| /* |
| * EMIF programming |
| * |
| * (C) Copyright 2010 |
| * Texas Instruments, <www.ti.com> |
| * |
| * Aneesh V <aneesh@ti.com> for OMAP4 |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <asm/emif.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/utils.h> |
| |
| #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS |
| #define print_timing_reg(reg) debug(#reg" - 0x%08x\n", (reg)) |
| static u32 *const T_num = (u32 *)OMAP_SRAM_SCRATCH_EMIF_T_NUM; |
| static u32 *const T_den = (u32 *)OMAP_SRAM_SCRATCH_EMIF_T_DEN; |
| #endif |
| |
| #ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS |
| /* Base AC Timing values specified by JESD209-2 for 532MHz operation */ |
| static const struct lpddr2_ac_timings timings_jedec_532_mhz = { |
| .max_freq = 532000000, |
| .RL = 8, |
| .tRPab = 21, |
| .tRCD = 18, |
| .tWR = 15, |
| .tRASmin = 42, |
| .tRRD = 10, |
| .tWTRx2 = 15, |
| .tXSR = 140, |
| .tXPx2 = 15, |
| .tRFCab = 130, |
| .tRTPx2 = 15, |
| .tCKE = 3, |
| .tCKESR = 15, |
| .tZQCS = 90, |
| .tZQCL = 360, |
| .tZQINIT = 1000, |
| .tDQSCKMAXx2 = 11, |
| .tRASmax = 70, |
| .tFAW = 50 |
| }; |
| |
| /* |
| * Min tCK values specified by JESD209-2 |
| * Min tCK specifies the minimum duration of some AC timing parameters in terms |
| * of the number of cycles. If the calculated number of cycles based on the |
| * absolute time value is less than the min tCK value, min tCK value should |
| * be used instead. This typically happens at low frequencies. |
| */ |
| static const struct lpddr2_min_tck min_tck_jedec = { |
| .tRL = 3, |
| .tRP_AB = 3, |
| .tRCD = 3, |
| .tWR = 3, |
| .tRAS_MIN = 3, |
| .tRRD = 2, |
| .tWTR = 2, |
| .tXP = 2, |
| .tRTP = 2, |
| .tCKE = 3, |
| .tCKESR = 3, |
| .tFAW = 8 |
| }; |
| |
| static const struct lpddr2_ac_timings const* |
| jedec_ac_timings[MAX_NUM_SPEEDBINS] = { |
| &timings_jedec_532_mhz |
| }; |
| |
| static const struct lpddr2_device_timings jedec_default_timings = { |
| .ac_timings = jedec_ac_timings, |
| .min_tck = &min_tck_jedec |
| }; |
| |
| void emif_get_device_timings(u32 emif_nr, |
| const struct lpddr2_device_timings **cs0_device_timings, |
| const struct lpddr2_device_timings **cs1_device_timings) |
| { |
| /* Assume Identical devices on EMIF1 & EMIF2 */ |
| *cs0_device_timings = &jedec_default_timings; |
| *cs1_device_timings = NULL; |
| } |
| #endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */ |