| // SPDX-License-Identifier: GPL-2.0+ OR X11 |
| /* |
| * Copyright 2018-2019 NXP |
| * |
| * PCIe Gen4 driver for NXP Layerscape SoCs |
| * Author: Hou Zhiqiang <Minder.Hou@gmail.com> |
| * |
| */ |
| |
| #include <common.h> |
| #include <pci.h> |
| #include <asm/arch/fsl_serdes.h> |
| #include <asm/io.h> |
| #include <errno.h> |
| #ifdef CONFIG_OF_BOARD_SETUP |
| #include <linux/libfdt.h> |
| #include <fdt_support.h> |
| #ifdef CONFIG_ARM |
| #include <asm/arch/clock.h> |
| #endif |
| #include "pcie_layerscape_gen4.h" |
| |
| #if defined(CONFIG_FSL_LSCH3) || defined(CONFIG_FSL_LSCH2) |
| /* |
| * Return next available LUT index. |
| */ |
| static int ls_pcie_g4_next_lut_index(struct ls_pcie_g4 *pcie) |
| { |
| if (pcie->next_lut_index < PCIE_LUT_ENTRY_COUNT) |
| return pcie->next_lut_index++; |
| |
| return -ENOSPC; /* LUT is full */ |
| } |
| |
| /* returns the next available streamid for pcie, -errno if failed */ |
| static int ls_pcie_g4_next_streamid(struct ls_pcie_g4 *pcie) |
| { |
| int stream_id = pcie->stream_id_cur; |
| |
| if (stream_id > FSL_PEX_STREAM_ID_END) |
| return -EINVAL; |
| |
| pcie->stream_id_cur++; |
| |
| return stream_id | ((pcie->idx + 1) << 11); |
| } |
| |
| /* |
| * Program a single LUT entry |
| */ |
| static void ls_pcie_g4_lut_set_mapping(struct ls_pcie_g4 *pcie, int index, |
| u32 devid, u32 streamid) |
| { |
| /* leave mask as all zeroes, want to match all bits */ |
| lut_writel(pcie, devid << 16, PCIE_LUT_UDR(index)); |
| lut_writel(pcie, streamid | PCIE_LUT_ENABLE, PCIE_LUT_LDR(index)); |
| } |
| |
| /* |
| * An msi-map is a property to be added to the pci controller |
| * node. It is a table, where each entry consists of 4 fields |
| * e.g.: |
| * |
| * msi-map = <[devid] [phandle-to-msi-ctrl] [stream-id] [count] |
| * [devid] [phandle-to-msi-ctrl] [stream-id] [count]>; |
| */ |
| static void fdt_pcie_set_msi_map_entry_ls_gen4(void *blob, |
| struct ls_pcie_g4 *pcie, |
| u32 devid, u32 streamid) |
| { |
| u32 *prop; |
| u32 phandle; |
| int nodeoff; |
| |
| #ifdef CONFIG_FSL_PCIE_COMPAT |
| nodeoff = fdt_node_offset_by_compat_reg(blob, CONFIG_FSL_PCIE_COMPAT, |
| pcie->ccsr_res.start); |
| #else |
| #error "No CONFIG_FSL_PCIE_COMPAT defined" |
| #endif |
| if (nodeoff < 0) { |
| debug("%s: ERROR: failed to find pcie compatiable\n", __func__); |
| return; |
| } |
| |
| /* get phandle to MSI controller */ |
| prop = (u32 *)fdt_getprop(blob, nodeoff, "msi-parent", 0); |
| if (!prop) { |
| debug("\n%s: ERROR: missing msi-parent: PCIe%d\n", |
| __func__, pcie->idx); |
| return; |
| } |
| phandle = fdt32_to_cpu(*prop); |
| |
| /* set one msi-map row */ |
| fdt_appendprop_u32(blob, nodeoff, "msi-map", devid); |
| fdt_appendprop_u32(blob, nodeoff, "msi-map", phandle); |
| fdt_appendprop_u32(blob, nodeoff, "msi-map", streamid); |
| fdt_appendprop_u32(blob, nodeoff, "msi-map", 1); |
| } |
| |
| /* |
| * An iommu-map is a property to be added to the pci controller |
| * node. It is a table, where each entry consists of 4 fields |
| * e.g.: |
| * |
| * iommu-map = <[devid] [phandle-to-iommu-ctrl] [stream-id] [count] |
| * [devid] [phandle-to-iommu-ctrl] [stream-id] [count]>; |
| */ |
| static void fdt_pcie_set_iommu_map_entry_ls_gen4(void *blob, |
| struct ls_pcie_g4 *pcie, |
| u32 devid, u32 streamid) |
| { |
| u32 *prop; |
| u32 iommu_map[4]; |
| int nodeoff; |
| int lenp; |
| |
| #ifdef CONFIG_FSL_PCIE_COMPAT |
| nodeoff = fdt_node_offset_by_compat_reg(blob, CONFIG_FSL_PCIE_COMPAT, |
| pcie->ccsr_res.start); |
| #else |
| #error "No CONFIG_FSL_PCIE_COMPAT defined" |
| #endif |
| if (nodeoff < 0) { |
| debug("%s: ERROR: failed to find pcie compatiable\n", __func__); |
| return; |
| } |
| |
| /* get phandle to iommu controller */ |
| prop = fdt_getprop_w(blob, nodeoff, "iommu-map", &lenp); |
| if (!prop) { |
| debug("\n%s: ERROR: missing iommu-map: PCIe%d\n", |
| __func__, pcie->idx); |
| return; |
| } |
| |
| /* set iommu-map row */ |
| iommu_map[0] = cpu_to_fdt32(devid); |
| iommu_map[1] = *++prop; |
| iommu_map[2] = cpu_to_fdt32(streamid); |
| iommu_map[3] = cpu_to_fdt32(1); |
| |
| if (devid == 0) |
| fdt_setprop_inplace(blob, nodeoff, "iommu-map", iommu_map, 16); |
| else |
| fdt_appendprop(blob, nodeoff, "iommu-map", iommu_map, 16); |
| } |
| |
| static void fdt_fixup_pcie_ls_gen4(void *blob) |
| { |
| struct udevice *dev, *bus; |
| struct ls_pcie_g4 *pcie; |
| int streamid; |
| int index; |
| pci_dev_t bdf; |
| |
| /* Scan all known buses */ |
| for (pci_find_first_device(&dev); dev; pci_find_next_device(&dev)) { |
| for (bus = dev; device_is_on_pci_bus(bus);) |
| bus = bus->parent; |
| pcie = dev_get_priv(bus); |
| |
| streamid = ls_pcie_g4_next_streamid(pcie); |
| if (streamid < 0) { |
| debug("ERROR: no stream ids free\n"); |
| continue; |
| } |
| |
| index = ls_pcie_g4_next_lut_index(pcie); |
| if (index < 0) { |
| debug("ERROR: no LUT indexes free\n"); |
| continue; |
| } |
| |
| /* the DT fixup must be relative to the hose first_busno */ |
| bdf = dm_pci_get_bdf(dev) - PCI_BDF(bus->seq, 0, 0); |
| /* map PCI b.d.f to streamID in LUT */ |
| ls_pcie_g4_lut_set_mapping(pcie, index, bdf >> 8, streamid); |
| /* update msi-map in device tree */ |
| fdt_pcie_set_msi_map_entry_ls_gen4(blob, pcie, bdf >> 8, |
| streamid); |
| /* update iommu-map in device tree */ |
| fdt_pcie_set_iommu_map_entry_ls_gen4(blob, pcie, bdf >> 8, |
| streamid); |
| } |
| } |
| #endif |
| |
| static void ft_pcie_ep_layerscape_gen4_fix(void *blob, struct ls_pcie_g4 *pcie) |
| { |
| int off; |
| |
| off = fdt_node_offset_by_compat_reg(blob, CONFIG_FSL_PCIE_EP_COMPAT, |
| pcie->ccsr_res.start); |
| |
| if (off < 0) { |
| debug("%s: ERROR: failed to find pcie compatiable\n", |
| __func__); |
| return; |
| } |
| |
| if (pcie->enabled && pcie->mode == PCI_HEADER_TYPE_NORMAL) |
| fdt_set_node_status(blob, off, FDT_STATUS_OKAY, 0); |
| else |
| fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0); |
| } |
| |
| static void ft_pcie_rc_layerscape_gen4_fix(void *blob, struct ls_pcie_g4 *pcie) |
| { |
| int off; |
| |
| #ifdef CONFIG_FSL_PCIE_COMPAT |
| off = fdt_node_offset_by_compat_reg(blob, CONFIG_FSL_PCIE_COMPAT, |
| pcie->ccsr_res.start); |
| #else |
| #error "No CONFIG_FSL_PCIE_COMPAT defined" |
| #endif |
| if (off < 0) { |
| debug("%s: ERROR: failed to find pcie compatiable\n", __func__); |
| return; |
| } |
| |
| if (pcie->enabled && pcie->mode == PCI_HEADER_TYPE_BRIDGE) |
| fdt_set_node_status(blob, off, FDT_STATUS_OKAY, 0); |
| else |
| fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0); |
| } |
| |
| static void ft_pcie_layerscape_gen4_setup(void *blob, struct ls_pcie_g4 *pcie) |
| { |
| ft_pcie_rc_layerscape_gen4_fix(blob, pcie); |
| ft_pcie_ep_layerscape_gen4_fix(blob, pcie); |
| } |
| |
| /* Fixup Kernel DT for PCIe */ |
| void ft_pci_setup(void *blob, bd_t *bd) |
| { |
| struct ls_pcie_g4 *pcie; |
| |
| list_for_each_entry(pcie, &ls_pcie_g4_list, list) |
| ft_pcie_layerscape_gen4_setup(blob, pcie); |
| |
| #if defined(CONFIG_FSL_LSCH3) || defined(CONFIG_FSL_LSCH2) |
| fdt_fixup_pcie_ls_gen4(blob); |
| #endif |
| } |
| |
| #else /* !CONFIG_OF_BOARD_SETUP */ |
| void ft_pci_setup(void *blob, bd_t *bd) |
| { |
| } |
| #endif |