dts/upstream/src/arm64/mediatek/mt8195-demo.dts - filogic/uboot - Gitiles

 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
 /*
  * Copyright (C) 2022 BayLibre, SAS.
  * Author: Fabien Parent <fparent@baylibre.com>
  */
 /dts-v1/;

 #include "mt8195.dtsi"
 #include "mt6359.dtsi"

 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
 #include <dt-bindings/regulator/mediatek,mt6360-regulator.h>

 / {
 	model = "MediaTek MT8195 demo board";
 	compatible = "mediatek,mt8195-demo", "mediatek,mt8195";

 	aliases {
 		serial0 = &uart0;
 	};

 	chosen {
 		stdout-path = "serial0:921600n8";
 	};

 	firmware {
 		optee {
 			compatible = "linaro,optee-tz";
 			method = "smc";
 		};
 	};

 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_keys_pins>;

 		key-0 {
 			gpios = <&pio 106 GPIO_ACTIVE_LOW>;
 			label = "volume_up";
 			linux,code = <KEY_VOLUMEUP>;
 			wakeup-source;
 			debounce-interval = <15>;
 		};
 	};

 	memory@40000000 {
 		device_type = "memory";
 		reg = <0 0x40000000 0x2 0x00000000>;
 	};

 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;

 		/*
 		 * 12 MiB reserved for OP-TEE (BL32)
 		 * +-----------------------+ 0x43e0_0000
 		 * |      SHMEM 2MiB       |
 		 * +-----------------------+ 0x43c0_0000
 		 * |        | TA_RAM  8MiB |
 		 * + TZDRAM +--------------+ 0x4340_0000
 		 * |        | TEE_RAM 2MiB |
 		 * +-----------------------+ 0x4320_0000
 		 */
 		optee_reserved: optee@43200000 {
 			no-map;
 			reg = <0 0x43200000 0 0x00c00000>;
 		};

 		scp_mem: memory@50000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0x50000000 0 0x2900000>;
 			no-map;
 		};

 		vpu_mem: memory@53000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0x53000000 0 0x1400000>; /* 20 MB */
 		};

 		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
 		bl31_secmon_mem: memory@54600000 {
 			no-map;
 			reg = <0 0x54600000 0x0 0x200000>;
 		};

 		snd_dma_mem: memory@60000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0x60000000 0 0x1100000>;
 			no-map;
 		};

 		apu_mem: memory@62000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0x62000000 0 0x1400000>; /* 20 MB */
 		};
 	};
 };

 &eth {
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethernet_phy0>;
 	snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>;
 	snps,reset-delays-us = <0 10000 80000>;
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&eth_default_pins>;
 	pinctrl-1 = <&eth_sleep_pins>;
 	status = "okay";

 	mdio {
 		ethernet_phy0: ethernet-phy@1 {
 			reg = <0x1>;
 		};
 	};
 };

 &i2c6 {
 	clock-frequency = <400000>;
 	pinctrl-0 = <&i2c6_pins>;
 	pinctrl-names = "default";
 	status = "okay";

 	mt6360: pmic@34 {
 		compatible = "mediatek,mt6360";
 		reg = <0x34>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
 		interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-names = "IRQB";

 		charger {
 			compatible = "mediatek,mt6360-chg";
 			richtek,vinovp-microvolt = <14500000>;

 			otg_vbus_regulator: usb-otg-vbus-regulator {
 				regulator-compatible = "usb-otg-vbus";
 				regulator-name = "usb-otg-vbus";
 				regulator-min-microvolt = <4425000>;
 				regulator-max-microvolt = <5825000>;
 			};
 		};

 		regulator {
 			compatible = "mediatek,mt6360-regulator";
 			LDO_VIN3-supply = <&mt6360_buck2>;

 			mt6360_buck1: buck1 {
 				regulator-compatible = "BUCK1";
 				regulator-name = "mt6360,buck1";
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1300000>;
 				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
 							   MT6360_OPMODE_LP
 							   MT6360_OPMODE_ULP>;
 				regulator-always-on;
 			};

 			mt6360_buck2: buck2 {
 				regulator-compatible = "BUCK2";
 				regulator-name = "mt6360,buck2";
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1300000>;
 				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
 							   MT6360_OPMODE_LP
 							   MT6360_OPMODE_ULP>;
 				regulator-always-on;
 			};

 			mt6360_ldo1: ldo1 {
 				regulator-compatible = "LDO1";
 				regulator-name = "mt6360,ldo1";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3600000>;
 				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
 							   MT6360_OPMODE_LP>;
 			};

 			mt6360_ldo2: ldo2 {
 				regulator-compatible = "LDO2";
 				regulator-name = "mt6360,ldo2";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3600000>;
 				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
 							   MT6360_OPMODE_LP>;
 			};

 			mt6360_ldo3: ldo3 {
 				regulator-compatible = "LDO3";
 				regulator-name = "mt6360,ldo3";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3600000>;
 				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
 							   MT6360_OPMODE_LP>;
 			};

 			mt6360_ldo5: ldo5 {
 				regulator-compatible = "LDO5";
 				regulator-name = "mt6360,ldo5";
 				regulator-min-microvolt = <2700000>;
 				regulator-max-microvolt = <3600000>;
 				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
 							   MT6360_OPMODE_LP>;
 			};

 			mt6360_ldo6: ldo6 {
 				regulator-compatible = "LDO6";
 				regulator-name = "mt6360,ldo6";
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <2100000>;
 				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
 							   MT6360_OPMODE_LP>;
 			};

 			mt6360_ldo7: ldo7 {
 				regulator-compatible = "LDO7";
 				regulator-name = "mt6360,ldo7";
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <2100000>;
 				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
 							   MT6360_OPMODE_LP>;
 				regulator-always-on;
 			};
 		};
 	};
 };

 &mmc0 {
 	status = "okay";
 	pinctrl-names = "default", "state_uhs";
 	pinctrl-0 = <&mmc0_default_pins>;
 	pinctrl-1 = <&mmc0_uhs_pins>;
 	bus-width = <8>;
 	max-frequency = <200000000>;
 	cap-mmc-highspeed;
 	mmc-hs200-1_8v;
 	mmc-hs400-1_8v;
 	cap-mmc-hw-reset;
 	no-sdio;
 	no-sd;
 	hs400-ds-delay = <0x14c11>;
 	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
 	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
 	non-removable;
 };

 &mmc1 {
 	pinctrl-names = "default", "state_uhs";
 	pinctrl-0 = <&mmc1_default_pins>;
 	pinctrl-1 = <&mmc1_uhs_pins>;
 	cd-gpios = <&pio 129 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
 	max-frequency = <200000000>;
 	cap-sd-highspeed;
 	sd-uhs-sdr50;
 	sd-uhs-sdr104;
 	vmmc-supply = <&mt6360_ldo5>;
 	vqmmc-supply = <&mt6360_ldo3>;
 	status = "okay";
 };

 &mt6359_vbbck_ldo_reg {
 	regulator-always-on;
 };

 &mt6359_vcore_buck_reg {
 	regulator-always-on;
 };

 &mt6359_vgpu11_buck_reg {
 	regulator-always-on;
 };

 &mt6359_vproc1_buck_reg {
 	regulator-always-on;
 };

 &mt6359_vproc2_buck_reg {
 	regulator-always-on;
 };

 &mt6359_vpu_buck_reg {
 	regulator-always-on;
 };

 &mt6359_vrf12_ldo_reg {
 	regulator-always-on;
 };

 &mt6359_vsram_md_ldo_reg {
 	regulator-always-on;
 };

 &mt6359_vsram_others_ldo_reg {
 	regulator-always-on;
 };

 &pio {
 	eth_default_pins: eth-default-pins {
 		pins-txd {
 			pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>,
 				 <PINMUX_GPIO78__FUNC_GBE_TXD2>,
 				 <PINMUX_GPIO79__FUNC_GBE_TXD1>,
 				 <PINMUX_GPIO80__FUNC_GBE_TXD0>;
 			drive-strength = <MTK_DRIVE_8mA>;
 		};
 		pins-cc {
 			pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
 				 <PINMUX_GPIO88__FUNC_GBE_TXEN>,
 				 <PINMUX_GPIO87__FUNC_GBE_RXDV>,
 				 <PINMUX_GPIO86__FUNC_GBE_RXC>;
 			drive-strength = <MTK_DRIVE_8mA>;
 		};
 		pins-rxd {
 			pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
 				 <PINMUX_GPIO82__FUNC_GBE_RXD2>,
 				 <PINMUX_GPIO83__FUNC_GBE_RXD1>,
 				 <PINMUX_GPIO84__FUNC_GBE_RXD0>;
 		};
 		pins-mdio {
 			pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>,
 				 <PINMUX_GPIO90__FUNC_GBE_MDIO>;
 			input-enable;
 		};
 		pins-power {
 			pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
 				 <PINMUX_GPIO92__FUNC_GPIO92>;
 			output-high;
 		};
 	};

 	eth_sleep_pins: eth-sleep-pins {
 		pins-txd {
 			pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
 				 <PINMUX_GPIO78__FUNC_GPIO78>,
 				 <PINMUX_GPIO79__FUNC_GPIO79>,
 				 <PINMUX_GPIO80__FUNC_GPIO80>;
 		};
 		pins-cc {
 			pinmux = <PINMUX_GPIO85__FUNC_GPIO85>,
 				 <PINMUX_GPIO88__FUNC_GPIO88>,
 				 <PINMUX_GPIO87__FUNC_GPIO87>,
 				 <PINMUX_GPIO86__FUNC_GPIO86>;
 		};
 		pins-rxd {
 			pinmux = <PINMUX_GPIO81__FUNC_GPIO81>,
 				 <PINMUX_GPIO82__FUNC_GPIO82>,
 				 <PINMUX_GPIO83__FUNC_GPIO83>,
 				 <PINMUX_GPIO84__FUNC_GPIO84>;
 		};
 		pins-mdio {
 			pinmux = <PINMUX_GPIO89__FUNC_GPIO89>,
 				 <PINMUX_GPIO90__FUNC_GPIO90>;
 			input-disable;
 			bias-disable;
 		};
 	};

 	gpio_keys_pins: gpio-keys-pins {
 		pins {
 			pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
 			input-enable;
 		};
 	};

 	i2c6_pins: i2c6-pins {
 		pins {
 			pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
 				 <PINMUX_GPIO26__FUNC_SCL6>;
 			bias-pull-up;
 		};
 	};

 	mmc0_default_pins: mmc0-default-pins {
 		pins-clk {
 			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
 			drive-strength = <MTK_DRIVE_6mA>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};

 		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
 				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
 				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
 				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
 				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
 				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
 				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
 				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
 				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
 			input-enable;
 			drive-strength = <MTK_DRIVE_6mA>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};

 		pins-rst {
 			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
 			drive-strength = <MTK_DRIVE_6mA>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 	};

 	mmc0_uhs_pins: mmc0-uhs-pins {
 		pins-clk {
 			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
 			drive-strength = <MTK_DRIVE_8mA>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};

 		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
 				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
 				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
 				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
 				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
 				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
 				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
 				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
 				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
 			input-enable;
 			drive-strength = <MTK_DRIVE_8mA>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};

 		pins-ds {
 			pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
 			drive-strength = <MTK_DRIVE_8mA>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};

 		pins-rst {
 			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
 			drive-strength = <MTK_DRIVE_8mA>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 	};

 	mmc1_default_pins: mmc1-default-pins {
 		pins-clk {
 			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
 			drive-strength = <MTK_DRIVE_8mA>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};

 		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
 				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
 				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
 				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
 				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
 			input-enable;
 			drive-strength = <MTK_DRIVE_8mA>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};

 		pins-insert {
 			pinmux = <PINMUX_GPIO129__FUNC_GPIO129>;
 			bias-pull-up;
 		};
 	};

 	mmc1_uhs_pins: mmc1-uhs-pins {
 		pins-clk {
 			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
 			drive-strength = <MTK_DRIVE_8mA>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};

 		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
 				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
 				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
 				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
 				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
 			input-enable;
 			drive-strength = <MTK_DRIVE_8mA>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 	};

 	uart0_pins: uart0-pins {
 		pins {
 			pinmux = <PINMUX_GPIO98__FUNC_UTXD0>,
 				 <PINMUX_GPIO99__FUNC_URXD0>;
 		};
 	};

 	uart1_pins: uart1-pins {
 		pins {
 			pinmux = <PINMUX_GPIO102__FUNC_UTXD1>,
 				 <PINMUX_GPIO103__FUNC_URXD1>;
 		};
 	};
 };


 &pmic {
 	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
 };

 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins>;
 	status = "okay";
 };

 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart1_pins>;
 	status = "okay";
 };

 &u3phy0 {
 	status = "okay";
 };

 &u3phy1 {
 	status = "okay";
 };

 &u3phy2 {
 	status = "okay";
 };

 &u3phy3 {
 	status = "okay";
 };

 &ssusb0 {
 	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	status = "okay";
 };

 &ssusb2 {
 	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	status = "okay";
 };

 &ssusb3 {
 	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	status = "okay";
 };

 &xhci0 {
 	vbus-supply = <&otg_vbus_regulator>;
 	status = "okay";
 };

 &xhci1 {
 	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	status = "okay";
 };

 &xhci2 {
 	status = "okay";
 };

 &xhci3 {
 	status = "okay";
 };
	// SPDX-License-Identifier: (GPL-2.0 OR MIT)
	/*
	* Copyright (C) 2022 BayLibre, SAS.
	* Author: Fabien Parent <fparent@baylibre.com>
	*/
	/dts-v1/;

	#include "mt8195.dtsi"
	#include "mt6359.dtsi"

	#include <dt-bindings/gpio/gpio.h>
	#include <dt-bindings/input/input.h>
	#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
	#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>

	/ {
	model = "MediaTek MT8195 demo board";
	compatible = "mediatek,mt8195-demo", "mediatek,mt8195";

	aliases {
	serial0 = &uart0;
	};

	chosen {
	stdout-path = "serial0:921600n8";
	};

	firmware {
	optee {
	compatible = "linaro,optee-tz";
	method = "smc";
	};
	};

	gpio-keys {
	compatible = "gpio-keys";
	pinctrl-names = "default";
	pinctrl-0 = <&gpio_keys_pins>;

	key-0 {
	gpios = <&pio 106 GPIO_ACTIVE_LOW>;
	label = "volume_up";
	linux,code = <KEY_VOLUMEUP>;
	wakeup-source;
	debounce-interval = <15>;
	};
	};

	memory@40000000 {
	device_type = "memory";
	reg = <0 0x40000000 0x2 0x00000000>;
	};

	reserved-memory {
	#address-cells = <2>;
	#size-cells = <2>;
	ranges;

	/*
	* 12 MiB reserved for OP-TEE (BL32)
	* +-----------------------+ 0x43e0_0000
	* \| SHMEM 2MiB \|
	* +-----------------------+ 0x43c0_0000
	* \| \| TA_RAM 8MiB \|
	* + TZDRAM +--------------+ 0x4340_0000
	* \| \| TEE_RAM 2MiB \|
	* +-----------------------+ 0x4320_0000
	*/
	optee_reserved: optee@43200000 {
	no-map;
	reg = <0 0x43200000 0 0x00c00000>;
	};

	scp_mem: memory@50000000 {
	compatible = "shared-dma-pool";
	reg = <0 0x50000000 0 0x2900000>;
	no-map;
	};

	vpu_mem: memory@53000000 {
	compatible = "shared-dma-pool";
	reg = <0 0x53000000 0 0x1400000>; /* 20 MB */
	};

	/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
	bl31_secmon_mem: memory@54600000 {
	no-map;
	reg = <0 0x54600000 0x0 0x200000>;
	};

	snd_dma_mem: memory@60000000 {
	compatible = "shared-dma-pool";
	reg = <0 0x60000000 0 0x1100000>;
	no-map;
	};

	apu_mem: memory@62000000 {
	compatible = "shared-dma-pool";
	reg = <0 0x62000000 0 0x1400000>; /* 20 MB */
	};
	};
	};

	&eth {
	phy-mode = "rgmii-id";
	phy-handle = <&ethernet_phy0>;
	snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>;
	snps,reset-delays-us = <0 10000 80000>;
	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&eth_default_pins>;
	pinctrl-1 = <&eth_sleep_pins>;
	status = "okay";

	mdio {
	ethernet_phy0: ethernet-phy@1 {
	reg = <0x1>;
	};
	};
	};

	&i2c6 {
	clock-frequency = <400000>;
	pinctrl-0 = <&i2c6_pins>;
	pinctrl-names = "default";
	status = "okay";

	mt6360: pmic@34 {
	compatible = "mediatek,mt6360";
	reg = <0x34>;
	interrupt-controller;
	#interrupt-cells = <1>;
	interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>;
	interrupt-names = "IRQB";

	charger {
	compatible = "mediatek,mt6360-chg";
	richtek,vinovp-microvolt = <14500000>;

	otg_vbus_regulator: usb-otg-vbus-regulator {
	regulator-compatible = "usb-otg-vbus";
	regulator-name = "usb-otg-vbus";
	regulator-min-microvolt = <4425000>;
	regulator-max-microvolt = <5825000>;
	};
	};

	regulator {
	compatible = "mediatek,mt6360-regulator";
	LDO_VIN3-supply = <&mt6360_buck2>;

	mt6360_buck1: buck1 {
	regulator-compatible = "BUCK1";
	regulator-name = "mt6360,buck1";
	regulator-min-microvolt = <300000>;
	regulator-max-microvolt = <1300000>;
	regulator-allowed-modes = <MT6360_OPMODE_NORMAL
	MT6360_OPMODE_LP
	MT6360_OPMODE_ULP>;
	regulator-always-on;
	};

	mt6360_buck2: buck2 {
	regulator-compatible = "BUCK2";
	regulator-name = "mt6360,buck2";
	regulator-min-microvolt = <300000>;
	regulator-max-microvolt = <1300000>;
	regulator-allowed-modes = <MT6360_OPMODE_NORMAL
	MT6360_OPMODE_LP
	MT6360_OPMODE_ULP>;
	regulator-always-on;
	};

	mt6360_ldo1: ldo1 {
	regulator-compatible = "LDO1";
	regulator-name = "mt6360,ldo1";
	regulator-min-microvolt = <1200000>;
	regulator-max-microvolt = <3600000>;
	regulator-allowed-modes = <MT6360_OPMODE_NORMAL
	MT6360_OPMODE_LP>;
	};

	mt6360_ldo2: ldo2 {
	regulator-compatible = "LDO2";
	regulator-name = "mt6360,ldo2";
	regulator-min-microvolt = <1200000>;
	regulator-max-microvolt = <3600000>;
	regulator-allowed-modes = <MT6360_OPMODE_NORMAL
	MT6360_OPMODE_LP>;
	};

	mt6360_ldo3: ldo3 {
	regulator-compatible = "LDO3";
	regulator-name = "mt6360,ldo3";
	regulator-min-microvolt = <1200000>;
	regulator-max-microvolt = <3600000>;
	regulator-allowed-modes = <MT6360_OPMODE_NORMAL
	MT6360_OPMODE_LP>;
	};

	mt6360_ldo5: ldo5 {
	regulator-compatible = "LDO5";
	regulator-name = "mt6360,ldo5";
	regulator-min-microvolt = <2700000>;
	regulator-max-microvolt = <3600000>;
	regulator-allowed-modes = <MT6360_OPMODE_NORMAL
	MT6360_OPMODE_LP>;
	};

	mt6360_ldo6: ldo6 {
	regulator-compatible = "LDO6";
	regulator-name = "mt6360,ldo6";
	regulator-min-microvolt = <500000>;
	regulator-max-microvolt = <2100000>;
	regulator-allowed-modes = <MT6360_OPMODE_NORMAL
	MT6360_OPMODE_LP>;
	};

	mt6360_ldo7: ldo7 {
	regulator-compatible = "LDO7";
	regulator-name = "mt6360,ldo7";
	regulator-min-microvolt = <500000>;
	regulator-max-microvolt = <2100000>;
	regulator-allowed-modes = <MT6360_OPMODE_NORMAL
	MT6360_OPMODE_LP>;
	regulator-always-on;
	};
	};
	};
	};

	&mmc0 {
	status = "okay";
	pinctrl-names = "default", "state_uhs";
	pinctrl-0 = <&mmc0_default_pins>;
	pinctrl-1 = <&mmc0_uhs_pins>;
	bus-width = <8>;
	max-frequency = <200000000>;
	cap-mmc-highspeed;
	mmc-hs200-1_8v;
	mmc-hs400-1_8v;
	cap-mmc-hw-reset;
	no-sdio;
	no-sd;
	hs400-ds-delay = <0x14c11>;
	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
	non-removable;
	};

	&mmc1 {
	pinctrl-names = "default", "state_uhs";
	pinctrl-0 = <&mmc1_default_pins>;
	pinctrl-1 = <&mmc1_uhs_pins>;
	cd-gpios = <&pio 129 GPIO_ACTIVE_LOW>;
	bus-width = <4>;
	max-frequency = <200000000>;
	cap-sd-highspeed;
	sd-uhs-sdr50;
	sd-uhs-sdr104;
	vmmc-supply = <&mt6360_ldo5>;
	vqmmc-supply = <&mt6360_ldo3>;
	status = "okay";
	};

	&mt6359_vbbck_ldo_reg {
	regulator-always-on;
	};

	&mt6359_vcore_buck_reg {
	regulator-always-on;
	};

	&mt6359_vgpu11_buck_reg {
	regulator-always-on;
	};

	&mt6359_vproc1_buck_reg {
	regulator-always-on;
	};

	&mt6359_vproc2_buck_reg {
	regulator-always-on;
	};

	&mt6359_vpu_buck_reg {
	regulator-always-on;
	};

	&mt6359_vrf12_ldo_reg {
	regulator-always-on;
	};

	&mt6359_vsram_md_ldo_reg {
	regulator-always-on;
	};

	&mt6359_vsram_others_ldo_reg {
	regulator-always-on;
	};

	&pio {
	eth_default_pins: eth-default-pins {
	pins-txd {
	pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>,
	<PINMUX_GPIO78__FUNC_GBE_TXD2>,
	<PINMUX_GPIO79__FUNC_GBE_TXD1>,
	<PINMUX_GPIO80__FUNC_GBE_TXD0>;
	drive-strength = <MTK_DRIVE_8mA>;
	};
	pins-cc {
	pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
	<PINMUX_GPIO88__FUNC_GBE_TXEN>,
	<PINMUX_GPIO87__FUNC_GBE_RXDV>,
	<PINMUX_GPIO86__FUNC_GBE_RXC>;
	drive-strength = <MTK_DRIVE_8mA>;
	};
	pins-rxd {
	pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
	<PINMUX_GPIO82__FUNC_GBE_RXD2>,
	<PINMUX_GPIO83__FUNC_GBE_RXD1>,
	<PINMUX_GPIO84__FUNC_GBE_RXD0>;
	};
	pins-mdio {
	pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>,
	<PINMUX_GPIO90__FUNC_GBE_MDIO>;
	input-enable;
	};
	pins-power {
	pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
	<PINMUX_GPIO92__FUNC_GPIO92>;
	output-high;
	};
	};

	eth_sleep_pins: eth-sleep-pins {
	pins-txd {
	pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
	<PINMUX_GPIO78__FUNC_GPIO78>,
	<PINMUX_GPIO79__FUNC_GPIO79>,
	<PINMUX_GPIO80__FUNC_GPIO80>;
	};
	pins-cc {
	pinmux = <PINMUX_GPIO85__FUNC_GPIO85>,
	<PINMUX_GPIO88__FUNC_GPIO88>,
	<PINMUX_GPIO87__FUNC_GPIO87>,
	<PINMUX_GPIO86__FUNC_GPIO86>;
	};
	pins-rxd {
	pinmux = <PINMUX_GPIO81__FUNC_GPIO81>,
	<PINMUX_GPIO82__FUNC_GPIO82>,
	<PINMUX_GPIO83__FUNC_GPIO83>,
	<PINMUX_GPIO84__FUNC_GPIO84>;
	};
	pins-mdio {
	pinmux = <PINMUX_GPIO89__FUNC_GPIO89>,
	<PINMUX_GPIO90__FUNC_GPIO90>;
	input-disable;
	bias-disable;
	};
	};

	gpio_keys_pins: gpio-keys-pins {
	pins {
	pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
	input-enable;
	};
	};

	i2c6_pins: i2c6-pins {
	pins {
	pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
	<PINMUX_GPIO26__FUNC_SCL6>;
	bias-pull-up;
	};
	};

	mmc0_default_pins: mmc0-default-pins {
	pins-clk {
	pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
	drive-strength = <MTK_DRIVE_6mA>;
	bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
	};

	pins-cmd-dat {
	pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
	<PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
	<PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
	<PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
	<PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
	<PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
	<PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
	<PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
	<PINMUX_GPIO121__FUNC_MSDC0_CMD>;
	input-enable;
	drive-strength = <MTK_DRIVE_6mA>;
	bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
	};

	pins-rst {
	pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
	drive-strength = <MTK_DRIVE_6mA>;
	bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
	};
	};

	mmc0_uhs_pins: mmc0-uhs-pins {
	pins-clk {
	pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
	drive-strength = <MTK_DRIVE_8mA>;
	bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
	};

	pins-cmd-dat {
	pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
	<PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
	<PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
	<PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
	<PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
	<PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
	<PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
	<PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
	<PINMUX_GPIO121__FUNC_MSDC0_CMD>;
	input-enable;
	drive-strength = <MTK_DRIVE_8mA>;
	bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
	};

	pins-ds {
	pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
	drive-strength = <MTK_DRIVE_8mA>;
	bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
	};

	pins-rst {
	pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
	drive-strength = <MTK_DRIVE_8mA>;
	bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
	};
	};

	mmc1_default_pins: mmc1-default-pins {
	pins-clk {
	pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
	drive-strength = <MTK_DRIVE_8mA>;
	bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
	};

	pins-cmd-dat {
	pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
	<PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
	<PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
	<PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
	<PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
	input-enable;
	drive-strength = <MTK_DRIVE_8mA>;
	bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
	};

	pins-insert {
	pinmux = <PINMUX_GPIO129__FUNC_GPIO129>;
	bias-pull-up;
	};
	};

	mmc1_uhs_pins: mmc1-uhs-pins {
	pins-clk {
	pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
	drive-strength = <MTK_DRIVE_8mA>;
	bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
	};

	pins-cmd-dat {
	pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
	<PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
	<PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
	<PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
	<PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
	input-enable;
	drive-strength = <MTK_DRIVE_8mA>;
	bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
	};
	};

	uart0_pins: uart0-pins {
	pins {
	pinmux = <PINMUX_GPIO98__FUNC_UTXD0>,
	<PINMUX_GPIO99__FUNC_URXD0>;
	};
	};

	uart1_pins: uart1-pins {
	pins {
	pinmux = <PINMUX_GPIO102__FUNC_UTXD1>,
	<PINMUX_GPIO103__FUNC_URXD1>;
	};
	};
	};


	&pmic {
	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
	};

	&uart0 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart0_pins>;
	status = "okay";
	};

	&uart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart1_pins>;
	status = "okay";
	};

	&u3phy0 {
	status = "okay";
	};

	&u3phy1 {
	status = "okay";
	};

	&u3phy2 {
	status = "okay";
	};

	&u3phy3 {
	status = "okay";
	};

	&ssusb0 {
	vusb33-supply = <&mt6359_vusb_ldo_reg>;
	status = "okay";
	};

	&ssusb2 {
	vusb33-supply = <&mt6359_vusb_ldo_reg>;
	status = "okay";
	};

	&ssusb3 {
	vusb33-supply = <&mt6359_vusb_ldo_reg>;
	status = "okay";
	};

	&xhci0 {
	vbus-supply = <&otg_vbus_regulator>;
	status = "okay";
	};

	&xhci1 {
	vusb33-supply = <&mt6359_vusb_ldo_reg>;
	status = "okay";
	};

	&xhci2 {
	status = "okay";
	};

	&xhci3 {
	status = "okay";
	};