| /* |
| * MPC8260 FCC Fast Ethernet |
| * |
| * Copyright (c) 2000 MontaVista Software, Inc. Dan Malek (dmalek@jlc.net) |
| * |
| * (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com> |
| * Marius Groeger <mgroeger@sysgo.de> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| /* |
| * MPC8260 FCC Fast Ethernet |
| * Basic ET HW initialization and packet RX/TX routines |
| * |
| * This code will not perform the IO port configuration. This should be |
| * done in the iop_conf_t structure specific for the board. |
| * |
| * TODO: |
| * add a PHY driver to do the negotiation |
| * reflect negotiation results in FPSMR |
| * look for ways to configure the board specific stuff elsewhere, eg. |
| * config_xxx.h or the board directory |
| */ |
| |
| #include <common.h> |
| #include <console.h> |
| #include <malloc.h> |
| #include <asm/cpm_8260.h> |
| #include <mpc8260.h> |
| #include <command.h> |
| #include <config.h> |
| #include <net.h> |
| |
| #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) |
| #include <miiphy.h> |
| #endif |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #if defined(CONFIG_ETHER_ON_FCC) && defined(CONFIG_CMD_NET) |
| |
| static struct ether_fcc_info_s |
| { |
| int ether_index; |
| int proff_enet; |
| ulong cpm_cr_enet_sblock; |
| ulong cpm_cr_enet_page; |
| ulong cmxfcr_mask; |
| ulong cmxfcr_value; |
| } |
| ether_fcc_info[] = |
| { |
| #ifdef CONFIG_ETHER_ON_FCC1 |
| { |
| 0, |
| PROFF_FCC1, |
| CPM_CR_FCC1_SBLOCK, |
| CPM_CR_FCC1_PAGE, |
| CONFIG_SYS_CMXFCR_MASK1, |
| CONFIG_SYS_CMXFCR_VALUE1 |
| }, |
| #endif |
| |
| #ifdef CONFIG_ETHER_ON_FCC2 |
| { |
| 1, |
| PROFF_FCC2, |
| CPM_CR_FCC2_SBLOCK, |
| CPM_CR_FCC2_PAGE, |
| CONFIG_SYS_CMXFCR_MASK2, |
| CONFIG_SYS_CMXFCR_VALUE2 |
| }, |
| #endif |
| |
| #ifdef CONFIG_ETHER_ON_FCC3 |
| { |
| 2, |
| PROFF_FCC3, |
| CPM_CR_FCC3_SBLOCK, |
| CPM_CR_FCC3_PAGE, |
| CONFIG_SYS_CMXFCR_MASK3, |
| CONFIG_SYS_CMXFCR_VALUE3 |
| }, |
| #endif |
| }; |
| |
| /*---------------------------------------------------------------------*/ |
| |
| /* Maximum input DMA size. Must be a should(?) be a multiple of 4. */ |
| #define PKT_MAXDMA_SIZE 1520 |
| |
| /* The FCC stores dest/src/type, data, and checksum for receive packets. */ |
| #define PKT_MAXBUF_SIZE 1518 |
| #define PKT_MINBUF_SIZE 64 |
| |
| /* Maximum input buffer size. Must be a multiple of 32. */ |
| #define PKT_MAXBLR_SIZE 1536 |
| |
| #define TOUT_LOOP 1000000 |
| |
| #define TX_BUF_CNT 2 |
| #ifdef __GNUC__ |
| static char txbuf[TX_BUF_CNT][PKT_MAXBLR_SIZE] __attribute__ ((aligned(8))); |
| #else |
| #error "txbuf must be 64-bit aligned" |
| #endif |
| |
| static uint rxIdx; /* index of the current RX buffer */ |
| static uint txIdx; /* index of the current TX buffer */ |
| |
| /* |
| * FCC Ethernet Tx and Rx buffer descriptors. |
| * Provide for Double Buffering |
| * Note: PKTBUFSRX is defined in net.h |
| */ |
| |
| typedef volatile struct rtxbd { |
| cbd_t rxbd[PKTBUFSRX]; |
| cbd_t txbd[TX_BUF_CNT]; |
| } RTXBD; |
| |
| /* Good news: the FCC supports external BDs! */ |
| #ifdef __GNUC__ |
| static RTXBD rtx __attribute__ ((aligned(8))); |
| #else |
| #error "rtx must be 64-bit aligned" |
| #endif |
| |
| static int fec_send(struct eth_device *dev, void *packet, int length) |
| { |
| int i; |
| int result = 0; |
| |
| if (length <= 0) { |
| printf("fec: bad packet size: %d\n", length); |
| goto out; |
| } |
| |
| for(i=0; rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) { |
| if (i >= TOUT_LOOP) { |
| puts ("fec: tx buffer not ready\n"); |
| goto out; |
| } |
| } |
| |
| rtx.txbd[txIdx].cbd_bufaddr = (uint)packet; |
| rtx.txbd[txIdx].cbd_datlen = length; |
| rtx.txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST | |
| BD_ENET_TX_WRAP); |
| |
| for(i=0; rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) { |
| if (i >= TOUT_LOOP) { |
| puts ("fec: tx error\n"); |
| goto out; |
| } |
| } |
| |
| #ifdef ET_DEBUG |
| printf("cycles: %d status: %04x\n", i, rtx.txbd[txIdx].cbd_sc); |
| #endif |
| |
| /* return only status bits */ |
| result = rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_STATS; |
| |
| out: |
| return result; |
| } |
| |
| static int fec_recv(struct eth_device* dev) |
| { |
| int length; |
| |
| for (;;) |
| { |
| if (rtx.rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) { |
| length = -1; |
| break; /* nothing received - leave for() loop */ |
| } |
| length = rtx.rxbd[rxIdx].cbd_datlen; |
| |
| if (rtx.rxbd[rxIdx].cbd_sc & 0x003f) { |
| printf("fec: rx error %04x\n", rtx.rxbd[rxIdx].cbd_sc); |
| } |
| else { |
| /* Pass the packet up to the protocol layers. */ |
| net_process_received_packet(net_rx_packets[rxIdx], length - 4); |
| } |
| |
| |
| /* Give the buffer back to the FCC. */ |
| rtx.rxbd[rxIdx].cbd_datlen = 0; |
| |
| /* wrap around buffer index when necessary */ |
| if ((rxIdx + 1) >= PKTBUFSRX) { |
| rtx.rxbd[PKTBUFSRX - 1].cbd_sc = (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY); |
| rxIdx = 0; |
| } |
| else { |
| rtx.rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY; |
| rxIdx++; |
| } |
| } |
| return length; |
| } |
| |
| |
| static int fec_init(struct eth_device* dev, bd_t *bis) |
| { |
| struct ether_fcc_info_s * info = dev->priv; |
| int i; |
| volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; |
| volatile cpm8260_t *cp = &(immr->im_cpm); |
| fcc_enet_t *pram_ptr; |
| unsigned long mem_addr; |
| |
| #if 0 |
| mii_discover_phy(); |
| #endif |
| |
| /* 28.9 - (1-2): ioports have been set up already */ |
| |
| /* 28.9 - (3): connect FCC's tx and rx clocks */ |
| immr->im_cpmux.cmx_uar = 0; |
| immr->im_cpmux.cmx_fcr = (immr->im_cpmux.cmx_fcr & ~info->cmxfcr_mask) | |
| info->cmxfcr_value; |
| |
| /* 28.9 - (4): GFMR: disable tx/rx, CCITT CRC, Mode Ethernet */ |
| immr->im_fcc[info->ether_index].fcc_gfmr = |
| FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32; |
| |
| /* 28.9 - (5): FPSMR: enable full duplex, select CCITT CRC for Ethernet */ |
| immr->im_fcc[info->ether_index].fcc_fpsmr = CONFIG_SYS_FCC_PSMR | FCC_PSMR_ENCRC; |
| |
| /* 28.9 - (6): FDSR: Ethernet Syn */ |
| immr->im_fcc[info->ether_index].fcc_fdsr = 0xD555; |
| |
| /* reset indeces to current rx/tx bd (see eth_send()/eth_rx()) */ |
| rxIdx = 0; |
| txIdx = 0; |
| |
| /* Setup Receiver Buffer Descriptors */ |
| for (i = 0; i < PKTBUFSRX; i++) |
| { |
| rtx.rxbd[i].cbd_sc = BD_ENET_RX_EMPTY; |
| rtx.rxbd[i].cbd_datlen = 0; |
| rtx.rxbd[i].cbd_bufaddr = (uint)net_rx_packets[i]; |
| } |
| rtx.rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP; |
| |
| /* Setup Ethernet Transmitter Buffer Descriptors */ |
| for (i = 0; i < TX_BUF_CNT; i++) |
| { |
| rtx.txbd[i].cbd_sc = (BD_ENET_TX_PAD | BD_ENET_TX_LAST | BD_ENET_TX_TC); |
| rtx.txbd[i].cbd_datlen = 0; |
| rtx.txbd[i].cbd_bufaddr = (uint)&txbuf[i][0]; |
| } |
| rtx.txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP; |
| |
| /* 28.9 - (7): initialise parameter ram */ |
| pram_ptr = (fcc_enet_t *)&(immr->im_dprambase[info->proff_enet]); |
| |
| /* clear whole structure to make sure all reserved fields are zero */ |
| memset((void*)pram_ptr, 0, sizeof(fcc_enet_t)); |
| |
| /* |
| * common Parameter RAM area |
| * |
| * Allocate space in the reserved FCC area of DPRAM for the |
| * internal buffers. No one uses this space (yet), so we |
| * can do this. Later, we will add resource management for |
| * this area. |
| */ |
| mem_addr = CPM_FCC_SPECIAL_BASE + ((info->ether_index) * 64); |
| pram_ptr->fen_genfcc.fcc_riptr = mem_addr; |
| pram_ptr->fen_genfcc.fcc_tiptr = mem_addr+32; |
| /* |
| * Set maximum bytes per receive buffer. |
| * It must be a multiple of 32. |
| */ |
| pram_ptr->fen_genfcc.fcc_mrblr = PKT_MAXBLR_SIZE; |
| pram_ptr->fen_genfcc.fcc_rstate = (CPMFCR_GBL | CPMFCR_EB | |
| CONFIG_SYS_CPMFCR_RAMTYPE) << 24; |
| pram_ptr->fen_genfcc.fcc_rbase = (unsigned int)(&rtx.rxbd[rxIdx]); |
| pram_ptr->fen_genfcc.fcc_tstate = (CPMFCR_GBL | CPMFCR_EB | |
| CONFIG_SYS_CPMFCR_RAMTYPE) << 24; |
| pram_ptr->fen_genfcc.fcc_tbase = (unsigned int)(&rtx.txbd[txIdx]); |
| |
| /* protocol-specific area */ |
| pram_ptr->fen_cmask = 0xdebb20e3; /* CRC mask */ |
| pram_ptr->fen_cpres = 0xffffffff; /* CRC preset */ |
| pram_ptr->fen_retlim = 15; /* Retry limit threshold */ |
| pram_ptr->fen_mflr = PKT_MAXBUF_SIZE; /* maximum frame length register */ |
| /* |
| * Set Ethernet station address. |
| * |
| * This is supplied in the board information structure, so we |
| * copy that into the controller. |
| * So, far we have only been given one Ethernet address. We make |
| * it unique by setting a few bits in the upper byte of the |
| * non-static part of the address. |
| */ |
| #define ea eth_get_ethaddr() |
| pram_ptr->fen_paddrh = (ea[5] << 8) + ea[4]; |
| pram_ptr->fen_paddrm = (ea[3] << 8) + ea[2]; |
| pram_ptr->fen_paddrl = (ea[1] << 8) + ea[0]; |
| #undef ea |
| pram_ptr->fen_minflr = PKT_MINBUF_SIZE; /* minimum frame length register */ |
| /* pad pointer. use tiptr since we don't need a specific padding char */ |
| pram_ptr->fen_padptr = pram_ptr->fen_genfcc.fcc_tiptr; |
| pram_ptr->fen_maxd1 = PKT_MAXDMA_SIZE; /* maximum DMA1 length */ |
| pram_ptr->fen_maxd2 = PKT_MAXDMA_SIZE; /* maximum DMA2 length */ |
| pram_ptr->fen_rfthr = 1; |
| pram_ptr->fen_rfcnt = 1; |
| #if 0 |
| printf("pram_ptr->fen_genfcc.fcc_rbase %08lx\n", |
| pram_ptr->fen_genfcc.fcc_rbase); |
| printf("pram_ptr->fen_genfcc.fcc_tbase %08lx\n", |
| pram_ptr->fen_genfcc.fcc_tbase); |
| #endif |
| |
| /* 28.9 - (8): clear out events in FCCE */ |
| immr->im_fcc[info->ether_index].fcc_fcce = ~0x0; |
| |
| /* 28.9 - (9): FCCM: mask all events */ |
| immr->im_fcc[info->ether_index].fcc_fccm = 0; |
| |
| /* 28.9 - (10-12): we don't use ethernet interrupts */ |
| |
| /* 28.9 - (13) |
| * |
| * Let's re-initialize the channel now. We have to do it later |
| * than the manual describes because we have just now finished |
| * the BD initialization. |
| */ |
| cp->cp_cpcr = mk_cr_cmd(info->cpm_cr_enet_page, |
| info->cpm_cr_enet_sblock, |
| 0x0c, |
| CPM_CR_INIT_TRX) | CPM_CR_FLG; |
| do { |
| __asm__ __volatile__ ("eieio"); |
| } while (cp->cp_cpcr & CPM_CR_FLG); |
| |
| /* 28.9 - (14): enable tx/rx in gfmr */ |
| immr->im_fcc[info->ether_index].fcc_gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR; |
| |
| return 1; |
| } |
| |
| static void fec_halt(struct eth_device* dev) |
| { |
| struct ether_fcc_info_s * info = dev->priv; |
| volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; |
| |
| /* write GFMR: disable tx/rx */ |
| immr->im_fcc[info->ether_index].fcc_gfmr &= |
| ~(FCC_GFMR_ENT | FCC_GFMR_ENR); |
| } |
| |
| int fec_initialize(bd_t *bis) |
| { |
| struct eth_device* dev; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(ether_fcc_info); i++) |
| { |
| dev = (struct eth_device*) malloc(sizeof *dev); |
| memset(dev, 0, sizeof *dev); |
| |
| sprintf(dev->name, "FCC%d", |
| ether_fcc_info[i].ether_index + 1); |
| dev->priv = ðer_fcc_info[i]; |
| dev->init = fec_init; |
| dev->halt = fec_halt; |
| dev->send = fec_send; |
| dev->recv = fec_recv; |
| |
| eth_register(dev); |
| |
| #if (defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) \ |
| && defined(CONFIG_BITBANGMII) |
| miiphy_register(dev->name, |
| bb_miiphy_read, bb_miiphy_write); |
| #endif |
| } |
| |
| return 1; |
| } |
| |
| #ifdef CONFIG_ETHER_LOOPBACK_TEST |
| |
| #define ELBT_BUFSZ 1024 /* must be multiple of 32 */ |
| |
| #define ELBT_CRCSZ 4 |
| |
| #define ELBT_NRXBD 4 /* must be at least 2 */ |
| #define ELBT_NTXBD 4 |
| |
| #define ELBT_MAXRXERR 32 |
| #define ELBT_MAXTXERR 32 |
| |
| #define ELBT_CLSWAIT 1000 /* msec to wait for further input frames */ |
| |
| typedef |
| struct { |
| uint off; |
| char *lab; |
| } |
| elbt_prdesc; |
| |
| typedef |
| struct { |
| uint _l, _f, m, bc, mc, lg, no, sh, cr, ov, cl; |
| uint badsrc, badtyp, badlen, badbit; |
| } |
| elbt_rxeacc; |
| |
| static elbt_prdesc rxeacc_descs[] = { |
| { offsetof(elbt_rxeacc, _l), "Not Last in Frame" }, |
| { offsetof(elbt_rxeacc, _f), "Not First in Frame" }, |
| { offsetof(elbt_rxeacc, m), "Address Miss" }, |
| { offsetof(elbt_rxeacc, bc), "Broadcast Address" }, |
| { offsetof(elbt_rxeacc, mc), "Multicast Address" }, |
| { offsetof(elbt_rxeacc, lg), "Frame Length Violation"}, |
| { offsetof(elbt_rxeacc, no), "Non-Octet Alignment" }, |
| { offsetof(elbt_rxeacc, sh), "Short Frame" }, |
| { offsetof(elbt_rxeacc, cr), "CRC Error" }, |
| { offsetof(elbt_rxeacc, ov), "Overrun" }, |
| { offsetof(elbt_rxeacc, cl), "Collision" }, |
| { offsetof(elbt_rxeacc, badsrc), "Bad Src Address" }, |
| { offsetof(elbt_rxeacc, badtyp), "Bad Frame Type" }, |
| { offsetof(elbt_rxeacc, badlen), "Bad Frame Length" }, |
| { offsetof(elbt_rxeacc, badbit), "Data Compare Errors" }, |
| }; |
| static int rxeacc_ndesc = ARRAY_SIZE(rxeacc_descs); |
| |
| typedef |
| struct { |
| uint def, hb, lc, rl, rc, un, csl; |
| } |
| elbt_txeacc; |
| |
| static elbt_prdesc txeacc_descs[] = { |
| { offsetof(elbt_txeacc, def), "Defer Indication" }, |
| { offsetof(elbt_txeacc, hb), "Heartbeat" }, |
| { offsetof(elbt_txeacc, lc), "Late Collision" }, |
| { offsetof(elbt_txeacc, rl), "Retransmission Limit" }, |
| { offsetof(elbt_txeacc, rc), "Retry Count" }, |
| { offsetof(elbt_txeacc, un), "Underrun" }, |
| { offsetof(elbt_txeacc, csl), "Carrier Sense Lost" }, |
| }; |
| static int txeacc_ndesc = ARRAY_SIZE(txeacc_descs); |
| |
| typedef |
| struct { |
| uchar rxbufs[ELBT_NRXBD][ELBT_BUFSZ]; |
| uchar txbufs[ELBT_NTXBD][ELBT_BUFSZ]; |
| cbd_t rxbd[ELBT_NRXBD]; |
| cbd_t txbd[ELBT_NTXBD]; |
| enum { Idle, Running, Closing, Closed } state; |
| int proff, page, sblock; |
| uint clstime, nsent, ntxerr, nrcvd, nrxerr; |
| ushort rxerrs[ELBT_MAXRXERR], txerrs[ELBT_MAXTXERR]; |
| elbt_rxeacc rxeacc; |
| elbt_txeacc txeacc; |
| } __attribute__ ((aligned(8))) |
| elbt_chan; |
| |
| static uchar patbytes[ELBT_NTXBD] = { |
| 0xff, 0xaa, 0x55, 0x00 |
| }; |
| static uint patwords[ELBT_NTXBD] = { |
| 0xffffffff, 0xaaaaaaaa, 0x55555555, 0x00000000 |
| }; |
| |
| #ifdef __GNUC__ |
| static elbt_chan elbt_chans[3] __attribute__ ((aligned(8))); |
| #else |
| #error "elbt_chans must be 64-bit aligned" |
| #endif |
| |
| #define CPM_CR_GRACEFUL_STOP_TX ((ushort)0x0005) |
| |
| static elbt_prdesc epram_descs[] = { |
| { offsetof(fcc_enet_t, fen_crcec), "CRC Errors" }, |
| { offsetof(fcc_enet_t, fen_alec), "Alignment Errors" }, |
| { offsetof(fcc_enet_t, fen_disfc), "Discarded Frames" }, |
| { offsetof(fcc_enet_t, fen_octc), "Octets" }, |
| { offsetof(fcc_enet_t, fen_colc), "Collisions" }, |
| { offsetof(fcc_enet_t, fen_broc), "Broadcast Frames" }, |
| { offsetof(fcc_enet_t, fen_mulc), "Multicast Frames" }, |
| { offsetof(fcc_enet_t, fen_uspc), "Undersize Frames" }, |
| { offsetof(fcc_enet_t, fen_frgc), "Fragments" }, |
| { offsetof(fcc_enet_t, fen_ospc), "Oversize Frames" }, |
| { offsetof(fcc_enet_t, fen_jbrc), "Jabbers" }, |
| { offsetof(fcc_enet_t, fen_p64c), "64 Octet Frames" }, |
| { offsetof(fcc_enet_t, fen_p65c), "65-127 Octet Frames" }, |
| { offsetof(fcc_enet_t, fen_p128c), "128-255 Octet Frames" }, |
| { offsetof(fcc_enet_t, fen_p256c), "256-511 Octet Frames" }, |
| { offsetof(fcc_enet_t, fen_p512c), "512-1023 Octet Frames" }, |
| { offsetof(fcc_enet_t, fen_p1024c), "1024-1518 Octet Frames"}, |
| }; |
| static int epram_ndesc = ARRAY_SIZE(epram_descs); |
| |
| /* |
| * given an elbt_prdesc array and an array of base addresses, print |
| * each prdesc down the screen with the values fetched from each |
| * base address across the screen |
| */ |
| static void |
| print_desc (elbt_prdesc descs[], int ndesc, uchar *bases[], int nbase) |
| { |
| elbt_prdesc *dp = descs, *edp = dp + ndesc; |
| int i; |
| |
| printf ("%32s", ""); |
| |
| for (i = 0; i < nbase; i++) |
| printf (" Channel %d", i); |
| |
| putc ('\n'); |
| |
| while (dp < edp) { |
| |
| printf ("%-32s", dp->lab); |
| |
| for (i = 0; i < nbase; i++) { |
| uint val = *(uint *)(bases[i] + dp->off); |
| |
| printf (" %10u", val); |
| } |
| |
| putc ('\n'); |
| |
| dp++; |
| } |
| } |
| |
| /* |
| * return number of bits that are set in a value; value contains |
| * nbits (right-justified) bits. |
| */ |
| static uint __inline__ |
| nbs (uint value, uint nbits) |
| { |
| uint cnt = 0; |
| #if 1 |
| uint pos = sizeof (uint) * 8; |
| |
| __asm__ __volatile__ ("\ |
| mtctr %2\n\ |
| 1: rlwnm. %2,%1,%4,31,31\n\ |
| beq 2f\n\ |
| addi %0,%0,1\n\ |
| 2: subi %4,%4,1\n\ |
| bdnz 1b" |
| : "=r"(cnt) |
| : "r"(value), "r"(nbits), "r"(cnt), "r"(pos) |
| : "ctr", "cc" ); |
| #else |
| uint mask = 1; |
| |
| do { |
| if (value & mask) |
| cnt++; |
| mask <<= 1; |
| } while (--nbits); |
| #endif |
| |
| return (cnt); |
| } |
| |
| static ulong |
| badbits (uchar *bp, int n, ulong pat) |
| { |
| ulong *lp, cnt = 0; |
| int nl; |
| |
| while (n > 0 && ((ulong)bp & (sizeof (ulong) - 1)) != 0) { |
| uchar diff; |
| |
| diff = *bp++ ^ (uchar)pat; |
| |
| if (diff) |
| cnt += nbs ((ulong)diff, 8); |
| |
| n--; |
| } |
| |
| lp = (ulong *)bp; |
| nl = n / sizeof (ulong); |
| n -= nl * sizeof (ulong); |
| |
| while (nl > 0) { |
| ulong diff; |
| |
| diff = *lp++ ^ pat; |
| |
| if (diff) |
| cnt += nbs (diff, 32); |
| |
| nl--; |
| } |
| |
| bp = (uchar *)lp; |
| |
| while (n > 0) { |
| uchar diff; |
| |
| diff = *bp++ ^ (uchar)pat; |
| |
| if (diff) |
| cnt += nbs ((ulong)diff, 8); |
| |
| n--; |
| } |
| |
| return (cnt); |
| } |
| |
| static inline unsigned short |
| swap16 (unsigned short x) |
| { |
| return (((x & 0xff) << 8) | ((x & 0xff00) >> 8)); |
| } |
| |
| /* broadcast is not an error - we send them like that */ |
| #define BD_ENET_RX_ERRS (BD_ENET_RX_STATS & ~BD_ENET_RX_BC) |
| |
| void |
| eth_loopback_test (void) |
| { |
| volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; |
| volatile cpm8260_t *cp = &(immr->im_cpm); |
| int c, nclosed; |
| ulong runtime, nmsec; |
| uchar *bases[3]; |
| |
| puts ("FCC Ethernet External loopback test\n"); |
| |
| eth_getenv_enetaddr("ethaddr", net_ethaddr); |
| |
| /* |
| * global initialisations for all FCC channels |
| */ |
| |
| /* 28.9 - (1-2): ioports have been set up already */ |
| |
| #if defined(CONFIG_SACSng) |
| /* |
| * Attention: this is board-specific |
| * 1, FCC2 |
| */ |
| # define FCC_START_LOOP 1 |
| # define FCC_END_LOOP 1 |
| |
| /* |
| * Attention: this is board-specific |
| * - FCC2 Rx-CLK is CLK13 |
| * - FCC2 Tx-CLK is CLK14 |
| */ |
| |
| /* 28.9 - (3): connect FCC's tx and rx clocks */ |
| immr->im_cpmux.cmx_uar = 0; |
| immr->im_cpmux.cmx_fcr = CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14; |
| #else |
| #error "eth_loopback_test not supported on your board" |
| #endif |
| |
| puts ("Initialise FCC channels:"); |
| |
| for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) { |
| elbt_chan *ecp = &elbt_chans[c]; |
| volatile fcc_t *fcp = &immr->im_fcc[c]; |
| volatile fcc_enet_t *fpp; |
| int i; |
| ulong addr; |
| |
| /* |
| * initialise channel data |
| */ |
| |
| printf (" %d", c); |
| |
| memset ((void *)ecp, 0, sizeof (*ecp)); |
| |
| ecp->state = Idle; |
| |
| switch (c) { |
| |
| case 0: /* FCC1 */ |
| ecp->proff = PROFF_FCC1; |
| ecp->page = CPM_CR_FCC1_PAGE; |
| ecp->sblock = CPM_CR_FCC1_SBLOCK; |
| break; |
| |
| case 1: /* FCC2 */ |
| ecp->proff = PROFF_FCC2; |
| ecp->page = CPM_CR_FCC2_PAGE; |
| ecp->sblock = CPM_CR_FCC2_SBLOCK; |
| break; |
| |
| case 2: /* FCC3 */ |
| ecp->proff = PROFF_FCC3; |
| ecp->page = CPM_CR_FCC3_PAGE; |
| ecp->sblock = CPM_CR_FCC3_SBLOCK; |
| break; |
| } |
| |
| /* |
| * set up tx buffers and bds |
| */ |
| |
| for (i = 0; i < ELBT_NTXBD; i++) { |
| cbd_t *bdp = &ecp->txbd[i]; |
| uchar *bp = &ecp->txbufs[i][0]; |
| |
| bdp->cbd_bufaddr = (uint)bp; |
| /* room for crc */ |
| bdp->cbd_datlen = ELBT_BUFSZ - ELBT_CRCSZ; |
| bdp->cbd_sc = BD_ENET_TX_READY | BD_ENET_TX_PAD | \ |
| BD_ENET_TX_LAST | BD_ENET_TX_TC; |
| |
| memset((void *)bp, patbytes[i], ELBT_BUFSZ); |
| net_set_ether(bp, net_bcast_ethaddr, 0x8000); |
| } |
| ecp->txbd[ELBT_NTXBD - 1].cbd_sc |= BD_ENET_TX_WRAP; |
| |
| /* |
| * set up rx buffers and bds |
| */ |
| |
| for (i = 0; i < ELBT_NRXBD; i++) { |
| cbd_t *bdp = &ecp->rxbd[i]; |
| uchar *bp = &ecp->rxbufs[i][0]; |
| |
| bdp->cbd_bufaddr = (uint)bp; |
| bdp->cbd_datlen = 0; |
| bdp->cbd_sc = BD_ENET_RX_EMPTY; |
| |
| memset ((void *)bp, 0, ELBT_BUFSZ); |
| } |
| ecp->rxbd[ELBT_NRXBD - 1].cbd_sc |= BD_ENET_RX_WRAP; |
| |
| /* |
| * set up the FCC channel hardware |
| */ |
| |
| /* 28.9 - (4): GFMR: disable tx/rx, CCITT CRC, Mode Ethernet */ |
| fcp->fcc_gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32; |
| |
| /* 28.9 - (5): FPSMR: fd, enet CRC, Promis, RMON, Rx SHort */ |
| fcp->fcc_fpsmr = FCC_PSMR_FDE | FCC_PSMR_LPB | \ |
| FCC_PSMR_ENCRC | FCC_PSMR_PRO | \ |
| FCC_PSMR_MON | FCC_PSMR_RSH; |
| |
| /* 28.9 - (6): FDSR: Ethernet Syn */ |
| fcp->fcc_fdsr = 0xD555; |
| |
| /* 29.9 - (7): initialise parameter ram */ |
| fpp = (fcc_enet_t *)&(immr->im_dprambase[ecp->proff]); |
| |
| /* clear whole struct to make sure all resv fields are zero */ |
| memset ((void *)fpp, 0, sizeof (fcc_enet_t)); |
| |
| /* |
| * common Parameter RAM area |
| * |
| * Allocate space in the reserved FCC area of DPRAM for the |
| * internal buffers. No one uses this space (yet), so we |
| * can do this. Later, we will add resource management for |
| * this area. |
| */ |
| addr = CPM_FCC_SPECIAL_BASE + (c * 64); |
| fpp->fen_genfcc.fcc_riptr = addr; |
| fpp->fen_genfcc.fcc_tiptr = addr + 32; |
| |
| /* |
| * Set maximum bytes per receive buffer. |
| * It must be a multiple of 32. |
| * buffers are in 60x bus memory. |
| */ |
| fpp->fen_genfcc.fcc_mrblr = PKT_MAXBLR_SIZE; |
| fpp->fen_genfcc.fcc_rstate = (CPMFCR_GBL | CPMFCR_EB) << 24; |
| fpp->fen_genfcc.fcc_rbase = (unsigned int)(&ecp->rxbd[0]); |
| fpp->fen_genfcc.fcc_tstate = (CPMFCR_GBL | CPMFCR_EB) << 24; |
| fpp->fen_genfcc.fcc_tbase = (unsigned int)(&ecp->txbd[0]); |
| |
| /* protocol-specific area */ |
| fpp->fen_cmask = 0xdebb20e3; /* CRC mask */ |
| fpp->fen_cpres = 0xffffffff; /* CRC preset */ |
| fpp->fen_retlim = 15; /* Retry limit threshold */ |
| fpp->fen_mflr = PKT_MAXBUF_SIZE;/* max frame length register */ |
| |
| /* |
| * Set Ethernet station address. |
| * |
| * This is supplied in the board information structure, so we |
| * copy that into the controller. |
| * So, far we have only been given one Ethernet address. We use |
| * the same address for all channels |
| */ |
| fpp->fen_paddrh = (net_ethaddr[5] << 8) + net_ethaddr[4]; |
| fpp->fen_paddrm = (net_ethaddr[3] << 8) + net_ethaddr[2]; |
| fpp->fen_paddrl = (net_ethaddr[1] << 8) + net_ethaddr[0]; |
| |
| fpp->fen_minflr = PKT_MINBUF_SIZE; /* min frame len register */ |
| /* |
| * pad pointer. use tiptr since we don't need |
| * a specific padding char |
| */ |
| fpp->fen_padptr = fpp->fen_genfcc.fcc_tiptr; |
| fpp->fen_maxd1 = PKT_MAXDMA_SIZE; /* max DMA1 length */ |
| fpp->fen_maxd2 = PKT_MAXDMA_SIZE; /* max DMA2 length */ |
| fpp->fen_rfthr = 1; |
| fpp->fen_rfcnt = 1; |
| |
| /* 28.9 - (8): clear out events in FCCE */ |
| fcp->fcc_fcce = ~0x0; |
| |
| /* 28.9 - (9): FCCM: mask all events */ |
| fcp->fcc_fccm = 0; |
| |
| /* 28.9 - (10-12): we don't use ethernet interrupts */ |
| |
| /* 28.9 - (13) |
| * |
| * Let's re-initialize the channel now. We have to do it later |
| * than the manual describes because we have just now finished |
| * the BD initialization. |
| */ |
| cp->cp_cpcr = mk_cr_cmd (ecp->page, ecp->sblock, \ |
| 0x0c, CPM_CR_INIT_TRX) | CPM_CR_FLG; |
| do { |
| __asm__ __volatile__ ("eieio"); |
| } while (cp->cp_cpcr & CPM_CR_FLG); |
| } |
| |
| puts (" done\nStarting test... (Ctrl-C to Finish)\n"); |
| |
| /* |
| * Note: don't want serial output from here until the end of the |
| * test - the delays would probably stuff things up. |
| */ |
| |
| clear_ctrlc (); |
| runtime = get_timer (0); |
| |
| do { |
| nclosed = 0; |
| |
| for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) { |
| volatile fcc_t *fcp = &immr->im_fcc[c]; |
| elbt_chan *ecp = &elbt_chans[c]; |
| int i; |
| |
| switch (ecp->state) { |
| |
| case Idle: |
| /* |
| * set the channel Running ... |
| */ |
| |
| /* 28.9 - (14): enable tx/rx in gfmr */ |
| fcp->fcc_gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR; |
| |
| ecp->state = Running; |
| break; |
| |
| case Running: |
| /* |
| * (while Running only) check for |
| * termination of the test |
| */ |
| |
| (void)ctrlc (); |
| |
| if (had_ctrlc ()) { |
| /* |
| * initiate a "graceful stop transmit" |
| * on the channel |
| */ |
| cp->cp_cpcr = mk_cr_cmd (ecp->page, \ |
| ecp->sblock, 0x0c, \ |
| CPM_CR_GRACEFUL_STOP_TX) | \ |
| CPM_CR_FLG; |
| do { |
| __asm__ __volatile__ ("eieio"); |
| } while (cp->cp_cpcr & CPM_CR_FLG); |
| |
| ecp->clstime = get_timer (0); |
| ecp->state = Closing; |
| } |
| /* fall through ... */ |
| |
| case Closing: |
| /* |
| * (while Running or Closing) poll the channel: |
| * - check for any non-READY tx buffers and |
| * make them ready |
| * - check for any non-EMPTY rx buffers and |
| * check that they were received correctly, |
| * adjust counters etc, then make empty |
| */ |
| |
| for (i = 0; i < ELBT_NTXBD; i++) { |
| cbd_t *bdp = &ecp->txbd[i]; |
| ushort sc = bdp->cbd_sc; |
| |
| if ((sc & BD_ENET_TX_READY) != 0) |
| continue; |
| |
| /* |
| * this frame has finished |
| * transmitting |
| */ |
| ecp->nsent++; |
| |
| if (sc & BD_ENET_TX_STATS) { |
| ulong n; |
| |
| /* |
| * we had an error on |
| * the transmission |
| */ |
| n = ecp->ntxerr++; |
| if (n < ELBT_MAXTXERR) |
| ecp->txerrs[n] = sc; |
| |
| if (sc & BD_ENET_TX_DEF) |
| ecp->txeacc.def++; |
| if (sc & BD_ENET_TX_HB) |
| ecp->txeacc.hb++; |
| if (sc & BD_ENET_TX_LC) |
| ecp->txeacc.lc++; |
| if (sc & BD_ENET_TX_RL) |
| ecp->txeacc.rl++; |
| if (sc & BD_ENET_TX_RCMASK) |
| ecp->txeacc.rc++; |
| if (sc & BD_ENET_TX_UN) |
| ecp->txeacc.un++; |
| if (sc & BD_ENET_TX_CSL) |
| ecp->txeacc.csl++; |
| |
| bdp->cbd_sc &= \ |
| ~BD_ENET_TX_STATS; |
| } |
| |
| if (ecp->state == Closing) |
| ecp->clstime = get_timer (0); |
| |
| /* make it ready again */ |
| bdp->cbd_sc |= BD_ENET_TX_READY; |
| } |
| |
| for (i = 0; i < ELBT_NRXBD; i++) { |
| cbd_t *bdp = &ecp->rxbd[i]; |
| ushort sc = bdp->cbd_sc, mask; |
| |
| if ((sc & BD_ENET_RX_EMPTY) != 0) |
| continue; |
| |
| /* we have a new frame in this buffer */ |
| ecp->nrcvd++; |
| |
| mask = BD_ENET_RX_LAST|BD_ENET_RX_FIRST; |
| if ((sc & mask) != mask) { |
| /* somethings wrong here ... */ |
| if (!(sc & BD_ENET_RX_LAST)) |
| ecp->rxeacc._l++; |
| if (!(sc & BD_ENET_RX_FIRST)) |
| ecp->rxeacc._f++; |
| } |
| |
| if (sc & BD_ENET_RX_ERRS) { |
| ulong n; |
| |
| /* |
| * we had some sort of error |
| * on the frame |
| */ |
| n = ecp->nrxerr++; |
| if (n < ELBT_MAXRXERR) |
| ecp->rxerrs[n] = sc; |
| |
| if (sc & BD_ENET_RX_MISS) |
| ecp->rxeacc.m++; |
| if (sc & BD_ENET_RX_BC) |
| ecp->rxeacc.bc++; |
| if (sc & BD_ENET_RX_MC) |
| ecp->rxeacc.mc++; |
| if (sc & BD_ENET_RX_LG) |
| ecp->rxeacc.lg++; |
| if (sc & BD_ENET_RX_NO) |
| ecp->rxeacc.no++; |
| if (sc & BD_ENET_RX_SH) |
| ecp->rxeacc.sh++; |
| if (sc & BD_ENET_RX_CR) |
| ecp->rxeacc.cr++; |
| if (sc & BD_ENET_RX_OV) |
| ecp->rxeacc.ov++; |
| if (sc & BD_ENET_RX_CL) |
| ecp->rxeacc.cl++; |
| |
| bdp->cbd_sc &= \ |
| ~BD_ENET_RX_ERRS; |
| } |
| else { |
| ushort datlen = bdp->cbd_datlen; |
| struct ethernet_hdr *ehp; |
| ushort prot; |
| int ours, tb, n, nbytes; |
| |
| ehp = (struct ethernet_hdr *) \ |
| &ecp->rxbufs[i][0]; |
| |
| ours = memcmp (ehp->et_src, \ |
| net_ethaddr, 6); |
| |
| prot = swap16 (ehp->et_protlen); |
| tb = prot & 0x8000; |
| n = prot & 0x7fff; |
| |
| nbytes = ELBT_BUFSZ - |
| ETHER_HDR_SIZE - |
| ELBT_CRCSZ; |
| |
| /* check the frame is correct */ |
| if (datlen != ELBT_BUFSZ) |
| ecp->rxeacc.badlen++; |
| else if (!ours) |
| ecp->rxeacc.badsrc++; |
| else if (!tb || n >= ELBT_NTXBD) |
| ecp->rxeacc.badtyp++; |
| else { |
| ulong patword = \ |
| patwords[n]; |
| uint nbb; |
| |
| nbb = badbits( |
| ((uchar *)&ehp) + |
| ETHER_HDR_SIZE, |
| nbytes, patword); |
| |
| ecp->rxeacc.badbit += \ |
| nbb; |
| } |
| } |
| |
| if (ecp->state == Closing) |
| ecp->clstime = get_timer (0); |
| |
| /* make it empty again */ |
| bdp->cbd_sc |= BD_ENET_RX_EMPTY; |
| } |
| |
| if (ecp->state != Closing) |
| break; |
| |
| /* |
| * (while Closing) check to see if |
| * waited long enough |
| */ |
| |
| if (get_timer (ecp->clstime) >= ELBT_CLSWAIT) { |
| /* write GFMR: disable tx/rx */ |
| fcp->fcc_gfmr &= \ |
| ~(FCC_GFMR_ENT | FCC_GFMR_ENR); |
| ecp->state = Closed; |
| } |
| |
| break; |
| |
| case Closed: |
| nclosed++; |
| break; |
| } |
| } |
| |
| } while (nclosed < (FCC_END_LOOP - FCC_START_LOOP + 1)); |
| |
| runtime = get_timer (runtime); |
| if (runtime <= ELBT_CLSWAIT) { |
| printf ("Whoops! somehow elapsed time (%ld) is wrong (<= %d)\n", |
| runtime, ELBT_CLSWAIT); |
| return; |
| } |
| nmsec = runtime - ELBT_CLSWAIT; |
| |
| printf ("Test Finished in %ldms (plus %dms close wait period)!\n\n", |
| nmsec, ELBT_CLSWAIT); |
| |
| /* |
| * now print stats |
| */ |
| |
| for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) { |
| elbt_chan *ecp = &elbt_chans[c]; |
| uint rxpps, txpps, nerr; |
| |
| rxpps = (ecp->nrcvd * 1000) / nmsec; |
| txpps = (ecp->nsent * 1000) / nmsec; |
| |
| printf ("Channel %d: %d rcvd (%d pps, %d rxerrs), " |
| "%d sent (%d pps, %d txerrs)\n\n", c, |
| ecp->nrcvd, rxpps, ecp->nrxerr, |
| ecp->nsent, txpps, ecp->ntxerr); |
| |
| if ((nerr = ecp->nrxerr) > 0) { |
| ulong i; |
| |
| printf ("\tFirst %d rx errs:", nerr); |
| for (i = 0; i < nerr; i++) |
| printf (" %04x", ecp->rxerrs[i]); |
| putc ('\n'); |
| } |
| |
| if ((nerr = ecp->ntxerr) > 0) { |
| ulong i; |
| |
| printf ("\tFirst %d tx errs:", nerr); |
| for (i = 0; i < nerr; i++) |
| printf (" %04x", ecp->txerrs[i]); |
| putc ('\n'); |
| } |
| } |
| |
| puts ("Receive Error Counts:\n"); |
| for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) |
| bases[c] = (uchar *)&elbt_chans[c].rxeacc; |
| print_desc (rxeacc_descs, rxeacc_ndesc, bases, 3); |
| |
| puts ("\nTransmit Error Counts:\n"); |
| for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) |
| bases[c] = (uchar *)&elbt_chans[c].txeacc; |
| print_desc (txeacc_descs, txeacc_ndesc, bases, 3); |
| |
| puts ("\nRMON(-like) Counters:\n"); |
| for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) |
| bases[c] = (uchar *)&immr->im_dprambase[elbt_chans[c].proff]; |
| print_desc (epram_descs, epram_ndesc, bases, 3); |
| } |
| |
| #endif /* CONFIG_ETHER_LOOPBACK_TEST */ |
| |
| #endif |