| /* |
| * (C) Copyright 2010, Stefano Babic <sbabic@denx.de> |
| * |
| * (C) Copyright 2008-2010 Freescale Semiconductor, Inc. |
| * |
| * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> |
| * |
| * Configuration for the MX35pdk Freescale board. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| #include <asm/arch/imx-regs.h> |
| |
| /* High Level Configuration Options */ |
| #define CONFIG_MX35 |
| |
| #define CONFIG_SYS_FSL_CLK |
| |
| /* Set TEXT at the beginning of the NOR flash */ |
| #define CONFIG_SYS_TEXT_BASE 0xA0000000 |
| |
| #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ |
| #define CONFIG_REVISION_TAG |
| #define CONFIG_SETUP_MEMORY_TAGS |
| #define CONFIG_INITRD_TAG |
| |
| /* |
| * Size of malloc() pool |
| */ |
| #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024) |
| |
| /* |
| * Hardware drivers |
| */ |
| #define CONFIG_SYS_I2C |
| #define CONFIG_SYS_I2C_MXC |
| #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ |
| #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ |
| #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ |
| #define CONFIG_MXC_SPI |
| #define CONFIG_MXC_GPIO |
| |
| /* |
| * PMIC Configs |
| */ |
| #define CONFIG_POWER |
| #define CONFIG_POWER_I2C |
| #define CONFIG_POWER_FSL |
| #define CONFIG_POWER_FSL_MC13892 |
| #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x08 |
| #define CONFIG_RTC_MC13XXX |
| |
| /* |
| * MFD MC9SDZ60 |
| */ |
| #define CONFIG_FSL_MC9SDZ60 |
| #define CONFIG_SYS_FSL_MC9SDZ60_I2C_ADDR 0x69 |
| |
| /* |
| * UART (console) |
| */ |
| #define CONFIG_MXC_UART |
| #define CONFIG_MXC_UART_BASE UART1_BASE |
| |
| /* allow to overwrite serial and ethaddr */ |
| #define CONFIG_ENV_OVERWRITE |
| #define CONFIG_CONS_INDEX 1 |
| |
| /* |
| * Command definition |
| */ |
| #define CONFIG_BOOTP_SUBNETMASK |
| #define CONFIG_BOOTP_GATEWAY |
| #define CONFIG_BOOTP_DNS |
| |
| #define CONFIG_CMD_NAND |
| |
| #define CONFIG_NET_RETRY_COUNT 100 |
| |
| |
| #define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */ |
| |
| /* |
| * Ethernet on the debug board (SMC911) |
| */ |
| #define CONFIG_SMC911X |
| #define CONFIG_SMC911X_16_BIT 1 |
| #define CONFIG_SMC911X_BASE CS5_BASE_ADDR |
| |
| #define CONFIG_HAS_ETH1 |
| #define CONFIG_ETHPRIME |
| |
| /* |
| * Ethernet on SOC (FEC) |
| */ |
| #define CONFIG_FEC_MXC |
| #define IMX_FEC_BASE FEC_BASE_ADDR |
| #define CONFIG_FEC_MXC_PHYADDR 0x1F |
| |
| #define CONFIG_MII |
| |
| #define CONFIG_ARP_TIMEOUT 200UL |
| |
| /* |
| * Miscellaneous configurable options |
| */ |
| #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
| #define CONFIG_CMDLINE_EDITING |
| |
| #define CONFIG_AUTO_COMPLETE |
| #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
| #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ |
| #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ |
| |
| #define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */ |
| #define CONFIG_SYS_MEMTEST_END 0x10000 |
| |
| #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR |
| |
| /* |
| * Physical Memory Map |
| */ |
| #define CONFIG_NR_DRAM_BANKS 2 |
| #define PHYS_SDRAM_1 CSD0_BASE_ADDR |
| #define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) |
| #define PHYS_SDRAM_2 CSD1_BASE_ADDR |
| #define PHYS_SDRAM_2_SIZE (128 * 1024 * 1024) |
| |
| #define CONFIG_SYS_SDRAM_BASE CSD0_BASE_ADDR |
| #define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR + 0x10000) |
| #define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE / 2) |
| #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ |
| GENERATED_GBL_DATA_SIZE) |
| #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ |
| CONFIG_SYS_GBL_DATA_OFFSET) |
| |
| /* |
| * MTD Command for mtdparts |
| */ |
| #define CONFIG_MTD_DEVICE |
| #define CONFIG_FLASH_CFI_MTD |
| #define CONFIG_MTD_PARTITIONS |
| #define MTDIDS_DEFAULT "nand0=mxc_nand,nor0=physmap-flash.0" |
| #define MTDPARTS_DEFAULT "mtdparts=mxc_nand:1m(boot),5m(linux)," \ |
| "96m(root),8m(cfg),1938m(user);" \ |
| "physmap-flash.0:512k(b),4m(k),30m(u),28m(r)" |
| |
| /* |
| * FLASH and environment organization |
| */ |
| #define CONFIG_SYS_FLASH_BASE CS0_BASE_ADDR |
| #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ |
| #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ |
| /* Monitor at beginning of flash */ |
| #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE |
| #define CONFIG_SYS_MONITOR_LEN (512 * 1024) |
| |
| #define CONFIG_ENV_SECT_SIZE (128 * 1024) |
| #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE |
| |
| /* Address and size of Redundant Environment Sector */ |
| #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) |
| #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE |
| |
| #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ |
| CONFIG_SYS_MONITOR_LEN) |
| |
| #if defined(CONFIG_FSL_ENV_IN_NAND) |
| #define CONFIG_ENV_OFFSET (1024 * 1024) |
| #endif |
| |
| /* |
| * CFI FLASH driver setup |
| */ |
| #define CONFIG_SYS_FLASH_CFI /* Flash memory is CFI compliant */ |
| #define CONFIG_FLASH_CFI_DRIVER |
| |
| /* A non-standard buffered write algorithm */ |
| #define CONFIG_FLASH_SPANSION_S29WS_N |
| #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* faster */ |
| #define CONFIG_SYS_FLASH_PROTECTION /* Use hardware sector protection */ |
| |
| /* |
| * NAND FLASH driver setup |
| */ |
| #define CONFIG_NAND_MXC |
| #define CONFIG_MXC_NAND_REGS_BASE (NFC_BASE_ADDR) |
| #define CONFIG_SYS_MAX_NAND_DEVICE 1 |
| #define CONFIG_SYS_NAND_BASE (NFC_BASE_ADDR) |
| #define CONFIG_MXC_NAND_HWECC |
| #define CONFIG_SYS_NAND_LARGEPAGE |
| |
| /* EHCI driver */ |
| #define CONFIG_EHCI_IS_TDI |
| #define CONFIG_EHCI_HCD_INIT_AFTER_RESET |
| #define CONFIG_USB_EHCI_MXC |
| #define CONFIG_MXC_USB_PORT 0 |
| #define CONFIG_MXC_USB_FLAGS (MXC_EHCI_INTERFACE_DIFF_UNI | \ |
| MXC_EHCI_POWER_PINS_ENABLED | \ |
| MXC_EHCI_OC_PIN_ACTIVE_LOW) |
| #define CONFIG_MXC_USB_PORTSC (MXC_EHCI_UTMI_16BIT | MXC_EHCI_MODE_UTMI) |
| |
| /* mmc driver */ |
| #define CONFIG_FSL_ESDHC |
| #define CONFIG_SYS_FSL_ESDHC_ADDR 0 |
| #define CONFIG_SYS_FSL_ESDHC_NUM 1 |
| |
| /* |
| * Default environment and default scripts |
| * to update uboot and load kernel |
| */ |
| |
| #define CONFIG_HOSTNAME "mx35pdk" |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "netdev=eth1\0" \ |
| "ethprime=smc911x\0" \ |
| "nfsargs=setenv bootargs root=/dev/nfs rw " \ |
| "nfsroot=${serverip}:${rootpath}\0" \ |
| "ramargs=setenv bootargs root=/dev/ram rw\0" \ |
| "addip_sta=setenv bootargs ${bootargs} " \ |
| "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ |
| ":${hostname}:${netdev}:off panic=1\0" \ |
| "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \ |
| "addip=if test -n ${ipdyn};then run addip_dyn;" \ |
| "else run addip_sta;fi\0" \ |
| "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ |
| "addtty=setenv bootargs ${bootargs}" \ |
| " console=ttymxc0,${baudrate}\0" \ |
| "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ |
| "loadaddr=80800000\0" \ |
| "kernel_addr_r=80800000\0" \ |
| "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \ |
| "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \ |
| "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0" \ |
| "flash_self=run ramargs addip addtty addmtd addmisc;" \ |
| "bootm ${kernel_addr} ${ramdisk_addr}\0" \ |
| "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \ |
| "bootm ${kernel_addr}\0" \ |
| "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ |
| "run nfsargs addip addtty addmtd addmisc;" \ |
| "bootm ${kernel_addr_r}\0" \ |
| "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \ |
| "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \ |
| "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \ |
| "load=tftp ${loadaddr} ${u-boot}\0" \ |
| "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \ |
| "update=protect off ${uboot_addr} +80000;" \ |
| "erase ${uboot_addr} +80000;" \ |
| "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \ |
| "upd=if run load;then echo Updating u-boot;if run update;" \ |
| "then echo U-Boot updated;" \ |
| "else echo Error updating u-boot !;" \ |
| "echo Board without bootloader !!;" \ |
| "fi;" \ |
| "else echo U-Boot not downloaded..exiting;fi\0" \ |
| "bootcmd=run net_nfs\0" |
| |
| #endif /* __CONFIG_H */ |