIM2_NAND_TRAD(0x0c) | \ |
| FTIM2_NAND_TREH(0x05) | \ |
| FTIM2_NAND_TWHRE(0x0f) |
| #define CONFIG_SYS_NAND_FTIM3 FTIM3_NAND_TWW(0x04) |
| |
| #elif defined(CONFIG_P1010RDB_PB) |
| /* support MT29F16G08ABABAWP 4k-pagesize 2G-bytes NAND */ |
| /* ONFI NAND Flash mode0 Timing Params */ |
| #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07)| \ |
| FTIM0_NAND_TWP(0x18) | \ |
| FTIM0_NAND_TWCHT(0x07) | \ |
| FTIM0_NAND_TWH(0x0a)) |
| #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32)| \ |
| FTIM1_NAND_TWBE(0x39) | \ |
| FTIM1_NAND_TRR(0x0e) | \ |
| FTIM1_NAND_TRP(0x18)) |
| #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ |
| FTIM2_NAND_TREH(0x0a) | \ |
| FTIM2_NAND_TWHRE(0x1e)) |
| #define CONFIG_SYS_NAND_FTIM3 0x0 |
| #endif |
| |
| #define CONFIG_SYS_NAND_DDR_LAW 11 |
| |
| /* Set up IFC registers for boot location NOR/NAND */ |
| #if defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT) |
| #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR |
| #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK |
| #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR |
| #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 |
| #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 |
| #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 |
| #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 |
| #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR_CSPR |
| #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK |
| #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR |
| #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 |
| #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 |
| #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 |
| #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 |
| #else |
| #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR |
| #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK |
| #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR |
| #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 |
| #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 |
| #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 |
| #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 |
| #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR |
| #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK |
| #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR |
| #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 |
| #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 |
| #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 |
| #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 |
| #endif |
| |
| /* CPLD on IFC */ |
| #define CONFIG_SYS_CPLD_BASE 0xffb00000 |
| |
| #ifdef CONFIG_PHYS_64BIT |
| #define CONFIG_SYS_CPLD_BASE_PHYS 0xfffb00000ull |
| #else |
| #define CONFIG_SYS_CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE |
| #endif |
| |
| #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ |
| | CSPR_PORT_SIZE_8 \ |
| | CSPR_MSEL_GPCM \ |
| | CSPR_V) |
| #define CONFIG_SYS_AMASK3 IFC_AMASK(64*1024) |
| #define CONFIG_SYS_CSOR3 0x0 |
| /* CPLD Timing parameters for IFC CS3 */ |
| #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ |
| FTIM0_GPCM_TEADC(0x0e) | \ |
| FTIM0_GPCM_TEAHC(0x0e)) |
| #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ |
| FTIM1_GPCM_TRAD(0x1f)) |
| #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ |
| FTIM2_GPCM_TCH(0x8) | \ |
| FTIM2_GPCM_TWP(0x1f)) |
| #define CONFIG_SYS_CS3_FTIM3 0x0 |
| |
| #if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) || \ |
| defined(CONFIG_RAMBOOT_NAND) |
| #define CONFIG_SYS_RAMBOOT |
| #define CONFIG_SYS_EXTRA_ENV_RELOC |
| #else |
| #undef CONFIG_SYS_RAMBOOT |
| #endif |
| |
| #ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A003399 |
| #if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT) |
| #define CONFIG_A003399_NOR_WORKAROUND |
| #endif |
| #endif |
| |
| #define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */ |
| #define CONFIG_BOARD_EARLY_INIT_R |
| |
| #define CONFIG_SYS_INIT_RAM_LOCK |
| #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ |
| #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* End of used area in RAM */ |
| |
| #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \ |
| - GENERATED_GBL_DATA_SIZE) |
| #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET |
| |
| #define CONFIG_SYS_MONITOR_LEN (768 * 1024) |
| #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc*/ |
| |
| /* |
| * Config the L2 Cache as L2 SRAM |
| */ |
| #if defined(CONFIG_SPL_BUILD) |
| #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) |
| #define CONFIG_SYS_INIT_L2_ADDR 0xD0000000 |
| #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR |
| #define CONFIG_SYS_L2_SIZE (256 << 10) |
| #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) |
| #define CONFIG_SPL_RELOC_TEXT_BASE 0xD0001000 |
| #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) |
| #define CONFIG_SPL_RELOC_STACK_SIZE (16 << 10) |
| #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024) |
| #define CONFIG_SPL_RELOC_MALLOC_SIZE (128 << 10) |
| #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 96 * 1024) |
| #elif defined(CONFIG_NAND) |
| #ifdef CONFIG_TPL_BUILD |
| #define CONFIG_SYS_INIT_L2_ADDR 0xD0000000 |
| #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR |
| #define CONFIG_SYS_L2_SIZE (256 << 10) |
| #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) |
| #define CONFIG_SPL_RELOC_TEXT_BASE 0xD0001000 |
| #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) |
| #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) |
| #define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) |
| #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) |
| #else |
| #define CONFIG_SYS_INIT_L2_ADDR 0xD0000000 |
| #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR |
| #define CONFIG_SYS_L2_SIZE (256 << 10) |
| #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) |
| #define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x3000) |
| #define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) |
| #endif |
| #endif |
| #endif |
| |
| /* Serial Port */ |
| #define CONFIG_CONS_INDEX 1 |
| #undef CONFIG_SERIAL_SOFTWARE_FIFO |
| #define CONFIG_SYS_NS16550_SERIAL |
| #define CONFIG_SYS_NS16550_REG_SIZE 1 |
| #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) |
| #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) |
| #define CONFIG_NS16550_MIN_FUNCTIONS |
| #endif |
| |
| #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ |
| |
| #define CONFIG_SYS_BAUDRATE_TABLE \ |
| {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} |
| |
| #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) |
| #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) |
| |
| /* I2C */ |
| #define CONFIG_SYS_I2C |
| #define CONFIG_SYS_I2C_FSL |
| #define CONFIG_SYS_FSL_I2C_SPEED 400000 |
| #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F |
| #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 |
| #define CONFIG_SYS_FSL_I2C2_SPEED 400000 |
| #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F |
| #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 |
| #define I2C_PCA9557_ADDR1 0x18 |
| #define I2C_PCA9557_ADDR2 0x19 |
| #define I2C_PCA9557_BUS_NUM 0 |
| |
| /* I2C EEPROM */ |
| #if defined(CONFIG_P1010RDB_PB) |
| #define CONFIG_ID_EEPROM |
| #ifdef CONFIG_ID_EEPROM |
| #define CONFIG_SYS_I2C_EEPROM_NXID |
| #endif |
| #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 |
| #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 |
| #define CONFIG_SYS_EEPROM_BUS_NUM 0 |
| #define MAX_NUM_PORTS 9 /* for 128Bytes EEPROM */ |
| #endif |
| /* enable read and write access to EEPROM */ |
| #define CONFIG_CMD_EEPROM |
| #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 |
| #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 |
| #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 |
| |
| /* RTC */ |
| #define CONFIG_RTC_PT7C4338 |
| #define CONFIG_SYS_I2C_RTC_ADDR 0x68 |
| |
| /* |
| * SPI interface will not be available in case of NAND boot SPI CS0 will be |
| * used for SLIC |
| */ |
| #if !defined(CONFIG_NAND) || !defined(CONFIG_NAND_SECBOOT) |
| /* eSPI - Enhanced SPI */ |
| #define CONFIG_SF_DEFAULT_SPEED 10000000 |
| #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 |
| #endif |
| |
| #if defined(CONFIG_TSEC_ENET) |
| #define CONFIG_MII /* MII PHY management */ |
| #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ |
| #define CONFIG_TSEC1 1 |
| #define CONFIG_TSEC1_NAME "eTSEC1" |
| #define CONFIG_TSEC2 1 |
| #define CONFIG_TSEC2_NAME "eTSEC2" |
| #define CONFIG_TSEC3 1 |
| #define CONFIG_TSEC3_NAME "eTSEC3" |
| |
| #define TSEC1_PHY_ADDR 1 |
| #define TSEC2_PHY_ADDR 0 |
| #define TSEC3_PHY_ADDR 2 |
| |
| #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) |
| #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) |
| #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) |
| |
| #define TSEC1_PHYIDX 0 |
| #define TSEC2_PHYIDX 0 |
| #define TSEC3_PHYIDX 0 |
| |
| #define CONFIG_ETHPRIME "eTSEC1" |
| |
| #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ |
| |
| /* TBI PHY configuration for SGMII mode */ |
| #define CONFIG_TSEC_TBICR_SETTINGS ( \ |
| TBICR_PHY_RESET \ |
| | TBICR_ANEG_ENABLE \ |
| | TBICR_FULL_DUPLEX \ |
| | TBICR_SPEED1_SET \ |
| ) |
| |
| #endif /* CONFIG_TSEC_ENET */ |
| |
| /* SATA */ |
| #define CONFIG_FSL_SATA |
| #define CONFIG_FSL_SATA_V2 |
| #define CONFIG_LIBATA |
| |
| #ifdef CONFIG_FSL_SATA |
| #define CONFIG_SYS_SATA_MAX_DEVICE 2 |
| #define CONFIG_SATA1 |
| #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR |
| #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA |
| #define CONFIG_SATA2 |
| #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR |
| #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA |
| |
| #define CONFIG_CMD_SATA |
| #define CONFIG_LBA48 |
| #endif /* #ifdef CONFIG_FSL_SATA */ |
| |
| #define CONFIG_MMC |
| #ifdef CONFIG_MMC |
| #define CONFIG_DOS_PARTITION |
| #define CONFIG_FSL_ESDHC |
| #define CONFIG_GENERIC_MMC |
| #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR |
| #endif |
| |
| #define CONFIG_HAS_FSL_DR_USB |
| |
| #if defined(CONFIG_HAS_FSL_DR_USB) |
| #define CONFIG_USB_EHCI |
| |
| #ifdef CONFIG_USB_EHCI |
| #define CONFIG_EHCI_HCD_INIT_AFTER_RESET |
| #define CONFIG_USB_EHCI_FSL |
| #define CONFIG_USB_STORAGE |
| #endif |
| #endif |
| |
| /* |
| * Environment |
| */ |
| #if defined(CONFIG_SDCARD) |
| #define CONFIG_ENV_IS_IN_MMC |
| #define CONFIG_FSL_FIXED_MMC_LOCATION |
| #define CONFIG_SYS_MMC_ENV_DEV 0 |
| #define CONFIG_ENV_SIZE 0x2000 |
| #elif defined(CONFIG_SPIFLASH) |
| #define CONFIG_ENV_IS_IN_SPI_FLASH |
| #define CONFIG_ENV_SPI_BUS 0 |
| #define CONFIG_ENV_SPI_CS 0 |
| #define CONFIG_ENV_SPI_MAX_HZ 10000000 |
| #define CONFIG_ENV_SPI_MODE 0 |
| #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ |
| #define CONFIG_ENV_SECT_SIZE 0x10000 |
| #define CONFIG_ENV_SIZE 0x2000 |
| #elif defined(CONFIG_NAND) |
| #define CONFIG_ENV_IS_IN_NAND |
| #ifdef CONFIG_TPL_BUILD |
| #define CONFIG_ENV_SIZE 0x2000 |
| #define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) |
| #else |
| #if defined(CONFIG_P1010RDB_PA) |
| #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE |
| #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) /* 3*16=48K for env */ |
| #elif defined(CONFIG_P1010RDB_PB) |
| #define CONFIG_ENV_SIZE (16 * 1024) |
| #define CONFIG_ENV_RANGE (32 * CONFIG_ENV_SIZE) /* new block size 512K */ |
| #endif |
| #endif |
| #define CONFIG_ENV_OFFSET (1024 * 1024) |
| #elif defined(CONFIG_SYS_RAMBOOT) |
| #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ |
| #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) |
| #define CONFIG_ENV_SIZE 0x2000 |
| #else |
| #define CONFIG_ENV_IS_IN_FLASH |
| #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) |
| #define CONFIG_ENV_SIZE 0x2000 |
| #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ |
| #endif |
| |
| #define CONFIG_LOADS_ECHO /* echo on for serial download */ |
| #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ |
| |
| /* |
| * Command line configuration. |
| */ |
| #define CONFIG_CMD_DATE |
| #define CONFIG_CMD_ERRATA |
| #define CONFIG_CMD_IRQ |
| #define CONFIG_CMD_REGINFO |
| |
| #undef CONFIG_WATCHDOG /* watchdog disabled */ |
| |
| #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \ |
| || defined(CONFIG_FSL_SATA) |
| #define CONFIG_DOS_PARTITION |
| #endif |
| |
| /* Hash command with SHA acceleration supported in hardware */ |
| #ifdef CONFIG_FSL_CAAM |
| #define CONFIG_CMD_HASH |
| #define CONFIG_SHA_HW_ACCEL |
| #endif |
| |
| /* |
| * Miscellaneous configurable options |
| */ |
| #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
| #define CONFIG_CMDLINE_EDITING /* Command-line editing */ |
| #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ |
| #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ |
| |
| #if defined(CONFIG_CMD_KGDB) |
| #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ |
| #else |
| #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
| #endif |
| #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) |
| /* Print Buffer Size */ |
| #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ |
| #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ |
| |
| /* |
| * For booting Linux, the board info and command line data |
| * have to be in the first 64 MB of memory, since this is |
| * the maximum mapped by the Linux kernel during initialization. |
| */ |
| #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */ |
| #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ |
| |
| #if defined(CONFIG_CMD_KGDB) |
| #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ |
| #endif |
| |
| /* |
| * Environment Configuration |
| */ |
| |
| #if defined(CONFIG_TSEC_ENET) |
| #define CONFIG_HAS_ETH0 |
| #define CONFIG_HAS_ETH1 |
| #define CONFIG_HAS_ETH2 |
| #endif |
| |
| #define CONFIG_ROOTPATH "/opt/nfsroot" |
| #define CONFIG_BOOTFILE "uImage" |
| #define CONFIG_UBOOTPATH u-boot.bin/* U-Boot image on TFTP server */ |
| |
| /* default location for tftp and bootm */ |
| #define CONFIG_LOADADDR 1000000 |
| |
| #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ |
| |
| #define CONFIG_BAUDRATE 115200 |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG) "\0" \ |
| "netdev=eth0\0" \ |
| "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ |
| "loadaddr=1000000\0" \ |
| "consoledev=ttyS0\0" \ |
| "ramdiskaddr=2000000\0" \ |
| "ramdiskfile=rootfs.ext2.gz.uboot\0" \ |
| "fdtaddr=1e00000\0" \ |
| "fdtfile=p1010rdb.dtb\0" \ |
| "bdev=sda1\0" \ |
| "hwconfig=usb1:dr_mode=host,phy_type=utmi\0" \ |
| "othbootargs=ramdisk_size=600000\0" \ |
| "usbfatboot=setenv bootargs root=/dev/ram rw " \ |
| "console=$consoledev,$baudrate $othbootargs; " \ |
| "usb start;" \ |
| "fatload usb 0:2 $loadaddr $bootfile;" \ |
| "fatload usb 0:2 $fdtaddr $fdtfile;" \ |
| "fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \ |
| "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ |
| "usbext2boot=setenv bootargs root=/dev/ram rw " \ |
| "console=$consoledev,$baudrate $othbootargs; " \ |
| "usb start;" \ |
| "ext2load usb 0:4 $loadaddr $bootfile;" \ |
| "ext2load usb 0:4 $fdtaddr $fdtfile;" \ |
| "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ |
| "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ |
| CONFIG_BOOTMODE |
| |
| #if defined(CONFIG_P1010RDB_PA) |
| #define CONFIG_BOOTMODE \ |
| "boot_bank0=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \ |
| "mw.b ffb00011 0; mw.b ffb00009 0; reset\0" \ |
| "boot_bank1=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \ |
| "mw.b ffb00011 0; mw.b ffb00009 1; reset\0" \ |
| "boot_nand=i2c dev 0; i2c mw 18 1 f9; i2c mw 18 3 f0;" \ |
| "mw.b ffb00011 0; mw.b ffb00017 1; reset\0" |
| |
| #elif defined(CONFIG_P1010RDB_PB) |
| #define CONFIG_BOOTMODE \ |
| "boot_bank0=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \ |
| "i2c mw 19 1 2; i2c mw 19 3 e1; reset\0" \ |
| "boot_bank1=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \ |
| "i2c mw 19 1 12; i2c mw 19 3 e1; reset\0" \ |
| "boot_nand=i2c dev 0; i2c mw 18 1 fc; i2c mw 18 3 0;" \ |
| "i2c mw 19 1 8; i2c mw 19 3 f7; reset\0" \ |
| "boot_spi=i2c dev 0; i2c mw 18 1 fa; i2c mw 18 3 0;" \ |
| "i2c mw 19 1 0; i2c mw 19 3 f7; reset\0" \ |
| "boot_sd=i2c dev 0; i2c mw 18 1 f8; i2c mw 18 3 0;" \ |
| "i2c mw 19 1 4; i2c mw 19 3 f3; reset\0" |
| #endif |
| |
| #define CONFIG_RAMBOOTCOMMAND \ |
| "setenv bootargs root=/dev/ram rw " \ |
| "console=$consoledev,$baudrate $othbootargs; " \ |
| "tftp $ramdiskaddr $ramdiskfile;" \ |
| "tftp $loadaddr $bootfile;" \ |
| "tftp $fdtaddr $fdtfile;" \ |
| "bootm $loadaddr $ramdiskaddr $fdtaddr" |
| |
| #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND |
| |
| #include <asm/fsl_secure_boot.h> |
| |
| #endif /* __CONFIG_H */ |