| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Microchip PIC32 MUSB "glue layer" |
| * |
| * Copyright (C) 2015, Microchip Technology Inc. |
| * Cristian Birsan <cristian.birsan@microchip.com> |
| * Purna Chandra Mandal <purna.mandal@microchip.com> |
| * |
| * Based on the dsps "glue layer" code. |
| */ |
| |
| #include <common.h> |
| #include <dm/device_compat.h> |
| #include <linux/delay.h> |
| #include <linux/usb/musb.h> |
| #include "linux-compat.h" |
| #include "musb_core.h" |
| #include "musb_uboot.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define PIC32_TX_EP_MASK 0x0f /* EP0 + 7 Tx EPs */ |
| #define PIC32_RX_EP_MASK 0x0e /* 7 Rx EPs */ |
| |
| #define MUSB_SOFTRST 0x7f |
| #define MUSB_SOFTRST_NRST BIT(0) |
| #define MUSB_SOFTRST_NRSTX BIT(1) |
| |
| #define USBCRCON 0 |
| #define USBCRCON_USBWKUPEN BIT(0) /* Enable Wakeup Interrupt */ |
| #define USBCRCON_USBRIE BIT(1) /* Enable Remote resume Interrupt */ |
| #define USBCRCON_USBIE BIT(2) /* Enable USB General interrupt */ |
| #define USBCRCON_SENDMONEN BIT(3) /* Enable Session End VBUS monitoring */ |
| #define USBCRCON_BSVALMONEN BIT(4) /* Enable B-Device VBUS monitoring */ |
| #define USBCRCON_ASVALMONEN BIT(5) /* Enable A-Device VBUS monitoring */ |
| #define USBCRCON_VBUSMONEN BIT(6) /* Enable VBUS monitoring */ |
| #define USBCRCON_PHYIDEN BIT(7) /* PHY ID monitoring enable */ |
| #define USBCRCON_USBIDVAL BIT(8) /* USB ID value */ |
| #define USBCRCON_USBIDOVEN BIT(9) /* USB ID override enable */ |
| #define USBCRCON_USBWK BIT(24) /* USB Wakeup Status */ |
| #define USBCRCON_USBRF BIT(25) /* USB Resume Status */ |
| #define USBCRCON_USBIF BIT(26) /* USB General Interrupt Status */ |
| |
| /* PIC32 controller data */ |
| struct pic32_musb_data { |
| struct musb_host_data mdata; |
| struct device dev; |
| void __iomem *musb_glue; |
| }; |
| |
| #define to_pic32_musb_data(d) \ |
| container_of(d, struct pic32_musb_data, dev) |
| |
| static void pic32_musb_disable(struct musb *musb) |
| { |
| /* no way to shut the controller */ |
| } |
| |
| static int pic32_musb_enable(struct musb *musb) |
| { |
| /* soft reset by NRSTx */ |
| musb_writeb(musb->mregs, MUSB_SOFTRST, MUSB_SOFTRST_NRSTX); |
| /* set mode */ |
| musb_platform_set_mode(musb, musb->board_mode); |
| |
| return 0; |
| } |
| |
| static irqreturn_t pic32_interrupt(int irq, void *hci) |
| { |
| struct musb *musb = hci; |
| irqreturn_t ret = IRQ_NONE; |
| u32 epintr, usbintr; |
| |
| /* ack usb core interrupts */ |
| musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB); |
| if (musb->int_usb) |
| musb_writeb(musb->mregs, MUSB_INTRUSB, musb->int_usb); |
| |
| /* ack endpoint interrupts */ |
| musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX) & PIC32_RX_EP_MASK; |
| if (musb->int_rx) |
| musb_writew(musb->mregs, MUSB_INTRRX, musb->int_rx); |
| |
| musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX) & PIC32_TX_EP_MASK; |
| if (musb->int_tx) |
| musb_writew(musb->mregs, MUSB_INTRTX, musb->int_tx); |
| |
| /* drop spurious RX and TX if device is disconnected */ |
| if (musb->int_usb & MUSB_INTR_DISCONNECT) { |
| musb->int_tx = 0; |
| musb->int_rx = 0; |
| } |
| |
| if (musb->int_tx || musb->int_rx || musb->int_usb) |
| ret = musb_interrupt(musb); |
| |
| return ret; |
| } |
| |
| static int pic32_musb_set_mode(struct musb *musb, u8 mode) |
| { |
| struct device *dev = musb->controller; |
| struct pic32_musb_data *pdata = to_pic32_musb_data(dev); |
| |
| switch (mode) { |
| case MUSB_HOST: |
| clrsetbits_le32(pdata->musb_glue + USBCRCON, |
| USBCRCON_USBIDVAL, USBCRCON_USBIDOVEN); |
| break; |
| case MUSB_PERIPHERAL: |
| setbits_le32(pdata->musb_glue + USBCRCON, |
| USBCRCON_USBIDVAL | USBCRCON_USBIDOVEN); |
| break; |
| case MUSB_OTG: |
| dev_err(dev, "support for OTG is unimplemented\n"); |
| break; |
| default: |
| dev_err(dev, "unsupported mode %d\n", mode); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int pic32_musb_init(struct musb *musb) |
| { |
| struct pic32_musb_data *pdata = to_pic32_musb_data(musb->controller); |
| u32 ctrl, hwvers; |
| u8 power; |
| |
| /* Returns zero if not clocked */ |
| hwvers = musb_read_hwvers(musb->mregs); |
| if (!hwvers) |
| return -ENODEV; |
| |
| /* Reset the musb */ |
| power = musb_readb(musb->mregs, MUSB_POWER); |
| power = power | MUSB_POWER_RESET; |
| musb_writeb(musb->mregs, MUSB_POWER, power); |
| mdelay(100); |
| |
| /* Start the on-chip PHY and its PLL. */ |
| power = power & ~MUSB_POWER_RESET; |
| musb_writeb(musb->mregs, MUSB_POWER, power); |
| |
| musb->isr = pic32_interrupt; |
| |
| ctrl = USBCRCON_USBIF | USBCRCON_USBRF | |
| USBCRCON_USBWK | USBCRCON_USBIDOVEN | |
| USBCRCON_PHYIDEN | USBCRCON_USBIE | |
| USBCRCON_USBRIE | USBCRCON_USBWKUPEN | |
| USBCRCON_VBUSMONEN; |
| writel(ctrl, pdata->musb_glue + USBCRCON); |
| |
| return 0; |
| } |
| |
| /* PIC32 supports only 32bit read operation */ |
| void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) |
| { |
| void __iomem *fifo = hw_ep->fifo; |
| u32 val, rem = len % 4; |
| |
| /* USB stack ensures dst is always 32bit aligned. */ |
| readsl(fifo, dst, len / 4); |
| if (rem) { |
| dst += len & ~0x03; |
| val = musb_readl(fifo, 0); |
| memcpy(dst, &val, rem); |
| } |
| } |
| |
| const struct musb_platform_ops pic32_musb_ops = { |
| .init = pic32_musb_init, |
| .set_mode = pic32_musb_set_mode, |
| .disable = pic32_musb_disable, |
| .enable = pic32_musb_enable, |
| }; |
| |
| /* PIC32 default FIFO config - fits in 8KB */ |
| static struct musb_fifo_cfg pic32_musb_fifo_config[] = { |
| { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, |
| { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, |
| { .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, }, |
| { .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, }, |
| { .hw_ep_num = 3, .style = FIFO_TX, .maxpacket = 512, }, |
| { .hw_ep_num = 3, .style = FIFO_RX, .maxpacket = 512, }, |
| { .hw_ep_num = 4, .style = FIFO_TX, .maxpacket = 512, }, |
| { .hw_ep_num = 4, .style = FIFO_RX, .maxpacket = 512, }, |
| { .hw_ep_num = 5, .style = FIFO_TX, .maxpacket = 512, }, |
| { .hw_ep_num = 5, .style = FIFO_RX, .maxpacket = 512, }, |
| { .hw_ep_num = 6, .style = FIFO_TX, .maxpacket = 512, }, |
| { .hw_ep_num = 6, .style = FIFO_RX, .maxpacket = 512, }, |
| { .hw_ep_num = 7, .style = FIFO_TX, .maxpacket = 512, }, |
| { .hw_ep_num = 7, .style = FIFO_RX, .maxpacket = 512, }, |
| }; |
| |
| static struct musb_hdrc_config pic32_musb_config = { |
| .fifo_cfg = pic32_musb_fifo_config, |
| .fifo_cfg_size = ARRAY_SIZE(pic32_musb_fifo_config), |
| .multipoint = 1, |
| .dyn_fifo = 1, |
| .num_eps = 8, |
| .ram_bits = 11, |
| }; |
| |
| /* PIC32 has one MUSB controller which can be host or gadget */ |
| static struct musb_hdrc_platform_data pic32_musb_plat = { |
| .mode = MUSB_HOST, |
| .config = &pic32_musb_config, |
| .power = 250, /* 500mA */ |
| .platform_ops = &pic32_musb_ops, |
| }; |
| |
| static int musb_usb_probe(struct udevice *dev) |
| { |
| struct usb_bus_priv *priv = dev_get_uclass_priv(dev); |
| struct pic32_musb_data *pdata = dev_get_priv(dev); |
| struct musb_host_data *mdata = &pdata->mdata; |
| struct fdt_resource mc, glue; |
| void *fdt = (void *)gd->fdt_blob; |
| int node = dev_of_offset(dev); |
| void __iomem *mregs; |
| int ret; |
| |
| priv->desc_before_addr = true; |
| |
| ret = fdt_get_named_resource(fdt, node, "reg", "reg-names", |
| "mc", &mc); |
| if (ret < 0) { |
| printf("pic32-musb: resource \"mc\" not found\n"); |
| return ret; |
| } |
| |
| ret = fdt_get_named_resource(fdt, node, "reg", "reg-names", |
| "control", &glue); |
| if (ret < 0) { |
| printf("pic32-musb: resource \"control\" not found\n"); |
| return ret; |
| } |
| |
| mregs = ioremap(mc.start, fdt_resource_size(&mc)); |
| pdata->musb_glue = ioremap(glue.start, fdt_resource_size(&glue)); |
| |
| /* init controller */ |
| #ifdef CONFIG_USB_MUSB_HOST |
| mdata->host = musb_init_controller(&pic32_musb_plat, |
| &pdata->dev, mregs); |
| if (!mdata->host) |
| return -EIO; |
| |
| ret = musb_lowlevel_init(mdata); |
| #else |
| pic32_musb_plat.mode = MUSB_PERIPHERAL; |
| mdata->host = musb_register(&pic32_musb_plat, &pdata->dev, mregs); |
| if (!mdata->host) |
| return -EIO; |
| #endif |
| if ((ret == 0) && mdata->host) |
| printf("PIC32 MUSB OTG\n"); |
| |
| return ret; |
| } |
| |
| static int musb_usb_remove(struct udevice *dev) |
| { |
| struct pic32_musb_data *pdata = dev_get_priv(dev); |
| |
| musb_stop(pdata->mdata.host); |
| |
| return 0; |
| } |
| |
| static const struct udevice_id pic32_musb_ids[] = { |
| { .compatible = "microchip,pic32mzda-usb" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(usb_musb) = { |
| .name = "pic32-musb", |
| .id = UCLASS_USB, |
| .of_match = pic32_musb_ids, |
| .probe = musb_usb_probe, |
| .remove = musb_usb_remove, |
| #ifdef CONFIG_USB_MUSB_HOST |
| .ops = &musb_usb_ops, |
| #endif |
| .platdata_auto_alloc_size = sizeof(struct usb_platdata), |
| .priv_auto_alloc_size = sizeof(struct pic32_musb_data), |
| }; |